Satellite L450D - 13G - problem starting Windows 8 to 8.1

Model: Satellite L450D - 13G

I just ugraded to 8.1 Windows of Windows 8 and now at the start of desktop support and refreshing continues, so I can't do anything.

As far as I can see, is that the file system keeps from (explorer.exe).

Someone at - he experienced this? Any help would be much appreciated as I can see no way that to restore it to Windows 7 with my Toshiba recovery disc.

Fortunately someone Toshiba reads these forums and has an answer.

Hello

First you need to know that win 8.1 on this Satellite L450D series isn't officially supported, and that means this laptop of the manufacturer does not guarantee that these BONES would work properly.

However, I put t see serious reasons why 8.1 Win should not work properly.
In my opinion, something was wrong during the upgrade. To resolve this issue, you must repair the system.

Press the power button on the point 8.1 of Windows (via charms bar) and hold down the SHIFT key when you click on the button to restart. Then the next screen should appear and you may choose to solve the problems.
In advanced options, you can try some options such as auto repair, System Restore, and others

Tags: Toshiba

Similar Questions

  • My Satellite L450D - 13G is not initialize

    I have a Satellite L450D - 13G which was working fine last night. When I started upwards tonight only the power light turns on, no HDD LED of start flashing. I would be grateful for any advice as to what may be the problem.

    Thank you
    Ian

    Disconnect the power adapter and remove the battery.
    Then press a hold power button 30-50 dry long... you can repeat the procedure by pressing and holding the button power 3 - 4 times.

    If this does not help, well, in this case, you have a serious problem, but I can't say for sure what part could be affected in the worst case the motherboard... in better case only a RAM module.

  • Satellite L450D does not start

    My satellite L450D won't start. He stopped and when I walk back, he back the start menu, if I select the repair, it's just a black screen. If I choose start as usual, it goes to the windows logo but it remains stuck. I also tried to start in safe mode, but it says loading files and stays stuck.

    I tried pressing 0 on start up and it does not work and I also tried the recovery disk and it does not work.
    Any ideas would be appreciated
    Thank you

    > I tried pressing 0 on start up and it does not work and I also tried the recovery disk and it does not work.
    If you have a laptop model European 0 initially upwards will help any. You must use F8 at startup to display the advanced startup options. Is the option repair my computer available?

    Anyway, OS is probably screwed and new installation OS can help. Enter the BIOS and set it to default settings. According to redo this cell phone start and press F12 to get into the boot menu. When the boot menu appears on the screen, place the recovery in the optical disc drive disk, choose the CD/DVD device from the menu and press ENTER. This will force ODD to start the reading recovery disk.

    Let us know if it works for you.

  • Error there is a problem starting windows C:\windows\system32\spool\drivers\x64\3\ssnetmon.d64, when you try to open a session

    Original title: ssnetmon.d64 - error message when you connect

    When I log in, I get the following message.
    The message is as follows and appears three times:
    There was a problem starting windows
    C:\windows\system32\spool\drivers\x64\3\ssnetmon. D64

    I use Windows Vista Ultimate 64 bit

    Thank you for your response.

    The problem was due to the Seagull printer driver installation. I just reintalled driver to fix it.
  • Satellite L450D - 13P cannot start with the new HARD drive

    Hello

    IME novice steve and real computers.
    Two years ago I have toshiba purchest mine 2 is the toshiba satellite L450D - 13p runing windows7! And my partners is the toshiba satellite pro 7 also runing windows!

    The problem is that my hard drive is scrap, so I purchest a new 500 gb HDD, instaled it put in the disk I got with him and nothing?
    Hope any 1 here can help me

    Thanks a lot steve!

    In general you can swap the HARD drive or update it with more a (ability), but the installation of recovery should work. It is important to use compatible HARD drive for certain system.
    I did several times in the past. No problem at all.

    After HDD change the value of the BIOS default settings and start recovery installation using created the recovery disc.

    Start your laptop and when you see Toshiba welcome screen pres F12 repeatedly to enter the boot menu.
    When the menu is displayed on the screen, put the recovery DVD in the optical disc drive.
    In the menu choose you CD/DVD and press ENTER.
    Installation of recovery should start.

    Please do so and send feedback.

  • Satellite A660-158 - cannot start Windows

    Toshiba Satellite A660-158

    I bought a laptop Toshiba Satellite A660-158. It has served me less than a week. I think it's the broken hard drive.

    My problem:
    Once I start the computer, it started and has worked for a while, but suddenly, there was an error reading that I didn't have the time. Computer has been restarted. And does not load... Until the boot mode does not reach. But the initial test (with logo) succeeded. Takes a long time and finally gives an error:
    -----
    Cannot start Windows. Maybe it was because of the recent small difference is the hardware or software configuration. To fix this error:
    1. Insert your Windows installation disc, restart the computer (the complete transmission wasn't)
    2. choose the language settings, and then click Next.
    3. Select "repair your computer".
    If this disk is missing, contact your system administrator or computer manufacturer (he turned and said to wear to the DEPOT, but I do not have this feature).

    Status: 0xc000000e

    Details: Unable to start menu, since the required device is inaccessible.
    -----
    Please help me! Idon't know what make me)
    Please write to E-Mail: [email protected]

    Post edited by: HunterS7777777

    Hey,.

    And why do you think the hard drive is faulty?
    Have you ever tried the repair your computer option? Usually with this option you can restore factory in a few minutes.

    Also if you have the Toshiba recovery disc you can also restore the factory of this disc. Just boot from it and follow the instructions on the screen. You need to do a few clicks only, installation with all the drivers and tools happen automatically.

    If you have any other questions, please let us know! :)

  • Satellite Pro C650 - cannot start Windows more

    I have a Toshiba Satellite Pro C650 11Z model under Windows 7 Home Premium. I'm not very savvy computer. I can use my computer to perform tasks and use the software, but I m not very got when it comes to computer and tinkering under the hood, somehow.

    I was using the laptop yesterday evening to watch a You Tube playlist and was downloading a PDF 29MB file in the background. I have done this kind of thing before and never encountered any problems.

    When the download finished (I use Google Chrome) I clicked the button at the bottom left of the screen to open the download. You Tube then frozen.

    I could see the little green circle spinning around like loading upward download, but nothing was happening. Then Google Chrome no longer according to the bar at the top of the window.

    I tried CTRL + ALT + DEL, but the workload Manager wouldn t. The only thing I could do was turn off the laptop and running again, as it had frozen him completely. When I turned on it again, I had the Windows error recovery menu as shown in the following image.

    http://www.TechJaws.com/wp-content/uploads/2010/03/Win7-error-recovery.PNG

    The problem is that none of these options does nothing. If you choose the recommended option (for example Startup Repair) it comes up with the gray bar saying Windows loads the files and then will just a black screen. By selecting Start Windows normally gets you to the swirling colorful circles that make up the logo Windows and he said: start Windows but still once, it does nothing but just stick to that.

    A friend told me that a BIOS reset * may help. However, I don't know how to get the BIOS on the laptop. He called Insyde H20 installed and I don't see the option to access the BIOS.

    Someone at - it ideas as to what could have wrong and how can I fix? I don't have a recovery disc as my laptop was bought for me by a charity. The warranty has expired now so that I can contact t their support line.

    To be honest I don't think BIOS has nothing to do with it. Start your laptop and press F8 several times to display the advanced startup options. You will find the option to start the operating system in safe mode.
    If please test and let us know what happen when you try to do.

  • Satellite L30-113 cannot start Windows OS

    After downloading upgrades my computer does not start at the top. My computer screen shows a black screen, red, writing in the middle. He then goes to the screen, then go to windows error recovery page when you press on enter too lance beginning repair it then repeats the process and also switches its self off when you press start windows normally. I can't find the boot disks, the laptop is a Satellite L30 - 113 series.

    Mary Anne.

    Hello

    I had a similar problem on my computer but was able to fix it.
    I took my CD of Win XP and started the repair console.

    Then I used the command Chkdsk and scanned and repair files and sectors on the HARD disk.
    Then I used the Fixboot command. He writes a new boot sector on the system partition.
    Finally used Fixmbr command that repairs the boot partition's master boot code.

    Check out this page of MS:

    [How to install and use the Recovery Console in Windows XP | http://support.microsoft.com/kb/307654]

    Good bye

  • Satellite L450D - stops and starts again

    Toshiba Satellite L450D
    SER., no. 9442472 K

    Problem. Have a problem with the start. Unable to work, safe mode, safe mode etc. etc. (with the help of F12) or alternative start using (F2)

    Used system recovery disks created with Toshiba recovery Media Creator.

    Now have a never-ending cycle of
    Setup for the 1st use
    Welcome screen
    Please wait
    do not interrupt the closing down.

    Computer stops and the cycle begins again to infinity.

    Please tell us what steps should I take.

    Hello

    The computer really closes or is that only a reboot? The latter I think that everything is ok with your laptop. If you use the Toshiba recovery disc, the computer starts quite often until the installation is complete, this could happen 10 times.

    If your laptop really stops immediately, I think that it s a hardware malfunction and you should contact the nearest authorized service provider. In my view, that the technicians can help you! :)

  • Satellite C660-1FS - error starting Windows 7

    Hello to everyone. I have this laptop with Windows 7 Home Premium (no data by purchase of installation disc). Since this morning, I feel the following message/problem

    Windows error recovery

    Windows could not start. A recent hardware or software change might be the cause. If windows files have been damaged or misconfigured, Startup Repair can help diagnose and fix the problem. If the power was interrupted during startup, chose to start windows normally

    Start the reboot system (recommended)

    Start Windows normally

    These two options do not work. In addition, Windows cannot enter Safe Mode. I live in Belgium and I don't know what to do. I will try with windows 7 installation disc a friend (from Dell laptops) or should I contact Toshiba?

    Thanks in advance

    When you start your notebook F8 press to display the advanced startup options.
    You see here option called fix my computer?

    It must be in the first place on the top of the screen.

  • Satellite C650-1CP - cannot start Windows

    My C650, running on Windows 7 could not start properly today. When turn on/off he went to the Windows Error Recovery screen and gave me two options: run a startup repair and start Windows normally. I clicked on the repair option and on the bottom it says windows is loading files, then it's another loading screen, and finally to a black screen, which, after a few seconds, a cursor appears. No matter how long I left my laptop on nothing changes. So I decided to choose the second option, and he went to the splash screen windows with the logo of the movement. This form lasted around a minute, and then a blue screen with an error, which is then passed to a black screen. To see this error, I completely disabled the auto reboot on system failure in the F8 options and once restarted, he took me to the same error page.

    On the blue screen error was as follows:
    UNMOUNTABLE_BOOT_VOLUME

    She was followed by information saying that it's maybe a software / hardware problem and also to try safe mode.

    Technical information at the bottom were the following:

    STOP: 0X000000ED (0XFFFFFA8003DDFA50, 0XFFFFFFFFC0000185, 0 X 0000000000000000, 0 X 0000000000000000)

    I don't have a recovery disk, if I looked on websites have said recovery is built in. I also tried safe mode, repair your computer, last known config and other options in the F8 key, but these do not properly load and I end up on the black screen with a cursor again.

    I had originally to Exchange my laptop in a week to buy it because it was defective and I had a little less than 11 months, I wonder if there is a solution to this problem and also know if I am covered under warranty for this problem. Thank you.

    Hey,.

    Bluescreens are mainly problems of software or drivers so I think that reinstalling Windows would help to get rid of this.

    Why you don t have a Toshiba Recovery disk? I mean in the user manual it clearly written that you have create such a floppy yourself and it only takes a few minutes and you need to blank DVDs. All that s.

    The recovery disk contains an image of the settings from the factory with all the drivers and tools. It is an image pre-tested by Toshiba so everything will work after the installation of recovery. With this record, you are on the safe side.

    Anyway, you can order a recovery disc here:
    https://backupmedia.Toshiba.EU/landing.aspx

    Software problems are not covered by the warranty. Of course, you can make the laptop to an authorized service provider and guys are going to reinstall to factory settings, but you have to pay for this service.

  • Satellite L450D-11V to 10 Windows upgrade

    Try to download W7 SP1 upgrade by Toshiba or Microsoft. The two tell me what follows: -.

    Unsupported product

    The product key you have entered seems to be the software that was preinstalled on a device. Contact the manufacturer of the device for soft recovery options.

    Here are the details of the computer: Satellite L450D-11V

    Yes, the W7 software was preinstalled. Toshiba has never provided a disk.
    How to download Windows 7 Service Pack 1?

    Toshiba does not provide any records... you must create this disk using the preinstalled software called Toshiba recovery creator middle...

    This tool creates the recovery media that allows to recover the computer laptop back to factory settings...
    The system is already enabled and requires no button...

    If you have own OS, you need a valid key of Ms.

  • Satellite L450D - power but starts after 5 seconds?

    Hi all

    As the title says my satellite l450d has power going in when I press the power button. The green power light on the front of the laptop turns on, I also hear a commissioning cooling fan. The indicator light on the side for the dvd player also flashes on and off first. All this happens within 4-5 seconds of me by pressing the power button, you will hear then click on and the laptop goes dead. This occurs regardless if the battery is in or out.

    Any advice would be greatly appreciated.

    Thanks in advance.

    Hey,.

    To me, it looks like a hardware malfunction

    I found this interesting article on the Toshiba site:
    [What steps must be followed if your Toshiba laptop does not start? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

    If it doesn t work you need help I think that an authorized service. Guys check the exact reason and can replace all the pieces of equipment because they can order them directly from Toshiba.

    Have you contacted already guys?

  • Satellite A200-1YO - problems installing Windows XP Home edition

    Hi guys,.

    First of all I'm new here so Hello to everyone here and I hope you can help me with my problems of software.

    I recently bought a laptop model Toshiba Satellite A200-1YO provided with windows vista (which must be frank, pants and IMO too demanding for the machine) and I have a problem with vista, because some of its features do not seem to work, for example, I'm having a lot of trouble getting some of the webpages to open now, they simply hang out.

    now, I didn't install windows xp but I don't have an external floppy drive. This is not a problem but because I can use Nlite to integrate the drivers in a new ISO of Windows XP.

    The problem is that I have 4 sets of drivers: ICH7M_32bit, ICH7M_64bit, ICH8M_32bit and ICH8M_64bit. As I install Windows XP 32-bit while I'm more or less some that I have not need 64-bit drivers but when I install Windows XP by using the modified version of windows xp slipstreamed, what I get at startup is a BSD error telling me that something has crashed on my hard drive , however I can't say which crashed as the screen disappears after 15 seconds if that so I guess there is something wrong with the drivers I use (though I must admit that I'm not sure the drivers 32-bit to use)

    advice and assistance regarding being able to install windows xp would be welcome, as I said above, however, I can only use Nlite since I do not have a usb floppy drive.

    Satellite A200-1YO has a chip with the ICH8M southbridge Intel GM965.

    So you need the driver for SATA ICH8M_32bit.

  • Problem starting Windows

    My computer windows says the usual power falier signs that give you a choice of starting in the following modes.

    -Safe Mode

    -Safe Mode with networking

    -Safe mode with command prompt

    -Last good Configuration known (your most recent settings that worked)

    -Start Windows normally

    but none of these work no matter what safe mode goes down a long list of names of sys files that occupy the entire screen and restart again and again and more I like to let restart it self over and over again for I don't know one hundred times as broly power screen it has a clock at the bottom of what makes automatically go after 30 seconds and the bios don't recount not and problems heres a picture of what he seems especially that this picture has been croped, so you can't see the timer or something other than the upper left sorry that's all what I could find.

    And here's what the list was before it restarts out of safe mode, I don't know if it's the same exact files but to my eyes, this is what it looks like.

    Oh and one thing the hard disk appears in secondary undre the CMOS and BIOS.

    Also how to install windows xp home edition on the BIOS

    Hey Cole,

    1. what operating system do you use?

    2. don't you make changes to the computer before the show?

    3. what error message do you get when you try to start the computer normally?

    I suggest that you try to disconnect all the external devices connected to the computer and check the issue.

    You can check the link below to install Windows Xp on the computer.

    http://support.Microsoft.com/kb/978307

    Hope it will be useful.

Maybe you are looking for

  • DisplayLink Core relocation fails

    I have a VGA PA3541U-2PRP dynadock dynadock. I had to reinstall the dynalink software and later got 2.3 c on the download site. When the video driver try to install it comes back with a message saying that it cannot find "DisplayLinkCore.msi" and doe

  • Scan to PDF - F2210

    I am wanting to scan documents and save as PDF, however I don't see pdf as a file type option to save it as file type dialog box.  Aid said: I am able to do this.  I hope someone can help.

  • document in the queue will remove nit

    have a desktop 305 has and can not delete an item in the queue, any thoughts on how do?  I tried everything...  Thanks in advance

  • My computer has more than 26000 events in Event Viewer

    My computer has more than 26000 events in the case where the viewer and I got a call this morning saying I'd let microsoft engineers have control of my computer do it for me. Should I trust this guy or is there no real problem?

  • BlackBerry Smartphones Yahoo Calendar Sync

    Hi all, new to the Forum and the BlackBerry world and I have a question.  I tried searching here and on Google and could not find a definitive answer. I'm running an 8830 WE, with o/s 4.5 and have Desktop Manager 5.0 on my PC at home.  I use BIS and