Satellite L40 - 18W - Touchpad does not work

Similar Questions

• Satellite L50-A013 - touchpad does not work

  Hi all

  I've had my L50-A013 Satellite for about 7 months now.

  In the last month or so I started to have problems with the touchpad, freezing and does not not my contact.
  This lasted a few minutes at a time, then came the back of its own accord, almost like a very long latency period.
  This morning, however, I turned on my laptop and the touchpad does not work.

  Device Manager does not display a mouse or pointing device at all until I attach a mouse USB.
  By pressing the key that normally activates / deactivates the touchpad does not work - nothing changes and the light does not turn on in both positions.

  I tried reinstalling the drivers without result, and windows is no update that might help (or any recently that might have caused the problem).

  If anyone has any other ideas for what I can try, it would be amazing.
  The laptop is under warranty so I can hopefully get it fixed, but if possible I would really do not have to go without a computer until it's settled.

  Thank you all for your time,
  -Sase

  Hi Sase

  It is not easy to say what the problem is, but I can imagine that there is hardware problem. Perhaps touchpad loses the connection to the motherboard. I mean if this piece of hardware is not detected I can imagine this scenario.

  Of course best test you can do now is to reinstall OS and test functionality with the factory settings, but will delete your actual configuration of OS and software pre-installed.

  If this kind of test is possible do. If not, I think you must contact the nearest Toshiba service provider and ask for help. They have special diagnostic tools and they can check it for you.

• Re: Satellite P205-S7469 TouchPad does not work

  Hi guys.

  I bought this computer a year ago in the States. Then I moved to the Sweden.
  My hard drive crashed. Buy a new
  But I left apperently all CD for the computer back to the States-. -.

  So now, I have downloaded Microsoft windows Vista Home Premium because it's what I had before.
  Used the CD Key which was written under the computer.
  If everything works Gr8 except my Touch Pad...

  I installed all the Windows Update drivers were able to give me.
  Went to support toshiba and downloaded page the drivers from there.
  But still, nothing. It won't work.

  Anyone know what I can do? Or what is the problem.

  Thank you all for all the help you can provide me.
  Lol XoXo

  Hello

  I have no idea why the touchpad does not work yet, you have installed the good drivers do you have?

  Are you sure that the touchpad is not disabled? Usually, you can disable the touch pad using the FN + F9 key combination. Check it out.

  The P205 Sat is very similar to the European model Toshiba Satellite P200.

  Maybe you can download two Touchpad (Alps Electric and Synaptics) drivers from the Toshiba European page choose either of the P200 series and check the drivers!

• Satellite S50T-B950 - touchpad does not work after update of Windows 10

  Hello "Toshiba."

  After the update for Windows 10 I have a problem with the touchpad does not work and became come boiling Forum and found that the solution is to uninstall "MOMENTUM Input Device" to "Device Manager", finally worked the touchpad, but alas multi touch properties such as: "zoom/minimize gestures of scrolling and two-finger" no longer work

  Please help me solve this company of Toshiba problem

  The same theme has been already discussed and resolved in this thread:
  https://Forum.Toshiba.EU/showthread.php?83885

  Then please follow the proceedings in the other thread to avoid misunderstandings

  by the way: here is the link to pilot site Toshiba win 10:
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

• Satellite L500D - 16L - touchpad does not work.

  I have a new L500D but my touchpad does not work.
  My diagnosis of computer told me that there is no problem, I have a mini mouse USB connected, would that be causing a conflict?
  Can someone please give me some advice.

  Thank you

  Try to press Fn + F9 to toggle the Touchpad. Also take a look in the BIOS, the touchpad can be disabled it. Also try to uninstall the software for your mouse USB mouse (if you have installed everything), this software can cause a conflict.

• Satellite Pro L300 - touchpad does not work

  Hi all that I need help urgent because it drives me crazy. First of all, I use XP PRO. My laptop is fairly new, only around the age of 4 months, I had no problem with it at all. I formatted my laptop yesterday and reinstalled all the drivers that I downloaded here:

  http://www.ISD.Toshiba.com.au

  and everything works fine except the touchpad. I have already installed shared, utilitarian toggle the touchpad Module and I have the latest BIOS installed and reset all default settings and I made sure that the touchpad is enabled in the BIOS, but also pressing FN + F9 to enable during Windows.

  I installed the latest touchpad driver Synpatics I downloaded from the homepage of Synaptics. But for some reason any, that it does not work, I don't know what is the problem here. My touchpad worked before I formatted my laptop, it worked fine and has never had any problems. Will you please tell me what is wrong because I need to use my touchpad sometimes as well, so I can't use a mouse all the time.

  Hello

  > I installed the latest Synaptics touchpad driver that I downloaded from the home page of Synaptics
  I think that you question refers simply to the driver for the touchpad that is missing or incorrect.
  I put t know how it works on Toshiba notebook Australian, but the Toshiba European Satellite Pro L300 units needs touchpad different drivers. some use the Toshiba touchpad driver and some units need a driver for the Synaptics touchpad.

  In your case, I recommend this controlled again.

  By the way; My touchpad is always disabled so that en external mouse is connected.
  It is parameters that control it. Please check in your touchpad properties too!

• Satellite L40 - 15G - WiFi does not work - cannot activate usign FN + F8

  Hello

  I have a toshiba satellite L40 - 15 G with windows 7 32 bit and my wireless is not working, the pilot is OK
  I do FN + F8 and I can't active wireless :(

  What should I do more?

  Hello

  The Fn + F8 isn't really essential to use the WiFi network. Generally, the WiFi network should be enabled by default.
  So even if the Fn + F8 does not work, the WiFi network must be enabled.
  You see the local network card in Device Manager? Is it correctly recognized?

  Where he is, follow these steps:
  Go to the control panel (switch to the large or small icon view)-> network & sharing Center-> left column manage wireless networks
  Add here new WLan and configure it by using the right SSID, encryption and password encryption.

• Satellite L40-143 - WLAN does not work with the new router

  WLAN on my Satellite L40-143 does not work since I Modem Alice-1121.

  Who can help me, please!

  Hi kenny_21,

  If you have a new WLAN router you must change the configuration that I think

  The new router is visible under WLAN connections and can connect?

  If so try to connect. The standard router password can be found in the manual of it and no doubt, there will be new addresses MAC first before connect you. I put t know the exact configuration.

  Also check the options the WIRELESS card with TCP/IP. Usually, you need automatic IP addresses.

• Satellite P20 PSP26C - touchpad does not work

  Hello...

  My touchpad P20 went down all of a sudden. I've tried everything. Fn + F9 key does not work when I try it will stop the computer.

  I reinstalled the driver several times. I've had enough, so I work with a USB mouse.

  Anyone know how I can retrieve my touchpad. (ALPS)

  Thank you

  Hello

  Eventually he s a hardware malfunction?

  But before that we will offer you a defect of the touchpad, you must reinstall the laptop with the Toshiba Recovery CD delivered to check if this problem could be linked to the software error!

  Usually after installing the recovery CD the laptop will be put back to the factory settings and the whole system should work fine.
  But if this doesn't help then the material could be really defective and a replacement is necessary!

  So check that out!

• Satellite L50D-B - TouchPad does not work properly

  My TouchPad is not working properly, it stops working after a few seconds after the start. Can someone help me?

  To be honest, it is not easy help these problems.
  What exactly happens? Touchpad is completely off? I want to say is there any kind of reaction?

  Have you tried to turn again using the F5 button?

• Satellite L305D-S5873 - touchpad does not work under Win XP

  HUGE problem
  Key Satellite L305D - S5873 DOESN'T work under XP.

  I am with XP now and doesn't work, while I had Vista it worked and he stopped.
  Then I installed the xp and still, it does not.

  Hello

  So you say that the touchpad works properly using the Vista operating system, but you are not able by using the touchpad running Win XP.
  Is this good?

  If Yes, then I think that you have not installed the XP drivers good touchpad.

  Satellite L305 belongs to the Toshiba U.S. series and you should visit the Toshiba driver page us to get XP drivers

  Sorry, but for me it s a clear case. It's a softer question, and possibly the right driver installation is required.

• Re: Satellite L40 - 18Z - keyboard does not work properly

  I have Satellite L40 - 1BZ and only vowels will work when you try to open a session?

  I turn the laptop on and I tried to enter the password (using Vista home Premium) and it will just hit me the vowels and Caps lock?

  Help someone mention I could download the BIOS but I put t really know what I m doing.

  I imagine you have this L40 longer and it will be interesting to know since when you noticed this behavior strange keyboard.

• Satellite C70 - B - Touchpad does not work

  A couple of months, I bought the Toshiba Satellite C70-B-212. However, in recent weeks the Touchpad no longer works. I already reinstalled the driver, but that didn't help.

  What can be the problem?

  Go to the BIOS settings and check if the pointing device is enabled.
  You can also load default settings in the BIOS. This should allow the pointing device (touchpad) too.

• Satellite L40 DVD playback does not work

  I can't play DVDs on my Satellite L40. I get no error message, that a message that there is no disk is inserted.

  Can anyone help?

  Hello

  Are you trying to use original DVD films and also use preinstalled application WinDVD?

• Satellite L505-13N - touchpad does not work in Win 8.1

  Hello

  I have a Satellite L 505 - 13N and installed windows 8.1.
  While a lot of shortcut keys (screen, lock, sound, etc), I can't properly control the touch-pad.

  Initially in Windows 8.1 where the drivers for touch-pad (Synaptics PS/2) installed.
  Device Manager indicates that the device is installed and working properly but it doesn't.

  I found and installed the driver package "Scrybe-64_Signed_Marketing_SGS94_UI-Synaptics_v15_2_20_C_XP64_Vista64_Win7" but I still can't use the device...

  I already saw that my device is not supported for windows 8 (I wonder why?)
  but I you'd be grateful if someone could propose an idea for her to wake up...

  Greetings
  Argi

  The driver package installed Synaptics doesn't seem to be compatible with Win 8.1.
  In the description, it says clearly: Vista 64 bit, Win7 64-bit

  Maybe you should just try to install the driver for the Synaptics touchpad which was published for others, new laptop models. New notebook series supports Win 8.1 and in my opinion, there is a good chance to get the touchpad working using the Win 8.1 driver version.