Satellite L40 - Sleed and standby does not work correctly
I have a portable Satellite L40 and it worked correctly until now. I turn and after I have put on standby (stand-by) mode; When I want to use my system, so to get that back to normal (I press the turn power button to exit the mode "standby" button), Windows Vista 32-bit restarts - it is not back to the moment I left it before the "sleep mode".
Therefore, restarting Windows Vista 32-bit, and the screen "Windows has been disabled incorrect" appears instead to return to the configuration of the system that let him before sleep / standby mode.
What can I do to fix this and make "sleep" mode works correctly?
In your case, I'd do a BIOS update. You can search for updates on the Toshiba site
You should also look into the mangment of power. Here, you configure what happened when you close the screen, press the power button and so far.
I found a great thread on this topic:
my video and streaming does not work properly, his game and stops all the time.
1. this happens when you play movies or videos saved on the computer?
I suggest you to follow these steps and check if that helps.
If this happens when you stream or watching videos online, then I suggest you day flash player latest version and check if it helps:
If the problem occurs even when you try to play the recorded video on the computer, then try to update the latest drivers for the video card and see if it helps:
For more information, see this link:
It will be useful.
Hello, this is my first post on this forum!
My windows installer does not work correctly.
What should do?
Soryy, but I did not now much on computer systems.
I have reinstall this installer?
I'm waiting for your answers.
> My windows installer does not work correctly.
What do you mean exactly? You see a mistake? What exactly happens?
Maybe your CD is scratched or damaged.
I bought this phone 2 days ago, but when I try to connect wirelessly, it does not work.
The switch is set on it, but the light is not.
in the Device Manager, it says the wireless LAN card is working properly.
Try using the FN + F8 key combination to ensure that the wireless network adapter is correctly activated.
On my Satellite Pro S500 (preinstalled Windows 7 64-bit) change the brightness by pressing FN - F6 or FN + F7 does not work. The other NF - f... combinations seem to work correctly.
When I press FN - F6 (or F7) a control box to change the brightness to poster (as expected), but the level is still displayed as "1" independent of the current value (for example changed from Control Panel or with the eco utility) and it is not possible to change it with FN - F6 or F7. I just reinstalled vap and restarted the computer, but nothing has changed.
I put t know what s wrong exactly but normally the FN keys are associated with value added Package, but you wrote that you already reinstalled
In my opinion, you should try a system restore to an earlier point. Maybe something messed up the registry, you can start System Restore in Windows Advanced Boot menu.
I have a problem that when I unplug my computer I lost the internet connection and wifi is not working properly. Sometimes wifi can't even find a connection even if there are autour wifi access points. As I lost the connection 3 times while writing this.
How can I solve this problem?
I don't know if this will help but check advanced power setting please > wireless adapter settings > power save mode and do not forget that performance Maximum option is set on a battery option.
Please test and send feedback.
I bought laptop Satellite L40 - 17O a couple of days. Wireless LED doesn't work. It worked the first time after I installed the OS (XP SP2) top, and now it doesn't work. I didn t try again Wi - Fi.
I don t know is that it works or not. Maybe it's just a problem of LED.
What do you suggest me?
The WiFi network works with the original image of preinstalled Toshiba?
I mean this laptop came with Vista and normally everything should works using the Vista operating system.
I assume that you need to install a compatible XP WLan driver for notebook simply you all what s
I formatted my laptop "L40 - 18w" after that all usb ports do not work.
Could you please help me on this issue
Ben is right. After the installation of the operating system as a first step, you need to install driver chipset.
Please see the download page for Toshiba under http://eu.computers.toshiba-europe.com
There you can find all the drivers for your model of laptop including driver chipset.
When I close the lid on my laptop it indicaes which is mode ensures by flashing of the green light but when I lift the cover upwards, it is said that windows were not close correctly.
I checked all the settings and they seem ok. What could be?
What settings did you check exactly and what operating system you are using?
I have the Satellite L300 and Windows XP. I m using TOSHIBA Power Saver and here I can put what happens if I close the lid, press the power button / stop, etc..
In addition under XP check TOSHIBA Power Saver profile is selected in the Windows power options.
My ethernet LAN doesn't work anymore - laptop computer signals that it is fine - when I plug a cable in there still says no cable attached.
I've updated all the drivers - is their a FN key that turns off? or can someone help me?
What laptop Satellite you have exactly?
The LAN port can t be enabled or disabled with a FN key. It is possible that wireless (FN + F8).
Have you tried to update the BIOS? You can find it on the Toshiba site:
http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers
I have a Satellite Pro 6100 (PS610E - 02c 60-GR) 1.7 Ghz, 256 MB, 40 GB, 15XT and a Geforce4 420 Go (32 MB) graphic card. Until yesterday it was working properly. Now, there are colors on the screen and there was a blue screen a few times, which says something about my graphics card (it disappeared from fast read).
I uninstalled the old driver and reinstalled twice. Nothing has changed. Also I tried with an external monitor, but there wasn't any change, too.
Now my questions:
1. is it possible to change the graphics card (in particular, can I do it alone without a technician)?
2. How can I do this, is there some tutorials, especially for my laptop?
3. an another Geforce4, but for example a Geforce4 440 Go with 64 MB of RAM would fit in my notebook?
I thank very you much in advance!
The led flashes as it provides a microcode error!
This is especially if the malfunction of hardware has been detected.
I presume that the replacement of the graphics card is the reason!
As in previous discussions suggested the replacement of the graphics card is NOT possible. You don't believe!
Looks like that the BIOS cannot handle this new graphics chip.
Hi, I have a problem and I wonder why this happens...
After each request, Builder of backing bean is running again. In the constructor, I have a block that I want to run only at instantiation. I tried to solve that with isInitialRender and isPostback, but they are useless, anyone works not properly, can explain why the constructor is called after each request?
The problem is that you shuold not to put any code in the constructor of the bean. You cannot predict when the bean is instantiated, this can occur at different points in the life cycle and depends on the scope of the bean from 0.
You can use the technique where you load the data the first time it is accessed. In the Get accessor, you check to see if the value you're trying to get is zero, and if this is the case you call a method that initializes the data before returning.
I have a laptop M70-144. Pressing the button opens up internet Office level but will not start internet explore. This must be done manually. I have re-installed controls Toshiba and 1.5 Bios. Could someone please inform me of what may be wrong. I've never used the button so don't know not if she ever open IE.
Thank you very much
You n t need to reinstall the Toshiba controls again.
What you need to do is to properly configure the Toshiba control button.
In Control Panel, you can find the Toshiba control utility.
The first tab called buttons provides two parameter to configure the Internet and CD/DVD button.
There, you have to assign the Internet Explorer (default browser) to Internet button and apply the changes.
It should help.
Original title: connect a MP3 player to the poloroid mp3 files
Sorry for the caps, my problem is I just got a Poloroid MP3 and it does not work correctly as no movement between the icons etc. Y at - it anykelp like a download or something I can put it on its feet again. Thank you very much
Gary lumbard... e-mail * address email is removed from the privacy *.
Hi Gary lumbard,.
Thanks for posting your question in the Microsoft Community Forum.
According to the information of Polaroid MP3 player does not work on your Windows XP computer.
Since you are faced with the question with player MP3 of Polaroid, you can get in touch with ato Polaroid supported if verification updates is available for the player and for further assistance.
Hope the helps of information.
Let us know if you need help with Windows related issues. We will be happy to help you.
as the title suggests, the webcam built-in in my Toshiba Satellite P300D-110 does not work correctly. Allow me to explain. Using the camera Assistance software I can take pictures and record music. If I try to record a video preview screen comes black and the end result on black, pitch black aswell tuns.
Whenever I try to use my camera with applications such as MSN Live Messenger, Skype or on community websites, using Firefox, Internet Explorer or Safari the app crashes.
* How what happened? *
You tell me. That's how it happened;
* 1st day: I booted up my laptop and looked at my installation fresh and clean Windows vista Home premium. I tried my webcam using the webcam support software and it worked like a charm.
* Day 2: once I start my laptop and try to start my webcam only to find out that he is no longer functions.
To give a quick summary of the thread;
Help of camera Assistance software provided by Toshiba, can I take pictures.
Help of camera Assistance software provided by Toshiba, I can record the sound.
Using camera Assistance software provided by Toshiba I can _ * NOT * _ save or preview of a video.
* I can't start my camera using any other application such as, but not limited to; MSN Live Messenger, Skype, Mozilla Firefox, Internet Explorer and Safar.
* I downloaded and isntalled the latest drivers on the Toshiba site.
Portable listen is on a weekday.
I'm not sure what more I can do, all I want is for the webcam works, if someone can help me please do.
And if possible WITHOUT having to reinstall Windows Vista Home Premium.
I have not yet used and would not do as a solution to all the problems that might occur in the future.
a sad customer.
Camera Assistance software using provided by Toshiba I can't save or preview of a video.
Can you please describe the steps how you try to do this? I have to ask you this question because it works fine on my laptop. When the recording is finished Player opens and you can see saved the film. This is the avi format and at the top of this player, you can see the path where the film is recorded.
Strangest thing for me, is that you can not use it with Skype. OK for MSN is not perfect, but there is absolutely no problem with Skype. Make sure the settings and it should work somehow.
Maybe you are looking for
iTunes says to connect my iPhone 6 to update its software. Request you a code digit. I do that and it downloads and extracts of software. Then I get a message that says: On the iPhone 6 settings it says my version is 9.2.1 (13D 15). Someone can such
Hello Sir, I have GTPL connection broadband. I need to restart each time to connect to the internet. Like the technical GTPL that Netgear router IP of output you close your router. Once I have restart the router, it will publish IP. In IP address, it
I have a dell Powervault TL 2000 and it has the following error: Lost inventory - source probably empty, lost inventory, only empty because possible sourceCode: 8A 4 c Does anyone know what it is and how to fix (or troubleshoot)? I'm not familiar wit
My Dell Inspiron 6400 'Windows Vista' has been updated for "Windows 7" and the Dell 720 printer has stopped working.
I have my SMS/MMS and separate emails and everything works fine. I was curious but if there is a way to separate or filter the SMS and MMS messages. I had a few pictures that sent me a few days ago and now I have to go to half way through my SMS/MM