Satellite L50 - B - 1 KG - won't power on

Hello

I can't turn on my Satellite phone (L50 - B - 1 KG) since last night . After a few Win 7 updates, I restart the system as required, but it does not start...
I try to press the power button, but does not change a thing...
Also I've packed on the charger, the LED flashes in orange (charge mode), after a few hours, it's color changed to white (full charge).
Of course I press, during the charge, also once the charging process is complete... but no luck...
Any ideas?
I'll try to take the battery for a few minutes to see what happens...
Did anyone here who has had the same problem / problem? and if yes how was resolved?

Thank you very much!
Ciprian

Advertisement

I will try to take the battery for a few minutes to see what is happening.

...

Hmm... next to the battery, you must unplug the power adapter and should also press and hold the power button / long 40sec.

After this connect the battery and the AC adapter and try to turn on the unit by pressing the power button.

If the laptop is not on, I guess that there must be some kind of hardware problem and I think that the technician should take a look at this unit and run a troubleshooting procedure to get more info on the affected part.

Tags: Toshiba

Similar Questions

  • Toshiba Satellite L50-B-1DJ does not supply power to the top after removing the HARD drive

    Hello world!

    I have a Toshiba Satellite L50-B-1DJ. It has a 750 GB HARD drive, but it wasn't enough for me. So I bought a Toshiba 1 TB HARD drive. I have undone all the screws, carefully (using my driver's license), lifted up the plastic and removed a HARD disk.

    BTW, I really like this plastic solution on the HARD drive!

    Then I realized, that all my stuff is still on it.
    So I put the HARD drive, I'm going to copy everything on my drive hard Ext. planning.
    Well I screwed it back, got the battery, put the back of the AC adapter.

    Battery charge light was on, indicating that the current flows. I pressed the 'Start' button, and nothing happened. He broke yet still nothing. I plugged the battery and the AC output adapter, I held the Power button for 30 seconds, put everything back still nothing. I got scared. Opened back once more, just to take a look at, so anything that slipped on. Nope.

    Everything is a okay. What should do? I have the warranty? I hope not.
    Can I fix myself without void my warranty? I hope so!

    And also: I bought the laptop in Hungary, but I'm in Germany. Can I fix here in case my warranty is valid?

    Thank you very much for your help!

    Sincerely,
    Bertold Juhasz

    PS: As you say that English is not my native language, please don't flip out on my grammar I know it's wrong

    I just took the hard drive out of mine and put it back to see if I could reproduce your problem after trying several times I had no problem.
    Have you checked the pins at the end of the hard drive to see if all are damaged, another that I can't imagine what else.

    ICH habe just die Fliegengitter aus von mir gemacht und wieder, um zu sehen, ob ich das problem nach dem Versuch're mehrmals I had keine zu make a replication problem.
    Haben Sie die pins am Ende der Tiger uberpruft, um zu sehen, wenn eine beschadigt sind, dass ich nicht, except a great denken nichts.

  • Satellite L50 - A - 1 6: "boot loop" at power on

    Hello world.

    I have a Satellite L50 - A - 1 6 (just bought). I changed the HARD drive partitions in order to better utilize the space. Then I tried to create the recovery from the preinstalled recovery partition disk (However this was not changed!), but it did not work. It was posted this message: "the recovery partition was not found.

    So I tried to restore factory settings (as explained in the guide, press '0' at the beginning upward).
    After that, my laptop computer goes into "boot loop", and it continues to go in the boot loop every time I turn it on. The boot loop here is summerized: + logo (leading to innovation) toshiba-> error message (.. .has been detected a problem... etc etc)-> black screen-> logo toshiba (leading to innovation)-> ecc. ECC. +

    The only possible operations are:
    -to power the laptop off (by turn off by pressing the key)
    -to access Bios (by pressing the F2 key)
    but later, the laptop comes back still in boot loop.

    I also tried to set up an order of boot device for the use of tools like "live recovery cd" or similar (also USB)... but nothing... He always goes in the city "boot loop".

    Any suggestion to have the correct start of my laptop?

    Thanks in advance.

    Hello

    >. I changed the HARD drive partitions in order to better utilize the space. Then I tried to create the recovery from the preinstalled recovery partition disk (However this was not changed!), but it did not work. It was posted this message: "the recovery partition was not found.

    This does not surprise me. You have changed the partition table, and therefore the partitions of HARD drive will be more found.

    > So I tried to restore factory settings (as explained in the guide, press '0' at the beginning upward). After that, my laptop computer goes into "boot loop", and it continues to go in the boot loop every time I turn it on. The boot loop is summerized here: logo (leading to innovation) toshiba-> error message (.. .has been detected a problem... etc etc)-> black screen-> logo toshiba (leading to innovation)-> ecc. ECC.

    This does not work for the reason that I mentioned above. The disk HARD recovery isn't possible now!

    I recommend you to use stop force switch:
    http://APS2.toshiba-tro.de/KB0/TSB3C03JR0000R01.htm

  • Satellite L50 - B - 14 M completely dead - no power not on

    Hi all

    I am now the proud owner of a Toshiba Satellite L50 B 14 M, since a few days it serves not on at all. When it is pressed the button at the top right (even for al longer) nothing happens, not even a little noise or a flash of light. He remains completely dead and will not turn on at all. Haven't tried with adapter connected / not connected / without battery still no change. The laptop was not abandoned or in a hurry or anything strange I just pressed the power button to continue working on it.

    Tips / advice is much appreciated! Best regards, Jan

    Hello

    It's really not easy to say what may be wrong with that. Unplug the AC adapter / CC, remove the battery and press the power button for about 20 seconds. After doing this leave for a while and connect the power supply only.

    DC in / battery indicator lit?
    What happens when you press the button walk / stop? Is there a reaction?

  • Satellite L50-A-111 - 0% battery power

    Hello.

    Today while playing a game my Toshiba Satellite L50-A-111 stops and when I turned it back on, I closed the game and on the desktop, I noticed that the battery was at 0%, I checked the AC and everything was connected and after one minute it off again. So after a few attempts, I noticed that the latter always follows this behavior:

    1. when I turn on it return _with HQ power on_, the battery is at 0% available (plugged in, does not support) and _it will stay 5-minutes_ and just before turns out it will change in (plugged in, load) for like 15 seconds and then turns off.

    2. at the time unaware of _it the "DC IN / battery indicator ' is white (indicates the AC adapter is connected and the)
    battery is fully charged.) 5 minutes and again for 15 seconds, it will change to amber (indicates the AC adapter is plugged in and the battery is being charged) and he repeats this behavior in the cycles of 5 minutes.

    3 and this is the most bizarre situation, when I turn it back _with ignore AC power, the battery is at 0% and it stays on until it's really discharge the battery (I only did once)

    What I ve try:
    change management the power to never turn off the power/sleep, did not.
    Uninstall "Microsoft compatible battery ACPI Control method" and install it again (did not work)

    I did not remove/replace the battery because I'm afraid of messed up, and I don't really know who will solve the problem.

    Do you know what the problem is or what I can do to keep after more than 5 minutes?

    Thank you in advance.

    Hmmmmmm... It is not easy to say what the problem is. I don't know if this can somehow help but try to reset your machine. How do models with main battery sets, which you can read on http://aps2.toshiba-tro.de/kb0/TSB3C03JR0000R01.htm

    Problem is that these questions can be tested with additional drums on most of the models of laptop but unfortunately your machine has set the main battery. If the problem will always be there do not open your machine. What you can do is to contact the nearest Toshiba service provider in your country, to explain the situation and ask for help.

  • Satellite L50 - A - 1 c 7 won't start plus-erreur 0xc0000225

    Hello

    I had a 128 GB ssd in my laptop (hard disk enclosure) and 1 TB of toshiba hard drive but now I got a new pc and the ssd's in the Office
    now I want to reinstall windows on my laptop but I still have this error 0xc0000225

    I have the recovery cd and a bootable usb key but even when I change the boot order, that I continue to have this error, there is also an option to press f8 but when I do this the screen flashes

    can someone help me?

    laptop: toshiba satellite l50 - a - 1 c 7

    now, I've discovered that my hard drive (it came with my laptop) was originally

    now I have just an ssd in my laptop but now I got this screen:

    check for the presence of media
    no media present

    After a time: he transforms:

    Restart and select proper boot device or insert boot media in selected boot device and press a key

    I have a bootable usb key but I can't go into the bios boot device set.
    normally I go in the bios when I Press f4 but nothing happens, then I restart the laptop goes into the bios, but it freezes and cannot do anything about it.

    If anyone can help me?

    Thank you

  • Satellite L50 - A - 1 7 does not start

    A month or 2 ago, I had the same problem. I feel that I can go anywhere with my problem so here is my last hope.

    So first of all, there is a moment that I was using my laptop Toshiba L50 - has - 1 7 during the evening. I put on the mode 'sleep', lay on the ground and go to sleep. The next morning, I decided to use my laptop again, but it wouldn't start. The single LED light that worked was that it was the battery being fed or whatever. Done quite some research and I wanted to disconnect the battery of my laptop but I discovered that the battery is supposed to stay connected. Instead, there is a switch force or something. I just have to go in there with a needle, click and hold the button for 30 - seconds-ish and it would be identical to unload my PC or something else.

    I tried, but nothing happ-ERA and I contacted the online store where I ordered it to help. They have not really give any useful information and I was getting enough. They do not have help me to think about the problem, they just kept saying that I had to return it. I asked how long it would take and if I lose files. They said there is a chance of losing files and it would take more than 3 weeks. I can't really lose my cell phone for more than 5 days! It's quite a disaster because I need every day my laptop.

    In the morning, after that I decided to retry the stop switch to force thingy. I held the Start button and after a 10 - ish seconds there once again. All current progress was saved, and it was as if nothing had happ-ERA since then. I still had on the browsers and file op - en. Quite a miracle and a lot of luck involved. I don't like not how, but this worked so I stopped looking for answers. A day later, the same thing happ-ERA again. But this time, I just closed and ERP - ERA my laptop. This triggered somehow it of sleepmode and it worked again. So that's what I kept the past month. Some days, that I had to reboot my pc for updates but then I just clicked restart instead of shutdown down.

    Now, today I had to go and he gave me a typical firewall error when in the game so I decided to shut it down (for the first time since I had these problems). I come back home and I have the same problem again... Now I have even more scared that it won't start because it is now completely off and no "standby mode". I tried o-p-e-n-i-n-g my laptop once again, by using the switch to stop, but it did not help to get started.

    Hi Sil22

    I'm scared of m that this awakening / power on the subject indicate that there is a serious problem with the material.
    As you mentioned in your post, force to shut down the unit should help to stop/Reset of the laptop where it is hung.

    But as I understand the question, the laptop has been turned on properly and probably in this case this switch would not be very.
    I m not very good if you will be able to solve this problem without the help of additional service.
    In the worst case I recommend you contact Toshiba ASP (authorized in your country service provider) in order to check the laptop for possible hardware malfunction.
    All FSA available worldwide could be found here: http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/

    But you issue:
    Even if you have already tried the force stop switch I recommend checking of workaround steps once more:
    Disconnect the power adapter and use a an object from sliding into the hole to support the force stop switch. Please hold switch 10 sec long.
    Then you must also press on and press and hold the power for 30 seconds about

    After that, connect the AC adapter and check if the power light is on.
    If it s ON, then it means that the power supply is provided correctly to the laptop.
    Now press power button again to power the unit in place.

    If it works, well, then I recommend you update the BIOS of your laptop.
    The latest version of the BIOS can be downloaded here:
    http://www.Toshiba.EU/innovation/download_drivers_bios.jsp
    Choose the Satellite L50 PSKK6E
    Also Windows system should be updated to the latest state!

    Where workaround is not helpful, I recommend using ASP.

  • Satellite L50 - A - 16 Q - problems after upgrade to 8.1 windows

    Hi all

    I have a problem with my Toshiba Satellite L50 - A - 16 Q.

    I decided to update my laptop to Windows 8.1 Win8, unfortunately, it was really bad decision.
    After that my computer is very slow. It takes forever to push the power button to be ready to use browser. Even Chrome does not work correctly. Before the update, my computer was big, fast and stable.

    Is there anyone who had simillar problem? Is it possible to go back to Windows 8 without destroying my C: drive?
    Maybe I should install something more?
    All drivers or another update?

    I just install Win 8.1 update and nvidia drivers graphics.

    Hello

    To be honest, I put t understand the decision to return to Win 8.
    Win 8 contained many bugs that have been fixed with Win 8.1

    Two days ago, I upgraded my new Satellite M50 - A Win Win 8 to 8.1.
    It took some time but finally win 8.1 run on my laptop and its great!

    First of all, you must update the 8 8.1 Win win recommendation of Toshiba:
    Details:
    http://www.Toshiba.EU/innovation/generic/windows8_1-message/
    All Toshiba drivers, utility tools must be updated!

    With regard to the starting time:
    You know the hybrid mode? Default (Win 8) did not stop you probably know other systems like Win 7 offshore. The 8 winning performed the closed hybrid that allows you to boot up the laptop faster. But this has been closed not real mode.

    Here is a good description how toggle this mode:
    http://APS2.toshiba-tro.de/KB0/TSB2B03EY0002R01.htm

  • Satellite L50 - A - 1 5 PSKK6E does not start after upgrading memory

    Upgrade memory L50 - A - 1 5 pskk6e

    I have a memory ddr3 4 gb 1rx8 pc3 - 12800 S-11-12-b2 hynix and I tried to add another memory
    memory DDR3 4 gb 1rx8 hynix pc3 - 12800 S-11-11-b2, but it does not boot up the laptop.

    I tried to mount only the new but it won't start.

    Some ideas?

    I think that it s you already know that this Satellite L50 - has - 1 5 would support max 16 GB of RAM (2 x 8 GB)

    But why, box for computer laptop doesn t is very simple: the new modules are not compatible.

    I found modules recommended by Toshiba.
    These are:
    8GB DDR3L - 1600 PA5104U-1M8G
    4 GB DDR3L - 1600 PA5104U-1M4G

    Both are made of Kingston and the specifications are:

    Memory speed: 1600 Mhz PC3-12800
    Capacity: 8 GB (1x8GB module)
    Pins: 204 SODIMM
    Type of RAM: DDR3 SODIMM
    Verifying the integrity of data: non ECC
    Specifications:
    Latency (CL) CASES: 11
    Voltage: 1.35v

  • Satellite L50 - B - 16 Q - downclock Windows 10 CPU

    Hello world. A few weeks ago I found the problem with my laptop Satellite l50 - b - 16 q. When I use the laptop all right, after sleep/wake up the processor is clocked at 0.8 Ghz isn't serious battery, battery/AC (power saver) balanced mode. Sometimes when the battery is less than 10% (no matter the battery/AC) the CPU count is 0.1 Ghz. After several reboots and the problem of sleep/wake are fixed. Processor is Intel Core i7 4500U.
    It is clean instalation Pro 10, 64-bit Windows. I have worked with before Windows 8.1 and I have no problem.

    I have another problem. When the laptop's power over the time fan speed is max. I cleaned it dust, change of thermal paste and the CPU temperature is 50-65 ° C, but GPU more than 90 ch. video drivers is updated and Windows with latest updates. Any ideas?

    Originally posted by Papercut
    Hello world. A few weeks ago I found the problem with my laptop Satellite l50 - b - 16 q. When I use the laptop all right, after sleep/wake up the processor is clocked at 0.8 Ghz isn't serious battery, battery/AC (power saver) balanced mode. Sometimes when the battery is less than 10% (no matter the battery/AC) the CPU count is 0.1 Ghz. After several reboots and the problem of sleep/wake are fixed. Processor is Intel Core i7 4500U.
    It is clean instalation Pro 10, 64-bit Windows. I have worked with before Windows 8.1 and I have no problem.

    I have another problem. When the laptop's power over the time fan speed is max. I cleaned it dust, change of thermal paste and the CPU temperature is 50-65 ° C, but GPU more than 90 ch. video drivers is updated and Windows with latest updates. Any ideas?

    its gpu is overheating and acceleration prevents your cpu load and speed, have you changed termo glue on video chip you?

  • My Satellite L50 - A - 16 Q turns off suddenly while on battery

    Hello guys and girls,

    I have a problem for some time that I don't really know how to solve.
    In November 2013, I bought in Poland, where I live, a nice TOSHIBA SATELLITE L50 - A Q - 16 (PSKJNE).
    On this computer, even if something is constantly causing me problems: * very often the power stops so that all of a sudden on battery *, even if the 'TOSHIBA PC health monitor' app that monitors the temperature of the processor, also shows no sign of criticality.

    However, there is something going wrong: thanks to this software, I noticed that whenever I unplug the charger, the fan speed is zero, apparently put the endangered cooling system. And I know in the manual that if the temperature of the processor reached a critical threshold, the system stops automatically.

    Anyway is to solve the problem to not stop suddenly, making me lose data then on the battery?
    Maybe turn on the speed of the fan, somehow, so that this mode?

    Thanks to everyone for your contribution, in advance.

    Kind regards

    Matteo

    If you unplug the AC adapter, the system will pass the plant (it depends on the configuration of power plan). Check the Windows power plan settings to see what configuration will be used in battery mode.

    This power plan can be configured and all the settings are located in the advanced power settings.
    I recommend you to check the mode of cooling and if necessary to use the same settings that are used in the power management when the laptop is connected to the power supply.

  • Toshiba Satellite L50 - A battery load but remains at 0%

    Hello!

    For the last two weeks, I had problems with the battery of my Satellite L50.-a. It remains at 0%, although it will load. If I remove the power adapter, the computer continues to operate for a period of time. Now, here's the odd part. If the laptop has been in charge for a while, it stops. If I remove the power adapter it will start again and show always is at 0%, but now it works for about 1.5 hours before the battery is actually empty.

    So I use my laptop without power until it stops, then I charge for a few hours and then it stops and we start over.

    Someone has an idea that I could do to fix this?

    I tried:

    • It loads from one day to the next without using the laptop
    • Several drivers update
    • Disconnect the battery, start with power supply adapter, stop and reconnect the battery

    Hello

    Have you found a solution? I have a similar problem and cannot run the laptop with the power connected.
    I have a warning message that the battery needs to be replaced and if I do that it does not start even if the replacement battery has been charged.

  • Satellite L50-B-1F6 - default bottom right of the screen

    Hello

    I bought a Satellite L50-B-1F6 (Corei7, 4 GB of RAM, 1 TB, IPS FullHD screen).

    The first scratches on the screen near the time of the taskbar.

    So I sent the product to my retailer for an Exchange to a new.
    The new product has been delivered, open to the seller, and we have no scratches.

    So I return the product at home. The House, once I removed the plastic protective film that is around the screen.
    I then discovered another flaw in the bottom right of the screen, was not because of the plastic wrap.

    The surface of the screen and power off and causes unpleasant reflections.
    My dealer doesn't want, because we controlled the entire product.
    I post pictures of defects.

    Do you have also serious about finishing your Satellite, and then I get a refund or exchange of the Toshiba screen.

    [Photos: http://1drv.ms/11P8Hm5]

    According to me, there is no much to do the material is affected and replacement of equipment only made a real option to fix.

    If the dealer doesn t want to replace the product, contact the Toshiba authorized service provider for repair.

    But I m wondering about the dealer of laptop I put t know where you bought this laptop but in my country, each product is guaranteed by a guarantee, and in case of hardware problems, the dealer is forced to solve the problem.

  • Satellite L50-A-160 does not start after the Bios Update

    Hi, first of all, this is first post.

    I have 2 satellite L50-A-160 with bios 1.1

    Problem: seems to go to sleep after a few minutes, even working on them (even with both)

    So, I found an updated version 1.9, downloaded and running on one of the laptops. the biosupdate tool found matching the BIOS and a race.
    In the middle of flashing, he fell asleep. turned on and not start. What can I do? Recovery options? I guess the same thing will happen with the other too...

    What is the problem with these computers?

    Besides; very poor battery, always shows 0% available and not charging...
    Does anyone have a solution?

    Best regards
    -always in the hope.
    GT

    Have you tried to change in Power Options?

    See screenshot and try to change the ones I marked (it can refresh the settings, just change the values) and see if this solves the problem.

    and for the other laptop with no boot, a laptop sleep by updating the bios will surely mess it.

    what I don't understand is why your sleep laptop BIOS update, as far as I know the sleep settings is active then on windows (since this is controlled by windows)
    He does not sleep while in the BIOS you leave 1 year, sleep settings active only after loading windows.

    have you tried to check the time of processor for your laptop? Maybe its overheating causing auto-off

  • Satellite L50 - B - 2 8 flashing screen + driver crash.

    Hi all

    When you work with my L50, sometimes the screen stops (black screen) 1 or 2 seconds and restard right after. Very like, remove power. Sometimes, I get notification that crashed the driver of the screen. The occurs when the power and the battery is almost full.

    I try to install the latest driver for support Tohiba without effects...

    Could you help me.

    Thank you very much
    Philippe

    Sometimes, I get notification that crashed the driver of the screen

    As I'm not mistaken the Satellite L50 - B - 2 8 takes care of two GPU:
    -Intel HD Graphics 5500, which is part of the Intel CPU and
    -AMD ATI Radeon R7 M260 is the external GPU.

    Now, knowing that it would be interesting to know which graphics card driver crashed.
    I mean the laptop can use either the Intel GPU or according to the settings... usually the Intel GPU ATI GPU is used if no application does not work who would need the power of the ATI graphics card... This saves the battery...

    However, its possible to switch between Intel and ATI GPU.

    Some nice youtube videos show step by step detailed instructions how to:
    https://www.YouTube.com/watch?v=DCh9Eob0mNY

Maybe you are looking for