Satellite L450D-failure of the creation of recovery disks

Similar Questions

• Satellite A500 - problems with the creation of recovery disks

  Hello
  I bought a Satellite A500 yesterday and now I'm trying to create the recovery discs before anything else.
  However, towards the end of the 1st DVD I get an error message saying "Faile dto open the next file. e:\Boot\BCD (0201123-F1-00000000 error code)"and then when I click 'OK', the DVD is ejected giving a message"unable to create recovery 1' media. Physical examination, I noticed that the DVD is written almost entirely.

  Any advise on this? In addition, in the interface, it shows a USB option and says to insert a USB media with more than 7 GB of free. That I can use it to create the recovery disk? If Yes, when I reinstall windows 7, this allows as a bootable drive?

  Greately appreciate any help on this matter. If it is defective, I want to return as soon as POSSIBLE.

  Thank you
  Mercier.

  As far as I know, that you can not use external device for recovery, it is therefore very important create recovery DVDs.

  Try to create the recovery disk using only DVD-R media. Use high quality media like TDK or Verbatim.
  Last month, I've created on the Satellite A500-157 recovery discs and everything went well.

• Satellite L300D-12I: error of calibration of power while the creation of recovery disks

  I have a laptop Satellite L300D-12I & get a "power calibration error" when trying to create Toshiba recovery disks. Does anyone have any ideas how to get over this?

  Power calibration error especially if the laser lens cannot calibrate (moving) in the right position and can not handle the inserted disc.

  In most cases, the STRANGE must be replaced. :(

  I put t know why it happened on your L300 but I hope that your warranty is valid
  So contact the ASP as soon as possible and ask for the check!

• Solution of workaround for the creation of recovery disks!

  I have a Compaq CQ50-110US (5-6 years) running Windows Vista service pack 2 (32-bit with 3 G of ram) and I never did the partitioned hard drive recovery discs and as I would like to add a larger HARD drive I'm making them. I tried to do and as soon as I begin the process immediately, he goes to "Cancel" mode, even though I did not choose Cancel. I found the advice of HP to turn off UAC (user account control is what this means, in my view) and have chosen to disable this feature, but it seems does not make the difference because he always goes to 'Cancel' and it does not change if I have a blank media disc in or on a usb flash drive. My only question is, are at - it alternative workaround to get it do not jump right to the screen to cancel it or have a free program that will do it more easily. If I have omitted any information that could help forgive me being a novice to this is my kryptonite and I'm better at some hardware upgrades. These are the questions of software that suck when it goes the instructions say fine, thank you.

  Sorry I have never seen this behavior and have not the slightest idea. You can order your Support page recovery disks. Scroll the list of the drivers/software to see the command option.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=3752689#N1339

• Which disks are accepted during the creation of recovery disks?

  Hiya

  No one knows the answer to this question. I just bought a HP Pavilion dv3-2310ea and wanted to create recovery disks, as shown in the installation instructions. I used Verbatim DVD - R 4.7 Gb 16 x 120 min and the laptop wrote things on the disk, but it cannot check in the end. Thus, none of the recovery disks is possible.

  I got fed up with the purchase! There is no indication on what drives exactly may or may not be used. It's a waste of money, nothing else, the inserted disc cannot be used for anything else.

  Help, please.

  Thank you.

  Sony DVD + R is one I always get good results with and recommend here often. A search of the forum should increase several posts like yours where it has solved the problem.

  Or, as suggested_contact HP and tell them your effort failed and ask a set to be sent. HP used to send em free in this case if you are still under warranty... not sure if this is still the situation.

• Qosimo G50 - 12G error occurs during the creation of recovery disks

  Nice day

  I have a Qosimo G50 - 12G and I tried several times to do disk recovery, but at some point
  the following error occurs:

  The following file cannot be read

  G:\08299Xsp4.SVM

  Error message: 020150-20-00000000

  Does anybode know what it means and how to fix this?

  Thamks

  Hello

  Have you changed something on your laptop? For example, the partitions of size or do you remove any content of the recovery of HARD drive partition?

  What is the G: drive in your case? Is it a partition or a CD/DVD player?

  I m not very well why this error pops up, but some users here in the forum reported about errors during recovery disc creation. In most cases the use of other and different DVD helped to address this problem.
  I m using the TDK DVD-R and I'm happy.

• Some additional questions about the creation of recovery disks

  HP Clubhouse 17 laptop laptop 17-e040us

  Wireless connection

  Disks creating information that I downloaded from the HP website, he States "If you are prompted for an administrator password, type the password confirmation or providide.

  How to create an administrator password?  The only areas where I created passwords on the laptop are the Login Screen/signature to the PC, Mirosoft account and a Description of the computers.   How can I give confirmation?

  Disconnected from the internet.  After the login screen and go to the start menu, I'm not connected to the internet.  Fix?

  Do I have to disconnect external equipment of the laptop before you create recovery discs?

  During the process of creating, if it has stop or, a message that something is wrong, what should I do?

  Thank you.

  You're not likely to be asked for Admin password unless you use a user account created with Limited permissions such as we would be put in place for another user on their machine. Some people share a machine with children, adolescents and setup one account limited for them.

  I never really worried about to disconnect Internet-just don't have Internet Explorer or Email app open and active on the internet. You could always disable the wireless I guess. Usually the F12 key in the top row turns stylized / disable tapping. White = light it.

  If you have a problem... just after this problem if the Recovery Manager gives no details of what you need to do about it. You can always phone HP and request a recovery media if the process fails for you.

  Just try to stop worrying and thinking that it. Go ahead!

• Creation of recovery disks - problems

  Hi all

  I wonder if anyone can help me?

  I recently bought a used HP Pavilion DV6 (DV6-2110ea - product number: VY095EA) laptop and I have problems with the recovery system.

  When I bought it, I managed to recover the system to set up the laptop back to settings by default, and as an afterthought, I tried using the recovery software to see if I could create a set of disks.

  I ran the program expects to be told that the records had been created, but the software came with the message that he has split the partition to create the DVD.

  After a while, he came with a message saying that the disc 2 of 4 was created and asked for the next DVD.

  It seems that the creation of recovery disks never finished original owner and I was wondering if there was a way to start the process so I could successfully create disks.

  Any help you guys could give would be extremely useful.

  Thanks in advance.

  Re the above:

  I have authorized the creation of recovery software complete two final discs that then created file "hpdrcu.prc" in both the location suggested above.

  I deleted the and represented software and it has allowed me to create a complete set of discs.

  Whether if they work, it is another matter altogether, but I'll cross that bridge when I come to it (again - there's always Linux)

  Thanks anyway.

• Satellite L450D - cannot use the product recovery disc

  Hello

  I'm new to this forum and have spent 3 days reading this and other forums to try to solve my problem, I found a lot of answers, but none does not work for me so I'd see if I could get the thought some very great need help here.

  Now, I have the problem that when I start the laptop the windows logo appears, then Microsoft corporation through the bottom and then the screen black with the cursor of Pentecost, I tried all possible starting in the bios settings and just goes back to this screen, I can t get no prompt or anything like that , I used knoppix and managed to transfer all the files I need from my external HARD drive, so thought I would not reset to factory settings with the recovery disk of the product supplied with the notebook, the disc never has been used or taken from the package until now is so in perfect condition of the art, so I put in the drive , start computer press f12 and make the primary boot CD, but all that happens is it says windows is loading files and get back to the dreaded black screen and a cursor.

  Can someone please help?

  If you have the original Toshiba Recovery disk I assume you have older model laptop with Windows XP Home edition old. To be honest, it would be interesting to know is you.

  In any case, out of curiosity but can only begin preinstalled OS in safe mode?
  Enter the BIOS settings and set its default value initially. After ding this change BIOS boot order and place the CD/DVD as first boot device. Put recovery media in the optical disc drive, and boot up your laptop. While the laptop tries to start C press several times.

  Usually, this should force your laptop to use ODD as the first boot device.
  Long ago, I had similar problem and such combination helped to force the ODD to read the recovery disk and Windows XP Home edition recovery facility. Of course, I hope that everything is OK with your HARD drive.

  Please test and send feedback.

• We live errors in the creation of recovery media. Please try again

  Hello

  I bought the windows 8 hp pavilion series laptop and tried to create the recovery with blank disc DVD - R disc.

  While burning data first drive the HP Recovery Manager application up the pop-up message like "we live errors in the creation of recovery media. Please try again' with the OK key.

  Press the button Ok app closed automatically once.

  Model laptap

  HP Pavilion n003tx-15 Notebook PC (Windows 8)

  Please someone help me.

  Thanks in advance

  Concerning

  Trehout

  Have you tried to burn in Mode safe?

  http://support.HP.com/us-en/document/c03481733

• Satellite L750 - access to the HARD drive recovery partition

  I need to reset the drive to factory settings, but can not access the recovery starts. I read the manuals

  http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm
  http://APS2.toshiba-tro.de/KB0/HTD16036F0000R01.htm

  This information do not work for me. This utility, I did not at all.

  My serial number 7b421068w L750

  I tried to run the recovery partition, I disable for laptop and lit keyboard '0' key and tried other keys F1 - F12, but system just beep with a blank black screen and then Toshiba displays menu and the Windows loading as usual.

  He has a record of factory "HDDRecovery" on the logical drive D: with all default recovery files

  Post edited by: clients

  Missing a very important information: preinstalled OS the original that you have with your laptop or you have installed a clean version of Windows?

  When you buy the new book it comes with factory settings. If long your laptop has this plant, you will be able to install the recovery image according to instructions with F8 at startup. If you change something that it will no longer work (install own os, partition structure).

  In this case you must use the created recovery disc but I assume you didn't create one although it is clearly described in the document s user manuals.

  Problem is that you can't do much. Either it works or not. If there is no way to install image recovery I'm afraid you need to order the new Mr. recovery disk you can do it on https://backupmedia.toshiba.eu/landing.aspx

• Creation of recovery disks, (new)

  Hello

  I own a Compaq Presario CQ56 Notebook running Windows 7 64 bit I have owned for less than 1 year.

  Recently, I went into the Recovery Manager and ran the creation of recovery media to create backup diskettes.  She needed to complete 4 discs.  I bought new DVD-R discs.  The first drive was a success.  When I was asked to put in the next disc has not then I tried 4 times and each time it failed.  It's a long process, so I gave up for the day.

  A few weeks later I tried again.  The problem that I ran was this recovery media creation began where he left off and began to drive 2.  I had no idea he would do that and unfortunately I threw the 1st disk successfully a few weeks earlier.  I was able to create the last 3 discs but now I don't have the 1st disk... grrrr.

  My question is, is it possible that I can fix this and all 4 disks?

  Thank you very much

  Brenda

  

  Hello Brenda,.

  Sorry for your trouble create recovery disks, because you are still under warranty - please call the 1,800 HP Invent and request HP Recovery media and it should be free of charge.

  Kind regards

• Question about the use of recovery disks Vista Bus on T500 with XP Pro downgraded

  I searched to see if this has been addressed already and I don't see anything about it. I also looked through the Lenovo support site and could not find any documentation with specific information, that I'm looking. So, if all goes well, the people here will have an idea.

  I have a T500 which was ordered with retired on WinXP Pro. It also came with a set of Vista Business (four discs) recovery disks. I plan to get my machine with Vista business records and down XP Pro, but I had a few questions.

  1. as it currently stands, I guess that the R & R partition that is on the HARD drive at this time restoring a WinXP Pro system if I start and get back with her. Is this correct?

  2. If I boot from the recovery disc Vista Business and use it for the recovery of the system, it creates a new partition 'Factory' R & R which would incorporate a Vista Business install?

  I may be wrong on my assumptions and even after the start of the R & R partition, it is really the recovery disks that I choose to use that would dictate if I found myself with a XP or Vista Bus. System.

  For what it's worth, I created a set of recovery disc R & R for the installation of WinXP Pro in case I need to revert to this version.

  I hope that my question is logical and that someone out there has an answer for me.

  Thanks in advance!

  jskang, welcome to the forum,

  Yes on both counts.

  Removal of all the hard drive recovery disks, create the service partition and then the system installs from the recovery with the flavor of windows partition, so that the discs are.

  It was a good idea to create the XP discs.

• Creation of recovery disks without the ability to boot - Satellite L300

  Hello!

  I have a Toshiba Satellite L300-139 (Vista, 160GG, 2 GB of memory).

  Hard drive has been damaged (when Vista starts, the system won't start at all, and each time only a white screen with the mouse arrow is shown--> tried all the choice + start PE etc but there is no access to the Recovery Console) and it doesn't have the ability to run the CHKDSK command to resolve this problem.

  No recovery disk was created when the computer was new.

  I removed the hard drive laptop and plugged into my desktop computer, but 2 partitions on 3 were damaged, and I managed to recover data, including:

  c:\Program Toshiba
  d:\HDDRecovery

  Data recovery was made using www.sysresccd.org and external USB hard drive.

  I copied all the data on the USB drive and run program TRORDCLauncher (run as administrator). He didn't he removes my vista DVD player and it fails with the error (rough translation):
  "Another process is using the drive or there is no available disks. Check the status of the drive. [OK] »

  It seems that the recovery of the Images have been created with Windows PE 2.0 tools (Imagex), but that the data is spread around the files I was able to manually create the recovery disks.

  Ideas and knowledge how to create diskettes of recovery with this data, what I have or what I need to order the DVD and wait a few weeks before sunrise to new system?

  Thank you!

  -L

  PS.
  If anyone knows a nice solution for Microsoft CHKDSK running to my computer, I would be happy! Tried: PE starts (versions of Vista and xp) + all recovery methods that were available in my computer... a Simple boot with sata support and run CHKDSK ISO image would be nice!

  Sorry but there is no chance that you can create recovery DVDs. Recovery DVDs can be created if you use creator only Toshiba Recovery tool and unfortunately there is no way to do it.

  Using F8 HARD drive recovery procedure can work only if the HARD drive configuration is not modified (new operating system installed), the HARD drive recovery folder must be placed on the second partition.
  So with short words, you can do this only if the laptop to factory settings. Now, you can't do anything other than the original new order DVD of recovery for this model of laptop.

  If you want to do this you can order under https://backupmedia.toshiba.eu/landing.aspx

  Good bye

• Satellite L450D - reset in the factory installation

  Hi guys, tried a factory reset and the laptop turned off itself to half way through, and I can't return it to all the. The laptop is a Toshiba Satellite L450D-11w and it was under windows 7. When I try to load it up I get the message bootmgr lack press ctrl alt del to restart.

  Tried to get into the bios and start but do not have much options just hd and cd drive not working. I also turned off and tried holding zero to load once warned a friend told me should appear, without success. When I go to boot the drive configuration only options I have are toshiba mk3263gsx-(s2) or tsstcorp cdvdw ts-l633c-(s4). I have no idea what to do from here after trying a few options, would be really grateful for the help.

  Thank you
  Damien

  Hello, Damien

  It's that the recovery image installation can not be interrupted. If this happens there is big problem because it cannot be continued and also you are not able to start from the beginning.
  HARD drive recovery facility is ruined with other words.

  Now, all you can do is to install the recovery image using the installation of recovery disc.
  I m afraid you didn't create one, right?