Satellite L40-139: new graphics driver is causing the problem after waking from sleep
I have a three month old Toshiba Satellite L40-139 (PSL40E) with 1 GB of RAM with Microsoft Windows Vista Home Premium pre-installed. This laptop worked very well for me for the basic headquarters far tasks, and I would have no problem recommending.
In the last days I've updated the software and drivers from the Microsoft Update web site.
Since the update driver Mobile Intel(r) 945 Express Chipset Family (to version 220.127.116.110, dated October 18, 2007), the screen resolution at 800 x 600 after awakening from the sleep state. The only way I found to fix it is to restart the PC.
Other articles published on the web, I understand that this particular driver (Mobile Intel(r) 945 Express Chipset Family driver 18.104.22.1680 version) has caused many other problems on a variety of hardware and software platforms.
Does anyone have a definitive solution for Satellite L40?
I looked at four options.
1. let the new installed driver and restart Windows each time after waking up from sleep mode. Rather, I must not do this.
2. using the Restore Point created by Windows Update before the update of the driver, roll back to an earlier time. This seems to be a good course if it works.
3 download an older version of the driver and reinstall it. I don't know which version would work but note that others have had success with the 22.214.171.1240 version. I guess a similar version could be included in the driver Package that can be downloaded from Toshiba Europe site, but have heard that the time required to download this software can exceed ten hours and am therefore reluctant to try.
4. the fourth option is not really possible. I should be able to "Roll-Back" the driver in Device Manager, but the button is disabled.
Although only a minor problem, it is very irritating and I would like to address them without causing other problems. Does anyone else have this problem? Someone has fixed it successfully?
If I understand correctly, you use your usual laptop for daily work and you don't need any computer high-performance notebook. If I'm right I have to say that you should be happy if the laptop works well and stable.
I don't really see any reason why you wanted to update chipset driver. In any case, you should try to roll back the BONES of time earlier and I hope everything will work again. There is absolutely no risk, and you can test it.
Please post the result.
I'm having this problem:
The LCD screen may be empty when the computer is "awakened" from the sleep state. Nothing is visible on the internal LCD or an external monitor.
There seems to be a solution:
An update of the firmware for a component in the main circuit of the computer solves this problem. This update must be performed by an authorized Toshiba (ASP) Service provider. Until arrangements are made for the update, restart the computer by pressing the power on button for a few seconds.
described here: [white screen after awakening from fallback status | http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_dtlView.jsp?soid=1642844&moid=1209152]
I also found this, but it didn't really help me much further.
[Satellite P200D and WinXP: no display after waking from sleep mode | http://forums.computers.toshiba-europe.com/forums/click.jspa?searchID=880412&messageID=118143]
In fact, I think I'm able to solve myself, and I don't like not my laptop to be gone for two weeks or more. I just need some advice on where to find a correct upgrade. Is - this driver BIOS or graphics? Which version should download, where... etcetera. More tips on how to solve the problem are also welcome.
Edit: link and no need for words of line. : s
Edit2: grammar correction.
> An update of firmware for a component in the main circuit of the computer solves this problem. This update must be performed by an authorized Toshiba (ASP) Service provider. Until arrangements are made for the update, restart the computer by pressing the power on button for a few seconds.
If you check the Toshiba document you would see that your Satellite P300 is not related to this issue.
In your case I would recommend upgrading the BIOS and graphics driver.
In addition to keep your operating system up-to-date.
I had this problem under Win XP and a MS patch and an update of the graphics card driver helped solve this problem.
SATELLITE T110 Bluetooth will fail after awakening from sleep.
The icon will be flick between white and green as he seeks my device (phone).
I ve reduced the problem to the laptop, because if I try to pair again phone to the laptop it fails. It's almost like he has a block?
Operate as planned, then I have to charge fully.
Bluetooth connects then as planned.
It only became a problem because I installed the latest BIOS v 2.40
I use the 64-bit Version.
When the problem occurs I run the Bluetooth Diagnostics and it comes back as fine no error reported. It s a pain now because I use the laptop mode "sleep" more off.
This is due to the new update of the bios.
Can you after waking from sleep just restart BT stack and try to connect to the mobile phone?
You mean that with the old version of the BIOS, everything was OK?
Last question: what was the reason for the update of the BIOS? I hope not the fact you want to have the latest version.
My powers of Satellite A660-18 wide for 2-3 seconds after waking from sleep. I upgraded the memory from 4 GB to 8 GB, using the site of Crucial, so I know it is compatible. BIOS is updated to 2.00.
Don't know what to do, how can I fix without turning off completely from mode "sleep"?
> I upgraded the memory from 4 GB to 8 GB
And have you had the problem before you upgrade memory too or as memory upgrade?
DRIVER_LEFT_LOCKED_PAGES_IN_PROCESS, STOP: 0X000000CB (0 X 82478022, 0X93211B98, 0X870C7DED, 0 X 00000033). I'm not able to determine which driver is causing the problem
I get a blue screen everytime I reboot my laptop. I run Win Vista. The error I get is DRIVER_LEFT_LOCKED_PAGES_IN_PROCESS, STOP: 0X000000CB (0 X 82478022, 0X93211B98, 0X870C7DED, 0 X 00000033). I am not able to know which driver is causing this problem, please help. Thank you
In addition, it can help to look at the files minidump against accidents with a debugger.
Can you zip the minidump in the C:\Windows\Minidump folder files and (provide link) available via Windows Live SkyDrive or similar site?
The following link has information about the use of Windows Live SkyDrive:
If you have problems to compress the minidump files copy the minidump files to another location such as a folder on the desktop
In addition, you do not necessarily have compress the minidump files, you can download one at a time.
Original title: unable to system restore
After the unexpected stop down and try the system restore. I got up a window pops that says update my KASPERSKY anti-virus program, I do not have KASPERSKY. Another said unspecified changes "caudate root found" SYS CONFIG window may have caused the problem. Any ideas? I have Vista and Trend Micro Internet security
1. are you able to boot into normal mode after receiving these error messages?
You can try these steps and see if it helps.
You can check if the problem occurs in safe mode with network.
If you do not experience the problem in safe mode with network, then you can read the following article to download the Microsoft Safety Scanner and analysis complete on your computer.
Note: When you perform the analysis, there are chances of losing the data that you can take a backup of important data before performing analysis.
Hope this information is useful.
I found the new driver for the Mobile Intel 965 Express Chipset (driver 126.96.36.1996) on the website of intel, but I can't install it because it's not original Toshiba.
I'm doing this because we're on the website of toshiba is pilot about a year.
Does anyone have an idea how to install the latest driver for my laptop Satellite U400-112?
Generally, you can install the drivers Toshiba not only at your own risk.
So if something will go wrong because of drivers Toshiba not then your warranty does not cover this.
So this was a brief info about drivers not Toshiba.
Now how do I install the driver;
You can do so from the Device Manager. Go to the Device Manager. Choose the graphics card and to update the driver. Then a new window should open. Then, choose the Advanced installation procedure. Then choose don't search. I will choose the driver. Then point to the new Intel driver downloaded and applied.
I have a Toshiba Satellite P750/05q with a Nvidia GT540M graphics card.
Toshiba drivers are quite old compared to the generic drivers from Nvidia, but I read that I should only use the Toshiba drivers.
So Toshiba never updates its graphics drivers, or am I stuck with the same driver for the life of the computer?
This common problem of s with portable machines. Manufacturers of portable don t offer display drivers updated. All this is quite complicated because of the design of laptops and cooling system.
>... or am I stuck with the same driver for the life of the computer?
I'm afraid, you're right about m.
My CD drive does not appear in my computer and when I use the Device Manager I see a yellow box with an exclamation point get this message when I go to its properties
Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)
-What this means and how can it be solved?
I think this question has been asked 100 times in the last two months and you can find the answer in two minutes only by using advanced search option.
But once again for you - http://aps2.toshiba-tro.de/kb0/FAQ8101LA0000R01.htm
My Toshiba Satellite Pro M30 is 4 years old with a 60 GB hard drive (IDE).
I would like to replace the hard drive with a bigger. What is the best? (BIOS version 1.70, Windows XP Pro SP 3).
I would be happy not only to get the answer to my question but alos to where I might find the answer myself.
Thanks and greetings
As far as I know the laptop is equipped with an ATA-100 IDE / ATA-6 HARD drive controller.
In this case, you will need to use the 2.5 IDE HARD drive.
I know with certainty that this notebook would support 80 GB HDD, but generally a larger HARD drive should also be possible because the controller is able to manage the 48-bit LBA.
The 48-bit LBA can handle hard drives of more than 120GB.
In my opinion, you can try a 120 GB and also 160 GB HARD drive should be possible.
Satellite A210-15J, RAM 2x2gb, BIOS v1.70, Vista Ultimate x 64 SP1 (with all hotfixes), driver audio Realtek v.2.01.
After the Windows Vista recovery, high-definition audio (HDA) device is not working properly. There is no sound, only noise.
This FAQ from Toshiba document may help you:
[High definition audio device may no longer work after resume Windows Vista from hibernation or standby | http://aps2.toshiba-tro.de/kb0/TSB7601WX0004R01.htm]
_The solution is simply: _
You must download and install the fix from Microsoft site 937077.
See you soon
Hello. I need help! I'm having trouble with the laptop Satellite M200 (Vista) - after the awakening of the mode standby, none of the things connected to the USB port is detected, even if they worked perfectly before sleep. No mass reader, mouse, iPod is detected - even the SD for ready boost is not detected. Simple plug in and out calls any action (window AutoPlay etc.). Sounds like a BIOS problem but my laptop is completely up-to-date with all drivers and all the rest (of Windows and Toshiba support website). Would appreciate any advice. See you soon.
> fully up-to-date with all the drivers and everything else
The latest version of the BIOS too?
Have a problem with my Toshiba Sat Pro L850 PSKG9A - 001 00C
Whenever I close my laptop screen and put the computer to sleep, then then wake him up once again.
My screen is at MAX brightness (blinding close) and I can't change it with my keyboard shortcuts and it said brightness is at level 1!
PLEASE HELP THANKS
You can change it in some power plan settings you use?
I have Satellite L40-139 under Vista Home Premium.
The laptop doesn't have a Firewire interface. He has a 54mm Express card slot. I would like to add a Firewire interface, so I can import video from a camcorder. If I understand correctly, it should be possible to install an Express card (34mm or 54mm will fit) which will provide the Firewire inputs.
Although there are a lot of these cards on the market, there are also many stories of them does not not with Vista or some Toshiba laptops.
Can someone advise please a card that is known to work with the L-series and with Vista?
Thank you in advance.
> I would like to add a Firewire interface, so I can import video from a camcorder. If I understand correctly, it should be possible to install an Express card (34mm or 54mm will fit) which will provide the Firewire inputs
This is right.
Satellite L40-139 supports ExpressCard location and so you can use an Express which has been equipped with a firewire interface card.
You should google a bit, there are a lot of offers on the internet
For example something like this:
[Express Card + Firewire ports | http://ecx.images-amazon.com/images/I/31%2BkULZc2gL._SS500_.jpg]
See you soon
Please can you send me the link to Satellite L40 ethernet control model of laptop for Windows XP Home edition?
Satellite L40-139 belongs to the PSL40E series. Am I wrong?
You can check the serial number of your laptop. It should be placed somewhere at the bottom of the unit. Check all labels.
Anyway, the Toshiba driver European page doesn't provide XP drivers for this series at this time. Seems you have to wait a bit until all pilots to be released!
For the only moment that two versions of the BIOS for L40 PSL40E if released.
The BIOS must be updated to the XP version, if you want to use XP on this laptop.
By the way; It seems that this series is supported by the Base map - TX Ethernet Realtek 10/100.
Then you can try the LAN driver from the site Web of Realtek. Should also work.
Maybe you are looking for
Does anyone know how to clear cache on the maxx?
Helloam having problem remove current password in hp 110 min
g580 (20150)Windows 8WiFi is not connecting and it shows wifi adapter is missing
I'm a recent user of HP (Office XT249EA). When I'm away from my computer for more than five minutes say it locks and I have to click a button 'Locked' before we get to the HP screen. He also asked if I want to change username (I'm the only user!).