Satellite L40 - 18Z starts

I had this phone for almost 2 years now and one day I was on it, but stupidly fell asleep, it ran out of battery and not started again, because when I press the button power power light turns on and it sounds like she s start up then nothing happens and the screen remains blank , but the fan comes on from time to time if I let on.

Can anyone help?

Thank you

Remove the battery and leave the laptop without power for some time.
Then try to start your laptop with AC power only (without battery).

Tags: Toshiba

Similar Questions

  • Satellite L40 - 18z - black screen on startup

    I have Satellite L40 - 18z. It has a black screen when I try to start it. I took out the battery unit and unplugged overnight. And again, I have a black screen.

    Is there anything else I can try?

    Have you tried taking it to warranty service?

  • Satellite L40 - 18Z - how to turn on wireless?

    I have Satellite L40 - 18Z running Windows Vista Service Pack 2.

    I've had a few cases where the wireless seems to have failed. On this instance, the LED at the front does not shine despite the switch is either off or on position. I checked the network card settings and it is activated. I have disabled/enabled the adapter, but without success. I uninstalled and reinstalled the driver - with no success. I checked for the latest drivers, but they are already installed.

    I also deleted and reinstalled the adjacent wireless card to memory, there still without success. The network and sharing Center diagnosis indicates only that the without wire must pass away - but I am unable to do so.

    Any advice would be welcome. Thank you.

    Hello

    The WIFI connection can be activated in different ways: with the hardware switch you have ever tried and key combination FN + F8.
    So have you activated the wireless network card by pressing FN + F8?

    From my own experience, I can say that the WLAN led is only if you use this key combination too.
    Check this box!

    In addition, you wrote on reinstall drivers WLAN you have installed you exactly? The most recent and pre-tested WLAN drivers, you can find the Toshiba site.

    Last but not least, I also updated the BIOS, if nothing else works.

  • Satellite L40 - 18Z - unable to connect to the wireless network

    Hello.

    I just bought a Satellite L40 - 18Z. I tried to connect to the internet wireless, but I get the following message: "this computer doesn't have a card installed and configured wireless network."

    When I bought it I was told that it was active wireless.

    Can anyone help?

    Hello!

    Have you checked if the hardware switch wireless on the front of the laptop is on?

    You have yellow exclamation points?
    The wireless adapter is recognized?

    Maybe you should also update the driver and/or BIOS.
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    Good bye

  • Re: How to restore to factory on my Satellite L40 - 18Z?

    I'm trying to restore my laptop to factory settings; It's a Toshiba Satellite L40 - 18z. I tried the F8 procedure it did not work, also was in backup and Food Center, but it leaves me only the backup files. I guess I m going to need a disc, I'm OK, any help would be appreciated.

    Gary

    Yes you are right. You need for installation of recovery image recovery disk.

    If you n t have it maybe you can order a new one on https://backupmedia.toshiba.eu/landing.aspx

    Another solution is to install own OS using the Microsoft installation disc.

  • Use WLAN on Satellite L40 - 18Z with Windows7

    Hi all

    My laptop is Satellite L40 - 18Z.

    Recently it has been upgraded from Windows vista to Windows 7. After the upgrade wireless light was not lit. Also Fn F8 key and the Fn, keys do not work. Could someone help me solve this problem?

    Kind regards

    Spinning wheel

    Have you installed drivers all available tools and utilities that Toshiba Value Package added?

  • I can't turn on the Wifi, Satellite L40 - 18Z

    Hello

    I use Satellite L40 - 18Z but I can not turn on Wifi.

    I am very sure that peripheral lla is installed another property and I tried a few ways to turn on the Wifi device but never turned on. Of course, never caught the signal. Rooter has no problem either.

    Manager says Deveice peripheral island works another property. And the driver is correctly installed. But I can't turn on parameter of network or windows Mobility Center.

    It's very embarrassing to write something like that, but I need your help.

    PS This is the first time that I post on this thread, but who answers? Toshiba support team?

    Thank you

    Hello
    You said, did you check if the device is properly installed in Device Manager. Is there a red X on the wlan module in the list? And he must have this name: RTL8187B.

    There are several ways to enable the wlan on your laptop. One, is the hardware switch of your laptop, the other thing you can try is a combination of FN to FN + F8.
    You can control if the WiFi is working when you see the symbol of the LED is on or not.

    Finally, it is a forum for user to user here.

  • Installing WXP on Satellite L40 - 18Z

    Hello

    I recently bought a laptop: SATELLITE L40 - 18Z, MODEL No. PSL48E. One of their salesmen dim wit forgot to mention that the warranty expires once you remove the VISTA machine.

    I make music and need for XP as no software has caught with VISTA yet.

    Someone out there has done this on this machine? It works if you download all the drivers for the model of the toshibas download section? When you have to install the drivers and through what media bring you on the machine? Do yuou should reformat the hard drive at all prior to xp?

    I'm not clued by all means on this side of things for any help/advice would be much appreciated!

    Thank you

    Post edited by: ADMIN

    > One of their salesmen dim wit forgot to mention that the warranty expires once you remove the VISTA machine.
    That s is not true.
    If you want, you can install the XP. That will not affect the warranty!

    If you want to install the Xp you simply boot from the XP CD.
    Then, you will need to include the SATA (Intel Storage Manager) driver using the F6 key during the installation procedure.

    All or all the drivers needed XP, you should find on the page of the pilot!

    See you soon

  • Satellite L40 - 18z - what motherboard can use

    Hello

    my laptop has a motherboard very defective toshiba satellite L40 - 18z model no PSL48E-033008EN.
    My question is; are there other phones I could use to replace my motherboard with.

    I'm looking on ebay etc for a laptop of donors but they are few and far between, where the question on the search for another brand/model that would suit.

    Thank you very much.

    Hello

    Laptop motherboards are always different so that there is not a lot of opportunities.
    You must use a motherboard that has been developed for Satellite L40 / Pro L40 series.

    But note; new motherboard is one expensive laptop parts maybe that it s better to buy a second hand instead of the new motherboard unit. I think it would be a less costly solution

    Good bye

  • Satellite L40 - 18Z: warnings of Tempo that 75% of the memory has been used

    My dad recently bought a satellite L40 - 18z.

    Tempo began to give warnings that 75% of the memory has been used.
    When I checked there a 74 GB HDD with 3 partitions top - 1.46 GB (which I assume is the recovery partition), GB 37.26 labeled 'Vista', containing the OS and all the rest, and finally Go 35.80 labeled 'Data' which is empty.

    The partition 'Data' is necessary?

    Or do I have to move all of the documents on this partition, and if so why not been put there by default?

    My father is not very computer and I find it strange that the hard drive is not that way. It could very easily write the Vista partition and thought it was! And ended up paying someone to put a bigger HDD in or sorting.

    It seems to be no mention of partition 'Data' in the documentation or advice on how to use it.

    > Is the partition 'Data' necessary?
    Well, you can use this partition for data storage.
    I mean you don t need to store files such as mp3, jpg, etc. on the system partition, but on this partition.

  • 2 partitions turn 1 on Satellite L40 - 18Z

    Small prob; just need to know how to make two partitions of hard disk 1.
    I can format it and reinstall a new copy of windows?

    I have 6 GB of free space on each and you want just a new beginning.
    When I start the laptop I have the choice of two os systems; Vista or win7 so I know ive made a mistake somewere?

    No personal information on laptop I want to keep just want to set it to factory setting bk so I get all the space free hard drive and you can install win7 instead of vista?

    pls help :-)

    L40 18Z
    Model: PSL48E

    Hello

    If I understand your question; you have two systems installed on your HARD drive and format the entire HARD disk to install only a single system. Right?

    You can format the HDD set during the installation of Win 7 OS.
    Boot from the Windows 7 disc and during the Setup process, you will be asked to format the HARD drive.
    Then format the whole HARD drive and this will remove two partitions.

    I hope I could help you if it is not please post more information

  • HARD drive internal upgrade to Satellite L40 - 18Z

    Hello

    I intend my 80gig HARD internal disk transition towards greater capacity, what specification would you recommend?... Is also the reader in my L40 - 18Z SATA or ATA (ide)...
    All advice welcome...

    Thank you
    Dave

    Hello

    Satellite L40 has a 2.5 - inch SATA HDD, and according to the specifications, supports hard disks up to 200 GB.

  • Satellite L40 - no start

    I have a month old Satellite L40-17s. Now when turned on I had a completely black screen with just the white arrow on the screen pointer. NOTHING else. When I turn off, the power LED flashes orange - which seems to indicate that the computer has been in mode 'sleep' (slowly).

    However, turning on wakes up NOT he. Tried to turn and several times. Absolutely nothing - just a black screen and won't start. The Green drive light flashes that I press the power switch.

    Any ideas on how to start up again?

    Hello

    Does not sound well :(

    Before you call the ASP in your country, try this:

    -Unplug the power adapter
    -Remove the battery
    -wait about 20-30 min
    -reconnect the battery and the AC adapter
    -try to start the laptop

    If this doesn't help not using ASP would be needed!

    Good luck

  • Re: Satellite L40 - 18Z - keyboard does not work properly

    I have Satellite L40 - 1BZ and only vowels will work when you try to open a session?

    I turn the laptop on and I tried to enter the password (using Vista home Premium) and it will just hit me the vowels and Caps lock?

    Help someone mention I could download the BIOS but I put t really know what I m doing.

    I imagine you have this L40 longer and it will be interesting to know since when you noticed this behavior strange keyboard.

  • Why Satellite L40 - 18z usually connect to the internet?

    Hello

    I'm trying to fix a L40 18z to one of my friends and im having some trouble getting the network adapter and wireless network card works properly.
    What's wrong?

    I reformatted the hard drive, installed real vista 32 bit service pack 2.
    Downloaded all the drivers for the L40 18z of toshiba and the realtek lead toshiba drivers do not work: O)
    The led light for the built-in wireless is not turn on?

    Theres 2 unknown devices in the devices (those of the wireless card lan) Manager. I think that the otherones, a usb port controller. (something to do with the #0003 port
    I plugged a direct cat45 cable to my router and it does connect it says just local.
    I tried a USB to external usb 802.11 g and it doesn't connect either. When I managed to get to tell local and internet, that would still not connect.

    What is the problem someone?

    As I begin to think that the motherboard is tired...
    Oh and I flashed the bios by using the update from toshiba.

    Any help would be greatly appreciated thanks: O)

    Looks like you just need to install drivers.

    These two unknown devices right-click and click Properties, go to the Details tab and tell us the numbers VEN_xxxx and DEV_xxxx.

    You can determine what these devices are entering the FRI and DEV numbers in this Web site: http://www.pcidatabase.com/

Maybe you are looking for