Satellite L40 - 13G has 667 memory but works at 533

Similar Questions

• Need drivers of Windows XP Home for Satellite L40 - 13G

  I need audio drivers for windows XP for satellite L40 - 13G? I try to download it from the site intel and Analog Devices Web site, but it does not work.

  P.S. sorry - but my English is not very well ;-)

  In my opinion, it takes a bit. Toshiba has begun to support of Windows XP Home for new preinstalled Vista laptops but obviously your Satellite L40 is still not on the list. I'm afraid you have to wait his turn.

• Necessary product for satellite L40 - 13G recovery disk

  Need recovery cd of product for satellite L40 - 13G.

  How and where can I get 1: 1 current says boot mgr missing or corrupt and 32 file system unable to load, please help

  Hello

  You can try recovery disk command on https://backupmedia.toshiba.eu/landing.aspx

  Check it out.

• Satellite L40-143 (PSL40E-04E00LGR) - memory upgrade

  I want to upgrade the memory of my laptop: Satellite L40 - 143 Modell Nr.: PSL40E-04E00LGR

  I can find my phone on the support site and the following information for the memory (which is consistent with the information I have):

  Standard: 1,024 (512 + 512) MB
  Max Erweiterbarkeit: 2.048 MB
  Technology: DDR2 RAM (667 MHz)

  I understand I can go to a maximum of 2 GB. I have two questions:

  1. question:
  By clicking on: 'Zubehör' I get the suggestion to buy the next memory:

  1024 MB (1 GB) memory PC2 - 4300 DDR2 (533 MHz) PA3411U-2M1G
  512 MB memory PC2 - 4300 DDR2 (533 MHz) PA3412S - 2M 51

  It is however 533 MhZ DDR2 PC4300, in my manual and on the technical page details it says PC 5300 at 667 MHZ, well? What is the good memory to buy?

  2. question:
  I now have 512 + 512 MB in the notebook. Can I buy a single module 2 GB instead of the two modules of 1 GB?

  Thanks for the replies!

  Hello

  In your case, I would like to buy RAM with the specifications of the user manual. In the worst cases it runs only on 533 MHz but I tried a little with Google and it seems that the laptop is using 667 MHz modules.
  Moreover, I can recommend high-quality Kingston memory.

  Regarding your last question, you can only buy two 1 GB modules. It is the maximum capacity for each RAM module.

• Satellite L40 - 15G has no power and no light

  Hello

  I have a Toshiba Satellite L40 - 15G. The keyboard was very dirty, so I followed the online instructions to remove it:

  Removed the cover that is over the ram and the wireless card has had and took off the two screws now the keyboard (in fact only one is under that cover, the other is on the right...

  I managed to remove the keyboard nicely and mount everything back together...

  Once I plugged the phone into the charger, even when no light appears and computer does not start!

  Any idea what could have gone wrong?

  Thank you

  Hi mate

  Have Hmm you checked the memory modules?
  Please check if the modules are placed correctly.
  You should also check if you connect the keyboard to the motherboard in the right way.

  Sorry mate but it is difficult to say what s going on here maybe you damaged something during the removal of the keyboard.

• Satellite L40 - 13G - need a more powerful battery

  Hello! No, my current battery is PA3591U-1BRS. I need a battery that can give me more than 2 hours of work. Can you advice something?

  Thank you!

  Hello

  I know that the battery (Li-ion, 4 cells, high rate, 2000mAh) PA3591U-1BRS, which is compatible with the Satellite L40.

  If you need a stronger one that you take the appearance on the values of mAh. The higher mAh value means a longer battery life and better performance.

  But unfortunately, I found only the PA3591U-1BRS a compatible framework.

• Satellite L40 - Sleed and standby does not work correctly

  I have a portable Satellite L40 and it worked correctly until now. I turn and after I have put on standby (stand-by) mode; When I want to use my system, so to get that back to normal (I press the turn power button to exit the mode "standby" button), Windows Vista 32-bit restarts - it is not back to the moment I left it before the "sleep mode".

  Therefore, restarting Windows Vista 32-bit, and the screen "Windows has been disabled incorrect" appears instead to return to the configuration of the system that let him before sleep / standby mode.

  What can I do to fix this and make "sleep" mode works correctly?

  Hello!

  In your case, I'd do a BIOS update. You can search for updates on the Toshiba site
  http://EU.computers.Toshiba-Europe.com

  You should also look into the mangment of power. Here, you configure what happened when you close the screen, press the power button and so far.
  I found a great thread on this topic:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=141529𢣙

  Good bye

• Satellite L40 PSL48E FN keys do not work

  I have a laptop Toshiba Satellite L40 PSL48E, and it works perfectly, except that the FN + no matter what key does not work.

  I've been option on this forum, and I found the solution, which is: download the common Module and the Hotkey Utility.
  However, this only seems to work for Windows XP and I have Vista Ultimate, so this won't work.

  Also, I discovered that FN + F11 seems to work, and I searched on that one too, but it was something like:

  «So, go to "Run" (i.e. run an application) and run msconfig.exe or simply search for msconfig.exe.»

  After the opening of this program, you will have a few tabs and a tab should be as 'start-up', it should be the filename TCrdMain.exe and a checkbox before that. Uncheck the box, and you disable this cardmanager.
  "

  Well, I went to msconfig.exe, but TCrdMain.exe was not on the list...

  Someone knows how to fix this?

  Thanks, Koen.

  Hello

  You must update the BIOS is you get the ID_ERR_NOTINSTALLTVALZ_MESSAGE error message during installation of VAP.

  Check it out!

• Re: What is Satellite L40-15B has supported audio CD?

  Hello.

  I use linux on my Toshiba Satellite L40-15 b and there is no sound from an audio CD.
  I spoke with the ALSA community and all the settings of the software seems to be ok. So I have here, I would like to question the material.

  On this Toshiba - cdrom is connected to the sound card?
  It plays audio CDs under Windows? He plays games that use audio cd, said Total Annihilation, under Windows? (unfortunately impossible to verify myself that Windows is long gone from my laptop)

  Would be happy to get an answer, so that I can know for sure if this is a problem with the ALSA Linux drivers or with the hardware of the laptop.

  Andrei.

  Of course, you can listen to the CD on this Satellite L40.
  You can use it as a CD player.

  But you need to start the Windows OS. Without running OS you will not be able to listen to the audio CD

  Good bye

• Satellite L40 - 17O - LED Wireless does not work

  I bought laptop Satellite L40 - 17O a couple of days. Wireless LED doesn't work. It worked the first time after I installed the OS (XP SP2) top, and now it doesn't work. I didn t try again Wi - Fi.

  I don t know is that it works or not. Maybe it's just a problem of LED.
  What do you suggest me?

  The WiFi network works with the original image of preinstalled Toshiba?

  I mean this laptop came with Vista and normally everything should works using the Vista operating system.
  I assume that you need to install a compatible XP WLan driver for notebook simply you all what s

• The update of the BIOS on Satellite L40 - 13G

  Hello everyone!
  I want to update my BIOS, but don't know how to do it. I looked at the instructions on a site:

  Option 2: update with CD-ROM

  1 extract the zip file containing the BIOS upgrade to a temporary folder.
  2. in the folder temporary three subfolders will be generated. "docs", 'Update - 3.5' disc', 'Update - CD - R or CD - RW"
  3. how to make a bootable CD-ROM please read the *.pdf file in the "docs" folder
  4. make sure that the laptop is plugged into the sector.
  5. turn off the laptop.
  6. place the CD-ROM containing the upgrade of the BIOS in the optical disc drive.
  7. turn on the laptop with the F12 key.
  8. the BIOS boot menu appears. Select CD/DVD or CD-ROM symbol with the arrow keys. Press "enter".
  9. the notebook starts from upgrading the BIOS CD.
  10. a boot menu is displayed. Select the point of updating the BIOS by using the arrow keys. Press "enter".
  11. the BIOS update process begins. Do not turn off the laptop during the update.
  12. If the update is complete, follow the instructions on the screen.

  Downloaded this update to the bios: bios - 20070904123621.zip
  Page with the updated file: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_bios.jsp

  Then I unzipped the zip... and don't see three directories, who wrote in the statement (from above).

  Help please, I have to do. Or how can I update my BIOS?

  Thank you!

  Hi Alexey

  Can you please tell me why you need BIOS update? As far as I know Satellite L40 is the new laptop of the L series. Maybe a few days and necessary BIOS update. Why?

  Have you noticed any problems?

• Satellite L40 - 13G: Bios update is not on Vista SP1

  I have a Satellite L40 13 G and the latest Bios update refuse to update.

  I'm trying to update my BIOS because the laptop freezes randomly in time and I have problems of "graphic design" where the lag games where there is no form of explosion such as gunshots or a bomb.

  There are no instructions, not in the exe and certainly not on the screen. If I didn't know how Flash a BIOS I would certainly not choose the .bin BIOS file in the directory between all DLL files.

  Thank you
  Yahweh.

  Hello Jako

  Can you please tell me what your problem is now? What questions are you writing about?
  If I understand you well you have correctly updated the BIOS. Am I right about that?

  And what now? What do you mean?

• Satellite L40 - 13G - after installing XP I have no sound

  I had just got my laptop reformatted with XP Pro service and have no sound. Downloaded drivers for the realtek and still no sound

  Help please

  REDA

  Hello

  Satellite L40 is equipped with a sound card high definition and this means that you need to install SP3 first, then the audio driver.
  SP3 contains two patches from Microsoft you need for this sound card.

  So remove the audio driver installed, install SP3 and then reinstall the audio driver.

• Need to install Windows XP on Satellite L40 - 13G but not a conductor of work

  Unfortunately, my laptop is unable to work in Ukraine with our internet service providers and AU programms.
  So I need to install Windows XP Home edition. And today there is no any available driver WXP to Mohammed's official website.
  After reading some topics of the forum, I saw that it is almost impossible to install WXP.

  Can someone answer me please, can I work on my laptop with Windows XP Home edition? If so, where to download the necessary drivers?

  Help, please

  Hello

  the problem is that windows xp is not supported by this machine toshiba. But if you really need XP, you can try the following:

  1. install 'Virtual PC' on your Vista system and then use your XP Vista or

  2. collect since internet pilots. I want to say is: know what material is built into the machine (e.g. Vga is nvidia geforce-> go to www.nvidia.com, chipset intel-> go to www.intel.com and so on) and you have a machine with features limited under XP.

  This is the point, everything's all right to vista. :(

  Welcome them

• Satellite P750 - 13G - media keys do not work after the installation of Win 7

  I yesterday "Toshiba P750 - 13G" for computer laptop (edition of the European Union) has purchased and installed Win7 x 64 ultimate equal right, because I was on the pre-installed too much waste.
  Since then, however, work 7 special keys (play / pause, cut...) no more. How can I solve this problem?

  And could someone tell me what I install everything in order so that I can use all the features actually?

  Thank you and sorry for my bad English...

  Hello

  > and installed Win7 x 64 ultimate equal right, because I was on the pre installed too much waste.
  Isn t easier to remove that software of the parts that you don't need and to clean the registry with CCleaner to do a full clean install?

  > Since then, however, work 7 special keys (play / pause, cut...) no more. How can I solve this problem?
  The Toshiba VAP (value added package) must be installed to get the buttons working again
  Have you tried that?