Satellite L450 - connection loose if I disconnect the cable

Similar Questions

• Satellite L450-136 no longer charge with the AC adapter

  I was wondering if someone can help me.

  My laptop Toshiba Satellite L450-136 charge is no longer with the AC adapter.

  It is now run out of dead and the battery power.
  I don't know if the problem is with the computer or the power cable.

  It was working fine yesterday and then not work this morning.
  Nothing happened as the computer having fallen or anything.

  Does anyone have any ideas on how I can understand the problem and then fix it?

  Thank you!

  To be honest, I have two different laptops Toshiba (U400 and Tecra A11).
  The two race perfectly and never had problems charging the battery or similar
  I have other laptop which is 8 years from another manufacturer but the battery is dead, but it's nothing unusual for laptop that is so old ;)
  One of my friends has the same laptop as your Satellite L450 and this also works

  > I don't know if the problem is with the computer or the power cable.

  This can be verified if you would connect a power adapter new and tested.
  However, I think that it s not worth it to buy a new adapter only to run some tests, this should be done by technicians for laptop
  If your warranty is still valid, get in touch with the ASP guys and check this box

• Satellite L450 - how to remove transparency from the bottom?

  Satellite L450-136, Win7

  Hi guys

  Can you tell me how to remove the transparency of the background it interferes with some programs?
  Thank you

  Hello

  You want to hide the task bar?
  If yes then that:
  Click on your Windows Start button just
  Choose Properties
  Now click on the first tab bar tasks
  Here, choose the option: Auto-hide the taskbar
  Apply the changes

  Alternatively, you can move the taskbar to a different position.
  Location of the taskbar on the scree helps you move the taskbar to the left, right or above

• Disconnect the cable in a VI script

  How to disconnect the wire between two terminals in a VI script?

  Get a reference to the thread and call the Delete method. If the wire is connected to multiple receivers, you can get references to the source and (other sinks), remove the wire, then reconnect to all receivers other than the one you want to disconnect.

• Satellite A30: PXE - E61 media test check the cable failure

  OK got this message on a cell phone of friends
  Others have played with him and made it worse, and now I received the laptop to try and fix.

  When you start to get

  PXE - E61 media test check the cable failure
  PXE - M0F outgoing PXC Rom

  If his tent to boot from the local network instead of the hard drive I have reset bios by default I disabled everything when I F12 boot to hard drive get the error message rΘation and one at a time, that nothing works even when I try to disable lan starts, he tries always to.

  When I try to install from disk backup it is hard disk not found, but in the bios the hard drive is located and can not boot from it.

  I tried with winxp pro disc to try not to get an OS on the laptop any partition to the OS but a blue screen with an error 0 x 00000050 CrashFree disk gives error 1170 if I remember correctly.

  I can't update the bios with new version because she needs windows, I can't stop the lan because there is no setting in the bios very minimul with about 4 useful settings in it.

  Is the hard drive turned or is this a bug in the bios that it detects drive hard, but does not assign a letter properly?

  If I try the recovery console in xp Setup there is no disk to read or write, if I maps the drive in recovery only the cd/dvd rom found no hard drive.

  Any help would be great thank you because I don't know what to do, I don't think that the hard drive is shot myself but maybe if I can get a laptop and try the hard drive what she will say if it is or not, but for now I'm stuck with no. had to go.

  I tried many things
  1. cdrom out and replaced plugs
  2. Jack hard drive out and replaced
  3 took Ram out and replaced
  4. start since the utility disk
  5. start from the winxp disk
  6. Windows XP recovery console no hard disk on c d e f g
  7 disc utility says no hard drive gives me a x: > promt error number 11030 invalid destination by car. Hard disk by bios HITACHI DK23FA-30-(PM)
  9 winxp error if I try to install 0x0000008e

  Post edited by: Shoa

  Post edited by: Shoa

  Hello Shoah

  You did what I would recommend.
  I remember what one of my friends has had a similar problem on an A200. But after the BIOS reset by default, he was able to install the OS from the recovery CD.

  The whole is very mysterious. It looks like a HARD disk failure, but the HARD drive is recognized in the BIOS. But have you checked the HARD disk in other laptop or computer?
  You can try to connect the HARD disk via the external USB HDD controller and could check if it s ok and could format.

  I recommend also to remove the CD/DVD drive and the HARD drive, then set the BIOS to default settings immediately (don't forget to save changes). Then try to power upward without the HARD disc and the drive.
  To my knowledge, you should get an error message.
  Then stop the laptop and put both the device in Notepad. Then go to BIOS and check if both devices are properly recognized.

  Finally, I must say that I don't know if my proposal will help m.
  If she won't help, you will need to contact an ASP in your country, because it really looks like a serious problem.

  Good luck

• Equium 2000: How to disconnect the cables strip of motherboard

  Hallo,
  could you please someone describe to me how to disconnect the two flat-band-cables the Equium 2000 with the low Group (readers) motherboard, that the connectors don't get corrupted.

  Thank you!

  Harald mueller

  Hello

  I'm not 100 sure that cables say exactly, but at both ends of the connector, you should see little "clips" or "parentheses". You have to put on the side. So normally it should be possible to pull the cables. But if you do, you should be carefully.
  But if you have no experience of these things, you shouldn't do it. In this case, the best way is to ask the guy to service for assistance.

• OfficeJet Pro 8500 a Premium: loss of connectivity wireless when I plug the cable on Officejet Pro 8500 a

  Successfully, I can connect an ethernet cable to the ethernet on the back of my printer port and print to the printer via the cable network.  I can unplug the ethernet cable and configure the printer features wireless to the printer and print successfully on the network wireless to the printer.  However, when I try to use wired and wireless at the same time (both running), it won't work.  If I try to turn on wireless with an ethernet cable connected to the printer, I get a warning message on the home screen, indicating that wireless printer can not be configured or turned on when an ethernet cable is plugged.

  Is this a limitation of the hardware printer or I have the printer configured incorrectly?

  I tried to reset the printer default network settings and reconfiguration of network but still have the same problem as described above.  On a HP Officejet 8600 A separate premium, however, I remember that the two cables and wireless can work at the same time.

  Thank you very much for your help!

  Hello

  This is a limitation of the printer, either a cable or a wireless network connection may work, you cannot use two connection options at the same time.

  Kind regards

  Shlomi

• Why two machines in my connection loose House would be the night while 3 have always. The status light in air port utility open orange both while it is still green on the other 3?

  What would be the status of 2 of my devices in air port utility 5 apple change to orange next to the icon internet (it looks like a planet) while the other 3 are still green and works very well. They were all working fine last night and didn't work this morning when I woke up. 2 devices that stopped working (status changed) are a 2012 macbook pro and iPad 2. the three devices that still work are a 2009 mac book pro, iPad mini 3 and an original macbook (white). I tried to pick up all the devices (modem/router/stop devices) and reboot but no change in status. I get internet from a modem connected to a time capsule (2nd generation).

  I forgot to mention that the macbook pro (2012) can connect to other networks, I have not tried with the iPad 2.

• Satellite M55 goes out when you disconnect the power cable

  Hello

  to unplug my laptop the plug rather than switch to the battery, my laptop turns off often simply even if the battery is fully charged. Other time things work as it should.

  I did some research and my problem seems similar to that detailed here in this post.
  Maybe someone knows the solution for this problem?

  Thank you.

  Hello Luke

  As in the other topic described, you must communicate with the service and explain exactly what is happening. I fear that there may be something wrong with electronic power supply. We can just speculate on this.

  I fear unfortunately there is nothing you can do alone.

• LAN broken or disconnected the cable

  the icon in the LAN system tray has a red X and says a network cable is broken or disconnected. my laptop network will connect by mistake. I visually inspected son and they seem ok - is there a way to be sure if it is causing me to lose my connection. appreciate any suggestion

  1. use a different cable

  2. go to start, Control Panel, network connections, right click and choose repair.

  What happens now?

  3. go to start, then right-click on my computer and select manage, select Device Manager, are there points of yellow exclamation that will tell you if there is a problem with a driver?

  4 do the following if you can't connect to the internet, make sure that your system is clean by running a scan with your antivirus which is this?

  5.

  Click Start, run and enter in the box:

  Msinfo32

  Click OK, and when the system info summary appears, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) the information back here in your next reply.

  You can change the personal information.

   

  Download, install, update and scan with these full free malware detection programs:

  Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  Remove all found, restart, and run again until analyses race clean, these can be removed later if you wish.

• disconnected the cable plug location unknown

  I'm working on a HP Slimline S5113W, that does not illuminate. I deleted food and tested it and it seems OK. I put it all back together and I have a son that I don't know where to put. It's the front set of SD USB card, two blue and black wires ending with a small white connnector. I can't find any documentation as to where this could go. Anyone know?

  Are you absolutely sure it's 2 blue and 1 black in a white connector?

  If it is 1 blue and 1 black, it does not connect to what in my HP s5120y (even on board and installation). This is the connector is wire-bound into a beam and weighs disconnected.

• Vista can connect to other computers on the network, but not to the internet

  I have a Vista computer that I just reinstalled and it is connected through a router Thomson to a Win7 machine and internet (or at least it should be).  For some reason any Vista machine refers to the network as a public network that I can change this private and turn on discovery.  If I do that, then the machine Vista can see the Win7 machine through the router, but cannot connect to the internet.

  I tried to use the disk driver for the Thomson router on the Vista machine, but at the time wherever he tells me to connect cable internet installation program does not detect that the cable has been connected.

  Troubleshooting with software Vista suggests simply reboot the router (that I tried without success).  Needless to say that the Win7 machine connects to the internet fine.

  I was wondering whether to try to remove the connection and start again, but unable to do so because when the cable is plugged in tells me you cannot delete an active connection and when I disconnect the cable network connection disappears and so cannot be deleted.

  Grateful for pointers

  Ian

  Hi IanRC,

  Try the following steps.

  Step 1

  You can try to disable the antivirus software on your computer and check if it works. Activate antivirus once you check the status.

  Note An antivirus program is designed to help protect your computer against viruses. You must not download or open files from sources that you do not have trust, visit Web sites that do not trust, or open attachments when your antivirus program is disabled.

  Step 2

  Try the Microsoft Fixit. Open the link below and click it on the Fixit button.

  http://support.Microsoft.com/kb/928233

  Check if it works and post back the result.

  Bindu S -Microsoft Support
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Unable to connect to the network in an OS Win 7 comments when the cable disconnected

  Hello

  I have a Win7 x 64 host with Workstation 7.0 executes 2 guests - is also a Win 7 x 64 and the other is a Win 2003 R2 x 86. Both work quite well when I have a cable plugged into the host network, but when I unplug it, the Win 2003 comments always connects to the network local vm end (for example I can ping the host and I have a correct IP address with ipconfig) while the prompt of Win 7 says "unidentified network".

  I have something special for the networking of comments (or even the host by the way) and that the guest Win2003 worked 'out of the box"that makes me think that the Win7 to work also with some small configuration changes somewhere - someone can help point me in the right direction?

  See you soon

  Dan

  If both are NAT, both should have the Internet connection if you have removed the cable, because NAT virtual network connects to each host TCP/IP stack.

  Are you sure? It really sounds like a bridge and the other is NAT. If you unplug the cable from the network status of the guests should not change. If in doubt, post the two guests .vmx files.

  AWo

  VCP 3 & 4

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• Docking station for Satellite L450

  I bought a new laptop satellite L450D - 11 X.

  Does anyone know if there are for these docking stations. So far I have found none.

  your your

  Hello

  How do you anchor the Satellite L450 with a docking station?
  Your Satellite L450 supports a host slot at the start of the unit?
  I don t think so!

  Only a few Portege and Tecra series were equipped with this slot which allows to anchor the device with a docking station

  You can use a Dynadock. This Dynadock can be connected to a USB port
  Google just for Toshiba Dynadock.

• Satellite L450 automatic BIOS update it bricked

  Hiya,

  My wife has a portable Satellite L450 and it has been updated the BIOS through automatic updates of Toshiba, she said yes to it. The update took forever, that's where 'update' for over an hour, then he stopped responding so I had no choice but to draw power and now he refuses to do anything. When I turn it on the power light turns on and light hard drive falters you a bit, but the screen remains black.
  My laptop has bricked by the update of the BIOS via the Toshiba program. It is just out of warranty, but it's 100% fault Toshibas.

  What can I do?

  Thank you
  Steve

  Hello Steve

  Sorry to hear that.
  What you can do? When you first contact the nearest Toshiba provider in your country, explaining the situation and talking with the guys what we can do about it.
  Be cool and don't be arrogant. Many people call the service and scream on the phone. Don t for this. Be cool, trying to explain what happened and ask for help.

  I hope that they will help you and you will be able to use your laptop again.