Satellite L450D PSLY5E freeze during the BIOS update - now does not turn on

Hi guys,.

I have a Satellite L450D. I recently tried (unfortunately) update the BIOS after a clean installation, because the FN key no longer working to bring up the toolbar.

Winphlash program froze near the end and the system remained frozen for a good half-hour. The only way out was to remove the battery (as I know in any case).

Now, the system will light with battery in or out and plugged in. I guess I've damaged the hard drive or the card mother or something.

Is it possible to fix? Or is it?

Thank you very much for your help.

BTW - I know now not to update the BIOS unless it is ABSOLUTELY necessary and well advised.

Joey

> I guess I've damaged the hard drive or the card mother or something.

The disk HARD isn t damage but the Rom module where the BIOS is stored was not flashed properly.
I guess that this happened because the flash procedure was interrupted.

I'm not sure if this can be fixed perhaps the service guy could flash the ROM module with special disc of crisis of the BIOS.

I keep fingers crossed

Tags: Toshiba

Similar Questions

  • Satellite Pro A100 crashed during Windows BIOS upgrade, now does not start.

    Satellite Pro A100 crashed during the upgrade of the bios from windows (upgrade the bios using windows), now the laptop will not boot. I press the on switch and it gives me just a blank screen, so I think that resets itself. I really need help solving this because I have a University paper due in the next few days and I need my laptop!
    Close for any help.

    It's a scream! :_| : O

    This looks like a damage ROM module!
    How did you do the BIOS update? I have red in this forum that a wrong procedure or wrong BIOS can damage the motherboard.

    I think that it s a deal. I put t know if it s needed to change the entire motherboard or update the BIOS again but I n t think you will be able to do it yourself.

    I think the best way is to ask the Toshiba service partner in your country.
    I think they'll give you more details on the handling of the Fryer

  • Satellite 1900 203 stops during the bios update

    I downloaded the BIOS update for my Satellite 1900 203 and put it in the floppy drive. the problem is that when updating the computer suddenly stops.
    I think the problem is in the software, but I can't get a solution of it...
    Fred

    Hello

    I would not recommend to download and install the BIOS on Toshiba Canada website!
    As far as I know your laptop was designed for the European market and you should always use the driver, BIOS of the Toshiba site European and tools!

    But I agree with dnf666. If the laptop works properly it s not necessary to update the BIOS!
    And note: the bad BIOS or bad BIOS can damage the module ROM!

    On the Toshiba page, you will find a teaching how BIOS should be updated on several models of laptops!

  • (Redirected) Aurora 4 updated BIOS update now does not start

    Hi all, I just formatted my PC installed fresh Windows 8.1. Downloaded the Aurora Panel and then noticed that there was a Bios Update recommended A3 to A11.

    He told me that I had to switch to A5 first, so I downloaded and it installed fine self. It was then restarted and since then his do nothing.

    No beeps, no display just the fans inside the base unit turning speed hyper and generally strong

    I left for 30 minutes and still made no difference.

    After that, I unplugged everything from the back of the pc. tried again and he still didn't fight with the fans care.

    Scratched inside the base unit and also tried to clear the CMOS and removed the battery and still no boot and load fans

    Is that all you guys you suggest I can do?

    Better in this position in the Alienware owners Club Forum, here:

    http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

    Bev.

  • Satellite A100-233 - freezes during the update of the BIOS

    I have laptop Satellite A100-233 PSAA8E-05J02ETE and I tried setting up LAN and wireless driver, but I can't.
    Can someone give me drivers? I tried drivers from support for Toshiba that there not. This driver may not work lan - 20071009151457.zip

    OS: Windows XP Pro SP3

    And when I tried the BIOS update and load the new BIOS: ok
    Analyze the compatibility of old and new BIOS: ok
    Read old BIOSES: ok
    Save the old BIOS to the backup file: ok
    New Flash start cant BIOS and 1-2 min after the gel cell

    I solved.

    but really not funny...

    If you are using 233 A100 PSAA8E-05J02ETE model laptop, you must use A100-PSAA8A very funny pilot...

    Post edited by: jadefox

    Hello

    I think that in this case you must go to an authorized service provider. If the laptop freeze during the BIOS update module ROM needs to be reflashed.

    On the Toshiba site, you can search nearest ASP and download all the drivers. Check this box:
    http://EU.computers.Toshiba-Europe.com > support & downloads

    Welcome them

  • My HARD drive is detected by the BIOS, but it does not start

    I have a laptop, OS is Window7, the HARD drive is detected by the BIOS, but it does not start, I formatted and the procedure going well until the reboot, it starts not to finish formatting.
    Please, I need help!
    Thanks in advance

    Hello

    Sounds like the hard drive has failed, or other hardware issues affecting the reader by the mother-
    Board or wiring.

    Check with Lenovo support, online documentation and diagnostics and ask questions about known issues in their
    forums.

    Support from Lenovo and downloads
    http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.do

    Lenovo forums
    http://forums.Lenovo.com/

    ---------------------

    The manufacturer Diagnostic utilities - use them to check the disk.

    (The old 302602 links isn't now valid for Diagnostics links).

    Manufacturer diagnostic utilities - run one to your hard drive
    http://www.techsupportforum.com/hardware-support/hard-drive-support/462298-no-IDE-device-found.html

    Corrected list dated 06/09/2010

    Fujitsu hard drives: utility of diagnosis here
    http://www.Fujitsu.com/EMEA/products/HDD/

    Hitachi hard drives: utility of diagnosis here
    http://www.HitachiGST.com/support/downloads/

    IBM hard drives: use Hitachi utility *.

    Toshiba hard drives: use Hitachi or Maxtor utilities

    Maxtor hard drives: Diagnostic Utilities here (now SeaGate)
    http://www.Seagate.com/www/en-us/support/

    Quantum hard drives: use the Maxtor utilities

    Seagate hard drives: here Diagnostic utilities
    http://www.Seagate.com/www/en-us/support/downloads

    Conner hard drives: use the Seagate utilities

    Hard drives Samsung: utility of diagnosis here
    http://www.Samsung.com/global/business/HDD/

    Hard drives Western Digital: utility of diagnosis here
    http://support.wdc.com/product/download.asp?lang=en

    Trial versions of one of these 'might' help.

    SpeedFan
    http://www.almico.com/sfdownload.php

    HD Tune
    http://www.hdtune.com/

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • I have a toshiba laptop purchased recently. After the scheduled updates it does not recognize the wireless network. I have to do a system restore. is there a solution for this problem?

    I have a toshiba laptop purchased recently.  After the scheduled updates it does not recognize the wireless network. I have to do a system restore.  is there a solution for this problem?

    Hello

    Make sure you have the latest network adapter drivers fron toshiba

    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

    and if windows update is at the origin of the problem change how to get updates to uncover the problem update

    When you have found the issue, a right click on it then invited uac then hide

    read the information on the link below

    http://www.bleepingcomputer.com/tutorials/tutorial140.html

    Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

    Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  • "The Windows update service does not work. Please restart your computer.

    If I click on "Check for Updates", a dialog box appears:

    "The Windows update service does not work. Please restart your computer.

    I rebooted several times, but the same error.
    Help, please.
    Thanks in advance.

    This site will help you get the update of Windows running service

    http://pcsupport.about.com/od/Windows-8/a/Windows-Update-settings-Windows-8.htm

  • -HP Mini 110-1025DX closed by itself while downloading the BIOS driver and now does not turn

    I have reintalled windows xp then download, audio driver gave error when downloading and I read on the internet that unless I have download BIOS, she held in error, so I downloaded "WinFlash for HP NetBook system BIOS - Microsoft Windows-Based" and while it was installing I did something else, and when returned, not e book had closed and now does not turn.

    the specifications are also less

    -HP Mini 110-1025DX PC
    Serial number: CNU9316D45
    Product number: VA723UA -.
    Operating system: Windows XP Home Edition (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.111025 - 1629)
    Language: English (regional setting: English)
    Manufacturer: Hewlett-Packard
    Model: HP Mini 110-1000
    BIOS: KBC Version 02.0 B
    Processor: Intel (r) CPU Atom N270 @ 1.60 GHz (2 CPUs)
    Memory: RAM 1016MB
    Page file: 514MB used, 1927 MB of available space
    Windows Dir: C:\WINDOWS
    DirectX version: DirectX 9 .0c (4.09.0000.0904)
    DX setup parameters: not found
    DxDiag Version: 5.03.2600.5512 32 bit Unicode

    What should I do?        Thank you

    It won't turn? The lights come?

    Let's first, remove the battery and unplug the power adapter and leave without electricity for a minute... then reconnect and see if it is eaten on.

  • Since the new update Illustrator does not recognize the graphics card to my SURFACE PRO 2 and the digitizer stylus does not work properly.

    Since the new update Illustrator does not recognize the graphics card to my SURFACE PRO 2 and the digitizer stylus does not work properly.

    Any ideas out there?
    I know the pro 2 surface is not the real model, but at least it should work fine.

    arwinq,

    You can see the system requirements, including the maps here.

    https://helpx.Adobe.com/Illustrator/system-requirements.html

    but I fear that you may be taken in this GPU issue described by butz in post #13 here:

    https://forums.Adobe.com/message/7773402#7773402

    You can try to switch between GPU and CPU by pressing Ctrl / Cmd + E, or you try disabling GPU performance by clicking on the icon of the rocket in the bar of the App, or on the top of the menu bar, deselect the box Performance GPU. You may also uncheck performance GPU in your preferences.

  • I use CS5.1 and installed a new hard drive. during the migration, PS now will not work. How can I reinstall? installation initial performed from the internet, no discs.

    I use CS5.1 and installed a new hard drive. during the migration, PS now will not work. How can I reinstall? installation initial performed from the internet, no discs.

    Download the CS5 products

  • Question 1: The button "Buy now" does not work when you select a plan. Question 2: Can not select "Monthly Plan" for a "unique App."

    Question 1: The button "Buy now" does not work when you select a plan.

    How to reproduce the problem:

    1. go in terms of pricing and membership creative cloud | Adobe Creative Cloud

    2. choose a plan, then click on 'buy now '.

    3. you go to a blank page instead of the next steps in the payment.

    Question 2: Can not select "Monthly Plan" for a "unique App."

    How to reproduce the problem:

    1. go into "https://creative.adobe.com/plans".

    2. under "Unique App", select a product and then try to select the "monthly Plan" in the second menu drop-down.

    3. for some reason, it isn't get selected and the price is replaced with the ellipsis (...). I expect the monthly price to appear.

    Please notify.

    Thank you.

    Contact adobe during the time pst support by clicking here and, when available, click on "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • Satellite Pro A200 - question on the BIOS update

    I have a Satellite Pro A200 (PSAE7E) with Windows Vista and XP that have been installed recently.
    In the driver of Toshiba page (BIOS update) says:

    "This Bios is only compatible for portable computers with Windows Vista!"

    (1) should I update my BIOS (1.4) or it'll be a problem for my windows XP?

    (2) anyone has try?

    (3) is there documentation on the BIOS updates (bug fixes, etc.)?

    Hello

    I will try to be very short with answers:
    1. If you use Windows XP Home edition on your laptop have BIOS update with the version 5.30
    2 this version of BIOS is available for days and it is possible that many people already tried. By the way: until Toshiba out something that is tested and verified.
    3. Unfortunately there is documentation about bugs and patches, but the fact is that Toshiba has designed the 5.30 version to support the features of Windows XP Home edition on the models of laptops designed Vista

    Good bye

  • Satellite A300 - after the BIOS update I can not install two OS

    Hello everyone:

    I bought a laptop Toshiba Satellite A300-247 with Windows Vista Home Premium.

    Then I formatted it and divided the hard (320 GB) into 6 partitions and installed Windows Vista and Windows XP on drive C to drive D after having changed the SATA controller mode in the BIOS for compatibility. The computer worked well with 2 operating systems. However, when I updated the BIOS to version 1.9, two operating systems stop working and one of them can be installed: XP can be installed when SATA controller mode is placed on compatibility and Vista can be installed only when the SATA is changed to AHCI.

    Is there is no explanation of what past? And can I install operating systems 2 together again?

    Thank you

    Hello

    First of all, I doubt that this has something to do with the BIOS update. I think that after the BIOS update HARD drive mode has been changed from AHCI to compatibility and therefore the OS didn't start.

    Anyway, in compatibility mode you can install Vista and XP without the SATA drivers. This should t be a problem.

    But do you know the difference between compatibility and AHCI? AHCI mode is faster and therefore I would recommend this mode.
    Like you said Vista you can already install in AHCI mode and for XP, you need Intel Storage Manager. This package includes the SATA drivers you need and here is a step by step guide to use these drivers:
    http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

    Last but not least, you can install 2 OS. You can do what you want! ;)

  • Satellite (Satego) P100 - Bug in the Bios - 3D - games is not possible!

    _Hello _

    I have a problem with my Toshiba Satego (= Satellite) laptop P100-491.

    Unfortunately the version of bios 4.7 installed Toshiba repair service, after that I can't play games in 3D without solid fps drops! This is the common problem with the satego P100 class.

    * The most recent bios, version 4.7, is a failure once again! *

    So I looking after a newer version, but right now, I still suck.

    * Toshiba Service is not able to solve this problem! Maybe they could give me a bios older without this bug, is - it possible? *

    What should I do?

    (Is there anyone with an older version, for example 4.5, who could give it to me?)

    Hello

    I read somewhere in the forum that an update of the graphics card driver should help you
    As far as I know after that the BIOS updated graphics card driver should be updated also.

    Check it!

Maybe you are looking for