Satellite L40 - 17Q - Windows XP says that there is no HARD drive
Hello
I want to install XP, but it is said that there is no HARD drive. Already tried nLite, but no result. I have Satellite L40 - 17Q and I'm under Win. 7.
What can I do?
Thank you
Hey,.
What SATA driver you have integrated with nLite? If Windows XP cannot always find a disk of t means that you used the wrong driver. The correct driver can be downloaded from the official website of Toshiba and you need the Intel Storage Manager.
http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers
If you have downloaded the correct driver, follow the instructions here and make sure that your version of XP SP3:
http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm
Tags: Toshiba
Similar Questions
-
Satellite L40: How can I recover the files from the hard drive
Hello
Can someone help me please. About a week ago I started to have a clicking sound coming from my laptop Satellite L40. My laptop froze and when I restarted, I was directed to the system configuration with a message at the bottom saying
"Pri Master Hard Disk Drive SMART status bad, Backup and replace."
Press F2 to assume. »I pressed F2, but I don't have any idea what to do?
Can someone tell me how do I backup my files until my HDD disappeared completely or if it was can I use another device to get down them.
I tried using the recovery disk, but the disk does not respond?
Help, please
Pete
Hello
This message looks like a warning of S.M.A.R.T. notification
This means that your HARD disk will eventually fail.
It can happen in the next few days or it can't happen for a few months but the SMART feature has detected that the drive is wrong then it should be replaced as soon as possible.
It seems that your laptop is not very old, so the warranty should cover all replacements.I see only one way to access and back up the data. Eventually, you could buy an external enclosure SATA USB HARD drive and was able to connect the HARD drive to another computer.
I don't know if you will be able to access the HARD drive because of the failure, but if you want you can try this m.Good luck
-
Upgrade to Windows 10 after that I got my hard drive replaced
Hello
I have a Dell Inspiron 15R running Windows 10 I received through the upgrade process.
Recently, he has developed some hard drive problems I went and got the hard drive changed but had to install windows 8 because it is the operating system it came with. So I very well, I'll go through the whole process again no problem.
I spent a few hours trying to raise all the updates and then realized that there was none, so I downloaded the Windows 10 Upgrade Wizard and tried to go through but it gave me an error for "Operating system". It says "You need to activate Windows before upgrading".
He said windows is activated but Activation details displays a 0xC004C003 error code. I looked at this community solutions to this and tried the phone activation process, but it says I could be victim of piracy of software through automated Messaging. Who has no sense because I was running the same copy before with my Microsoft ID and all.
Why he thinks that the software can be hacked?
What should I do now? It is ridiculous to force me to buy a new key. Why should I pay again for something I already own.
If I've been duped by the store, I got my replaced hard drive so how can I restore my windows with my own key?
Help, please!
Thank you
[A moderator has left your forum thread Win8 specific update to the assets of Win8 (etc) - specific forum for us.]
I figured out how to get my key from the BIOS.
Have you tried to activate (for example by telephone) with that key? -Online http://www.eightforums.com/tutorials/24636-activate-windows-8-phone.html
Here again, this page shows the 0xC004C003 error code means you will need to contact a Microsoft customer service representative. YMMV
How can I clean install windows without a disk?
For Windows 8 (.1), see http://windows.microsoft.com/en-us/windows-8/create-reset-refresh-media
If you want to upgrade to Win10, there is a way to do it, too - but I think you would be better to remove your current installation of Win8 & running (i.e. activated & fully-patched - including get Windows installed 8.1) before worrying about the upgrade to Win10.
PS: The guy 'at the store' caused these hassles. Maybe you should contact the store & gripe?
-
Recently, I restored my computer to the original because of problems of State I've met
Hello
1. this happens with some particular CD?
2 did you recent hardware or software changes to your computer before this problem?
3. are you able to view the contents of the CD in windows explore?Try running the fix of the article below and check out them.
Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-usSee also the articles that might help you.
Rip music: frequently asked questions
http://Windows.Microsoft.com/en-NZ/Windows7/rip-music-frequently-asked-questions
Change settings for ripping
http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-ripping-musicSimilar questions:
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-sound/CD-wont-RIP-using-Windows-Media-Player-in-Windows/96afeb65-4A6D-4559-AF83-c9b52e42a938
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/why-wont-my-Windows-Media-Player-RIP-any-CDs/bc5b21d1-9fa9-48F9-a84a-eb439997ea79 -
Satellite L40 - 18W - USB ports does not work after format HARD drive
I formatted my laptop "L40 - 18w" after that all usb ports do not work.
Could you please help me on this issue
Thank you
Ben is right. After the installation of the operating system as a first step, you need to install driver chipset.
Please see the download page for Toshiba under http://eu.computers.toshiba-europe.com
There you can find all the drivers for your model of laptop including driver chipset. -
I inserted a disc in the drive and it does not recognize the drive and the disc, so I tried to eject, but I can't. So far nothing online seems to have helped. What should I do?
Hello
For the readers of the status bar:
Sometimes they get stuck. There is a small hole on the front of the CD drive that you can stick a
a paper clip that will release him and the reader to open.Create a trombone in car Opener
http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htmOpen a CD/DVD player with a paper clip.
http://www.josepino.com/?open_cd-dvd_paperclip=================================
For the readers of the slot:
Check with the manufacturer of system on how do to eject the disc.
Dell xps m1330 dvd drive will not eject cd inside<-- check="" these="">-->
http://www.FixYa.com/support/t2643828-dell_xps_m1330_dvd_drive_will_not_ejectBe careful as you may damage the player using the method below:
You may need to get the driver to work 1 However, this could still work.
http://www.tech-tweak.NET/2009/11/how-to-eject-STUK-DVD-from-slot-load.htmlThe method used on the Mac could work
http://www.YouTube.com/watch?v=wpWieIoBBrkHow to disassemble the laptop (Dell XPS M1330)<--- voids="" any="" warranty!="" this="" is="" an="">--->
http://ahwee.com/how-to-disassemble-laptop-Dell-XPS-M1330Also have heard double tape on a credit card or play can work.
=======================================================
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
-
I had a good laptop running until I have run a "critical" update Now its locked in a cycle of repetition. If I try to start in safe mode it always goes back to the Update step 3 of 3 @ 84 percent. Vista came pre-installed, and I have no recovery disk. Now what?
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
I removed the battery and unplugged the laptop for a few hours the fact a restoration of f8 at the State of the plant. It seems to have worked. Now, let's see if she still wants to install service pack 3!
Thanks for the help.
-
Try to use the recovery disk to restore a Pavilion notebook but without success.
I want to look for disk hard manufacturing information. I followed the steps described in the support menu, but a message shows that there is no hard drive (or no operating system) in the computer when the system reboots (whether HARD drive or recovery CD.)
Please advise,
1. how to recover manufacturing HD news and/or the opportunity to buy a new HD from HP for replacement.
2. How do I order a recovery CD or USB by HP.
Thank you.If you can read the Microsoft Windows 7 of 25-character license key, you can download a Windows 7 ISO file to burn to a DVD or USB flash drive. The version must match that's installed on your PC as shown on the sticker COST Microsoft fixed on the bottom of the laptop. Like Windows Home Premium.
Links to downloads of Windows 7 ISO files: -
Windows Update says that I have updates ready to install but there is nothing there
Windows Update says that I have updates ready to install, but there is nothing there. It shows the latest updates could not be installed, but I can't pull it up in the history either. It seems frozen.
* original title - Windows Update says that I have updates ready to install, but there is nothing there. It shows the latest updates could not be installed, but I can't pull it up in the history either. Seems frozen.*
Hi HelpMe1945,
Thanks for the update. We recommend that you download and run Microsoft fix and then install updates.
See code error '0 x 80070646', '646', or '1606' when you try to install the Office updatesVery important: Modifying the registry incorrectly will cause serious damage to the computer. Back up the registry until you make changes.
See how to backup the registryVisit our Microsoft answers feedback Forum and let us know what you think.
-
Window Media Center will not configure my Xbox says that there is an error in moan by train
Window Media Center will not configure my Xbox says that there is an error in moan by train
Hello
What is you get the exact error message?
Please follow the steps mentioned in the links below.
Set up a Windows Media Center Extender device
http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Windows-Media-Center-Extender-device
You tried to set up your console Xbox 360 as a Media Center Extender, but the installer is not started
http://support.Microsoft.com/kb/916180
http://support.Xbox.com/en-us/Xbox-360/audio-video-Setup-and-use/Windows-Media-Center
http://support.Xbox.com/en-us/Xbox-360/audio-video-Setup-and-use/Media-Center-FAQ
-
* Original title: hard drive
I have a lenovo laptop, processor Intel i3, 500 GB hard drive. After the clean install of windows 7, it gives an error saying that there is a problem in the hard drive. I ran chkdsk looking for bad sector and its display 6000 KB in bad sectors. After completing the audit when it began to restart its stuck when the windows logo appears. What should I do? Reinstall the windows help?
Run the hard drive HD diagnosis extended CD scan manufacturer to know with certainty the State of the reader. If your brand has no bootable diagnostics in the link, use Seagate Seatools burned onto CD or SeaTools for a USB key . Follow this with a full check disk command from the installation media kicked prompt know with absolute certainty the State of the reader. If he repeated the errors after you run the two tests twice, I replace it or at least keep everything backed up in real time.
If by chance the drive past diagnosis then compares the steps you've done with the best possible Clean install Windows 10 in the link, you can do more if it varied too - especially if the partitions were not deleted during install. If you do then I additonally run own Diskpart command command line of the punt media accessible to the first screen after startup by pressing SHIFT + F10 keys, or through the repair your computer on the second screen.
-
I just bought a new laptop with Windows 8 is installed. When I try to install my printer, I get an error saying that there is no driver. Where can I download a driver for this printer and the OS from?
Also, where can I find a list of compatible printers?
I just bought a new laptop with Windows 8 is installed. When I try to install my printer, I get an error saying that there is no driver. Where can I download a driver for this printer and the OS from?
Also, where can I find a list of compatible printers?
Hello
You can use the Windows 8 Compatibility Center to find out if a device is compatible.
Windows Compatibility Center: find updates, drivers, & downloads for Windows 8, Windows RT:
http://www.Microsoft.com/en-us/Windows/compatibility/WinRT/CompatCenter/homeFAQ - Windows Compatibility Center:
http://www.Microsoft.com/en-us/Windows/compatibility/WIN8/CompatCenter/FAQ
Concerning
-
Cannot install the FSX SDK says that there is no such thing as the E: drive.
Original title: games
I try to install the FSX SDK on a second computer. He settled not and says that there is no such thing as the E: drive. There is no windows popping up for me so that it points in the right direction. It will also not be installed the full Simulator for the same reason. What, besides to create a new partition on hard drive, I do?
Hi Todd Moore,
· What version of the operating system is installed on the computer?
· You get the error message?
· Did you do changes on the computer before the show?
· He has already worked?
Follow these methods.
Method 1: Try to install the game as administrator.
How to apply once with a full administrator access token?
Method 2: Temporarily disable the security software .
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
Method 3: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.
Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.
Method 4: Follow the steps in the article.
Error message when you install a Microsoft game or a mapping program
Microsoft games: InstallShield Error Messages
For reference:
Solve problems with activation for Microsoft games problems and mapping programs
-
I have a ts 2008 license server with 90 per available user licenses (21 already issed). However, users get a message that says that there are no available licenses. The TS are iss device by installing licenses. Local group policy is not configured on each ts. The strange thing is that I can't find the option to license type within the domain group strategy, however, I suspect that this is the problem as when I go through the configuration in the RD Licensing Manager system indicates that the license server will be able to issue per user Cal. If anyone has had / overcome this problem I would be very gratefull to know the solution. Best regards Steve
Please repost your request in one of the most appropriate Microsoft Windows Server Forums, thank you!
-
I had to completely restore my computer with a F10 restore now it wont let me not put my software on without XP Service Pack 2 when I try to load SP2 it says that there is a cryptographic error
Any ideas?
See...
Cleaning a compromised system
http://TechNet.Microsoft.com/en-us/library/cc700813.aspxFollow the instructions in this post of mine in another forum (to-the-letter & in order!) to restore your computer to a State course: http://aumha.net/viewtopic.php?f=62&t=44636
If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/xprepair/threads
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
Maybe you are looking for
-
Hello Does anyone know how upgrade you the memory in one of these 2 GB. There seems to be not only one configurable slot and the standard is 512?, is there a module 1.5 MB available? Dextercat
-
Windows 7 Home Premium update problems
Dears Helpers About 6 months ago I bought a Samsung series 7 times. It came with windows 7 Home Premium. When I bought the laptop, the seller told me that Windows has come with the ability to reformat itself in windows 7 again. The time has come to
-
C++ opengl are 2.0 eglGetDisplay fails
Hello I'm porting a C + c++ / OpenGl ES 2.0 game to the current API of the Playbook. My problem is that, inside bbutil_init_egl, eglGetDisplay is EGL_NO_DISPLAY without defining any error: int main(int argc, char *argv[]) { screen_context_t screen_c
-
BlackBerry Smartphones MidpSSH or bbSSH torch
I manage a number of * nix machines and use Ubuntu on my main desktop (still don't know why will not support RIM * nix). I had the 8700, twice, then a 9000 "BOLD" before getting my torch yesterday. I use MidpSSH for 3 years and love him to manage t
-
Customization of keyboard shortcuts disables other strikes!
I have long been a big fan of customize my keyboard shortcuts. In general, I'll change the behavior of F of my keyboard keys in the system prefs to turn them over to 'standard keys. This then releases lots of F keys as a convenient "one-hit" shortcut