Satellite L40-17 t - black screen with error message

Hi friends,

I have Toshiba Satellite L40-17 t with windows vista 32 bit home premium. A few days ago just after my update of Windows.Black emerged with the following screen;

! ! 0xc01001d! ! 37241 / 90758 (\Registry\Machine\COMPONENTS\DerivedData...)

Do County does not completely run either TI stops a few times at 90758 28470. Also I can't retrieve through products and recovery of HARD drive recovery.

Type help at the earliest.

Kind regards
Stéphane

Hello

> Also I am not able to recover through products and recovery of HARD drive recovery

You do not have an image of disk recovery and hard drive missing? :(

> ! 0xc01001d! 37241 / 90758 (\Registry\Machine\COMPONENTS\DerivedData...)

According to this message, the registry is damaged. You will need to reinstall Windows or mount it using the Windows disk copy. If you do not, you can download and try Windows Vista Recovery Disc, it's free.

Post edited by: Jeka-HE

Tags: Toshiba

Similar Questions

  • Using Windows xp system will not start - black screen with error message < root windows > missin \system.dll or corrupt. Replace.

    Using Dell Office tried to reinstall from the disc but the system will accept all orders.  Have all the updates from Mcafee and have not had a problem until this morning.  Short of reformatting is there anything else I can try?

    Hi JLudlow618,

    In addition to the issue in question Jose, follow the troubleshooting steps in this document to resolve your problem.

  • Satellite L850 - 17 k - black screen with blue dots

    Satellite L850 - 17 k black screen with blue dots see photo
    It is THE video card, can't find it.

    See photos

    If you see the same on internal and external display LCD, I presume that the video card is faulty.

  • Satellite A350 - blue screen with error message

    At the start of windows7, I get a blue screen with error message 0 x 0000116.

    Can someone help please?

    It looks like a graphics driver is a troublemaker. Try to reinstall a graphics driver in SafeMode (f8 at startup). Read this article for more information:

    http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/eb584685-6b8b-4ad7-B6CC-ae5ee78095fb

    It is for VISTA but should be the same for win 7 too.

  • I have service pack 3 installed and yet I still have a black screen with the message of counterfeiting

    I have service pack 3 is installed, but I still have a black screen with the message of counterfeiting. I am a beginner of the computer

    Hello

    (1) you are able to log the desktop computer?

    (2) when exactly you get the black screen?

    (3) you receive an error message on black screen?

    (4) have you made any changes to the computer before the show?

    Please provide more information on the issue so that we can better help you.

    In the meantime, try the methods below and check if the problem persists.

    Method 1:

    In case you receive a black screen on startup of the computer, and then try the steps of troubleshooting provided in the link below.

    Computer stops responding with a black screen when you start Windows XP

    http://support.Microsoft.com/kb/314503

    Method 2:

    If you are able to start the computer and you get the black screen at the level of the office without wallpaper then try the procedure described in the link provided below.

    After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

    http://support.Microsoft.com/kb/318027

  • Problem re-installing VISTA after the removal of Windows 8 Preview Release, all I get is a black screen with a message "Not found operating system"

    I recently tried Win 8 on my VAIO laptop spare parts on which I ran Vista, after having previously deleted all the files and documents (I don't use often the laptop). Having concluded that Win8 will really work correctly with a touch screen (and the display size was bad as well), I uninstalled WIN 8, understand that I have to re - install Vista from my rescue disks. This I tried successfully a few months previously to make a clean reinstall. However, after removing 8 WIN via the Control Panel, I can't re - install Vista now. All I get is a black screen with a message "The operating system not found" and the rescue disks do not register. What can I do? I like Vista (although I now run Win 7 on my PC) and really want to put it back. Grateful for the advice.

    Well I finally fixed it by tweaking the BOOT BIOS settings and find something along the lines of VAIO Setup. I'm afraid, I just don't remember exactly what I did, but suddenly I found and ran 'VAIO Hardware Diagnostics' gave me a heart when it announced "no error was detected on the Vaio. Then I saw there was an entry for 'VAIO Recovery Utility - Recovery Wizard' and everything started to load. Since the 2 recovery discs I had. Finally, I ran MS Office and Small Business CD-ROM and now everything is back the way that it used to be. Here I had taken more note of how I got to the well Recovery Wizard. I hope that I never have to do it again!

  • Blue screen with error message

    Product name: HP Media Center M7250n desktop PC

    Product #ED842aa-aba

    I get a blue screen with error messages asking if this is the first time I get the error and then at the end it says: it is dumping memory. I would wipe my hard drive and reinstall XP but my system is out of warranty and HP gives me a recovery CD. What are my options.

    Hello

    If you are looking to purchase a set of recovery disc for your system, you can visit the site http://www.restoredisks.com/.

    NOTE: This site is not the HP website and it's a third-party site where they provide the recovery for different computer manufacturers disk (they charge for discs).

  • Satellite X 205-SLi3 - black screen with the mobile mouse at startup

    I have a computer laptop X 205 - Sli 3 satellite, which is a little more than a month and running windows Vista. (let me know if the exact specifications make a difference)

    Yesterday morning my laptop was working fine, I arrested him at home because I need to take to work with me to get some files there. However, when I tried to turn it back on all I got was a black screen with cursor mouse mobile white dead center. I saw other posts with similar problems, but no solutions.

    Loads everything up as normal at the beginning: I get the Toshiba load screen (this allows me to make changes to the boot from there with F2, F8, F12 or, but none seems to have no effect) and I get the little green loading bar of Microsoft just before the screen blinks a few times and then turns black except for the white mouse. The touchpad, Capslock and scroll lock keys * are * admissible, but the function keys and Ctrl + Alt + Delete to do * not * work. There is no way to stop the laptop at this point without maintaining the power button.

    I tried to start in safe mode, safe mode with networking, safe mode with command prompt, only to get exactly the same result after Windows loading bar. (only a lower resolution on this beautiful Virgin high-def screen mouse cursor). I activated the boot record, nothing, I tried to start with the "last known good configuration", nothing.

    I tried windows repair options: repair system, System Restore (it * was * a windows update just before restore point in my laptop screwed up and I m wondering if that has something to do with it because it was the first time the computer was turned off since the auto update installed... but get an older restore point does not help) , as well as the windows memory diagnostic tool. Everything is displayed normally but still black screen after the loading bar Microsoft...

    I also tried the debug mode, and directory services restore mode just for the heck of it - each time the black screen of death.

    I even put in the Toshiba recovery disc and put my laptop to boot from the CD rather than the HD (it gives me the same options by pressing F8 and go to repair are starting only I didn't have to put my admin password)

    The only thing I can think that I n t done is format my whole hard drive, I know that this is not always a solution, and I prefer to keep all my school and work files if possible. Fortunately I am able to get into the command prompt BACK and some of the most important things am copy on a USB key, but I'll still probably lose all my programs and larger files.

    Someone had a similar problem?
    If so, what was the solution?
    I would call all technical support, but I won't have time until after the new year to spend on the phone and I have a feeling that their solution will be to format and use the recovery disc.

    Man, such an expensive machine and then all this work of wouldn because of some software sh... So, if you have backed up your most important files, then, I would _recommend_ you to recover your machine. Won´t solve you anything just trying to find the error, believe me, you'll go nuts.

    Just put the recovery in the drive and start the process of "delete-all-my-programs-but-protect-my-nerves-and-make-everything-OK".

    Welcome them

  • Computer has a black screen with a message "power off, then reinstall the jumper in normal mode position."

    Original title: black screen?

    My computer has a black screen with: turn off power and reinstall the jumper in normal mode position? Help!

    Hi Miguel C.
     
    a. What is the brand of your computer?
     
    b. do you remember of any changes to your machine before the question?
     
    I don't know what motherboard you have, but some is shipped with the 'Clear CMOS' jumper in the position unequivocally. Check the manual of your motherboard for this rider and make sure that it is in the normal position.
     
    J7B1 computer configuration jumper block requires a single rider set the configuration of the BIOS Setup utility. This allows the configuration in the configuration utility BIOS, including the frequency of bus and the processor motherboard speed.
     
    Note: Do not move this jumper with the computer turned on.

    Warning of the BIOS:
    BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
     
    I think, you'd be best to contact the manufacturer of the motherboard as this seems to be a motherboard problem.
     
    Aziz Nadeem - Microsoft Support
     

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • Satellite L350 - D 215 black screen with blinking cursor

    Satellite L350-D 215 black with cursor flashing screen - it worked fine said he had to restart and that's what happened, I can't in windows allows any single me in bios and Boot Manager.

    I am looking for help to solve this problem. I don't know what went wrong, my warranty runs out on December 26, 2010 so if I can't fix it myself can I have return to toshiba to fix. I'm at a loss as to how to solve this problem, I have no disk for laptop recovery.

    I tried the fix when you remove the battery and press the power button to 30 seconds doesn't not work, also tried leaving a few hours without battery and tried plugging in to power same, toshiba screen and only boot in the bios etc usually let HDD boot in windows only in black screen and blinking cursor.

    Any help much appreciated. I saw the restoration of disks for £9.95 on a Web site for the machine so don't know what to do... totally empty.

    Hello

    I agree with Akuma.
    Blinking cursor means that the Windows OS can not be loaded / booted up.
    You need to reinstall new OS.

    If you have a Microsoft windows CD you can use this disk to reinstall the operating system. The necessary drivers can be downloaded from the Toshiba page.
    Otherwise, you would need order a recovery disc Toshiba from here:
    https://backupmedia.Toshiba.EU/landing.aspx

    Welcome them

  • Satellite A500 - 18 X - blue screen with error jmcr.sys

    Hi all

    I have the Toshiba Satellite A500 - 18 X. I get several errors with a blue screen that is associated with a file called jmcr.sys, I used the recovery process, but the problem persists.

    Can someone tell me what could be the problem? Is it a virus, a hardware malfunction or some drivers not up-to-date?

    Thank you

    Hello

    If you have already used the recovery disk Toshiba it appears to be a malfunction of the equipment. I don't see a reason for a software problem, because the Toshiba Recovery disk restore factory settings and these settings are pre-tested by Toshiba

    So most blue screens are related to defective RAM modules. You can test them using Memtest86. It is a diagnostic tool where you can download an iso image for creating a startup disk.

    Check this box!

  • Satellite L40 - 14 H - black screen after BIOS update

    Hello!

    I have laptop Satellite L40 - 14 H (PSL48E). I installed Windows XP, it worked fine, except the keypad is lit permanently so I couldn't enter a few symbols. I decided to install the special BIOS for WinXP, which downloaded from the Toshiba web site. The PSL48x model is in the support list. Change the windows flashing and reboot, I entered the BIOS to see what has changed. I saw nothing new, so I leave the WOOD and restart again.

    Since then, turns on the phone, but the screen is not, it is black :-(((
    Please help me, how can I save to live?
    Thank you, Eugene.

    Tried to connect it to an external monitor?
    If this does not help, you will need to go to a SPA to take a look at your machine.

  • U2515H, black screen with error during startup until the Windows login screen

    It is a half frustrating work situation.

    Was doing this:

    display port HDMI card--> cable HDMI - HDMI--> HDMI U2515H port

    This configuration has worked in Windows 7, with a 2560 x 1440 resolution reached.

    However, when you perform a reboot of the machine, the screen went black and impossible to display the BIOS POST screen (these text showing the amount of RAM you have, what are the HD detected, etc.). In addition, there was an error message on screen, saying:

    "The current moment of entry is not supported by the display. Please change your timing of entry to 2560 x 1440, 60 Hz or any other listed monitor calendar according to the characteristics of the monitor"

    The message error and white screen persists until Windows loaded to the login screen. This means that I can't see even the Windows logo, or the safe mode selection screen if I press F8.

    It's so no way for me to go into the BIOS to change any parameter, or do a boot was secure.

    Tried to use a DVI-HDMI converter and also a DVI-HDMI cable to make use of the DVI port of my video card. Still the same error as above. Worse still, this implementation does not work in Windows 7, gives me a white screen.

    I'm sure the DVI port on my video card works, cos it can work with my old Samsung monitor. Inspired by the present, the steps to be followed to the letter, may force the U2515H to show the BIOS screen:

    1. stop down and power down the computer.

    2 port DVI video card-->--> old Samsung monitor DVI port DVI - DVI cable

    3. turn on your computer. The screen of the MESSAGE on the Samsung monitor.

    4. go into the BIOS by pressing del screen

    5 disconnect the cable DVI - DVI video card DVI port.

    6 port card video--> cable DVI DVI - HDMI--> HDMI U2515H port

    The thing is, if I have to keep the old monitor, why bother to buy the new U2515H from Dell?

    So, how can I get the U2515H to accept the signal from my video card during the POST screen and the start-up phase, without going through the tedious steps each time? Thanks in advance!

    Material:

    motherboard: Asus P5K - E Wifi (latest version of the BIOS)

    video card: Galaxy 8800GT (DVI, HDMI)

    It seems that your motherboard ASUS has a slot PCIe x 16 blue. If one of the beaches mid PCIe x 16 graphics cards will suffice. Go here. I have this sort by Nvidia PCIe x 16 2.0 video cards, low to high price. You look for one with DP or CDM. Or simply go to a local store and search the PCIe x 16 video cards with DP or CDM.

  • Try to install Windows Vista. When the system starts, I get a black screen with no message and no prompt.

    before starting up the plant, black screen

    A friend gave me the laptop since they bought a new.  I tried to do a clean install of Windows Vista on a laptop Gateway P6831 FX.  After changing the boot order in the bios settings, the dvd starts to spin.  The only thing that appears on the screen is a screen black/Bank.  I'm never invited with the message 'Press any key to start the installation' to start copying the files for vista.

    The Bios recognizes the hard drive (Sata).  I don't know what to do at this point.  Help, please.

    I fixed it.  I looked at a few other responses in this forum and used the SATA drivers during the installation of Windows XP.  After that, I've upgraded to Vista.

  • Bluetooth, causing the blue screen with error message: out of State driver

    Hello

    I am posting this in the other thread here but it was closed before I could solve the problem.
    Background:
    I left on vacation for 4 weeks and I left my computer.  When I came back, my computer was giving me the following problems:
    • Video playback of my SIN was rough and freezing - I fixed that by finding out one of the drives died on RAID-1
    • After 30 minutes, the computer would give me a Blue Screen of Death (BSOD) and reboot - I have updated every driver I could, each piece of software, update the BIOS and then finally solved the problem by updating the firmware on my boot drive: a Crucial 128 GB SSD m4

    These two problems have been resolved, but can be useful to understand the current problem

    Current problem:
    After trying to use the webcam for video chat via Gtalk or Skype, my Bluetooth Logitech MX5500 keyboard and mouse stop responding.  About 10-15 minutes after the call is completed, my computer gives a Blue Screen of Death with the message of STATE FAILURE of PILOT.
    The minidump file is available here, and I understand that the cause is due to my Bluetooth driver: http://dl.dropbox.com/u/30633232/052212-24429-01.dmp
    What I tried:
    • I've updated all the drivers available on the Asus site for my motherboard Asus P8P67 EVO, including Bluetooth and the BIOS driver
    • I've updated my HD Audio integrated system with the drivers available on the Web from Realtek site
    • I've updated all my drivers webcam and Logitech software
    • I uninstalled, restart and reinstalled my Bluetooth drivers
    • I have not matched and repaired my Logitech MX5500 keyboard and mouse
    • I uninstalled, restart and reinstalled both Skype and Gtalk for Chrome, Firefox and Internet Explorer plugin
    The ask:
    I'm out of ideas... would like to get the genius of someone on these boards help me please!

    The problem may be with the c:\windows\system32\drivers\sptd.sys:

    ******************************************************************************
    *                                                                             *
    * Bugcheck analysis *.
    *                                                                             *
    *******************************************************************************

    DRIVER_POWER_STATE_FAILURE (9f)
    A driver is causing an inconsistent power state.
    Arguments:
    Arg1: 0000000000000003, a device object has been blocking an Irp for too long
    Arg2: fffffa8009d73060, physical device from the stack object
    Arg3: fffff80004c093d8, functional device object of the stack
    Arg4: fffffa800e0c3190, blocked IRP

    Debugging information:
    ------------------

    DRVPOWERSTATE_SUBCODE: 3

    Nom_image: usbhub.sys

    DEBUG_FLR_IMAGE_TIMESTAMP: 4d8c0c15

    MODULE_NAME: usbhub

    FAULTING_MODULE: fffff88008c06000 usbhub

    CUSTOMER_CRASH_COUNT: 1

    DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

    BUGCHECK_STR: 0X9F

    Nom_processus: System

    CURRENT_IRQL: 2

    STACK_TEXT:
    "fffff800'04 c 09388 fffff800'03502702: 00000000' 00000000'00000003 fffffa80 ' 09 0000009f d 73060 fffff800 ' 04c093d8: nt! KeBugCheckEx
    "fffff800 ' 04 c 09390 fffff800 ' 034a2e4c: fffff800 '04c094c0 fffff800' 04c094c0 00000000'00000000 00000000'00000003: nt! : FNODOBFM: 'chain' + 0 x 34050
    "fffff800 ' 04 c 09430 fffff800 ' 034a2ce6: fffffa80 '06cdf5b0 00000000'01642618 00000000'00000000 fffffa80' 097aa901: nt! KiProcessTimerDpcTable + 0x6c

    fffff800 '04c094a0 fffff800' 034a2bce: 0000034f 'c591e29e fffff800' 04c09b18 00000000'01642618 fffff800'0360 d 588: nt! KiProcessExpiredTimerList + 0xc6
    "fffff800 '04c09af0 fffff800' 034a29b7: 0000011a ' 68920ac3 ' 01642618 0000011 0000011a has ' 68920 has 32 00000000'00000018: nt! KiTimerExpiration + 0x1be
    fffff800 '04c09b90 fffff800' 0348feca: fffff800 '0360ae80 fffff800' 03618cc0 00000000'00000002 fffff880' 00000000: nt! KiRetireDpcList + 0 x 277
    fffff800'04c09c40 00000000' 00000000: fffff800 ' 04c0a000 fffff800'04 c 04000 fffff800 ' 04c09c00 00000000' 00000000: nt! KiIdleLoop + 0x5a

    STACK_COMMAND: kb

    FOLLOWUP_NAME: MachineOwner

    FAILURE_BUCKET_ID: X64_0x9F_3_btfilter_IMAGE_usbhub.sys

    BUCKET_ID: X64_0x9F_3_btfilter_IMAGE_usbhub.sys

    Follow-up: MachineOwner
    ---------

    0: kd >! devobj fffffa8009d73060
    Object Device (fffffa8009d73060) is:
    Can not read information from nt shift! ObpInfoMaskToOffset
    \Driver\usbhub DriverObject fffffa80094ffa50
    Current PRI 00000000 RefCount 2 Type 00000022 Flags 00003040
    DevExt fffffa8009d731b0 DevObjExt fffffa8009d73bb0 DevNode fffffa8009d7b550
    ExtensionFlags (0 x 00000800)
    Unknown flags 0 x 00000800
    AttachedDevice (top) fffffa8009663880 * WARNING: unable to verify timestamp for c:\windows\system32\drivers\sptd.sys
    ERROR: Module load completed but symbols can be loaded for c:\windows\system32\drivers\sptd.sys
    \Driver\ACPI
    Queue is not busy.

    I would say to uninstall the application that has installed the driver c:\windows\system32\drivers\sptd.sys, maybe it is Daemon Tools or Alcohol 120%.

    Then, uninstall the c:\windows\system32\drivers\sptd.sys - see "How can I remove driver SPTD on 64-bit operating system?" in the following link:

    http://www.duplexsecure.com/en/FAQ

    Similar question in the following thread:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/the-computer-has-rebooted-from-a-bugcheck-the/2a0b354e-4FEA-4349-b88f-eb4b10199380

Maybe you are looking for

  • ACPI\VEN_HPQ & DEV_0004 - Driver for Windows 8.1

    Please you helpen bij het vinden van driver voor: ACPI-VEN_HPQ & DEV_0004ACPI-HPQ0004* HPQ0004 HP Pavilion dv6-6b50ed Entertainment NotebookSerienummer: [edited by Moderator serial number]Productnummer: QG795EAWindows 8.1 - 64 - бит

  • Drivers Compaq Presario v3250au windows xp

    Hello I need Windows XP drivers for my Compaq Presario V3250AU laptop. The serial number is [thank you for visiting the Forums from HP Support. I'm sorry to inform you that your message needs some changes to remove personal information].. Thanks in a

  • some contacts do not come to the top trying to transmit to...

    IM currently having a problem with my contacts.  most of the time when I start to type in a contact or a number in the TO: line my contacts will come and I can choose who I want to.   but for some reason any other not at all even when I type his name

  • Installing the printer HP Laserjet 4050 Series PCL6 on Windows 8 Pro

    I tried to install HP 4050 LaserJet PCL6 printer on my laptop with Windows 8 pro 32-bit o/s. I have used the USB IEEE 1284 printer cable to connect the printer and the laptop, but not worked. Any help people? Thanks in advance. Sheikh Mustapha.

  • COMException (E_FAIL) to access the contents of the library of WinRT apps

    I get a COM (E_FAIL) exception when I run this code base WinRT c# under my Windows user account: TextBlock.Text = KnownFolders.PicturesLibrary.DisplayName; This line works OK IReadOnlyList fileList = waiting for KnownFolders.PicturesLibrary.GetFilesA