Satellite L50 - A - 1 c 7 won't start plus-erreur 0xc0000225

Hello

I had a 128 GB ssd in my laptop (hard disk enclosure) and 1 TB of toshiba hard drive but now I got a new pc and the ssd's in the Office
now I want to reinstall windows on my laptop but I still have this error 0xc0000225

I have the recovery cd and a bootable usb key but even when I change the boot order, that I continue to have this error, there is also an option to press f8 but when I do this the screen flashes

can someone help me?

laptop: toshiba satellite l50 - a - 1 c 7

now, I've discovered that my hard drive (it came with my laptop) was originally

now I have just an ssd in my laptop but now I got this screen:

check for the presence of media
no media present

After a time: he transforms:

Restart and select proper boot device or insert boot media in selected boot device and press a key

I have a bootable usb key but I can't go into the bios boot device set.
normally I go in the bios when I Press f4 but nothing happens, then I restart the laptop goes into the bios, but it freezes and cannot do anything about it.

If anyone can help me?

Thank you

Tags: Toshiba

Similar Questions

  • Satellite L50 - A - 1 5 PSKK6E does not start after upgrading memory

    Upgrade memory L50 - A - 1 5 pskk6e

    I have a memory ddr3 4 gb 1rx8 pc3 - 12800 S-11-12-b2 hynix and I tried to add another memory
    memory DDR3 4 gb 1rx8 hynix pc3 - 12800 S-11-11-b2, but it does not boot up the laptop.

    I tried to mount only the new but it won't start.

    Some ideas?

    I think that it s you already know that this Satellite L50 - has - 1 5 would support max 16 GB of RAM (2 x 8 GB)

    But why, box for computer laptop doesn t is very simple: the new modules are not compatible.

    I found modules recommended by Toshiba.
    These are:
    8GB DDR3L - 1600 PA5104U-1M8G
    4 GB DDR3L - 1600 PA5104U-1M4G

    Both are made of Kingston and the specifications are:

    Memory speed: 1600 Mhz PC3-12800
    Capacity: 8 GB (1x8GB module)
    Pins: 204 SODIMM
    Type of RAM: DDR3 SODIMM
    Verifying the integrity of data: non ECC
    Specifications:
    Latency (CL) CASES: 11
    Voltage: 1.35v

  • Satellite A60 - recovery disc won't start plus-disque no bootable error

    Hello

    I set the boot sequence to boot from the cd, but the message reads: no bootable disk.

    I tried to open it with ghost, but looking for a password.

    Toshiba Satellite A60.

    Hello

    First you will not be able to extract the ghost image file because it s set as you could see.

    I put t know why you can't boot from the recovery CD Toshiba. But reasons could be:
    -The CD is defective (zero, not more readable)
    -You used a bad CD
    -The CD/DVD drive can not handle this CD because of the lens of the laser drive old and faulty.

    Then you should check first if you can start on other Microsoft Windows CD to see if the CD/DVD drive is ok.
    If it is ok, then there is a problem with your CD!

  • Satellite P200 - 1FC: CD/DVD player won't start - error Code 10

    My Satellite P200 - 1FC was purchased in January 2008 and preloaded with Vista Home Premium. The DVD/CD drive is listed in the device as "TSST corp CDDVDW TS - L632H ATA Device" Manager.

    Initially, the drive worked perfectly, but recently refused to start. Device Manager it shows now with a yellow exclamation point and its status is given as "this device cannot start. (Code 10) ».

    By clicking on 'could not load driver software' product solutions but not solution.

    The search for similar issues in the forums of users suggests that use of a page of Microsoft Support Help & directed "the CD-ROM drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista".

    However it is to change the registry! As a relative novice, I am reluctant to do unless I can find no easier way.

    Should I bite the bullet and and enter into this minefield, or is there a better way?

    > At first the car worked perfectly, but recently refused to start. Device Manager it shows now with a yellow exclamation point and its status is given as "this device cannot start. (Code 10) ».

    Certainly, this error is caused by an incorrect registry entry.
    I had this error several times and I solved this disassembly of these registry keys upper and lower filters:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    Here are a few steps how it worked on my Windows system;
    -J' removed the Device Manager CD/DVD drive
    -Then edited the registry as described above
    -Restarting the laptop

    I'm sure that this will also help you.

    Good bye

  • Satellite M65 gives two beeps and won't start

    Hi all

    Need help. Why I turn on my Satellite M65, it gives just 2 beeps and nothing happens.
    No display. Tried the Express Media Player too... same thing.

    Can any body want to say 2 beeps?

    Thanks in advance!
    A. Moiz

    Thanks for pointing this out!

  • Satellite L50 - B - 2FC - no device capable of starting please don't restart

    No boot device able to please don't restart. How to do

    Enter your BIOS, make sure that UEFI is enabled, or if you are using a linux operating system allow inheritance.

  • Satellite P300 - 18 m - recovery disc won't start

    Hello

    I have for the recovery disk, but it does not start, so I can't yet to erase my hard drive.
    So far I have tried:
    -Start, then press f8
    -Start, then press c
    -start and press 0

    I've already changed my boot order, but my laptop still does not boot CD. The support page, I found several ways to fix it, but nothing works. It also seems that the cd/dvd is not recognized.

    Anyone know what I can do now? Please help :)

    Friend Kim

    Hey,.

    What model of laptop you have exactly?

    Normally, you can boot from the recovery disk Toshiba if enter you the BIOS boot menu, and then select the CD/DVD drive as a boot device. Then press ENTER and that the computer starts from the disk. Key combinations that you mentioned as F8, c, etc. doesn't work, they are for HARD drive recovery.

    > It seems also that the cd/dvd is not recognized
    The drive is recognized in the BIOS?

  • Win7 won't start plus-HP Pavilion dv7-6b32us

    My HP dv7-6b32us frozen on me this morning.  The last two days, it was slow.  I used the power button to shut down physically, and when I tried to start it up, I was given the choice:

    Start the reboot system (recommended)

    Start Windows normally

    When I choose the Startup Repair, I have this message:

    Microsoft < R > Windows Script Host Version 5.8
    Copyright < C > Microsoft Corporation. All rights reserved.

    REM model:
    Legend of the REM: WDC WD6400BPVT - 60HXZT3 ATA Device
    REM DeviceID: \\.\PHYSICALDRIVE0
    REM SCSIBus: 0
    REM SCSIPort: 0
    Scores of REM: 4
    REM PNPDeviceID: IDE\DISKDISKWDC_ WD6400BPVT - 60HXZT3___01.01A01\5 & F795EE & 0 & 0.0.0
    REM
    REM
    REM [RESULT]
    REM couldn't Scout because could not detect 2 hard drives on this system

    C:\System.sav\util\MBRINST. / Ini EXE C:\System .sav\util\MBR. INI/U/Q
    ECHO MBRInst returned %ERRORLEVEL% > > C:\system.sav\logs\MBRINST. JOURNAL


    When I start windows normally, he returned to the screen with 2 choices.

    I tried to start Windows normally and you press F8 to try opening in safe mode.  When trying to open in safe mode, it returns to the

    Start the reboot system (recommended)

    Start Windows normally

    Any ideas on how I could fix this?  I'm not good at troubleshooting but can follow directions.  :-)

    Thank you

    Deb

    Thanks for your reply.  I burned a CD of Win 7 repair my daughter and was able to do a system restore, and I think that everything is fine now!  Phew.  Dodged a bullet because I had neglected to save.  I am all backed up now so if something happens, I won't be as frantic.

    Merry Christmas!

  • Satellite M305 starts plus-ERREUR resource conflict

    Satellite M305-S4910
    The system was the starter on all 3 of the 5th time. Now all I get at startup is:
    ERROR
    -Conflict PCI on the motherboard resources
    Bus: 0a, device: 01, function: 00
    ERROR
    -Conflict PCI on the motherboard resources
    Bus: 0a, device: 01, function: 02
    ERROR
    -Conflict PCI on the motherboard resources
    Bus: 0a, device: 01, function: 03

    Press to resume, installation

    I change what I can in the BIOS setup and no luck. I removed the motherboard wireless card and the hard disk, no boot. The worm of BIOS is 2.70, I want to update the BIOS to see if it will fix the problem, but cannot get past the error screen. This can be corrected?

    To be honest, it looks like to me a motherboard problem.
    The error says something about conflict PCI on the motherboard.
    I guess that this is related to certain components of the motherboard

    You want to update the BIOS?
    Hmm not sure if you could do that to be honest I put t think that this problem could be solved by upgrading the BIOS because it looks more like a hardware problem.

  • won't start plus-nouveau windows 7 Home premium - missing the name of the product, config, ser #, product #.

    problem at startup - lack of prod. name, number, config, & ser. #. Had messages windows is not genuine, bought another windows 7 Home premium & installed. Same message indicating the lack of information, does not start correctly

    Hello

    To resolve this issue, contact with CV. How all the information here (just choose your country).

  • Question of the animation to boot Windows on Satellite L50-A-1F2

    Hi guys,.

    I installed Linux on my Satellite L50-A-1F2, and now when I start Windows, after the grub is sometimes very good, sometimes I see the stripes, or the Windows boot animation biased... sometimes, like now, I see the image of grub instead of the classic Windows logo. Everything works fine, Windows loading perfectly... but if anyone can solve this problem that makes me happy.

    Thank you! Sorry for my English!

    Hello

    I think that your problem is a gesture of challenge related to the Linux installed.
    Probably, Boot Manager Windows 8.1 has been replaced by GRUB in Linux and that's why the start-up procedure search differently.

    I have no solution for you, but recommend you to check a few FAQ and HowTo to configure GRUB

  • Satellite L50 - A - 1 7 does not start

    A month or 2 ago, I had the same problem. I feel that I can go anywhere with my problem so here is my last hope.

    So first of all, there is a moment that I was using my laptop Toshiba L50 - has - 1 7 during the evening. I put on the mode 'sleep', lay on the ground and go to sleep. The next morning, I decided to use my laptop again, but it wouldn't start. The single LED light that worked was that it was the battery being fed or whatever. Done quite some research and I wanted to disconnect the battery of my laptop but I discovered that the battery is supposed to stay connected. Instead, there is a switch force or something. I just have to go in there with a needle, click and hold the button for 30 - seconds-ish and it would be identical to unload my PC or something else.

    I tried, but nothing happ-ERA and I contacted the online store where I ordered it to help. They have not really give any useful information and I was getting enough. They do not have help me to think about the problem, they just kept saying that I had to return it. I asked how long it would take and if I lose files. They said there is a chance of losing files and it would take more than 3 weeks. I can't really lose my cell phone for more than 5 days! It's quite a disaster because I need every day my laptop.

    In the morning, after that I decided to retry the stop switch to force thingy. I held the Start button and after a 10 - ish seconds there once again. All current progress was saved, and it was as if nothing had happ-ERA since then. I still had on the browsers and file op - en. Quite a miracle and a lot of luck involved. I don't like not how, but this worked so I stopped looking for answers. A day later, the same thing happ-ERA again. But this time, I just closed and ERP - ERA my laptop. This triggered somehow it of sleepmode and it worked again. So that's what I kept the past month. Some days, that I had to reboot my pc for updates but then I just clicked restart instead of shutdown down.

    Now, today I had to go and he gave me a typical firewall error when in the game so I decided to shut it down (for the first time since I had these problems). I come back home and I have the same problem again... Now I have even more scared that it won't start because it is now completely off and no "standby mode". I tried o-p-e-n-i-n-g my laptop once again, by using the switch to stop, but it did not help to get started.

    Hi Sil22

    I'm scared of m that this awakening / power on the subject indicate that there is a serious problem with the material.
    As you mentioned in your post, force to shut down the unit should help to stop/Reset of the laptop where it is hung.

    But as I understand the question, the laptop has been turned on properly and probably in this case this switch would not be very.
    I m not very good if you will be able to solve this problem without the help of additional service.
    In the worst case I recommend you contact Toshiba ASP (authorized in your country service provider) in order to check the laptop for possible hardware malfunction.
    All FSA available worldwide could be found here: http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/

    But you issue:
    Even if you have already tried the force stop switch I recommend checking of workaround steps once more:
    Disconnect the power adapter and use a an object from sliding into the hole to support the force stop switch. Please hold switch 10 sec long.
    Then you must also press on and press and hold the power for 30 seconds about

    After that, connect the AC adapter and check if the power light is on.
    If it s ON, then it means that the power supply is provided correctly to the laptop.
    Now press power button again to power the unit in place.

    If it works, well, then I recommend you update the BIOS of your laptop.
    The latest version of the BIOS can be downloaded here:
    http://www.Toshiba.EU/innovation/download_drivers_bios.jsp
    Choose the Satellite L50 PSKK6E
    Also Windows system should be updated to the latest state!

    Where workaround is not helpful, I recommend using ASP.

  • My Satellite L50 - A - 1 7 no longer works

    Just some time ago, I was playing a game with friends, but all of a sudden my screen freezes and the sound. Pressing the powerbutton or now in did nothing. Only, I opened my Toshiba Satellite L50 - A - 1 7 and disconnected the battery because it has not turned off.

    It does not start anymore!
    Can someone help me soon?

    Thanks for the comments.
    It would be interesting to know if the problem will happen again if you use RAM in the first place again.

    Anyway, the key is that everything is working OK again.

  • New Satellite L50-A-1This starts with black screen

    Hello

    I turned on my brand-new Satellite L50-A-1This for the first yesterday set it up which worked like a charm. Today, as I tried to turn it on for the second time, the screen wouldn't come. Although you can hear the snoring treatment unit and also to see the cursor, the screen remains black.

    Any ideas on what is wrong and how to fix it would be greatly appreciated.

    Thank you, c

    When you start your laptop you see Toshiba welcome screen or it's dark all the time?

    It's really not easy to say what the problem is here. Try please to start and press function F4 or FN + F4 key to ensure that it is not defined for output to an external monitor.

  • Satellite L50-C-215: failure to install Win7 via the USB port, pb and toshiba.bg bug ' workshop

    Satellite L50-c-215 is a laptop sold without optical drive or OS.

    We bought it today.


    Questions:

    -We were told "it is compatible with windows 7", but what a salesman said, everything can be downloaded from the Web from Toshiba site
    -While watching the Web from Toshiba site, a link says 'no system operating inside'. Link is corrupt
    -2 "official" companies are listed for the Bulgarian Web from Toshiba site are wrong: nobody told on the phone that they are not official support from Toshiba


    Technical questions:

    -J' tried to put several Windows 7 ISO on a USB key, using the official Microsoft tool and Rufus, but I got error that says "CD/DVD Driver is missing."
    -In some forums, it is said that test the spirit of the thing that a USB 2.0 can solve if USB 3.0 will fail. Each USB failed.

    Sales question:

    -Although the European commercial law says people have a little more time to restore a non-working product and be reimbursed, when we returned to the computer at the Technopolis shop a few hours after the purchase, employees told us ' problem is not hardware: we do not cancel the sale, we can take over the computer and give your money. " "Problem is software: see with Toshiba.
    The best we could get was the address of a computer service non-Toshiba to try to ask if they might be able to install Windows 7


    I already spent half a day working on it
    What can we do to install Windows 7 or get the computer returned and refunded?

    Tried Tnings at night:

    -> Intall Ubuntu 12.04: card WiFi can't work, no Ethernet cable to update from the Internet

    The drivers are on the website of Intel, but solution install require packages to download on the internet, not USB

    -> Last Debian version: error starting in the command line

    -> 14.04 installed, Ubuntu box checked during installation to use the Intel Wifi device
    Re: software WiFi cannot connect. Spent a few hours on forums to try to understand how to install the Intel USB drivers. Does not work.

    For people who want to buy this model, try to get a player of optical disk to install Windows, a good cable to Linux, update or be prepared to spend time and money for the service simply be able to use the computer.

    Oh, another thing: Technopolis company is not able to provide you with enough information before buying a product. I will not say that they rip off, but almost: especially to overseas buyers, buy refusal refund to anyone who is not able to have an argument that was screaming in Bulgarian with them.

Maybe you are looking for