Satellite L50 - A-1 DG: according to the colors, lighting changes automatically

Similar Questions

• I have windows 7, my HP deskjet printer does not print the colors I changed to another laptop with win 7 = no colors which, in windows 7 64 cause3s this

  I have windows 7, my HP deskjet printer does not print the colors I changed to another laptop with win 7 = no colors which, in windows 7 64 cause3s this

  Display uppercase makes reading difficult.

  Have you checked the printer properties settings?

  It could also be due to a problem with ink cartridge

  Used HP diagnostics or printed the test page for HP?

  Its nothing to do with win7 the printer settings are taken from the printer to the driver

• Satellite L50 - B fan works even if the CPU load is very low

  I recently bought a Satellite L50 - B and I made a Windows 10 updated. The problem is that the fan works even if the CPU load is very low and the noise bothers me a lot.
  I ordered the video card driver and the system tells methat driver is updated to the latest version.
  I don't know what I can do to change this sad situation.
  Please, please, could you help me solve the problem?
  Thank you very much for your support and understanding.
  I await your quick response.
  Thank you.
  Giovanni Spina

  What CPU temp? Probably overheating?
  Try to replace the thermal interface on the CPU. ;-)

• Satellite L50 - Win 8.1 - passage of the CSM in UEFI?

  Hi guys.

  Yesterday, I upgraded my Toshiba Satellite L50 with an SSD.
  I installed windows 8.1 and everything seems to be ok... except a little thing...

  When I booted the usb to install windows 8.1 my bios has been installed in the CSM (because I read that if I were to UEFI, usb would be not be started) and now if I try to go to the UEFI pc cannot find the ssd drive and says something like "Reboot and select the right device.
  (I already tried with secure boot eneabled one and off the two but it's the same)

  At the moment I am active CSM with AHCI mode... What can I do to switch in uefi?

  Thanks in advance.

  Good news... Thanks for the feedback: spennacchione

• Satellite P850/P855 - How can I disable the trackpad light?

  Hello

  I recently bought the laptop model mentioned on the title, and I would like to know how do I completely disable the light of the trackpad.

  By disabling the trackpad lights up and even if I go to
  -> Synaptics Poinitng device-> device-> internal pointing device Settinngs disable when external USB pointing device is attached the light remains active.

  Is it possible to turn it off, no matter if the trackpad is on / off?

  Thanks in advance

  Hello

  Do you want to disable only the light or feature full touchpad?

  To disable and enable the use of the FN + F5 (or just F5) touchpad keys

• in the cell indicator digital table according to the color value

  Is it possible to change the color of text in individual cells of a digital display indicator depends on the value of the digital displayed in this cell.

  You can use the ListBox instead of indicators in table. You can change the ownership of each cell individually.

• HP laptop: color of half of the screen is changed automatically. Photos, videos and document are not visible

  Half of the screen color has changed. Visual problem to watch videos, read documents

  Hi @manendra1,
  
  Please become a member of the HP's Support Forums. I understand that you have a problem with a part of the screen changes color. I'll be happy to help you.

  Please post the complete product and the operating system on your computer. Check out the following, if you need assistance with this information.
  How can I find my model number or product number?
  Is the Version of Windows on my computer 32-bit or 64-bit?
  
  Will you please get back to me with the information above, so I can help you better.

• The mouse cursor changes automatically.

  Hello forum,.

  When the windows start go to control panel-> mouse control, select the pointers tab. By default, it will be "Windows Aero (System scheme)". But I am using 22 "Widescreen Monitor so that the pointer is small for the screen, then I changed it to" Windows Aero (Extra large)(System Scheme). But whenever I restart the system it is automatically replaced by 'Windows Aero (System scheme)'.

  Hello

  Now it works very well... But after installing I had some problem but it is automatically sort out...

  Thank you

• Follow the colors of changes does not when the story contains table

  Can anyone reproduce this problem/bug, or let me know if it's just my machine?

  Steps to reproduce

  1. Make sure that your Edit > Preferences > story editor a non-black text colors defined for the text added, deletedand moved text.
  2. Create the document and draw a text box
  3. Inside the text box, right click > fill with placeholder text
  4. With the cursor in the text box, turn on track changes and changes to show the range of track changes :
     
  5. Open the story editor with Ctrl/Cmd-Y
  6. Cut and paste, delete and insert a text.
  7. Confirm the colors appear in story editor as defined in step 1:
     
  8. Now insert a table anywhere in the history. For me, all (bg fine rest) non-black text coloring disappears:
     

  Is this a bug in InDesign, or do something that I experience on my own machine? I was able to reproduce the issue in InDesign CS6, CC InDesign and InCopy CC on my Win7 Pro 64-bit machine.

  I would recommend the filing of a bug here report to ensure it is reported:

  Adobe - feature request/Bug Report Form

• Why the menu items change automatically?

  As I'm changed some stuff around on my test Business Catalyst site, I noticed that if I change the URL of a given page (I've changed the 'Shop' page to / sponsor), the menu item URL has not changed automatically. I don't even know the name of it has changed (I can understand as a 'function'). I thought it was a reason to use a CMS like this, that a lot of things like link exchange occur automatically. I'm sure other CMS like Drupal and Joomla do this automatically. There are chances that this will change in the future? Or maybe there is a reason why it's like that I forget?

  Thank you!

  Hi umiwangu,

  In my experience with BC as well as other systems, it is important to note that the pages and menu items are separated from each other.

  When a user creates a page it is not automatically added to a menu. Similarly, when a user changes the URL of a page that has been added to a menu, the menu item URL in question not is not updated automatically.

  So, if you changed a URL of the page that ends by "/ shop" to "/ sponsor ' you should be able to easily view this new URL in a browser. However, if you want the menu item that is linked to the old URL to reflect the new URL, then you will need to change the URL of item of the menu so they can talk to each other in the future.

  Yes, it's an extra step (crucial) update your menu items, but (in my experience) URL decisions are not something that is changed frequently - especially when it comes to SEO.

  In any case, I hope it helps! -Alex

  PS - If you haven't already, you can check zero to hero of gurus of the BC. They put together a huge set of training Sessions of BC (FREE) that are amazing!

• Satellite Pro M40x-115: how to get the color seen on TV?

  Hello

  I would like to use my laptop (satellite pro M40x-115) as a DVD player. But when I connect my laptop to my TV, I get only a black and white display. I tried to solve this problem by installing the latest driver for my graphics card but it has not changed at all.

  How can I solve this?

  Greetz El Mariachi

  Hello

  Have you checked the graphics settings? The settings of the TV must be set to PAL (most of Europe).
  In addition, you should check your TV device if it s can receive the S-video signal.

  Check this: http://forum.digital-digest.com/showthread.php?t=2353&page=1&pp=15

  Good bye

• Satellite A10: Is it possible to upgrade the processor without changing all the other components

  I wonder if anyone might know if it is possible to update by Satellite A10 CPU without changing other components. The laptop has CPU Celeron [R] 2.50 GHz 2.49 GHz, 752MB of RAM.

  Hello

  If you look at the technical side, then it s surely possible.

  But I can say such things why not:

  -performance you earn is based on the costs you have marginal
  -you lose your warranty if you open your machine and you want to dare the revocation of your warranty?
  -the cooling system is aligned to your CPU, in addition, you will need to write such things as CPU microcode. If the tools to write this weird firmware are available for toshiba technicians and not us :(

  I have tried several times with all my toshis and believe me: lose money and be disappointed is a very pleasant pastime :)

  Welcome them

• Satellite A500 - 1 2 - where to find the log of changes to the BIOS v1.50

  Hello

  Where can I find changelog for the new bios version 1.50?

  Anyone had problems with this bios?
  Laptop mine (A500 1 2) has version 1.20 and I'm considering if it is interesting to be upgraded because that something works very well (perhaps fan may run a little slower because it works almoust always to 63%).

  Mazu

  Hello

  I didn't find the change log or details about the version of the BIOS on Toshiba pilot European page, but I found some details on the Toshiba page we
  Maybe you should check it.

  And Yes, I think that fans will run smoothly after the update of the BIOS to v.1.50
  I read a few threads here concerning the noise A500 and fan and it seems that the update of the BIOS should help.

  Welcome them

• According to the browser font changes

  Site built must with Verdana defined as fonts throughout the site, but the police changes depending on the browser used.  Help!

  Verdana is a 'web safe '. The notion of a 'web safe' font is a bit inappropriate. A web safe font is actually a list of fonts.

  

  The ToolTip that appears when you hover over "Verdana" in the list of Safe Web fonts shows the policies 'rescue' or the 'font stack' associated with this web security police.

  The idea with secure web fonts must choose will use the fonts that visitors to your site can be found on the majority of computers, devices and versions of operating systems. However, without a font is on 100% of all computers and devices. When "Verdana" is not on the particular visitor's computer, or the device of the browser will be 'rescue' to Tahoma. If Tahoma is not available, it will be help in Geneva. If this is not available, it will ask the browser to select a sans serif font.

  Even if Verdana is available on the visitor's computer or device, it cannot be the same version of Verdana you use (and therefore can have measures of subtly different fonts and line breaks so different). Even if it is the same font, the layout breaks and the line of text may still vary to a browser due to the subtle differences in text layout engines in each browser. Where the font is not available at all and the browser must relief appearance to a different font, and the layout of the text will be significantly different.

  For the display of more coherent policies (although always with some variation of browser and OS operating system browser) and live text in the browser, use Web fonts. Click on the option 'Add Web fonts' in the menu fonts and add Web fonts to your menu. These fonts are automatically downloaded from Typekit to the computer or device used by a visitor to the site, so the same font is always used. (However, made and differences of line break will be produced again due to differences between the browsers and operating systems.)

  Another, although usually less desirable option is to use system fonts. When a system font is used Muse converts the text block to an image. This leads to slower page load times, but where a specific font should absolutely be used, it may be the only alternative. Muse automatically generates 'alt text' for the image so that the original text is always there for the search engines to index and screen readers to read, but the user will be unable to select or search the text on the page in the browser.

  The idea with web fonts secure is to choose fonts that are on the majority of computers, devices and versions of operating system of your site visitors should be used, but not a font is 100% of all devices. When "Verdana" is not on the particular visitor's computer, or the device of the browser will be 'rescue' to Tahoma. If Tahoma is not available, it will be help in Geneva. If this is not available, it will ask the browser to select a sans serif font.

  Even if Verdana is available on the visitor's computer or device, it cannot be the same version of the font you use (and therefore can have subtly different font metrics). Even if it's the same police, the layout of the text and line break can vary from a browser to a browser due to the subtle differences in text layout engines in each browser. Where the font is not available at all and the browser must relief appearance to a different font, and the layout of the text will be significantly different.

• Get the button to change automatically after the structure of the case is completed once.

  Hi all

  The purpose of this VI (which I lightened it for the purpose of the present) is to do nothing until the START button is true. Then the structure of the case, and the string will be sent to the MSH. I need this too such that the stop command can be sent at any time and will be sent when the STOP button is true.

  At the present time, nothing happens until the BEGINNING is true, then the case structure begins and ends inside while loop. BUT then the outer while loop restarts again and the inside of a cheek through which returns once again the order of the string to the MSH (an unwanted process) because the START button is always true.

  Is there a way to get the start button to return to a State of false once inside while the loop is over?

  (Other solutions giving the same result would be very appreciated also!)

  BBRO says:

  The purpose of this VI (which I lightened it for the purpose of the present) is to do nothing until the START button is true.

  Well, your code sends a command to stop immediately after starting the program while consuming all CPU running the inner loop in parallel as fast as the computer allows. (Since there is no dependence on the data, the inner loop and the stop code both run at the same time. LabVIEW does NOT run left to right!).

  All you probably need is a simple while loop, a structure of the event with three cases and all the buttons in the action of locking.

  See attached a simple change, LabVIEW 9.0.

  (And please don't maximise front panel and diagram for full screen, especially if there isn't much here.) Sometimes we want to work on other things at the same time, for example to write this response!)