Satellite L450D-128: how to fix intermittent errors blue screen Crash?

Similar Questions

• How can I fix stop error (blue screen) occurs whenever I try to open a link of U-Tube? I am running Windows XP.

  Whenever I receive an email containing a link to U-Tube, or try to connect to a position of U-Tube by link via my browser, it starts to open up and then freezes. The computer shuts down after briefly showing a blue error screen.

  This happens if the browser is IE, Firefox, Google, or Google Chrome.
  I tried the system restore, but it will not go to any control point before this event began, about four weeks ago.
  I also tried Mats_Run.Codec.exe, MS Automated Troubleshooting service, nothing helps.

  You would get further faster and with less effort, if we know a little more about your system and you can eliminate the 'try' things.

  What is your system brand and model?

  What is your version of XP and the Service Pack?

  You will always be to 'catch' the BSOD if you do this:

  XP is configured to restart automatically on some system failures, you will need to disable this feature for the information of the blue screen of death (BSOD) will remain on the screen for you to see.

  You must also configure XP to create a memory for each BSOD dump file, so you'll have a crash dump file to watch later if debugging more is necessary.

  If your system crashes later, the information you need will always be on the screen and then you can use the information in the dump files memory to understand what the problem is and fix it.

  Disable automatic restart in case of system error

  XP restarts on system failure, so automatically configure your system so it does not, then you can see the error message.

  Configure your system does not automatically restart on system failure

  Right click my computer, properties, advanced, startup and recovery settings.

  In the system failure section:

  Put a check mark in the box "write an event to the system log.
  Put a check mark in the box "send an administrative alert.
  Uncheck 'automatically restart '.

  In the Write debugging information section select:

  Partial dump (64 KB)

  Set the directory small dumpster:

  %SystemRoot%\Minidump

  Click OK, OK.

  Restart your computer.

  The next time your system crashes, provide more information on what you see.

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  If there is a name of the file listed in the STOP message, don't forget to include this information too.

  Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.

  This sounds like a video driver issue, so we can see what you have for your system, audio and video drivers.

  If you need help to know what your video driver and audio situation, and where to get possible improvements to your video and sound drivers, follow these steps:

  Click Start, run and enter in the box:

  Msinfo32

  Click on OK and when the system info summary appears, click on Edition, select all, copy, and then paste the information here.

  For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information here.

  For more audio information, expand components, click on Sound Device, click on edit, select all, copy and then paste the information here.

  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.

  This will minimize back Q & A and eliminate guesswork.

  If you want to get more information on your BSOD, follow these steps:

  Download BlueScreenView here:
  http://www.NirSoft.NET/utils/blue_screen_view.html
  Unzip it and run it (BSV installs nothing) and let him complete the digitization of all your crash dump files.
  If you double-click on depressed, you will get information on it (including the field caused by the driver) and you should be able to spot the problem right away - especially if you see a model in landfills where Caused by field pilot is the same (beginning with this driver).
  BlueScreenView tries to find the right driver or module that caused the blue screen by looking inside the stack of the accident. However, be aware that the driver detection mechanism is not 100% reliable, and you should also look in the lower pane, that display all drivers/modules found in the stack.
  Select (highlight) one or more of the most recent dump files by clicking on them and hold down the CTRL key to select multiple files.  Try to select only the most recent links that relate to your problem (perhaps five or six to start dump files).
  Click on file, save selected items and save information from the dumps to a text file on your desktop called BSOD.txt.  Open BSOD.txt with a text editor, copy the text and paste it in your next reply.
  Here's an example of report ASB to a single BSOD I initiated on purpose that indicates the cause of the accident as the pilot i8042prt.sys belonging to Microsoft Corporation:
  ==================================================
  Dump file: Mini062110 - 01.dmp
  Crash time: 21/06/2010-11:51:31
  Bug Check String: MANUALLY_INITIATED_CRASH
  Bug check code: 0x000000e2
  Parameter 1: 0x00000000
  Parameter 2: 0x00000000
  Parameter 3: 0x00000000
  Parameter 4: 0x00000000
  Caused by the driver: i8042prt.sys
  Caused by the address: i8042prt.sys + 27fb
  Description of the file: i8042 Port driver
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 5.1.2600.5512 (xpsp.080413 - 2108)
  Processor: 32-bit
  Computer name:
  Full path: C:\WINDOWS\minidump\Mini062110-01.dmp
  ==================================================
  Send the information of the last 5 memory dumps (if you don't have 5 memory dumps yet, send the newest, you have).

• Satellite Pro M50: ATI Radeon Mobility 200 - error blue screen

  Hello

  My girlfriend has a Satellite Pro M50, she bought 3 weeks ago about, recently it started to freeze so that in general use (play music, browse the web via wifi etc.) and then it blue screens. The blue display lights only for a split second before disappearing and the reboot of the machine.

  Once he started again I send the error report to Microsoft and it lets me know that he could have the ATI drivers, I went to the website of ati to search for drivers, but for some reason any, that there is none for the mobility of 200 m, I used the drivers from the toshiba to the opposite site and this seemed to solve the problem for a short time , but it's happening now once again, is this a hardware problem or software and what should I do?

  any ideas anyone (specification of machine below)?

  Toshiba Satellite Pro M50
  Intel Celeron 1.5 ghz
  512 MB of RAM
  40 GB HARD drive
  ATI Mobility Radeon 200 m graphics card
  Win XP Home Ed

  see you soon

  Rich

  Hello

  The blue screen occurs due to the failure of the serious software or hardware failure. You the case looks like a hardware problem. As John said in the first response, it could be the graphics card or something similar.
  You guarantee is valid and I really recommend to contact the Toshiba authorized service partner in your country for the control of the machine.
  If replacements are needed this should be done for free because of the valid guarantee.

• How to fix the BSOD (blue screen of death) on windows 8 cause of tcpip.sys

  I bought a Hp Pavilion h8 - 1360t last year in 2012. He had Windows 7 installed on it, but I have upgraded to Windows 8 pro X 64 some time earlier this year. At first, everything was going well until I kept getting BSOD every few hours or so at random. The BSOD said that tcpip.sys driver_irql_not_less_or_equal. As a first step, I try to understand me and only probably caused by: (tcpip + 65 95 d) tcpip.sys with the debugger tool can someone help me or tell me what it is.

  Here's my dmp. files https://skydrive.live.com/?cid=222e0c932735b73d&id=222E0C932735B73D%21256 

  WP

  Often of tcpip.sys errors are caused by the application of malicious programs installed (in your case AVG).  I delete AVG and use the built in Defender (at least for testing)

  If you continue to crash after removing AVG download DMP files and we can get more aggressive with them.

• How to get photos and videos from mobile phone Satellite L450D-128

  Hello

  I have a series of Satellite/Satellite L450D/Satellite L450D-128 and I'm a bit thick, I also have a samsung 5600 that I want to get the photos/videos-I tried to connect my phonebut he could not connect the driver and seemed to have a lot of problems.

  I thought maybe I could bluetooth of my phone to my lap top but don't think that it has blue tooth? Does? and if she can't?

  Hello

  I Don t know exactly if this laptop has bluetooth.
  In any case, you can buy a "USB Bluetooth adapter" (PA3710E-1BTM). It costs about 10-.
  It will be recognized to the BONE and you don t need any other drivers.

  Best regards

• Satellite L450D-128 stops responding after about 2 minutes in Normal Mode

  Hello

  I just got a new Satellite L450D-128 running Windows 7.
  Whenever I run Windows in normal mode, all and stops responding for about 2 minutes after that the office and I have to manually turn off the laptop.

  When I run Windows in safe mode, it seems to work ok, but I prefer not having to use safe mode indefinitely.

  Anyone know how I might be able to solve this problem?

  Thanks in advance.

  Hello

  First try to retrieve the device.
  It's not difficult, and the whole process won't take long.

  Turn the unit on and press F8
  Then choose fix my computer-> Toshiba HDD recovery

  This will start the installation of the new.

  I think that this is necessary in order to check if this problem is not related to software compatibility issues

  If the question will always be present while we should follow the investigation
  I mean, in this case, that a hardware problem would be possible

• How to fix the error with the code: 0xe7210001 failed to load powrprof, object: cls

  Hello

  Dose anyone know how to fix the error with the code: 0xe7210001, message: unable to load powrprof, object: CLSD-no-it is found;
  OR: Fingerprintsoftware OR error: replicas THotkey.exe message window and the computer freezes

  Maleware scanned and virus, also in safe mode, found no infection, reinstalled driver fingerprint, but nothing has changed.

  grateful for the help!

  Hello

  > message: unable to load powrprof, object: CLSD-no-it is found;
  In my view, this would mean that there is a problem with Toshiba Power Saver
  What laptop Toshiba, you have exactly?

  Maybe reinstall Power Saver could help. You can find it on the official website of Toshiba.

• Satellite L450D-128 - Wireless internet does not connect

  Hello

  I have a Toshiba Satellite L450D-128 and it won't let me connect to a wireless network and I can't find the switch wireless and ive tried FN + F8, but it does not work. Could you please help.

  Thank you Ryan

  Hello Ryan

  I don't know what version of Win7 do you use and what can be the problem of using WLAN but if you use original recovery image, everything should work properly.

  At first check please if the wireless network card is installed correctly. You can check in the Device Manager.
  If the wireless network adapter is installed correctly, it must be enabled. Usually, this can be done by using the FN + F8 key combination.
  >.. .and ive tried FN + F8, but it does not work
  What does not work exactly? You have problem with the FN keys in general or just using FN + F8?

  When you press the FN key you find cards flash at the top of the screen?

• How to fix 8024200d error code in vista ultimate sp1

  How to fix 8024200d error code in vista ultimate sp1

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates:
  http://support.Microsoft.com/kb/836941

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• How to fix this error "generic host process for win32 services has encountered a problem and needs to close ' help me please I am using windows xp with SP3

  How to fix this error "generic host process for win32 services has encountered a problem and needs to close ' help me please I am using windows xp with SP3.

  When I close this error or click on send or do not send, my session network remote also network mapped drive United Nations accessible then I restart my computer and I can access my network grows but after awhile once again this error and the same network behavior that I discussed earlier.
  someone has a better solution that take care of this problem.

  Hello

  Given that the problem is related to the server of the IRIS, IRIS Contact support for assistance:

  http://www.IRISLink.com/C2-1967-189/I-R-I-S---technical-support.aspx

  Hope the above information is helpful.

• Someone knows how to fix C015001A error code?

  Someone knows how to fix C015001A error code? I can't update my computer. It said that windows has not can check the updates. I clicked the windows update in the start menu. It does not work. I'm already the administrator.

  Hello

  Did you change your computer?

  Method 1:

  I suggest you to follow the links and check out them.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2:

  I also suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Registry errors. System hangs. How to fix registry errors?

  How to fix registry errors? The registry errors affect the performance of the pc?
  My windows crashes often. Bases of installed microsoft security update.

  Hello

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes, and displays the information about all crashes in one table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  This utility can be used to check the event log for errors other than a BSOD, many crash
  Events will write to the event log.

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second
  or so from the time of the BSOD for more information on the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that appears
  details of all application crashes occurred in your system. The information breaks down
  is extracted from the .wer files created by the component of Windows Error Reporting (WER)
  the operating system every time that an accident occurred. AppCrashView also allows for the
  easily check the list of accidents to the text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  ==================================================================

  These methods can help correct most of the problems of crash.

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

• How to fix the error of loading mscoreei.dll files?

  I get a message error "C:\Windows\Microsoft.Net\Framework64\v4.030319\mscoreei.dll could not be loaded."

  Please let me know how to fix this error?

  Hello

  Thanks for posting your question in the Microsoft Community forums.

  I see that you have found an error that c:\Windows\Microsoft.NET\Framework64\v4.030319\mscoreei.dll could not be loaded. "

  It seems that the problem is related to the .net framework.

  When exactly do you get this error?

  Try these steps and check if the problem reappears.

  Method 1:

  Step 1:

  Check if this occurs in safe mode

  Some options, including the mode safe mode, start Windows in a limited State, where only the essential is started. If a problem doesn't reappear when you start in safe mode, you can eliminate the default settings and basic device drivers and services as a possible cause.

  Follow this link to start your computer in safe mode with network below.
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2:

  If it works fine in safe mode, please perform a clean boot to verify if any third-party application is causing the problem.

  Please visit the following link to do the same thing:

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 3 of the article mentioned above.

  Method 2:

  You can still run a SFC scan.

  The System File Checker (SFC) utility allows administrators to perform an analysis of all protected resources to make sure they are the correct version. Whether SFC should find all incorrect versions in one of these protected resources, SFC will be replaced by the correct versions.

  To run a scan suite SFC as follows:

  How to use the System File Checker (SFC) to search system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:

  Download the tool to repair of Microsoft .NET Framework from the following link and try it on your computer.

  This tool detects and tries to repair some problems frequently with the installer where with updates of Microsoft .NET Framework.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30135

  Let know us the results of the suggested steps and let us know if you encounter problems with Windows and we will be happy to help you

• How to fix 0xc000001d error

  How to fix 0xc000001d error

  Hi Gustavo,

  It was a problem in the old version of AE with the AMD processor.

  But the fix is now available, just update to the latest AE.

  Kind regards

  Navdeep Pandey

• Bad job first elements 10.0. I made a flash animation and has decided to add sound in first - Elements.It turned jerks. How to fix this error

  Bad job first elements 10.0. I made a flash animation and has decided to add sound in first - Elements.It turned jerks. How to fix this error

  Dear Sirs. I ask you to give special attention that the frame rate vidio input and output cannot exclude more than 1 frame, otherwise the image will shake and blurry text. It is preferable to use the HD 720 P 25 sincerely Mikhail Osipov