Satellite L50 - A - 14 M - Toshiba pc health monitor does not work

Similar Questions

• Satellite L50 - C - 1 L 2 - USB 3.0 does not work correctly

  Hi, the new Satellite L50 - C - 1 L 2 has maybe a problem of USB 3.0. All the componetens that I connect to USB 2 works correctly. But some of these plugged into USB 3 doesn't work. A driver from Microsoft for USB 3.0 extensible Hostcontrolller v 1.0 is installed, no more. I cannot find any USB 3.0 driver in collection of driver of Toshiba. What can I do? They are a special USB 3.0 driver?

  Greetings, Michael

  im not toshiba but tell me how you know that your usb sata 3 do not work, you should have a usb 2.0 port and two usb 3.0 ports, if you use the usb 2.0 to usb 3.0 port device you will get only 2.0 speeds. USB 3.0 is backward compatible with usb 2.0 even peripheral id usb 3.0 according to manufacturer and specs of the device and how to use it. lets say spec is of high quality and again then you transfer files small speed should be fast that belong to 3.0 speeds but if you transfer large files then your currency becomes warm or hot and gets corrupted performance speeds down you can even get up to usb 2.0 speed and maybe that's why you think that your USB 3.0 ports do not work correctly , I hope that its clear things that worry you.

• Re: TOSHIBA PC Health Monitor will not open / work (A500 - 17 X)

  Hello

  My PC Health Monitor does not open, I searched however found no drivers for the PC Health Monitor for the A500-17 x is there a way I can make it work?

  See you soon!

  SuperDan89

  Hello

  Go to the [European Toshiba driver Page | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]

  and download Pc health monitor utility for your model. Uninstall the previous and install new downloaded one

• Toshiba Recovery Disc Creator does not work on my Satellite P300

  Hello

  I need to make my drive recovery for my Satellite P300 (PSPCCA-05V01Y), but the Toshiba Recovery Disc Creator does not work, as it is said that it is not a file on the pc HARD drive recovery.
  I tried before, and he had a problem with the core files, saying he was corrupt.
  So I was wondering if there is in any case I can download the installation of HARD drive recovery so that I can install and put it back to "factory condition" and reburn the recovery disk?
  Cheers for any help
  Mikey

  Hello Mikey

  The situation is quite complicated. When you've got your laptop recovery files was recorded on the second partition in folder HDDRecovery. The second partition and backup files should not be modified.

  If you did something with the second partition or this file recovery Toshiba creator cannot find these files and the recovery media cannot be created. This will work with the factory only settings. but I see another problem there.
  Theoretically, you can now install new OS using the installation procedure of recovery HARD drive and with factory State, you should be able to create DVDs, but if the Toshiba Recovery creator can not find the files I'm afraid that the installation of HARD drive recovery can have the same problem.

  If you want you can test. Try to start the installation of HARD drive recovery.

• Satellite C50D-- Toshiba PC Health Monitor - can not get the type of Bios

  I've updated my Satelite C50D-A Windows 10 laptop that works very well.
  However, when I try to check Toshiba PC Health Monitor in hidden icons, it is a small box that appears who says: 'impossible to obtain the type of Bios' and the application goes no further.

  Y at - it a fix for this make health monitor work again?

  Concerning
  Roger

  Hello

  Update you the software Toshiba after the Win10 upgrade?
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

  The Toshiba Health Monitor and other software like system TOSHIBA driver should be updated to compatible version Win 10

• Satellite A0302 C50D and Ubuntu 12.04.4 - touchpad does not work so well

  I have a Satellite C50D-A0302, PSCGWF part number.
  I use Ubuntu 12.04.4 LTS Pangolin specific to this topic, but the touchpad does not work so well.

  How can I get the right drivers for the touchpad?

  How do I know if the touchpad is Synaptics or ALPS, so I can get the correct drivers?

  Thank you!

  As you probably know Toshiba does not support Linux and does not offer Linux drivers.
  All about you Googling can find many Linux forums. Try to find useful information here. I mean you can exchange your experiences with other people who are fans of Linux and experts, so I assume that you can get help here.

• Satellite program-112 P775: HDMI connection to the TV does not work

  Hello

  For some reason that the HDMI connection between my Toshiba Satellite P775 program-112 to LG TV no longer although he did for some time.

  I tried another laptop without problem.

  I posted the same question some time ago and told to press the Fn and F5 keys, but it did not work.

  Any suggestions please?

  You are right: the FN + F5 switches between the internal and external video output.

  What exactly happens when you press FN + F5? A map falsh menu appears on the screen when you use this key combination?

  On the page of the Toshiba UE driver you can find the Manager command HDMI. This driver is required for your HDMI controller.
  In the case where the output to HDMI does not work, try reinstalling the driver

• Satellite U400-12F: LED power button & HDD protector tool does not work

  Hello

  I have a Satellite U400-12F and I bought a Vista Ultimate.
  After you have installed all the drivers and Toshiba of the corect order downloads, the button to turn on the power lights does not work.

  And I tried to install HDD protection Utility but the installer returned an error like 'cannot be installed on this model.
  Do you know why these problems?

  Thank you very much
  concerning
  Daniel

  > After installing all the drivers and software of Toshiba by order, the button to turn on the power switch lights does not work.
  Please check the BIOS settings. As I m not wrong not it takes an option called LED illumination or something like that. There you can turn on and off.
  Also, try to customize the special button of TOSHIBA using the Toshiba control utility.
  There are also some useful options.
  But to be honest I n not know exactly if this button doesn't work with Win XP. Maybe this feature is not available in XP.

  > I tried to install HDD protection Utility but the installer returned an error like 'cannot be installed on this model.
  This error message appears if you try to install a tool that was not designed for this series of laptop.
  The U400-12F seems to belong to the PSU40E. Check if it s a good tool.

• Satellite 1900-803: Hi-Speed USB 2.0 card does not work

  I have a portable satellite 1900-803. I recently bought and installed a Belkin Hi-Speed USB 2.0 Notebook Card, but it does not work. Manual of the card says that after the successful installation, I'd see a second 'USB bus controllers' heading which I did not. I even it was replaced by another one thinking that there could be some problems with the drivers, but it still does not work. whenever I plug in a device such as an mp3 player, a digital camera or a usb storage device, windows locks all of a sudden upward, won't move the cursor, the function ctrl-alt-del does not work and the worst of it, I can't turn off the machine!

  the map shows that it runs on any 32-bit location.

  I have the manual and the Device Manager to see if mine is a 32-bit, but I don't really know. This is probably the reason why it doesn't work? or is there another reason to make it work not? If this is the reason why, is there a way where I can upgrade my laptop's pc card slot to make it work?

  Help, please.

  I posted this question yesterday morning and did not get a single response. is it because it has to do with an older laptop? Please, someone, help...

  Post edited by: wes0702

  Hello

  Have you checked the Bios? I guess that the Bios Toshiba was preinstalled on your laptop. Am I wrong? There should be an option to change the PC Card controller mode.

  Here, you can change the mode of the automatic selection, CCIP compatible controller or card bus/16-bit.
  If the card supports 32-bit so you should use the 16-bit option.

  I think you should play a little with this option and possibly that the card will work.

• Satellite L305D-S5895 - keys to functions and the wifi does not work with Win XP

  Hello

  first sorry for my English

  I bought a Toshiba Satellite l305d s5895, with Windows XP, I need a software, but the function keys does not work.
  So I need a driver, but I can't, and wireless internet does not work.

  > Where could it find special XP BIOS?
  In my opinion, there is problem because most threads here are on the European laptop models. then come to question United States. Toshiba Europe and Toshiba U.S. do not work together and each of them is responsible for own models and provide support for specific country notebooks models.

  For most models, so here in Europe Toshiba has offered two BIOS. We were already on the delivered Vista laptops. The Toshiba page download available BIOS for Windows XP Home edition. in most cases, it was version 5. XX and this BIOS was designed to support public services and specific tools of Toshiba. For example, all the FN key features was only available with this BIOS WXP.

  So if any of you have laptop model US they would see how the solution with Toshiba U.S. or US forum under http://community.compuserve.com/n/pfx/forum.aspx?webtag=ws-laptop&redirCnt=1

  Bye and good luck!

• Satellite A60-202 after bad BIOS updated the PC does not work

  Hello

  After a very bad my BIOS update, my PC doesn't work and doesn't turn on.
  What to do now?
  It is Toshiba Satellite A60-202 with 512 MB of memory and 40 GB of HD.
  model PSA60E-OLP06TFR SA60-202

  Thank you

  Yves

  HI Yves,

  Unfortunately, if the BIOS update procedure does not work (or fill), then it is likely that the BIOS in the CMOS chip had been corrupt and without it, you will not be able to boot your laptop to fix the problem.

  It will be necessary to bring (or send) your laptop to a repairer authorized to have reflashed BIOS.

  Kind regards

• Satellite P500 - after update BIOS on the numeric keypad does not work anymore

  I just had a Satellite P500 and am running Windows 7. I downloaded all the latest drivers and updated the system BIOS to version 1.70 (from Toshiba support website). Now, my numeric keypad of the keyboard does not work.

  The NumLock light is on and when I hit the key "6" on the pavement, he turns the power light, but the behavior of the other keys does not change that it is on or off. The '-' key to enter a '6', but none of the other keys (except "enter" does nothing.

  I removed the keyboard driver and rebooted to reinstall the keyboard driver, but has no effect. The keyboard has worked for a few days after that I flashed the bios but seems to have stopped since I started using a USB mouse. I tried to uninstall the USB mouse driver, but who have nothing do either (it was a Logitech driver).

  Anyone have any ideas? Thanks in advance

  > I did not upgrade bios 1.7
  Maybe you should try upgrading the BIOS
  As another user has suggested upgrading the BIOS 1.7 helped, even if the end user has updated the BIOS twice

• Satellite X 200: A single button to control media does not work

  OK, I have this problem. 6 media buttons that I have on my X 200 does not work correctly.
  The first 5 buttons work OK, but nr 6 the next for media player etc button does not work, nor with WMP or mediamonkey.

  How can I fix?

  Chris

  Thanks for the info.
  To my knowledge the Toshiba control buttons work that with windows media player if audio CD has been inserted. If you watch DVDs, you can use these buttons with the WinDVD software.

• Toshiba 40TL838 - sleep timer does not work or works sometimes

  Hello

  I bought 40TL838 TV
  and I have problem with sleep clock

  does not work or works sometimes
  but usually, you see on the screen a minute left and TV never turn off

  I try to change the language and also options the system reset does not help

  and updated firmware is up to date

  any suggestion or help please

  I do not know if you are on the right forum because this forum is for Toshiba computers but let's see if anyone with the same device can help m.

  I put t know what the problem is here, but how it works you can read on page 48 in manuals s document.

  By the way: have you tried to contact Toshiba hotline and ask for help?

• Toshiba 39L4333DG: DLNA almost does not work

  Hello

  I'm experimenting with my new L4, but I find THAT DLNA almost does not work.
  TV is connected to my router where my NAS is also wired (100 MB switch).

  First of all, to access the directories with more than one material is sloooooooooow.
  It takes minutes to view folders.

  Secondly, it seems that the TV is incapable of making anything: not my audio files in WMA, not my AVI videos or my JPEG files!

  Is this something normal?
  How can I make this work?

  Thank you!!

  > Secondly, it seems that the TV is incapable of making anything: not my audio files in WMA, not my AVI videos or my JPEG files!
  You should check the user 89 manuals page.
  http://www.Toshiba-OM.NET/LCD/PDF/English/L4333-323950-English.PDF

  Here you can find all the details what file formats are supported by using the network connection or a USB interface.

  Only the jpeg image files are supported using the connection network and Media Player.
  Other files of pictures on TV, you can view by using, for example, USB flash memory stick

  About DLNA:
  I think you should check the configuration of the network, as described on page 39