Satellite L450D - need help with CPU upgrade

Similar Questions

• Need help with problems upgrade memory on Pavilion DM4

  I have a Pavilion DM4 1201us with original DDR3 2x2gb memory cards.

  I bought a pair of Corsair DDR3 1333 Mhz 4 GB memory cards.

  I have the latest BIOS (F.27) and I'm running the OEM Windows 7 Home Premium 64 - Bit. SP1.

  The BIOS recognizes the 8 Gb and when I run the BIOS memory test it runs without error.

  When I try to boot Win7, it gets somewhere before the logon screen and makes a BSOD with a message about a new memory being installed.

  I went back the Corsair Memory cards, but you need to know if there is a problem with any upgrade up to 8 GB of memory with my particular setup. HP offers an upgrade to 8 GB with the same spec boards. (I'm beyond the warranty period!)

  Any thoughtts?

  Interesting!

  I can tell you that the model only supports 8 GB memory: http://support.hp.com/us-en/document/c02704310

  Have you tried more than one kit of 8 GB?

  The reason why I ask is with memory DDR sometimes reticular sticks will pass all the tests if the two sticks are installed then a stick could be bad without you knowledge.

  Also you tried a bar of 4 GB and a 2 GB stick to see how it worked?

• Need help with the upgrade of the WLAN on Satellite Pro 6100 minipci card

  Hello everyone, I desperately tried to update my WIRELESS card on my laptop SP6100, since it was delivered with a card minipci wifi-b, which is not fast enough today. s standards.

  Each piece of the Toshiba official documentation mention the SP6100 has a mini-PCI type 3a slot, so can accommodate two minipci card a type 3a and 3B wifi.
  But unfortunately for me, I discovered the hard way that it is absolutely NOT the case - I was put back by a fortune by buying costs for a type3 intel minipci wifi card, which does NOT at all on the laptop.

  I spent an hour in unnecessary calls to the customer service from Toshiba, that I had to convince PCMCIA certainly isn't the same as miniPCI, and Mini - PCI cards ARE CERTAINLY replaceable by the user. She insisted that she could not be changed by the user of the system, but by toshiba themselves.

  Could someone please please advise me on the type of wifi card that are built with the SP6100 laptops? I think is it AGERE brand, in the form of WLAN minipci card. I know that it IS certainly NOT miniPCI type 3.

  Help, please! Thank you.
  And besides, every place that I tried so far appears only sell type3 miniPCI cards,
  Other types of Mini-PCI cards are available to retail customers?

  Infinite thanks!

  Hello

  You must understand that your model of laptop is quite old and right now the market wasn't available standard b. I'm pretty skeptical that you will be able to use the standard WLAN with G maps due to compatibility issues. On this forum, I founded several threads that people write about the problems of upgrading older models of laptops with the new wireless network cards.

  In my opinion the best solution for you is to use a PCMCIA WLAN card. The installation should be easy and you can use the wireless network with faster data transfer adapter.

• Satellite L750 - need help with the identification of the hardware parts

  Hi all

  I have a Satellite L750 motherboard and need to replace the header/plug in which is plugged in my cable from the screen.

  Would you be able to tell me what's the name of components and where to find it please.

  This kind of repair on laptops is very complicated because there is no certain stores where you can order these parts. Usually if something doesn't work not the whole mainboard needs to be replaced.

  I can only imagine that you can find a few faulty mainboard (faulty CPU/GPU) and just swap this connector.

• Satellite L300D - need help with the installation of the display driver

  Hello

  For 1 month, I need to update my display on my Satellite L300D driver (PSLC8C - 06NO19) with an ATI RADEON 3100.

  I tried to download the drivers on the Ati site, but when the installation has finished, nothing has changed. My driver is still the old man.

  I tried to download the driver from the Toshiba site, but for my model, I found the same old driver.

  Is there a way I can install the driver manually, like a normal computer? Or I'm stuck with this driver, given that Toshiba does not seem to take care of my old L300D :(

  Thanks in advance,

  DanPabst

  PS: Sorry for my English but I'm French from the Canada game

  Hello

  > I tried to download the drivers on the Ati site, but when the installation has finished, nothing has changed. My driver is still the old man.

  did you remove the old driver before installing a new one? The old driver must be removed and laptop rebooted and installed the new driver, then. Note, I read many threads on an installation driver from the vendor's site in this forum, as not recommended due to overheating which provided with the toshiba drivers updated

• Need help with massive upgrade collection ForAll

  HI - I'm doing an update of the collection/ForAll in bulk but will have questions.
  
  My statements look like this:
  

       CURSOR cur_hhlds_for_update is
          SELECT hsh.household_id, hsh.special_handling_type_id
            FROM compas.household_special_handling hsh
               , scr_id_lookup s
           WHERE hsh.household_id = s.id
             AND s.scr = v_scr
             AND s.run_date = TRUNC (SYSDATE)
             AND effective_date IS NULL
             AND special_handling_type_id = 1
             AND created_by != v_user;
  
       TYPE rec_hhlds_for_update IS RECORD (
            household_id  HOUSEHOLD_SPECIAL_HANDLING.household_id%type,
            spec_handl_type_id HOUSEHOLD_SPECIAL_HANDLING.SPECIAL_HANDLING_TYPE_ID%type
            );
  
       TYPE spec_handling_update_array IS TABLE OF rec_hhlds_for_update;
       l_spec_handling_update_array  spec_handling_update_array;

  And then Bulk Collect/ForAll looks like this:
  

         OPEN cur_hhlds_for_update;
         LOOP
         
          FETCH cur_hhlds_for_update BULK COLLECT INTO l_spec_handling_update_array LIMIT 1000;
          EXIT WHEN l_spec_handling_update_array.count = 0;
  
          FORALL i IN 1..l_spec_handling_update_array.COUNT
            
          UPDATE compas.household_special_handling
             SET effective_date =  TRUNC(SYSDATE)
               , last_modified_by = v_user
               , last_modified_date = SYSDATE
           WHERE household_id = l_spec_handling_update_array(i).household_id
             AND special_handling_type_id = l_spec_handling_update_array(i).spec_handl_type_id;
  
            l_special_handling_update_cnt := l_special_handling_update_cnt + SQL%ROWCOUNT;          
            
        END LOOP;

  And this is the error I get:
  

  ORA-06550: line 262, column 31:
  PLS-00436: implementation restriction: cannot reference fields of BULK In-BIND table of records
  ORA-06550: line 262, column 31:
  PLS-00382: expression is of wrong type
  ORA-06550: line 263, column 43:
  PL/SQL: ORA-22806: not an object or REF
  ORA-06550: line 258, column 9:
  PL/SQL: SQ

  My problem is that the update table contains a composite primary key so I have two conditions in my where clause. This the first time I try even the update of the collection/ForAll in bulk and it seems that it would be straight forward if I was only dealing with a single column primary key. Can someone please help advise me as to what I'm missing here or how can I achieve this?
  
  Thank you!
  Christine

  You cannot reference a column within a record when doin one for all. You need to refer as a collection. So you'll need two collections.

  Try like this,

  DECLARE
     CURSOR cur_hhlds_for_update
     IS
        SELECT hsh.household_id, hsh.special_handling_type_id
          FROM compas.household_special_handling hsh, scr_id_lookup s
         WHERE hsh.household_id = s.ID
           AND s.scr = v_scr
           AND s.run_date = TRUNC (SYSDATE)
           AND effective_date IS NULL
           AND special_handling_type_id = 1
           AND created_by != v_user;
  
     TYPE arr_household_id IS TABLE OF HOUSEHOLD_SPECIAL_HANDLING.household_id%TYPE
                                 INDEX BY BINARY_INTEGER;
  
     TYPE arr_spec_handl_type_id IS TABLE OF HOUSEHOLD_SPECIAL_HANDLING.SPECIAL_HANDLING_TYPE_ID%TYPE
                                       INDEX BY BINARY_INTEGER;
  
     l_household_id_col         arr_household_id;
     l_spec_handl_type_id_col   arr_spec_handl_type_id;
  BEGIN
     OPEN cur_hhlds_for_update;
  
     LOOP
        FETCH cur_hhlds_for_update
          BULK COLLECT INTO l_household_id_col, l_spec_handl_type_id_col
        LIMIT 1000;
  
        EXIT WHEN cur_hhlds_for_update%NOTFOUND;
  
        FORALL i IN l_household_id_col.FIRST .. l_household_id_col.LAST
           UPDATE compas.household_special_handling
              SET effective_date = TRUNC (SYSDATE),
                  last_modified_by = v_user,
                  last_modified_date = SYSDATE
            WHERE household_id = l_household_id_col(i)
              AND special_handling_type_id = l_spec_handl_type_id_col(i);
     --l_special_handling_update_cnt := l_special_handling_update_cnt + SQL%ROWCOUNT; -- Not sure what this does.
  
     END LOOP;
  END;
  

  G.

• Need help with the upgrade/reload iPhoto

  iPhoto constantly crashed when I opened it.  He didn't stay open long enough to even load the library.   By reading the forum I found what I thought might work, so I've renamed it my library (which is more than 300 gig) "OLD iPhoto library" and put it on my desk.   So I uninstalled iPhoto.   I reinstalled iPhoto from my iLife 11 disc.   When I tried to open my library, it says that it cannot open because I used a new version of iPhoto in the past.   Then I checked and there is an upgrade.   Tried several times to upgrade but after a few minutes the upgrade it is said that the upgrade could not complete because of an error.

  I told my new iPhoto to start a new library, and then I dragged my old library on it.   He said he was "preparing to download" - then he warned me that there was not enough space so I want to continue?   I said 'no '.   My HDD is 500 gig.  My iPhoto library is 314 concert.   He obviously cannot reproduce itself on the same hard drive.

  So now, I can't have my old library of photos.

  Can I move my old library on an external hard drive, which could free up space on my internal hard drive, I guess.   Then I could copy it?   Who is?

  Any ideas?

  I use OS 10.8.5. This MacBook Pro is pretty old and I know that if I upgrade to Yosemite or El Capitan, some of my programs do not work - so I've been turned off of the upgrade of the OS.   Should I do it?

  iPhoto constantly crashed when I opened it.  He didn't stay open long enough to even load the library.

  Older versions of iPhoto on Mt. Lion keep crashing for a few months. This is because iPhoto can't access Google's servers for the functionality of the site. If you have photos with assigned places, iPhoto will crash, as soon as you open the Panel information for them. See this tip for the user:

  iPhoto 9.4 crashing during playback of the scene

  You can not iPhoto completely rework on Mt. Lion.  You can stop it just from crashing by disabling the feature patch places the iPhoto application.  To correct the iPhoto your best bet would be to restore the version of iPhoto you had your backup, and then change the iPhoto application as described in the user above trick.

  Or upgrade to El Capitan and Photos for Mac:

  Apple has stopped support for print as well.  It's time to move to El Capitan and Photos for Mac, or to find another replacement for iPhoto.

  I reinstalled iPhoto from my iLife 11 disc.   When I tried to open my library, it says that it cannot open because I used a new version of iPhoto in the past.   Then I checked and there is an upgrade.   Tried several times to upgrade but after a few minutes the upgrade it is said that the upgrade could not complete because of an error.

  How have you tried to upgrade?  use the Apple Support page accession, not the updates since the AppStore - they do not work any longer for iPhoto.

  I told my new iPhoto to start a new library, and then I dragged my old library on it.

  This way you do not upgrade and open the library you have imported all the photos into a new library. This does not work, because all the thumbnails and previews will be imported as separate photos, duplicate. You have ti first day to lat version you had once again, then open the old library by double-clicking it.

• Satellite C660 - need help with the fresh install of Win7

  After a problem with my 660 SatC, I decided to Nuke the hard drive and do a fresh install using a W7 32-bit disk created from the web (there is a free library of Windows 7 iso images (sorry I forgot name).)

  So I got the drive and the drive that has the drive, W7 is now saying that it can't find the device driver for the DVD drive it has been operating just to show him the first screen of W7.

  Looking for drivers for the DVD player but no joy on the web.

  Can someone help me please?

  Maybe stupid question on the start, but why you do not install original Win7 64-bit? I assume that you got your machine with preinstalled operating system.

  > If I had the drive and the drive that has the drive, W7 is now saying that it can't find the device driver for the DVD drive it has been operating just to show him the first screen of W7.
  Sorry, but after reading this sentence I m completely confused and do not know how to understand it. If you have created the bootable installation disk, I hope you were able to successfully install Win7. After the first boot, you continue to install all the necessary drivers, the tools and the utilities that you can find on the download page of Toshiba - http://www.toshiba.eu/innovation/download_drivers_bios.jsp

  Optical disc drive using Microsoft driver and there is no some special drivers for this device. It must be recognized automatically by the operating system preinstalled.

  If my ad was not helpful to you, please be more specific with the description of your problem.

• Satellite A200 - need help with boot USB

  Hi all,

  I have a starting problem with my Satellite A200.
  I boot from my USB. It is bootable Linux to install the tutorial is as follows:

  Insert the USB key or drive you want to boot from.
  Restart the computer.
  During startup, when prompted, press the appropriate button to display the Options of 'starting' Usually this is F2, F8 or F12 (displayed on the splash screen).
  In the boot menu, select the drive to boot from.

  The computer will now boot from the USB key or the first disc to change the priority of booting back to boot from the hard drive. Perform the procedure again, but to choose the hard disk in step 4 the computer will now start from the first hard drive.

  My share of any move to the right when it restarts with the connected USB still frozen and Toshiba screen but it does not load anything.

  F2 I want to access the BIOS it makes me wait, but nothing happens. I'm nothing like 1 HR wait for selections of F12 boot except that all the boot are marked exceptions for the FDD, one on which I want to start.

  I find myself facing a dead end because Toshiba loads must be connected to anything which is silly because I want to start on my key.

  If anyone has a solution...

  Message was edited: assignment has been translated

  Hello

  Please unplug your USB and start your laptop to see if everything is OK.
  Test with:

  F2 - to enter the BIOS settings
  F8 to display the advanced startup options
  F12 - to access the start menu

  If possible, try to enter the BIOS settings and set it to default settings.

  After that restart your laptop and use F12 to get into the boot menu. When the boot menu appears to put the USB into the USB port, choose USB as a boot device and press ENTER.

  But the first step is to check if you can get into the BIOS and change the default settings.

• Help with CPU upgrade (inspiron 530)

  I have a Dell Inspiron 530 with a motherboard FOXCONN G33M02, Intel Pentium Dual E2180 @ 2 GHz processor (socket 775, I think), 4 GB of RAM and a NVidia Geforce GT620 1 GB DDR3 video card. My children want their games to run better, so I think that the CPU is my next update. Dell support suggested the E2200, but that doesn't seem much of a leap. What is the max the G33M02 support? And should I worry about feeding, fans, BIOSes, other?

  Thanks in advance,

  Dave

  d.a.t.

  Dave,

  The Inspiron 530 with a card mother Foxconn G33M02, compatible with the following Socket LGA775 processors: -.

  Intel Pentium Dual Core 2140 (1.6 GHz, 800 MHz FSB)
  Intel Pentium Dual-Core 2160 (1.8 GHz, 800 MHz FSB)
  Intel Pentium Dual-Core E5200 (2.5 GHz, 800 MHz FSB)
  Intel Core 2 Duo E4300 (1.8 GHz, 800 MHz FSB)
  Intel Core 2 Duo E4400 (2.0 GHz, 800 MHz FSB)
  Wolfdale Core 2 Duo E5200 2.5 GHz, 2 MB, 65W, M0
  Intel Core 2 Duo E6320 (1.86 GHz, 1066 MHz FSB) 65nm
  Intel Core 2 Duo E6420 (2.13 GHz, 1066 MHz FSB)
  Intel Core 2 Duo E6550 (2.33 GHz, 1333 MHz FSB)
  Intel Core 2 Duo E6750 (2.66 GHz, 1333 MHz FSB)
  Intel Core 2 Duo E7400 (2.80 GHz, 1066 MHz FSB)
  Wolfdale Core 2 Duo E8400, 3.0 GHz, 6 MB, 1333 MHz FSB, 65W, 45nm E0
  Wolfdale Core 2 Duo E8500, 3.16 GHz, 6 MB, 1333 MHz FSB, 65W, C0
  Wolfdale Core 2 Duo E8600 3.33 GHz, 6 MB, 1333 MHz FSB, 65W, E0
  E6850 Conroe, 3. 0 g, 4 MB, 1333 MHz FSB, G0
  Conroe E6700, 2. 66 g, 4 MB, 1066FSB, B2
  Conroe E6600, 2. 4 g, 4 MB, 1066FSB, B2
  Wolfdale 3.0 GHz 65W Dual-Core E5700

  Before installing the processor, make sure you have BIOS Version 1.0.15 or a more recent version, when support for the new Intel processor has been added.

  G33M02 motherboards don't support all Core 2 Quad processors.

  Bev.

• Re: Satellite A500 - need help with the FN key and Toshiba programs

  Hello

  The fn key Eco and other buttons specialized such as the one that opens Windows Media Player have stopped responding on my PSAM3A-03P00E A500 running Windows Vista. I can always change the brightness of the screen with the FN key, but no menu appears at the top of the screen.

  Also Toshiba programs that are intended to be run at the start as PC Health Monitor are not auto start, even if they are enabled in the Configuration (msconfig) system.
  The Bluetooth Manager however initially runs upward.

  I have blue screen errors, but they are not a problem since I have updated the BIOS to 1.5 and uninstalled Zonealarms.

  See you soon

  Hello

  Try reinstalling the additional package of Toshiba. AFAIK, this utility is responsible for these functions.

• Need help with the upgrade and activation 10 WIndows in Windows 7

  * Original title: upgrade windows 10

  I am now using windows 7 ultimate sp1, today get 10 app shows upgrade windows to windows 10 now.i am now in a little confusion if I update to windows 10 can he turn what method?
  right to digital or by using the product key.

  Is this the same computer - not necessarily the same problem or the Windows version - as in one or more of these other threads of yours?...

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/Windows-10-upgradation/6eec5c3e-4391-4a67-8a02-56bba437f137 (13 Mar-16)

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-performance/Windows-10-slow-running-showing-logo-twice-when/a3b1bea1-8871-43f9-840B-efa46445a557 (Mar 04 - 16).

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-performance/Windows-10-Pro-blue-screen/4991e1a1-c54d-4B35-b28e-9ccfedec3359 (29 February-16)

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-update/how-to-get-November-update/390e4cec-d39b-4D6F-B03D-1d6ed069e25f (20 Feb-16)

• Is there a default value for the color management in PSE10? Beautiful photos from iPhoto, but blur with elements. I need help with this before as I consider that the upgrade to PSE13 and beyond.

  Is there a default value for the color management in PSE10? Beautiful photos from iPhoto, but blur with elements. I need help with this before as I consider that the upgrade to PSE13 and beyond.

  Printing which forms an angle seems ok, but one that is horizontally seems faded, incomplete.

  I was wondering if I saved a layer somewhere and set it as a default value.

  If you group the layers, you will be left with a single layer, thus spreading your concern.

  Suggest that you do the following:

  1. Make sure you have the latest drivers for your printers
  2. Reset the default preferences.

  Hold the Alt, Ctrl + Shift keys when you click the icon to open the items. When asked if you want to delete the settings file, say Yes.

  Items nearby and let regenerate the file.

• I need help for the upgrade of my current system.

  I need help for the upgrade of my current system.

  I have SBS 2008 with (Exch 2007, SQL 2005, Sharepoint, backupexec 2010 for sbs) licenses.

  I want to make the larger environment using the following:

  (1) apply Virtualization

  (2) apply to the failover process (clustering)

  "(3) the environment must support adding server terminal server, ERP server, exchange server, domain controller, backup manager.

  Storage 4) that supports Raid (1 and 5)

  UTM excellent 6) that supports (SSL VPN, VPN Global)

  suitable backup solution 7)

  (8) good antivirus for clients

  my questions:

  (1) can you provide me with a good design for this environment

  (2) should I choose what operating system:

  Microsoft datacenter or company

  I know datacenter provide us the unlimited VM but needs per processor license

  so if I have two Grouped servers I want to buy 4 licenses

  and just 4 VMs per company license... to say that we have two servers and maintain 8 vms so wat happened if 1 goes down... How can I migrate the 4 virtual machines on the server failed to another server group... ? should I buy enterprise license?

  (3) if I get the SAN storage for data... How can I save this storage... should I get another SAN?

  (4) how can I upgrade SBS stad single server (windows standrad) without losing the licenses as Exch 2007, SQL 2005, sharepoint.is it a must to buy an edition full std server or there is a way to upgrade (license wise, I mean)?

  (5) what about win2k8 license for VM:

  lets say we have physical that has windows license so that enough to have windows for VM or should I buy windows for VM licenses?

  (6) can I use backExec license for SBS with windows 2008 standard

  (7) who better to virtualization AMD or INTEL

  (8) hyper V or VMware?

  (9) what of Microsoft data protection Manager... is this good?

  (10) what virtual machine manager? What are the benefites keys

  Thanks in advance

  Hello AnasAI,

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• [Error number: 0x8024400A] Need help with this error... I reinstalled XP SP1 and I can't get an auto update that's simple to install, just get this error every time

  [Error number: 0x8024400A] Need help with this error... I reinstalled XP SP1 and I can't get an automatic update that's simple to install, just get this error at each time HHHHEEEELLLPPPPP! Thank you

  I had the same problem.  But finally found a solution.  If your listing is similar to mine, then keep.  XP Media Center Edition 2005 (sp2).  AMD Athlon 64 x 2 Dual-Core, HP a1630n desktop computer.

  Go to the HP website, search for sp37394-XP sp3 Upgrade utility Microsoft for systems equipped with AMD processors.

  I had the same 0 x 80240036, 0x8024400a error, but realize my problem was really get manually downloaded sp3 and installed without continue loop crashing and not error messages.