Satellite L450D Webcam does not not after installing new free recovery

Hello

as published in the title of the thread, I have a problem with the built-in webcam in a laptop client. Two days ago, the operating system of this laptop has been damaged by a virus and had to be put back. I tried to install it with the recovery partition, which did not work. After her, I tried to re - built it with the dvd I burned the partition recovery with the same result.

The only thing that worked was a clean install with a detail of 64-bit windows 7 dvd and key printed on the sticker of the laptop. I managed to get everything but a part - the webcam works again.

No driver installation, the update of the bios and the re-installation has worked to get that part to work.

Someone of you know this problem and have a solution for me?

Thanks in advance.

Greetings Saphire

PS: One thing must be as important. When I look in the Manager of devices installed the driver for the webcam is listed as usb webcam and manufacturer of Microsoft.

Hello

Have you tried a last webcam driver released for series such as Satellite L770D for example?

The driver of the Webcam in the Satellite L770D section has the version 2.0.0.10. It s newer version for L450D
Maybe you should check this.

Here is the link
http://Support1.toshiba-tro.de/Tedd-files2/0/webcam-20110404132417.zip

Tags: Toshiba

Similar Questions

  • Satellite L450D respond does not after installing the camera software

    Hello

    I bought this month a return of the United Kingdom L450D. Yesterday I tried to install the Olympus digital camera software, but once installed would not work. Olympus site application is compatible with Windows 7, but I decided to uninstall the software. I wonder if I uninstalled something I shouldn't, because does not now.

    I have a message - Windows Explorer has stopped working with 2 options: find a solution online and restart the program or restart the program

    Problem is cursor will respond not with the touchpad. A couple of times without reply, tried FN + F9. Mouse connected, cursor moves but will not meet the comand

    Any ideas?

    Hello

    This means that camera Olympus software is causing this problem?

    Hmm you have tried to uninstall the software in safe mode? Go to the advanced boot menu (F8), select Safe mode. Then try to uninstall the usual Olympus software.

    In addition, you can try uninstalling with special tools like CCleaner. I use it often as it cleans the registry and others.
    Check it!

  • Integrated on my Satellite T130 webcam does not work

    Hi all

    the built-in on my Satellite T130 webcam does not work.

    I use Windows 7 Home Premium and already reinstalled the drivers of webcam 64-bit through this Web site. However, when I click on the webcam application, simply, nothing happens - program doesn't open at all or turn off instantly. Skype is not also acknowledge a cam. In addition, there is no webcam in Device Manager (a not detected USB device however) and no symbol of cam in the Ribbon of Toshiba quicklaunch, which is like the camera is started according to the "manual".

    Someone has an idea what is the problem? Looks like a common problem according to Google, but no suggestions other than to reinstall the drivers. Perhaps another application blocking the camera? Firewall settings?

    I'd appreciate any help, thank you.

    Best regards Florian

    > a USB not detected if

    Maybe it's the webcam from the webcam is connected to the internal USB controller on the motherboard.

    It looks like a webcam driver is not installed correctly.
    Try the webcam driver released for the satellite t230 or other series of satellites.
    Versions are newer

    Also recommend that you check the BIOS settings.
    In some cases, the BIOS contains a webcam option where the webcam can be turned on and off.

  • AutoComplete doesn't work does not after installing IE *.

    AutoComplete URL function works does not after installing IE8.  Looking at the Advanced tab properties IE I see an option to use AutoComplete (which is
    ticked off) but it is said to "..". turn of Internet Explorer".  Whatever that means, and how I seized not semi-automatic work again under IE8?  I can go back
    for IE7, if it's the only way.   I tried to hit "reset" on the Advanced tab I saw a thread on try this - but no go...  Thank you

    sjakulski,
    Thank you for visiting the Microsoft Answers community forum.

    In Internet Explorer 8, the Auto complete option is in a new tab.  Go to tools, Internet Options and then click the content tab.  You will see a section that says "Auto-Complete".  Click on the 'Settings' button and it gives you several choices of auto complete options.

    This should solve your problem.  Let us know if you need more information.
    Thank you, Gloria
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Satellite L350 - Webcam does not work, BUT NOW IT DOES

    Hi all

    Very recently, I bought a L350 pre-installed
    On the first day of use then the webcam does not work

    I always get a window with the header "HELL."
    The text: "webcam driver open fail. Please restart camera or computer.
    All you can do is to click on an "OK" button to close the window and that is it!

    Any help to solve this problem with is welcome...

    Thanks in advance

    I HAVE THE SOLUTION!

    Just update the driver, I got the version 6.0.6001.18000 from 21/06/06
    After update: version 6.2.238.214 02/14/08

    The webcam works!

    How early?

    Start--> Panel--> System-->--> Imagedevices--> Chicony USB2.0 device--> use tab Manager driver--> updated... Windows Vista looks like an update, believes that it is and install...
    And the thing doesn't work!

    Hope I was of any help

    Post edited by: mvereecken

    Here in the forum are already discussing this issue.
    A user named Akuma posted an interesting solution to this problem then try it. Maybe it will help you.
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=136549

    In addition it could be useful too:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=154131

  • Satellite A660 - Webcam does not work when using Skype

    I recently bought a Satellite A660-15J. I am running Windows 7 64 bit.

    I have the latest version of Skype (5.3.0.111).

    The integrated Webcam does not work when you run Skype. If I run the Toshiba Web Camera Application the webcam works fine. However, when I test it in Skype, I get a message saying "cannot start video. Try quitting other programs that use the webcam '.

    However, as far as I can tell there no other programs available. I have tried Skype with the Web Camera Application clised & open. I also confirmed that I do run the latest version of the program.

    One of the main reasons we have this laptop is to use Skype video... Help, please.

    Disable webcam application start-up and exit this application before you start Skype.

    I used Skype many different models of laptops, including friends A660 and it worked correctly.

    When you open Skype video settings is listed as default camera USB webcam?

  • Satellite L650 - Webcam does not work

    Hello

    My built-in webcam does not work. Just bought the laptop a month ago. Tried everything, including the re - install the driver but no luck. one had the same front and so what to do?
    I want to try it out myself before I approach the service center to save on time.

    see you soon

    Uday

    Hi Uday

    Can you start web camera app?
    What exactly happens? Is there an error message?

    When you check device manager is camera correctly that there are listed?

  • Satellite A300 - Webcam does not work and is not listed in the devices

    The web does not work the room, resettled several times drivers is not helping with the list of the facilities in the room is not present.
    What should do?
    Satellite A300 psag0e

    Drivers webcam sex cam live-20080616124250

    Hi maestro2118,

    Since when did you notice this behavior and what operating system is installed?

    Before install or reinstall a driver, I recommend you to remove the old driver first. Then, restart your computer and run CCleaner to remove old registry keys. A reboot, and you can install latest driver of the webcam of Toshiba page.

    Check this box!

  • Satellite L755 - Webcam does not work - interactive Windows station

    Dear community of Toshiba,

    I have a Toshiba L755 series. I was able to use the webcam with Skype. When running Skype recently, I was surprised to see that the camera could not be found.
    I went to the Device Manager to see what might be the problem, and there I saw everything 'imaging devices', as if the camera equipment did not exist originally.

    I tried and then searching for the hardware changes. New hardware has been found, but then try to install the driver, I get a message saying that:
    + Windows encountered a problem installing the software driver for your device. +
    + Error trying to install it and Windows found driver software for your device but he bumped. +
    + This operation requires an interactive window station. +

    Note that the device is recognized as: TOSHIBA Web Camera MP.
    I tried searching online for this find of t pilot but just could not.
    I also tried to download and install the driver from Toshiba support, but once again, still does not.

    Help, please.

    Thank you

    Hello

    On the European driver Toshiba page, you can find the webcam driver v2.0.0.19 and v2.0.0.13.

    Have you tried both?

    Usually the software of webcam located in the control panel-> software
    Uninstall the webcam software it and reboot the laptop.
    Now, you should clean the registry because each installation leaves other securities in the register that I can recommend a tool its freeware CCleaner and cleans the system very well

    After cleaning the registry, restart the system and try to install the webcam driver v2.0.0.19

    Good luck

  • Built-in camera works does not after installing the update

    Hi, can someone help me? :) because this laptop my sister after I installed updates, the webcam is not any job? Y does it have someone here will know how to re-enable? Because on the Task Manager, it says that it is suspended? Please help me. A user of windows 8. THANKS in advance for those who could help me get out of this.

    You have installed the Windows 8.1 update yet?  This solves a large number of topics.  In addition, Windows 8.0 approaches the end of support. It will always get critical security fixes, but no updates of the product. So definitely make sure that you begin by installing the platform 8.1 updated.

  • Satellite U400: webcam does not work with MSN - it is used by another prog

    My chicony webcam will not work on windows live messenger I want to use it for video chat.

    An error message appears saying 'we couldn't start your camera. Please check that your camera is not currently being used by another program, and then try again. "The camera is not currently in use, as far as I know I have closed camera assistant software and you have disabled the camera at startup.

    Please help with this problem!

    Also, I tried using a different logitech webcam, but the computer doesn't seem to recognize it even though I installed the software.

    Any advice?

    I U400 and I use the webcam in the Skype!
    Everything works perfectly.

    If you closed the camera assistant software then the webcam would not work without problems.
    Have you tried to start the webcam software, then MSN?
    Select this check box.

    I also disabled the webcam software in the msconfig-> Startup tab
    This prevents the webcam software to start during windows startup

    In the worst cases, you must remove the software from the webcam of the system and after restarting again, you must reinstall the software again
    Generally, this allows in most cases

    PS: Your operating system should be always up to date!

  • Satellite L450d-113 does not turn on

    Hello

    I wonder if someone can help me.

    All turns on my Toshiba Satellite L450d-113.
    I tried to take out the battery and hold the power button / stop for a while but nothing seem to work.

    I have some very important things about this University and I really need help.
    When I plug in the charger the power light blinks for a while then nothing.

    Any help would be really appreciated.

    Thank you...

    First of all, of all the good news:
    Your University stuff on the HARD drive does not seem to be affected because I think that HARD drive is not a malfunction. So you can remove the laptop HARD drive form and could connect to another computer using an external USB 2.5 HDD caddy.
    In this case, you will have access to personal data.

    Now back to the problem laptop.
    It looks like a malfunction of the physical environment and I guess parts like motherboard, CPU modules or RAM can prevent the unit of power.

    RAM modules can be replaced very easily, but I put t know if the RAM is really the troublemaker.
    Maybe you can visit some of downtown specialist for laptop to check the modules.

  • sounds works does not after installing SP2

    Help, after that I installed SP2 in my laptop Windows Vista, my sound has stopped working. I checked my sound system and update of my audio devices, but they are all perfectly fine. I cheked articles related to SP2 problems online, but they were not useful. I can't even uninstall SP2 because it does not! Also, I even tried unistalling all the updates I've installed SP2 and restarted my laptop for 5 hours, but nothing has WORKED. Help, please.

    Go to your laptop manufacturers website and download the drivers on their part.   Next time find a VISTA forum and not the Windows Home Server Ant.

    --

  • Treo 700W blue tooth w/daimler Chrysler uconnect works does not after installing the update.

    Anyone having problems with his tooth of 700W overalls after installing the update? My Jeep Grand Cherokee blue tooth uconnect system worked perfectly until I installed the update. Now, it will not work. I have went through all the procedures on several occasions. The phone will discover the uconnect, but when you put the 4-digit access code that you assigned to the vehicle, it does not connect thought the secure connection. I called Verizon and Daimler Chrysler and the two do not know why this won't work. I have reset the system, uconnect on the vehicle by their instructions. Any help would be greatly appreciated.

    Message is about: Treo 700w (Verizon)

    A hard reset of the Treo has solved the problem, but you will lose all your data and applications.

    Message is about: Treo 700wx (Verizon)

  • Satellite T210 - webcam does not work - image cloud appears

    Hello

    My webcam (embedded on my computer) does not work.
    When I turn it on it shows a blue light (advising that it is connected), but it does not have photos or videos without worrying, I use Skype or I use the webcam on a specific program. Appears only an image with clouds!

    Any suggestions?

    Concerning

    Use please effect option in the Web camera application and click on the tab called coverage of the screen.
    Make sure you enabled the option IT is.

    Please check and post comments.

Maybe you are looking for

  • Drag to the bottom of the formula

    In numbers 3.6.1. can you select a cell and then drag down to copy this formula in a column? This feature works like this in excel, there may be another way to do it here. Thank you

  • How can I remove NoScript, I don't know how I got it and I hate it!

    NoScript is driving me crazy, I can't log on to Facebook, or open links or Windows Media... I have cleared the cache, I tried to go into options... I have to remove all the modules, extensions, and plugins? Windows 7 professional OS

  • Approximation of the rational Fraction in Labview

    Hello I'm doing the equivalent of the following matlab function in labview: [N, D] is rat(X,tol) I've been using the mathscript, but it does not recognize my equation. Is there a better way to do it?

  • DAQmxCfgDigEdgeAdvTrig

    My ultimate goal is to create a step by step function (for example: 0v,)1V 2v 3v, 0v, 1v, 2v, 3v, 0v, 1v,...) where the transisition to a tension ofthe next is triggered by a digital input signal. The only way I see to do this is to use the DAQmxCfgD

  • nc4400 driver problems

    Hi, just did a clean install of XPpro on a nc4400, downloaded the drivers from the HP site and installed. Ethernet will not install and there are 3 unknown devices in Device Manager. Any help would be appreciated more Thank you urban