Satellite L40 is power on but the screen is blank

Similar Questions

• Satellite A300 - system still works, but the screen is blank

  Hello

  I was downloading an update of tempro toshiba (synco or something in that sense) for my laptop Satellite A300 and the frozen screen. I pressed the power button for 5-10 seconds until it is turned off. When I turned it the system seemed to work but the screen is completely black.

  I tried to remove the battery, and fn + F5 but the screen still won't turn on.

  Any help or advice would be appreciated.

  Rob.

  Hello

  It happened because of the updated BIOS, or during the common software update?
  In case it was an update of the BIOS I recommend contact the ASP in your country, because it seems that the ROM module must be flashed again.

  If it happened during a common software update, so I advise to remove the battery and the AC adapter and wait an hour.
  Then reconnect the two parts and check to see if you could power the laptop properly!

  Check it out!

• Satellite A300 starts but the screen is blank

  My laptop Satellite A300 broke down after opening a zip file, I think it was called flash microsoft.

  The laptop starts but the screen is blank.

  Any ideas?

  You see anything on the screen when you start button / stop?
  See Toshiba welcome screen?

• NB200-10Z starts but the screen is blank

  Hello

  I have a Toshiba NB200-10Z netbook.
  It turns on but the screen is blank.

  Can someone help me coz I don't know the cause of her

  Hello

  Try this:
  Remove the battery and unplug the AC adapter.
  Then wait a little (1 hour should be enough)
  Then reconnect both sides and try to turn on your NB200.

  If it s not a serious issue, then your NB200 should turns correctly.
  Otherwise it s a serious question, and you will need professional help from a technician of the ASP.

• Qosmio X 770 turns on but the screen remains blank

  So my Qosmio X 770 turns on but the screen remains blank, it was randomly turning every so often, but now it is just blank.

  The hd works fine again, I tried to plug it into a TV to see if it works, but no signal is found. I was informed by a friend that it could be a problem with the graphics card, I wonder if it can simply be exchanged if I buy a new one or if he joined, and I have to replace the whole motherboard?

  Any help would be appreciated.

  Even if the HARD drive is faulty, the laptop should be able to IT and you should see the home Toshiba on the internal display screen.
  If its definitely NOT drive HARD problem.

  You said that you have connected the laptop to the TV. You see the start of Toshiba on the external monitor (TV) screen? Are you able to access the BIOS by pressing F2?

  If this is not the case, there is certainly a hardware problem.
  It could be a fault of memory modules, graphics card or the same motherboard malfunction could be possible.

  GPU problems or the motherboard, the whole motherboard must be replaced and that's expensive fix because mobo belongs more expensive laptop.

• I had checked "extend my desktop to this monitor". I have only 1 monitor though. Now the screen is empty. I rebooted the pc in the hope to go in safe mode but the screen remained blank.__How can I go back to single screen? __

  I had checked "extend my desktop to this monitor". I have only 1 monitor though. Now the screen is empty. I rebooted the pc in the hope to go in safe mode but the screen remains blank.
  How can I go back to single screen?

  Hi Bilipino,

  You have more than one display card? Try to connect your monitor to the another card and see if you can get the display.

  Reference: http://www.microsoft.com/windowsxp/using/setup/hwandprograms/monitors.mspx

  I hope this helps...

• dv7 work, but the screen is blank

  I had my dv7-4180us for a month.

  The screen just deleted one day... the backlight of the lcd screen is turned on, and when I connect to an external monitor it show that the laptop itself works very well.

  When booting the laptop, the screen flickers when the hp logo comes on with the 'Starting Windows' screen (it flashes briefly and remains off even when you press F8 to access the BIOS screen). A cursor then comes to the screen (with the circle "busy" thing), for approximately 2 seconds, during which the display IS stable. Then that's it. You hear the sound when the logon screen is supposed to appear, and also when Windows actually loads. Occasionally, it sparkles, but the screen remains blank with the LCD backlight on. Fan comes on intermittently, as usual, all lights are functioning normally.

  Once she nomalised by itself for about 2 days, then deleted again. Windows restore did not work. The only support of HP said something had to perform a recovery, as it could be a windows problem. But it won't have the same BIOS display!

  Help!

  Hi again sent to the laptop to hp. came back, with the display now works correctly.
  On the worksheet they have ticked 'View' and 'Cable '. So, it is obviously a cable problem.

  Thank you all.

• Satellite X 200 - 15 K power on but the screen is black

  Hello

  I have Toshiba Satellite X 200-15 K, two days ago, I have problem with screen, the screen I have noise, I think it's the same error in my display driver and I have stop near windows xp and try to after 1 min, but the screen has more noise when the startup boot image and I stop by button / stop on laptop.

  Then do what I ve tried again to turn on my laptop but on the screen, I see only artifacts (same squadrons of colors) and after that, my laptop can not work, I tried to power on him but I only power led and HDD light works only 5 sec and after off the coast, and the cooler works 5 sec too and after offshore.

  I tried to remove the battery and the RAM and the wireless and all that I can :), but nothing happens, but when I try to power without RAM I see on power light beep two red and two yellow (IE my motherboard work).

  Maybe it can help me. I think I have dead motherboard.
  And for me, it is interesting that someone may have similar problems.

  Thank you.

  P.S Sorry for my English :)

  Hello

  Let's summary.
  You had a few artifacts on the screen, and now, you are not able to start the unit.
  Nothing appears on the screen; Neither the Toshiba start screen appears is good?

  Hmm seems material issue I m thinking about GPU (graphics chip).
  What do you think of this?

  If it's really a problem of graphics card, then you will need to replace the motherboard.
  In most cases the chip belongs to the mobo anyway... something like this can be done by an ASP in your country.

  Then please get in touch with the guys to get more details about this

  I wish you good luck

• Satellite L40 - does not start and the screen is completely blank

  Hey guys,.

  A good friend of mine has a laptop Toshiba Satellite L40, who died recently, and she has not been able to find the warranty documents yet, so I wanted to ask if maybe you could help.

  Basically, what's happened is that one day she was using the computer and not have noticed that it was not plugged in to charge, and before completely lost all power, the computer went into automatic hibernation mode.
  It plugged into the charger, the lights indicated that he was in charge. A few hours later she was trying to turn on, but nothing. the computer itself gives off a sound very low, as if turned on, but the screen is completely blank. She said that it's almost like she couldn't make the thing out of hibernation mode. He continues to give sound and some indicators remain lit until the battery is running out of charge.
  She has Windows XP is installed on the computer.

  Perhaps someone could help as to what is happening here? 1 million thanks!

  ME

  Hello

  Weird, but have you tried to remove the adaptor AC/DC and battery? Wait one hour and then reconnect the adapter AC/DC and battery. Maybe the laptop restarts.

  If this isn't the case, I think that you need assistance from an authorized service provider. It seems to be a hardware problem and the laptop should be checked by a technician from Notepad to determine the cause of this problem.
  On the Toshiba site, you can search the nearest ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good luck!

• Satellite P10-304 turns on but the screen is off.

  Hi there... Please someone help me. I m having this problem since last week with my P10-304... it was working fine... but now last week I turned it off and turned the morning we return on the use of battery that he kept on going stand-by mode... and when I turned it off again and plugged the AC adapter is on, but screen didn't seem to turn on...

  I thought that the screen has gone... but last night I turned it on. He walks and went to hibernation! Don t know why. And now the same problem again... I turn power turned blue and the screen is blank (as it s off) I put t know what to do. I tried using the recovery disk. But nothing comes on the screen, as I said, the screen is blank as is it turned off s.

  Please help me... !!!

  Hello

  Well, this is a strange question. It's not easy to say what can be the problem.
  But first you must remove the battery and the AC adapter for 1, 2 hours.
  After this procedure, use the power supply for the test to work.
  If the problem is still topical, I guess that it s a hardware malfunction.
  In this case, the best way is to contact the service partner.

  Best regards

• Re: Satellite A135-S2276 - does not start, the screen is blank

  I have a Toshiba Satellite A135-S2276, I bought 2 years ago. It worked fine except the clock which has never kept the exact time since I bought it. I turned it off Sunday night as I do regularly. But he could not turn it on Monday afternoon. The power light is not on when you turn it on, but primer. The light remains on but does nothing. The screen is blank when feeding it works.

  Can someone help me with the answer? Thank you

  Dennis

  It's hard to say what is happening to your knees. You can access Bios? Try to connect the external monitor and see (maybe the screen of the laptop disappeared)...

• my phone has sound but the screen is blank

  I made a phone call. I can hear people talk but may the screen is blank and I cannot complete the call. What should I do?

  You can hang up with the sleep/wake button. Then try to force the phone reboot now buy the button sleep/wake and home for 10-15 seconds. -AJ

• BlackBerry phone Q5 looks like it is on, but the screen is blank

  My Q5 dropped on the floor, and now it seems that it vibrates and flashes when I receive messages and phone calls, but the screen is completely blank... Does anyone know how to fix this?

  you have either broken something or something fell off

  I did take a part yet, but there are some top youtube vids if you want to see if it could be something loose

• HP Pavilion g7-1261nr turns on but the screen remains blank

  I turned on my HP Pavilion g7-1261nr the other day, and the fan ran hard, as well as the caps lock and number lock LED flashes once every two seconds. The screen remains blank during the process. Could someone help me with this problem please?

  PcMatic I invite you to read the links provided, because they are there to help.

  If you entered my link, you would have seen this:

  Caps Lock/Num Lock LED component tested error Condition

  LED flashes 1 time CPU CPU not functional

  2 times for BIOS BIOS corruption failure LEDs blinking

  LED flashes 3 times non-functional Memory Module error

  LED flashes 4 times Graphics Graphics controller not functional

  Map of 5 times the system board failure system general LEDs flashing

  Authentication failed for the BIOS BIOS 6 times blinking of the LEDs

  According to the times that they blink, of what I mean, it's once and then a pause. Which would indicate that the CPU is broken.

  Only a repair can fix that.

• Premium Staples Web site does not, he says it's done, but the screen is blank, why?

  I try to go on this site, but he said it was done loading and it's just a blank screen.

  URL of affected sites

  http://www.staplesrewardscenter.com or https://www.staplesrewardscenter.com

  You have this problem when running in Firefox SafeMode?
  http://support.Mozilla.com/en-us/KB/safe+mode
  Do not choose anything at the moment, just use 'continue in safe mode.

  If this is not the case, see this:
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+theme...