Satellite L450D-113 - error during the installation of recovery (part 2 of 7)

Similar Questions

• Satellite A80 - 49 error during the installation of recovery code

  Hello

  I have a Toshiba Satellite A80. The computer crashed. I inserted the Windows recovery disc and error #49 with writing problem appeared.

  I wonder what wrong with my laptop. What is a hard drive problem?
  Can someone help me?

  Thank you.

  Hi ClementLo,

  > error #49 with writing problem appeared.
  I put t know when you get exactly this message but theoretically, it might be a problem with the HARD drive. Perhaps he has bad sectors and must be replaced

  Can you also test the same using a disc of Microsoft? Maybe the disc is scratched

• Satellite L450D - 11G - hangs after the installation of recovery

  The recovery disc provided does not work. After you install all the files, it goes into a boot loop with "installing Windows for the first time, through 'Please wait', for flashing to the top of the home screen and then stop and restart.

  Is there any solution for this?

  Hey Buddy,

  You must wait a few minutes. On my laptop Satellite and Windows 7, I had the same problem. Windows will be reinstalled several times until the installation is complete and you will always see the same screen.

  Don t so worry about this. Everything is ok with your laptop! :)

• Satellite L355D-S7825 - hangs during the installation of recovery

  My laptop girls. She asked me to restore the computer to factory settings. It is running Vista Home Premium 32 bit. I tried the restore disks 4 times now to pretty much the same results. It will get all the way to the "application final Configuration where it installs the user manual and the office links and then it's there. After reading several posts here with the same problem, I decided to let it sit all night. This morning it had expired. I clicked on the button of the mouse to wake him up. It passes to the logon screen. It shows login Admin and says that the account has been locked, please contact your system administrator. How can this be? It won't let me! My only choice is to restart the system. After the reboot, it displays the screen of the AFC and reinstalls the two same files manual user and links and then it's there.

  I can minimize the screen of the AFC I did and then I changed the power settings to never expire. I have the WiFi off button as requested by AFC screen, as it will not be installed file links with WiFi turned on and the user manual. I don't know what else to do.

  Anyone has any ideas on this? What would you say if I was totally format the HD and then try to restore? Any help would be appreciated.

  Hi Poppi,

  What you mean with screen AFC?

  Well, if recovery installation doesn't work properly, it s hardware malfunction or the disk recovery...

  You can install Windows from a normal Microsoft drive correctly?

• Satellite A30 - shuts down during the installation of recovery or FDISK

  I have a Satellite A30 and I wanted all off it delete and start from scratch.

  Turned back with disc 1 CD product recovery, started well I was prompted to insert disk 2, it does well to about 80% then erased screen, then got the message "invalid partition table". I tried again and same thing happened. Connected FDISK back and chose option 1. 'create a DOS Partition or logic back drive' and the laptop stops. I put the startup option for no network or HARD drive CD player. At startup without inserted discs, I get the following. PXE - E61 madia tset failure, check cable.
  PXE - m0f: exit PXE ROM then freezes.

  Anyone have any ideas?

  I'm not sure at 100%, but from your description, I think that HARD drive get in trouble.
  How pxe message shows that means laptop can not find device bootable and as last it will boot from LAN.

  If possible, try to get a new HARD drive and check if the recovery procedure completes successfully. Old IDE hard drives are not more expensive. To test you can also use a used purposes, but of course has no HDD vice.

• Try installing SAGE simply accounting error: "Error 1935. An our error during the installation of Assembly component

  Try to install simple SAGE accounting and the following error:

  "Error 1935. An our error during the installation of the Assembly {97F81AF1-0E47-DC99-A01F-C8B39A1E1873} HRESULT 0X80071A91 component. »

  After this error, I also receive this error:

  "Error: 1603 Fatal error during installation." Consult the help of Windows Installer (MSi.chm) or MSDN for more information.

  Anyone out there has any help with these errors?

  TKS!

  Hello

  1. are you able to install other programs?

  2. How are you trying to install?

   

  I suggest to follow the steps provided and check if it helps.

  Method 1:

  Problems installing and uninstalling programs on Windows computers: http://support.microsoft.com/kb/2438651

  Method 2: You can also configure your computer in a clean boot state, and then try to install it.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Hope this information is useful.

• 0xc007001d error during the installation of antivirus software

  0xc007001d error during the installation of antivirus software. AVG is the brand name. Installation stops with error code.

  Help!?

  I suggest that you uninstall and redownload it or switch to another brand or use the built in Microsoft Security Essentials. AVG has a bad reputation for bugginess, false positives.

• Get the error during the installation of the regional coordination unit

  Hello
  I am facing the error during the installation of the RCU below. We gave the user sys and the DDT that works very well DOSPROMPT.the even when I give the configuration during the installation of the remote, I get the below error. Can someone help me with this problem.
  Thanks in advance...
  
  2012-10-02 22:52:58.645 NOTIFICATION rcu: oracle.sysman.assistants.common.dbutil.jdbc.JDBCEngine::connect: the connection to the database: user: sys, role: SYSDBA, connectString: (description = (address = (host = localhost)(protocol=tcp) (port = 1521)) (connect_data = (service_name = ORCL) (server = dedicated)))
  2012-10-02 22:52:58.730 rcu ERROR: oracle.sysman.assistants.rcu.backend.validation.StepValidator::isConnectionStepValidated: unable to connect to database: name of user and password invalid.
  Please enter the name of user and password valid
  2012-10-02 22:52:58.730 rcu ERROR: oracle.sysman.assistants.rcu.backend.validation.StepValidator::isConnectionStepValidated: SQLFatalErrorException:
  oracle.sysman.assistants.common.dbutil.SQLFatalErrorException: name of user and password invalid.
  Please enter the name of user and password valid
  at oracle.sysman.assistants.common.dbutil.jdbc.JDBCEngine.connect(JDBCEngine.java:585)
  at oracle.sysman.assistants.rcu.backend.validation.StepValidator.connectDatabase(StepValidator.java:358)
  at oracle.sysman.assistants.rcu.backend.validation.StepValidator.connectDatabase(StepValidator.java:253)
  at oracle.sysman.assistants.rcu.backend.validation.StepValidator.isConnectionStepValidated(StepValidator.java:1352)
  at oracle.sysman.assistants.rcu.ui.pages.DBConnectionPage.updateModel(DBConnectionPage.java:552)
  at oracle.sysman.assistants.common.wizard.WizardPageExt.wizardValidatePage(WizardPageExt.java:166)
  at oracle.bali.ewt.wizard.WizardPage.processWizardValidateEvent(WizardPage.java:710)
  at oracle.bali.ewt.wizard.WizardPage.validatePage(WizardPage.java:680)
  at oracle.bali.ewt.wizard.BaseWizard.validateSelectedPage(BaseWizard.java:2367)
  at oracle.bali.ewt.wizard.BaseWizard._validatePage(BaseWizard.java:3072)
  at oracle.bali.ewt.wizard.BaseWizard.doNext(BaseWizard.java:2152)
  at oracle.bali.ewt.wizard.dWizard.DWizard.doNext(DWizard.java:405)
  at oracle.sysman.assistants.common.wizard.WizardExt.doNext(WizardExt.java:261)
  to oracle.bali.ewt.wizard.BaseWizard$ Action$ 1.run(BaseWizard.java:3944)
  at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
  at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:641)
  to java.awt.EventQueue.access$ 000 (EventQueue.java:84)
  in java.awt.EventQueue$ 1.run(EventQueue.java:602)
  in java.awt.EventQueue$ 1.run(EventQueue.java:600)
  at java.security.AccessController.doPrivileged (Native Method)
  in java.security.AccessControlContext$ 1.doIntersectionPrivilege(AccessControlContext.java:87)
  at java.awt.EventQueue.dispatchEvent(EventQueue.java:611)
  at oracle.sysman.assistants.common.util.EventPopUp.dispatchEvent(EventPopUp.java:94)
  at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
  at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
  at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
  at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
  at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
  at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)

  3rd error is known, one can ignore it.

  Try it with the user of the system, I thought I told you that.
  This should work.

  Score pls help if

• "The installation process has encountered an error during the installation of the shared technologies."

  Basically, whenever I try to download Adobe Premiere elements 11 on my Windows Vista computer, to halfway through a message appears saying that "the installation process has encountered an error during the installation of the shared technologies. If please restart your system and try again. »

  Whenever I insert the disc, I select the trial version, in case I have download the full version and it allows me to use my serial code.

  Someone said the destination folder could not contain more then 250 characters, then I changed its position of "C:\Program Files\Adobe\" in "C:\". ", but he still came up with the same message!

  I downloaded the new Adobe Reader 10, but this makes no difference to the process... no matter what I tried he always comes up with the same message.

  I also activate my antivirus software during the installation of Adobe Premiere Elements. Again, this is not do the trick. And I restarted my computer and tried to download it and not download more than once!

  Each time the same message comes back, and I have no idea how to fix... Its not my memory challenge which is a problem, because I currently have 50 GB free on my OS C:\ drive.

  I also have QuickTime version 7.6.9, which is apparently necessary?

  If you know something that I have not tried that can work, or the problem causing this and a solution to the problem, please can you let know me, thanks!

  Refer to this:

  Troubleshoot installation | Photoshop Elements, Elements first. Windows

  Mylenium

• During the installation of PhotoShop item 11, "error during the installation of the shared Technologies.

  During the installation of PhotoShop element 11, I get "error during the installation of the shared Technologies. Please restart.

  I'm assuming you restarted your computer once before trying to re - install.

  I think that you have uninstalled all other Adobe applications. Please perform a manual cleanup to be sure that there are no files interfere with installation. Here are the steps:

  http://helpx.Adobe.com/Photoshop-elements/KB/manually-remove-Photoshop-elements-11.html

  If the problem persists, please share the logs from the following locations:

  % temp%\PSEInstall.log, PSE11.log,
  Elemets11OrganizerInstall.log,
  Organizer.log,
  PDApp.log,
  AMT.log
  OOBElib.log
  C:\Program Files\Fichiers Files\Adobe\Installers\<*PSE11*>. log.gz

• During the installation of recovery that it off

  I recently baught a new laptop computer from a friend and I so wanted to restore factory settings. I inserted the disc and went through the adjustment, and he began to restore. At halfway through the process of close to 50% turns off/on overheating. It tells me to insert the disc starts, which I did not, and now I don't know what to do because it does not start without it.

  What can I do and where can Iget a new?

  Please answer ([email protected])

  Thank you!!

  Hello

  I think the solution to this problem is quite easy. If the computer turns off during the installation of recovery you need to do this installation once again, I think that because some files are missing, etc.

  Then boot from the recovery disc and try again.

  By the way: it would be interesting to know which laptop, you have exactly. If it overheat, try to clean it using the jet of compressed air. ;)

• Satellite Pro A10 stops during the installation of Windows

  I have a satellite Pro A10, which stops during the installation of Windows. The installation gets to the part where I need to select the HARD drive to install, then the system off just. I can restart it immediately, and the sdame happens.

  If I enter the BIOS, everything is detected OK, and I've updated to the latest version (V1.4). Also when in the BIOS, the system will remain under tension for ever and a day! and no downtime. I have a couple of diagnostic CD, then run the tests is the same thing, but I ran the seagate diagnostic tool and the HDD OK passes, as does the main map, but cannot perform detailed testing that the system shuts down during the tests.

  I suspect an overheating issue but would like advice.

  Hmmm it s very strange. I thought that the HARD drive could malfunctions but it of very impossible if the HARD drive has passed the Seagate diagnostic test.

  However, it would be very interesting to know if the installation of the OS would end with another HARD drive.
  You know, it of always difficult to provide an exact solution without any diagnostic tests.

  For me, it really looks like a hardware malfunction. So perhaps it would be advisable to contact the authorized Toshiba maintainer for a control of the laptop.
  Guys could run tests and would situate the fault quickly.

• This operation requires an interactive kiosk to Windows - error during the installation of a MICROSOFT WIRED KEYBOARD 600

  Hello

  I get the error "this operation requires an interactive window station" during the installation driver for a new (working) Microsoft Wired Keyboard 600. I tried to disable my Avast! anti-virus program entirely to restart my system in selective mode with only Windows running programs to install the keyboard. None worked.

  The selective mode does not work. And Device Manager shows the device with the yellow triangle icon. With the code 28 error. "This operation requires an interactive window station.

  I'm using Windows Vista Home Premium (32 bit)

  Also the comfort curve keyboard 2000 from Microsoft that was previously used with this system can no longer install into any usb port. It only works in the USB port it was previously installed. IM happy that I can still use this keyboard, otherwise I would be even more crazy. Usually, I am not asking these questions, I'm the guy 'tech' at home, and I tried all possible options. This topic made me rage a little, because: Microsoft Keyboard on a Microsoft Windows computer does not work. I mean, what the hell.

  Sorry for the typo I made, the CCKeyboard2000 Im using now randomly constantly through... it is why he was replaced.

  Paul

  Hi Paul,.

  Please contact the Microsoft Community.

  I'll get to see the steps of troubleshooting from here-

  http://www.Microsoft.com/hardware/en-us/support/troubleshooting

  In addition, I would like to you contact Microsoft Hardware Support for assistance more.

  http://www.Microsoft.com/hardware/en-us/support/contact-us

  We know if you need help.

• BEX errors during the installation of the software/program updates

  I have recently upgraded to an SSD and a new drive hard on my PC and thought, everything was going well until I started to reinstall and update my old programs, where I keep coming across mistakes BEX I can't work around with my computer DEP settings. When I try, I get an error message stating, "this program must run with Data Execution Prevention (DEP) enabled. You can't turn off DEP for this program.

  Is it possible that I can get around this error in order to update my programs, or am I stuck with the ever-growing list programs I can is no longer updated accordingly?

  - - - - - - - - - - - - - - - - - - -

  Signature of the problem:
  Problem event name: BEX
  Application name: whql-radeon-software-crimson-edition-16.1-64bit-win10-win8.1-win
  Application version: 0.0.0.0
  Application timestamp: 54336eaa
  Fault Module name: ltc_game32 - 106568.dll
  Fault Module Version: 1.0.0.1
  Timestamp of Module error: 566 b. 4799
  Exception offset: 000aaf89
  Exception code: c0000417
  Exception data: 00000000
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033
  Additional information 1: 7ba8
  More information 2: 7ba8a4bc43675385b12d0091164f5b9a
  3 more information: 3b 02
  Additional information 4: 3b02768676ca2422774930b07cabbc60

  Signature of the problem:
  Problem event name: BEX
  Name of the application: 1_CyberLink_PowerDirector14_Ultimate_Upgrade_VDE150831 - 02.exe
  Application version: 0.0.0.0
  Application timestamp: 4fd34d75
  Fault Module name: ltc_game32 - 106568.dll
  Fault Module Version: 1.0.0.1
  Timestamp of Module error: 566 b. 4799
  Exception offset: 000aaf89
  Exception code: c0000417
  Exception data: 00000000
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033
  Additional information 1: 7ba8
  More information 2: 7ba8a4bc43675385b12d0091164f5b9a
  3 more information: 3b 02
  Additional information 4: 3b02768676ca2422774930b07cabbc60

  Signature of the problem:
  Problem event name: BEX
  Name of the application: 2_CyberLink_PowerDirector14_ContentPack_Essential_PCP150526 - 06.e
  Application version: 0.0.0.0
  Application timestamp: 4fd34d75
  Fault Module name: ltc_game32 - 106568.dll
  Fault Module Version: 1.0.0.1
  Timestamp of Module error: 566 b. 4799
  Exception offset: 000aaf89
  Exception code: c0000417
  Exception data: 00000000
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033
  Additional information 1: 7ba8
  More information 2: 7ba8a4bc43675385b12d0091164f5b9a
  3 more information: 3b 02
  Additional information 4: 3b02768676ca2422774930b07cabbc60

  Hello

  Thanks for posting your query to the Microsoft forum. I will definitely help you with this.

  I understand that you have problems during the installation of the software. This problem is possibly due to several reasons such as security software that can be installed on the computer, any program or application that is running on the computer on the bottom, or due to some errors on the hard drive of the computer.

  Method 1: Run the clean boot

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot

  How to perform a clean boot in Windows

  Note: See "How to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  Method 2:

  Please see the advice given in the link given by Shinmila: 28 March 2010:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-gaming/cannot-disable-DEP-for-certain-programs/d5352d1e-11AC-4254-ad3f-c0ecb85311f0

  Let us know if you need more assistance. We will be happy to help you.

  _________________

  Thank you best regards &,.

  Isha Soni

• Error 1935. error during the installation of Assembly--how to fix?

  Hello

  Recently, I lost my laptop (a Lenovo X201t Win Ultimate running any Bluetooth capabilities (64-bit).) The problem started when Windows Update offered me an option "Bluetooth with Enhanced Data rate software II v6.2.1.3100 (7ZBV19WW)" upgrade. This update of first removed the existing Bluetooth SW and then started to install the new version. Towards the end of the installation (i.e. when the progress bar has reached almost 100%) all of a sudden the next popup appeared:

  -----------------------------------------------
  Error 1935.An error occurred during the installation of assembly 'policy.8.0.Microsoft.VC80.ATL, type = 'win32-policy', version = '8.0.50727.42", publicKeyToken ="1fc8b3b9a1e18e3b", processorArchitecture ="amd64"'.

  See Help and Support for more information. HRESULT: 0X800736FD. assembly interface: returned IAssemblyCacheItem, function: commit, component: {51B6FD4C-6551-1104-A01F-C8B3B9A1E18E}
  -----------------------------------------------

  I googled around fragments of the above error message, but appearently it signals a significant problem. Some discussions I've found comes to the conclusion, that some registry entries do not have the correct permissions, in most of the other discussion gave, had something that was wrong with the subsystem that some libraries .NET and .NET (most listed some "MS Visual C++ 200 x Redistributable" as guilty) were opposed or had been corupted or put in an inconsistent state.

  I tried various tips in these discussions, but nothing has worked so far, so I ask here:

  • What really does this error mean?
  • Can we deduct sort of info in the above message, what to do or where to look for?
  • How can I locate or identify the library or component (or other) that is the cause, so that I can try it in- or reinstall first we hope to solve this problem?

  I really need my bluetooth capability! I use it regularly to synchronize with my cell phone and listen to music and I can't wait these two functions no longer work!

  Michael

  PS. : in case this requires some "open heart surgery" on the system: I'm comfortable with all kinds of windows of Mgmt. Tools, edit the registry, etc etc - so no problem! I also took a recent disk image (alas, taken only after the error appeared), so still some changes difficult to solve this problem would be fine with me...

  Hello

  If you receive a 1935 error when you try to install the software, the Windows file system transaction log is corrupted. The transaction log is used by the Windows file system to recover when a file error occurs. It can also occur if an error occurs with the installation of .net Framework.

  Step 1: To correct this install error, you must clear the log.

  a. open an administrator command prompt: right click on start > all programs > Accessories > command prompt and select "run as administrator" and click "allow" for the elevation prompt

  b. in the command prompt, type the following command:

  true fsutil resource setautoreset C:\

  c. which assumes that C: is the drive where Windows 7 is installed. If it is installed on another drive as D: Please change the appropriate drive letter.

  d. restart the system.

  e. install the software and check.

  Step 2: Start the Trustedinstaller Service. It is possible that the Trustedinstaller service do not appear in the service list. If you must change the registry value to 'active' in the system registry.

  To do this, you must:

  a. type "regedit" without the quotation marks in the start search box.

  b. in the Registry Editor window, navigate to HKEY_LOCAL_MACHINE > SYSTEM > CurrentControlSet > control.

  c. in the "Registry Editor" dialog box, double-click on 'RegistrySizeLimit'. This opens the "Edit DWORD value"dialog box.

  d. in dialog box "Edit DWORD value", enter ffffffff as the 'hexadecimal " value." Click on the "Decimal" radio button and enter 4294967295 value 'Decimal' . Click OK.

  e. restart the computer.

  f. log as long as administrator, open an command prompt and type SFC/scannow.

  Once the process is complete, reinstall the program that challenges you to install.

  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link:

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Step 3: Repair of .net framework and check.

  Repair the installation of Microsoft .NET Framework

  To do this, follow these steps:

  a. Click Start, click Control Panel and then click on Add / Remove programs.

  b. in the list currently installed programs, click Microsoft .NET Framework and then click Change/Remove.

  c. click on repair, and then click Next.