Satellite L40 - 18W PSL4CE: power supply Question

Similar Questions

• Satellite L40 - 18W PSL4CE - while charging the Touchpad doesn't work does not correctly

  Hi all..

  I'm on Toshiba Satellite L40-18W-PSL4CE model 00H0000GAR...
  Recently, my adapter went cause of overvoltage... so I changed the new adapter after changing the new adapter...
  My touchpad does not work correctly...
  That is to say... If I work with baterry the touchpad works very well... If I connect to the AC adapter the touchpad works not properly but the external pout works well.

  Please help me...
  Thanks in advance...

  > Recently my adapter went cause of overvoltage... so I changed the new adapter after changing the new adapter my touchpad is not working properly...

  Using the power adapter Toshiba original and recommended?
  In my opinion, the issues could be linked to the new Ac adapter and may happens with an adapter not entirely comatibel AC

• Satellite L40 - 18W (PSL4CE) - need to press the button ON / OFF utility

  I would like to install the driver "TOUCH PAD (ON / OFF)" UTILITY ".
  for TOSHIBA SATELLITE L40 - 18W
  MODEL: PSL4CE

  Please help where to install this driver and how to operate the function Fn + F9

  concerning

  Everything about Windows XP Home edition, drivers, tools and install the utility, you can find HERE.

  I n t have this model of laptop and can't test the functionality of FN + F9.
  If you have installed the driver for the touchpad right and FN + F9 does not work, you can disable touchpad in the mouse properties.

• Satellite L40 - 18W does not work

  Hi all

  I bought before Toshiba Satellite L40 - 18W notebook 4 months ago, it was working fine until yesterday.
  but when I turned on my Lap Top today is not shwoing something in the screen.only the power button and battary
  LED is on, I have tried troubleshooting possible but no result at all.

  Can someone help me?

  Hello

  You can try the FF steps to isolate the problem:

  (1) unplug the adapter from the network

  (2) removing the battery

  3) try the laptop with just the AC adapter power.

  If the same problem occur then its your call, you can call technical support so that they can give you options for repair, another option is you can also locate the repair center nearest toshiba, you can just go to this site to see if you have one in your area--> [ASP Locator | http://pcrepair.toshiba.com]

  Post edited by: iSkO

• LAN and WLan doesn't work on Satellite L40 - 18W

  Hi all

  I have TOSHIBA Satellite L40 - 18W and my 1 - wireless problem not knitting & wired lan does not work.
  I download driver and everything is ok, but it doesn't work (when I search by wireless I can't find any network.) My router works fine)

  Please help me

  Hello

  It is difficult to understand what you mean by not working do not.
  Does that mean exactly?
  You are not able to connect to the internet or what?

  Usually, if the wireless network card and LAN card have been properly recognized in Device Manager, then the drivers are working properly and the problem could be related to the router configuration bad or maybe some active firewall, etc.

  First I recommend that you check the router settings. Check if the router has been configured with the right data from ISP and if all other options have been properly set.

  The laptop supports the Realtek Wlan and LAN card.
  Check if the wireless card uses the same standard WLan as the WLan router and if the right encryption has been used too.

• Satellite L40 - 18W - Touchpad does not work

  Hey guys...

  I have Toshiba Satellite L40 - 18W, bought in the Middle East, and unfortunately its touchpad does not work... I checked and double checked all the possible places, so anything that is disabled or misconfigured but found nothing.

  As there are quite a few errors in the operating system I formatted my hard drive and install WXP Prof, installed all the drivers, but the touchpad is not always works. I'm very confused as before and after formatting the pointer moves a little when I use the touch pad at the beginning of the UPA start? ¦

  Help, please...

  The best audit is to install the operating system with the original Toshiba recovery image and test it with the factory settings. In this case touchpad should work fine. Otherwise, contact the service and leave check your laptop.

  Sorry, but I don't see another solution for you.

• HP ENVY PHOENIX CTO 810-135QE - 600 watts power supply Question

  In the near future, I would like to upgrade the video card in my desktop HP ENVY PHOENIX CTO 135QE-810 GT 640 default to something a little more powerful and I was wondering if there is any details about the default 600 watts power that will help me in my decision to the next video card.

  I know that some video cards require a number of amps on the 12 volt rail and all the information that I have found previously on the power of 600 watts power supply in the computer is not in that kind of detail.

  What I read, the power is a Petrus 600W e-star 5.0 Bronze, HP Part number 633186-002.

  Any additional details and details on this power to help me determine the next video card would be useful.

  On a side note the video card, I'm currently doing is one of the next Nvidia GTX 750 TI models, thoughts and recommendations on this specific map?

  Thank you

  JCOOPER2

  Hello

  Your PC has UEFI bios, so most video cards should work.  Some video cards will work in UEFI mode and others in legacy mode, that your PC is able to run.

  When the manufacturer of the video card and/or AMD or NVIDIA specify a minimum power supply size then it is best to stick to this recommendation.  Not all power supplies are built to the same standards of quality.  In addition the internal components, temperature, charges unknown and time that the PC will be placed under the maximum load are taken into account at the recommendation of minimum power supply is indicated.

  I have not seen a power of 500 watts with 12v rating of 18A, but this does not mean that there is not. And if that's the case, then the total power rating is suspect. A video card that requires an external auxiliary power connector will also draw power from the PCI-E slot.

  Are there cases where the minimum size of the power supply is insufficient? Yes, those who might be extreme but someone can have connected to power different connectors either to avoid buying a new power supply or maybe around just the food manufacturer minimum power rating. Some may do it thinking 'I'm going on fox the Fox ". It can work, but maybe the questions later start occurred.  I prefer to get the job done right the first time. You don't need a power supply to perhaps of overload and short circuit then internally causing spikes to the components in the PC.

• Satellite U500 - 11 C - power supply unit not detected

  Hello

  on my Satellite U500 - 11 C, the power supply is no longer recognizes (the rest green LED turns off when I plug)

  I tested my diet and it's OK

  I disassemble my laptop to check the connector and the power is OK of the external connector to the connector on the motherboard.

  with my battery, the computer works normally (but the battery is not more)

  You have an idea on how to solve this problem?
  What can I check?

  > Do you have an idea on how to fix this?
  If the battery and the mains adapter are ok, while a single problem can cause this: faulty motherboard.
  Maybe there is something wrong with the electronic power supply on the motherboard.

  Of course this is only my personal opinion, but I put t see any other reason for that

• UCS C200 Server Power Supply Question

  We make some changes in our data center and which involves electric grid.  We had to replace our Dustribution of power rack and to respond to the charge, we moved 208V, 3 phase power distribution.  Read the literature, I see that the power supply to the UCS C200 servers can operate 115V to 230V AC.

  My questions are: is it everything I have on power supply from 120V AC 208 v power supply power supply power supply?  Can I have a power running at 120 v and the other operating at 208V?  I try to avoid the closure of the server.

  According to specifications

  http://www.Cisco.com/c/dam/en/us/products/collateral/servers-unified-com...

  Table 41 UCS C220 M3 SFF 450w Power Supply Specificationspescription
  Input AC voltage
  90 to 264 VAC auto-ranging,
  100 to 120 VAC nominal
  200 to 240 VAC nominal

• Reference Dell GX620 Power Supply Question

  What's up guys, I'm new here, and earlier this month my school made me a job on time partial like the public library IT Assistant, because I took IT out classes at my high school. I'm 18, and I know a little about computers. My question is, one of our computers at the library, a GX620, the power supply of the machine went wrong and that we have at the back of the library are detached power supplies for GX520, I asked my professor of computer SCIENCE at the school if it would be prudent to go and try to install the GX520 power in the GX620, but I'm still not sure if it will be a sure idea It would cause a fire? He would burn something inside the PC? My COMPUTER teacher told me to check the amps and volts on feeding 620, and I checked, the GX620 power supply has a maximum of 275 WATTS, while feeding GX520 has a maximum of 220 WATTS, is completely switch the GX620 bad diet, with the GX520 spare?

  And you know that the PSU is bad, how... ?

  First, you will need to know if the spare GX520 PSU's for the same (Tower, Desktop, small, ultra compact) form factor as the GX620 before you can even think to use it because if the form factor of the PC is different, it cannot even between.

  There is a block of POWER W 220 here that says: it adapts GX520 both GX620 Desktop. But if you do not have a GX620 Desktop, this power supply may be a bit low power if the original was 275W.

  That said, you can get a power supply for the GX620 here for less than $30, depending on the form factor. If your existing GX620 power SUPPLY PSU 275W, it seems you might have a small GX620 form, based on the specs of the PSU indicated on this page.

  BTW: Please delete the telephone number of your post. This is a violation of the terms of the forum to use to post personal information, not to mention that it is never a good idea to post personal information in any open forum.

  EDIT: The forum dislikes the second hyper link is here:

  [16] http://www.discountelectronics.com/category?Product_Model=3&category=2&PRODUCT_TYPE = 16

• Portable computer L500 satellite starts only with power supply

  Hi Please help me
  I brought my laptop say there are 3 or more weeks... I'm working on the battery and power, but just now I can only run in power.

  Its like the battery does not exsist. It indicates that the battery is charged to 100% but the computer does not light with the power of the battery...

  Any suggestions would be highly popular...

  -d-

  When the operating system is loaded is recognized correctly battery?

  In any case, this behavior is not normal and maybe you should contact the nearest Toshiba service provider and ask for help. They can check the battery and the power supply electronic and see what's wrong here. The warranty is valid if new battery or repair will be free.

• Satellite L40 - 18W - USB ports does not work after format HARD drive

  I formatted my laptop "L40 - 18w" after that all usb ports do not work.

  Could you please help me on this issue

  Thank you

  Ben is right. After the installation of the operating system as a first step, you need to install driver chipset.
  Please see the download page for Toshiba under http://eu.computers.toshiba-europe.com
  There you can find all the drivers for your model of laptop including driver chipset.

• Can power supply Question - I use the 230W power supply with a W540?

  I have a W540, which currently uses a power 170W (8.5 a 20V)

  I got also a docking station for a P50 that has a power of 230W showing 20V 11. 5a.

  The connectors are similar, but I'm hesitant to try the 230W power supply in the W540.

  It is allowed to use the 230W power supply with the W540?

  230 watts is maximum power feeding, it only provides the energy required by the computer.

  I sold my W540, so I can't test it for you. But I do use the ThinkPad X 1 carbon with 230 watts without no problem power adapter.

• HP envy Phoenix: power supply question

  fact the hp envy Phoenix 810-430qe motherboard use standandard atx power supply connectors or connectors owners that I was told that it can use up to 900w but need to know for sure

  egaregolden12 wrote:

  fact the hp envy Phoenix 810-430qe motherboard use standandard atx power supply connectors or connectors owners that I was told that it can use up to 900w but need to know for sure

  Yes, it's a standard ATX PSU.  The description of the part for your current installed PSU is as follows: (746177-001) power supply - ATX, Picolit, IPS, 500W, EStar Bronze

• Power supply question - amber LED flashing - Dimension E520

  So, I'm working on the dust removal and re - install windows on a machine. I've done dusting, but now I have problems with a LED flashes orange. The system will not top all - fuel without fans or beeps.

  After looking through some posts for ideas, I think it is a bad power supply or a problem with the heat sink.

  I think power because this seems to be a common problem. How can I test the existing? Is there a way to fire unless it is connected to the motherboard?

  The reason why I am wary of the heatsink is that I removed it when I was doing the dusting. I had the intention of fire tonight and get a new thermal paste in the coming days. Since then, I have read that this could be a recipe for frying the total CPU and I wonder if the machine is not pulled up like a check for free preservation any.

  It detects if I removed the heatsink? If it's happening, it will automatically detect when the new thermal paste is in there? Or is there a reset procedure any?

  Any help would be great. Thank you!

  As a side note, the design of this box is poor. I can't find some way to dust effectively the heatsink without removing it from the central unit. Supply openings do not match, so you cannot blow a good flow of air through the box.

  chelseasounder

  A flashing orange switch LED means that the computer is under voltage, but a power problem internal may exist.

  This may indicate a bad diet

  Are the Diagnostic LEDs on the front panel lite?

  The diagnosis Codes are HERE. NOTE from the ADMIN: Broken link has been removed from this post by Dell >

  Have you checked that all the cables to the motherboard and the disks are properly connected, by disconnecting and then reconnecting them?

  Bev.