Satellite L450D - 11G - no internet connection after reinstalling Win 7

I just installed win 7 pro 64-bit so I can increase the RAM up.
Initially I had win 7 Home premium SP1.

I have a Toshiba satellite L450D - 11G PSLY5E.
I downloaded all the drivers from Toshiba on a memory stick from a source different and then installed on the Toshiba.

Then, I opened all the drivers one by one and ran each driver individually.
In Device manager there is a yellow exclamation next to the network controller.

I have a home network setup that I can connect to the net using phones, tablets and other portable computers.
The icon on the laptop says NO CONNECTION, NOT of CONNECTIONS AVAILABLE.

Y at - it a special order to install the drivers. I have install in the order in which they were downloaded.

Any ideas anyone. TA

In Device manager there is a yellow exclamation next to the network controller.

Probably the essential WLan/LAN drivers are not installed properly.
Do you have problems with the internet connection using WLAN and LAN?

I recommend you to check if the correct drivers have been installed.

The wireless network card should be Realtek RTL8191SE 802.11bgn

Built in LAN module is published also by Realtek...

so in both cases you need a Realtek drivers

Tags: Toshiba

Similar Questions

  • Can't use right click Satellite L450D - 11G

    Hello

    I have a new Toshiba Satellite L450D - 11G with Windows 7. A few days ago the right click button no longer works and I think it could be related to viruses. When I turn on the laptop the left button, that's what should be the right button until I have bring up the Task Manager, then the left button works normally but law does not work. I tried to restore to the factory settings, but it did nothing.

    Any advice would be much appreciated. Thank you.

    Hello

    Check please the mouse properties. There you can set button right action. Check it please, what is defined and ensure that it is a secondary click (context Menu, drag special).

    Please send comments.

  • Satellite L450D - 11G - does not start and do not know how to restore

    Hi guys,.

    I have a satellite l450d - 11g on windows 7 32 bit.
    When I start it, it comes up with a message saying that I need to restore due to a file named: /windows\system32\drivers/msisadrv.sys is missing or corrupt and to insert my disc.

    Well I don't have a disc or anything like that with my computer and ive tried everything.

    Can someone help me atall? I'll be willing to pay, just to get my laptop to the top and runninng again.
    Press f8 and '0' method did not work either.

    Thank you.

    > The f8 and '0' method did not work either.

    Usually, HARD drive recovery option should be available by pressing F8 at the beginning of the startup procedure.
    Then an Advanced Start menu should appear where you could choose fix my computer-> drive HARD recovery

    If this is not possible, then you will need to retrieve the laptop using the Toshiba recovery disc.
    The disk can be ordered here:
    http://backupmedia.Toshiba.EU/landing.aspx

    Good luck

  • Re: Satellite L450D - 11G - I accidentally deleted driver mic

    I accidentally deleted my microphone driver, always having his good, please help.
    I need to download a new driver?

    What is your laptop?
    http://www.Toshiba.co.UK/discontinued-products/satellite-L450D-11g/

    What's exactly wrong with the laptop?
    I m asking because you said remove you micro driver.

    First of all there is no such driver.
    Audio driver controls the microphone.

    But you said that the sound is still working so I m a bit confused.

  • The inverter for my Satellite L450D - 11G replacement screen

    I think that I need a replacement screen inverter for my Satellite L450D - 11G.

    Site Web de Toshiba send back me to Dixons / PCWorld and Currys digital for repair.

    Toshiba have a Service Centre in the South East of England where I can get it fixed?

    I prefer to deal directly with Toshiab if possible.

    Thanks in advance for any response.

    > Toshiba have a Service Centre in the South East of England where I can get it fixed?

    Here you can find the database with all Toshiba ASP worldwide:
    http://EU.computers.Toshiba-Europe.com/-> support download &-> find an authorized service provider

  • How to get wifi connection after reinstalling factory default DVD for Iconia W3-810?

    My W3-810 Iconia has been reset using Acer Recovery DVD. After that 8 window has been restarted, he not been able to find the wireless device.

    Does anyone know how to get a wifi connection after reinstalling factory default DVD?

    Best is to download the drivers for a different machine, then transfer to the W3 with a USB or SD card. Once they are installed included you be back running.

  • I lost the internet connection after acceptance of your latest updates. How can I cancel the updates?

    I lost the internet connection after acceptance of your latest updates. How can I cancel the updates?

    Debbie

    How do you know that the loss of your internet connection has nothing to do with the Windows updates? You must find the reason for the loss of the connection.

    How do you connect? Is a wired or wireless with a modem or a router? If a router is the router shared with another computer and this computer can connect to the internet? You need to determine if the problem is a fault on your computer or a failure to connect to your internet access provider?

    What error messages are reported?

    Event Viewer reports

    1. normally, when an error occurs on your computer looking in Event Viewer should be your starting point to find a solution. More related system errors are recorded and get an exact copy of the relevant report is important. Unfortunately, is not easy to understand reports and most of the users computer need help with their interpretation. I have to say later interpretation.

    2 Event Viewer includes three main newspapers of Windows. Here's the Application, security, and system. For purposes of troubleshooting system is by far the most important.

    3. to access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, right click and select filter current log. Check the front of the error and click OK and see you only reports errors. Click the Date and time column header to sort. You may need to click a second time to see the last report above.

    4. a tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. Select the Details tab and check the box in front of the XML view. Click the copy button to place a copy in the Clipboard and close Event Viewer. Now start your message and paste it into the body of the message. Make sure that it is the first dough right out of the event viewer.

    5. He cautioned against three types of reports, information, and reports errors. In most situations, it is the error reports that offer the best information but sometimes WARNING reports provide useful clues.

    6. all reports have stamps date and hour and when troubleshooting, it is important to focus on the latest reports. Reports of studies from the point when the computer is started, and then check if a similar report appeared in the previous session. If errors do not repeat investigation as to why they happen is wasted effort.

    7. in the individual reports the most important information is the event ID and Source such as these help when looking for help on the internet. The description is just as important and copy the exact text to use as search criteria greatly helps achieve better results when using Google. Not paraphrase descriptions when other people asking for help.

  • Vista 32 bit loses the internet connection after about 10-15 minutes.

    I lose my internet connection after 10-15 minutes.

    The message says local access only.

    The only way to reconnect is to restart the computer.

    I use a devolo home plug network system. It is connected to a 210 of BT router travel.

    I also have a new computer recently bought and installed Windows 7. There is no problem with that.

    Maybe it's a coincidence, but the problem started only since the installation of the new model.


    Hello Cody C.

    Thanks for your reply. I tried this. It is said that the drivers are up to date.

    I go into the settings of power network and checked the box "turn off network card to save energy.

    Since that seems to be OK. Only time will tell if.

    Thanks a lot for all the replies. EXTED

  • Satellite C660 - no Internet connection after updating BIOS

    I am a novice user and have a Satellite C660 under warranty that I don't use for surfing the net and Ebay so I hope I can explain my problem!

    Toshiba bulletin board said that the need to update BIOS, so I followed the instructions but since then I have no internet connection, and cannot restore the connection that I lost all help Toshiba Bulletin Board today lost and none of the programs to sort the problems work - e.g.set assistants etc. I did not yet create rescue disks, but if I try to create them now I'll be able to restore to factory settings?

    Can someone tell me if it's a failure caused by the BIOS update or I would return laptop to John Lewis for repair? Thank you very much for reading this

    Hey Buddy,

    The default settings in the BIOS load after update? If this is not the case, go into the BIOS and load the default settings. You can enter the BIOS if you press F2 before Windows start and then press the F9 key to load defaults. Then save & exit the BIOS Setup.

    You can access the Internet now?
    You try to access the Internet with LAN or WLAN connection?

    Also check device manager if all devices are recognized correctly.

    > I did not yet create rescue disks, but if I try to create them now I'll be able to restore to factory settings?
    You can create the Toshiba Recovery disk every time. Just launch the pre-installed Toshiba Recovery Media Creator and follow the instructions on the screen. You need just a few blank DVDs to create the discs. Disks contain a factory image of settings which can be restored each time and how many times you want to so with these disks, you are on the safe side ;)

  • Satellite L450D-128 - Wireless internet does not connect

    Hello

    I have a Toshiba Satellite L450D-128 and it won't let me connect to a wireless network and I can't find the switch wireless and ive tried FN + F8, but it does not work. Could you please help.

    Thank you Ryan

    Hello Ryan

    I don't know what version of Win7 do you use and what can be the problem of using WLAN but if you use original recovery image, everything should work properly.

    At first check please if the wireless network card is installed correctly. You can check in the Device Manager.
    If the wireless network adapter is installed correctly, it must be enabled. Usually, this can be done by using the FN + F8 key combination.
    >.. .and ive tried FN + F8, but it does not work
    What does not work exactly? You have problem with the FN keys in general or just using FN + F8?

    When you press the FN key you find cards flash at the top of the screen?

  • Satellite L450D-11V - no wireless connection more

    Purchased by Satellite L450D-11V for daughter for Christmas, everything is okay until last Sunday, would not connect internet wireless via the hub. Work of hub thin like the pc works, laptop works also via a LAN cable. Wireless led flashes on then off turning the power on. Been told to check his dial-up, but there is no physical switch.

    Any help will be appreciated as im not spirit from any computer!

    Thank you

    Hello

    There is no material on Satellite L450D switch but if you press FN + F9 you can toggle the WIFI connection.
    Check this box!

    If it doesn't work check your device manager is the wireless network card correctly list?
    You can also try to update the WLAN driver

  • Difficulty of internet connection after Security Tool Virus

    My mothers computer caught the security tool virus.  I finally had to reload Windows XP and Windows XP now works, but I can't connect wirelessly to the internet.  She got ahead through Linksys.  When I look under the modem it says connection cable to cable.  I'm assuming I erased the other information that I need to connect on the internet.  Any help will be appreciated.

    Here are some ideas of the fallout that occurs in your Internet settings after some infections have been deleted and how set things straight.

    Depending on how you removed the infection (the removal procedure is well documented), sometimes there are a few other things to do later.

    Some malware knows that you will try to get in the Internet to try to find a hair removal method if it adjusts things on your system to prevent you to do so.  Even if you delete the malware using several analytical tools, tools cannot tell if the Internet settings have been modified by malicious software or put you that on purpose so he leaves the only parameters (and your system cannot connect).

    The malware hope that you will not be able to understand these things and give up and just reinstall your XP, do an install repair or by using a Restore Point.  Sometimes it breaks these things too, but you can usually remedy without the use of one of these methds (which aren't really patches at all)...

    If you have reinstalled XP, this may not apply to your situation, but it would be a good start:

    We will check your network connection properties.

    Some malware will alter these settings and your anti malware software can't tell if you have changed the malware changed them or so, after removal of infections, it will leave just the settings as he finds them (it is usually a good thing), but can leave your disabled Internet access.
     
    Click Start, run and enter in the box:

    Inetcpl.cpl

    Click OK to launch the Internet Properties Control Panel, choose connections, LAN settings.

    Or, in Internet Explorer click on tools, Options, connections, LAN settings.

    These settings control your Internet access for all browsers.

    On most environments, not independent, there will be check automatically detect settings and the other boxes are (as Proxy Server) is disabled.

    Automatically detect the setting checked =
    Use the automatic configuration script = unchecked
    Use a proxy server for your LAN = not checked

    Make changes, then click OK, OK to save the settings.

    Check your settings for how your network adapter gets its IP and DNS settings.  On most home systems, these parameters must be defined for the system will get the settings automatically.

    If you have another system on your network that works, you can compare these settings with the settings of the system which is not a work and make adjustments.

    Click Start, settings, Control Panel, network connections, and then select your current network connection.

    On the general tab, click Properties.

    In the drop down in the Middle, find and highlight the selection of Internet Protocol (TCP/IP) and click Properties.

    In the Internet Protocol Properties window, the usual selections are to get the IP and DNS settings automatically.  Select the following two options:

    Obtain an IP address automatically

    Get a DNS server address automatically

    The rest of the options on the screen should then be grayed out/not available.

    Make changes, then click OK, OK to save the settings.

    Restart your computer and test your connection.

    If it still does not work, check your settings are still in place after a restart and then release and renewal IP of your network device configuration settings.

    Click Start, run and enter in the box:

    cmd

    Click OK to open a command prompt window, and then type the following commands:

    ipconfig/release
    ipconfig / renew
    output

    Restart your computer and test your connection.

    If this does not work, follow these steps:

    Please provide additional information on your system:

    What is your system brand and model?

    What is your Version of XP and the Service Pack?

    Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

    Click Start, run and enter in the box:

    Msinfo32

    Click on OK and when the system info summary appears, click on Edition, select all, copy, and then paste the information here.

    There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.

    This will minimize back Q & A and eliminate guesswork.

    Do, or do not. There is no test.

    I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

  • Lose Internet connection after sleep/standby/hibernation Mode

    I recently bought a new HP Pavilion Elite e9105z CTO Office and migrated from Win XP to Vista Home Premium x 64, with a NVIDIA nForce 10/100 Mbps Ethernet Controller.  Whenever I come off standby or standby mode, I lose my Internet connection and have to restart my system or run Windows Network Diagnostics to repair the network adapter settings.

    I tried several remedies available on Internet; but unfortunately, nothing has resulted in a permanent solution.  I contacted my service provider ISP (Mediacom) wonder if it was / is a problem with the firmware used to my cable modem SBV5220 support (for example, incompatibility with Vista) and they said there is no.  So far, I have:

    1. Reinstalled NIC driver.
    2. Power options controlled and reset with USB CDC.
    3. Apply the update for Windows Vista (default gateway setting is lost) for x 64 systems (KB933872) - response that update does not apply to the system.
    4. Reset the IP configuration via the Cmd line.
    5. Tab power, unchecked the box that shuts down the adapter then power save comes into play.

    Access the computer several times a day and having to reset Internet connections became extremely aggravating.  I hope there is a solution.  Thanks in advance for your help.

    Back from a 3 week stay, during which my office has been extinguished, my local internet connection would come is no longer active when he came out of hibernation.  The without line worked, but the local connection would not work unless physically, I unplugged the cable from the router (Netgear) and reinserted it.

    After several days of frustration, I went into the Manager of devices, unchecked ethernet optional adapter "allow the computer to turn off this device."
    This seems to have cleared up the problem, at least until now...
  • Apps to say no internet connection after 9.3

    After the upgrade to 9.3 different applications like hay day and yahoo weather, say I have no internet connection, but the internet is fine. My daughters works very well and does not say that, and we are on the same internet connection. It's never happened before. I was wondering if anyone else knows it after the upgrade or just me? Is there a solution? I know that's not my internet. I'm on an iPad 3

    Tap settings > general > reset > reset network settings

    You will need to re enter your Wi - Fi password.

    Then see if these apps work as it should.

    Sometimes, the network settings on an iOS device can be damaged during a update.

    If this does not help, delete the apps that are no internet connection then re download from the App Store.

  • Satellite A300-146 - any internet connection freezes

    Hello world

    I have a problem. When I connect to the internet after about 10-20 minutes, I am unable to work with the browser. When I tried to use the ping command, everything was OK. But the browser don't refresh not all web pages, don't open new pages etc. BUT download works OK.

    I tried: the 3G (mobile phone) connection via an Express card, LAN and WLAN connection. Always the same.

    I tried: IE included in my OS, Firefox, Google Chrome, Opera. Always the same.

    Sometimes the connection icon shows that the zone of confidence is available. When I double click the icon and try to find the problem, the problem (after 10 seconds) is fixed by himself, BUT the browser still has these problems (written above). And if I close the browser (I can close regularly) and try to open it again, I can't open it (it is said that it already works, but does not, I can't remove it process).

    Sing the Vista Home premium (preinstalled).
    Any help?
    Thank you!

    Hello

    Do you mean that the internet connection freezes or the internet browser has no answer?

    According to your post, it seems that the browser wouldn't answer.

    You update the Vista?
    Do this!

Maybe you are looking for