Satellite L50 - B - 1 p 1 connection to an external monitor

Similar Questions

• Satellite Pro L670 - 16Z BSOD after start and an external monitor

  Hello!

  I have a strange problem with two Satellite Pro L670-16Z. I connected to an external monitor. After changing the settings to extend the windows desktop, I rebooted the system.
  Then I gott a blue screen. I disconnected the screen external, nut, this is not enough. The system does not start. I always get a blue screen.
  Systems running Windows XP. I have this with both of them with different external monitors.
  I can boot a BartPe. I did correct the systems yet. The systems are very cool, works only for 14 days.

  Any suggestions?

  Concerning

  Stephan

  Are you using the original recovery image Toshiba WXP?
  Can you start Windows XP Home edition in safe mode?

  The port on which you are using to connect the external monitor?

• MacBook Pro retina 15 inch heats up when it is connected to the external monitor

  Hello

  My problem: When I connect my monitor (LG IPS277L) temperature of my Macbook Pro starts to heat upward. This problem often occurs when I use Facetime.

  I found it really strange because I should have a pretty good Macbook Pro for this.

  MacBook Pro (15 inch, retina, medio 2015)

  Processor: 2.5 GHz Intel Core i7

  Memory: 16 GB 1600 MHz DDR3

  Graphics card: Iris Pro 1536 MB Intel / AMD Radeon R9 M370X

  El Captain 10.11.6 OSX

  I hope that someone recognizes this problem and wants to share their solution.

  When you connect to an external monitor, you use the AMD Chip for graphics (without the external screen, most of the software needs only the graphics engine Intel).  It attracts more power and therefore heats up.  All MacBook Pro for this to some extent.  This should be considered normal.  If the computer is actually overheating, it will stop.

• Tecra A10 - 1LL - connection with the external monitor

  Hello

  I have a problem with my laptop Tecra A10.

  When I connect to an external monitor to the laptop I have to manually switch the screens because external shows nothing. When I disconnect the monitor I have to pass the screens manually with FN + F5 because the internal display shows nothing.

  My old laptop (Tecra A9 (PTS52E-0E702NGR)) is the poster automatically whenever I connected or disconnected an external monitor.

  Anyone has an idea why the A10 light automatically as the old notebook? Maybe it's the only spot in the preferences of the display driver that I don't see right now. :-)

  Hi SilverWizard,

  What happens if you try to switch on the external monitor using the options of display driver, or that this combination of buttons don t work?

  As wrote Al - eX you must update tools from Toshiba to get the keys FN working again. Everything can be downloaded here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  It's working now?

• Yoga 900 - do not wake up to the top of the mode standby mode when it is connected to an external monitor

  Hello world. It's just a message of public service regarding an issue I encountered. I found that my 900 Yoga do not "wake up" after he went to sleep when you are connected to an external monitor.

  I am connected to a HP 27VX monitor by a C of Type USB to HDMI adapter. I found that my Yoga wakes up without problem if the screen is off (power options disable the display settings), but he does not wake up if she gets to sleep when it is connected to the monitor. The question however is not that he don't wake up, the problem is that for some reason when it is connected to the monitor there's going to ever really sleep (slow flashing white light). I think it is the way of somehow when you try to go to sleep. When he enters this mode, the power led is white, and the only solution is power Yoga of the cycle. I don't know why he won't successfully to sleep when it is connected to a monitor, but my guess is a certain type of driver/hardware between the USB type C HDMI adapter and the monitor problem.

  I checked that everything works as designed when I am not connected to the monitor. My solution is to go to power options and turn on my sleep option (when it's plugged in) to "never". Not a solution by any means, just a work around so that all stakeholders (Lenovo, HP) understand how to work with the new port USB Type C. I hope this helps.

  Rob

  Lenovo support makes installation. I don't remember whether or not she has uninstalled the driver first. Sorry:)

• laptop connected to an external monitor with vga cable issues?

  1The votefavorite

  I use a Sony Vaio e series laptop running windows 7 Home premium 64-bit, which I always connect to an external monitor with a VGA cable. I put graphics options to display only on the external monitor and I would like to close the lid of the laptop. In the power settings I put it do nothing when the lid closes. When it is connected to the external screen I am able to look at the screen very well if the lid of the laptop is open. But whenever I close the lid, the display on the external monitor is turned off. I have tried everything I can think of as the use of a keyboard to toggle the display, change the plan to plug the monitor off before and after and even more, to much to list etc. I actually did it on my HD TV using a Hdmi cable that allows me to close the lid. But I want to use it only on my monitor that is sadly only VGA. I know I'm not alone here, I found many forums on the same issue, but nobody seems to have an answer. It is always with the help of a VGA cable when I find others with the same problem. Does anyone know where a response? It seems either VGA may be quite old now since the introduction of HDMI, that Microsoft has not bothered to look on this or get out an update to resolve this issue. Sorry it's just very frustrating because cannot find an answer, and I don't like the laptop overheating or wasting money on energy.

  (1) right click on your power Option icon on the taskbar

  (2) will take you to Options below

  Control Panel:

  Choose what closing the lid"this choice is the 3rd in your list of choices

  The next screen will allow you to configure your choice:

  When I close the lid:

  On battery: do nothing and

  Plugged in: Do nothing

  This will prevent your system/video to go to sleep or stopping

  Hope this helps

• HP EliteBook 8440p does not connect to the external monitor using VGA! Help!

  As you can read by the title, this computer does not connect to an external monitor using VGA.

  It will be not just to record all monitors in the control panel.

  Can I change the resolution, change the color, etc.. But it will pick up any display.

  -This computer has a HDMI port.

  -The Windows key and pressing P make the ring of little blue loading appear for a microsecond before nothing appears.

  -VGA cable is brand new, double male, directly connected to my Panasonic Viera 32 ''.

  -In the properties of this computer is giving an error code that this computer has no drivers. (Code 28)

  After a repair, he says "device Base system has not a pilot.

  Can someone direct me to the corresponding pages for drivers or instructions? Any help would be appreciated.

  There is probably a combination of keys specific to your model that enables / disables the VGA port on and outside.  Look in high ranking a key with a marking saucy that some how is supposed to look like a monitor.

• Why can't the pc to connect to an external monitor

  I have a nvidia 8800 gtx on a dell xps m1730 running windows 7 ult how ever I can't seem to load the driver to make it work and I can't connect to an external monitor. Help, please

  Hi Raphael,.

  You get an error code when you connect to an external monitor?

  Click on the link mentioned below on how to address the dual monitor.

  http://support.Microsoft.com/kb/976064

  Good day!

• How can I turn off laptop screen HP Pavilion G7t-1200 when connected to an external monitor?

  I have my laptop connected to an external monitor that is bigger.  How can I turn off laptop monitor?

  Hello

  Press f4 (on some computers laptops fn + f4), use the arrow keys to select the 2nd poster only, and then press ENTER.

  Kind regards

  DP - K

• LR CC works fine on my laptop but hangs when I connect a new external monitor

  LR CC big short on my laptop with or without the option enable the GPU.

  Last week, I bought an ASUS 24 "PA248Q monitor.  When I connect the external monitor and get all the settings to extend the screen everything works fine EXCEPT Lightroom.  When I run LR, I see the splash screen and the screen on the new monitor then turn a solid color (it seems that any color except the classic blue screen of death).  At this point, my laptop is completely locked.  No pointer, Ctrl-alt-delete.  I have to power down.

  In the investigation of this issue, since took me to update to the latest Nvidia driver, is ensure that the driver has been installed and uninstalled and reinstalled LR CC.  I calibrate using screen ColorMunki and tried with and without the calibration of loading software on startup.  When I unplug the external monitor and restart, LR works normally on the laptop.  It just craps out when the external monitor is connected.  PS CC works fine on my new monitor.

  Help, please.  I'm out of ideas.  I have a ticket open to ASUS, but so far their dose was to reset the screen and it does not solve the problem of crash.

  Thank you

  Craig

  Here is my info from LR:

  Version of Lightroom: CC 2015.0.1 [1018573]

  License: Creative Cloud

  Operating system: Windows 7 Edition Home Premium

  Version: 6.1 [7601]

  Application architecture: x 64

  System architecture: x 64

  Number of logical processors: 8

  Processor speed: 2.1 GHz

  Built-in memory: 8086,1 MB

  Real memory for Lightroom: 8086,1 MB

  Real memory used by Lightroom: 612,6 MB (7.5%)

  Virtual memory used by Lightroom: 578,5 MB

  Memory cache size: 60.7 MB

  Maximum thread count used by Camera Raw: 4

  Camera Raw SIMD optimization: SSE2, AVX

  System DPI setting: 96 DPI

  Composition of the Bureau enabled: Yes

  Exhibition: 1) 1366 x 768

  Entry types: Multitouch: no, built-in touch: no, built-in pen: Yes, touch external: no, external pen: Yes, keyboard: No.

  Graphic processor News:

  Check the supported OpenGL: failed

  Seller:

  Version:

  Rendering engine:

  LanguageVersion:

  GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS (size = 16, minimum = 48)

  GL_MAX_COMBINED_UNIFORM_BLOCKS (real = 24, minimum = 36)

  GL_MAX_FRAGMENT_INPUT_COMPONENTS (size = 8, minimum = 128)

  The application folder: C:\Program Files\Adobe\Adobe Lightroom

  Library path: C:\Users\Craig Mullenbach\Pictures\Lightroom\Lightroom Catalog.lrcat

  Settings folder: C:\Users\Craig Mullenbach\AppData\Roaming\Adobe\Lightroom

  Plugins installed:

  (1) Behance

  (2) substantive canon Plugin

  (3) Facebook

  (4) Flickr

  (5) HDR Efex Pro 2

  (6) home Plugin Leica

  (7) attachment Plugin Nikon

  Config.LUA flags: None

  Update Kit: Adobe Camera Raw to Lightroom 6.0 9.0 (build 1014445)

  Update Toolkit: book Module 6.0 (build 1014445)

  Update Kit: develop Module 6.0 (build 1014445)

  Toolbox update: Import Module 6.0 (build 1014445)

  Updated Toolkit: library Module 6.0 (build 1014445)

  Update Kit: Card Module 6.0 (build 1014445)

  Update Toolkit: monitor Module 6.0 (build 1014445)

  Update Toolkit: print Module 6.0 (build 1014445)

  Update Toolkit: Slideshow Module 6.0 (build 1014445)

  Toolbox update: Module Web 6.0 (build 1014445)

  Update Kit: com.adobe.ag.AgNetClient 6.0 (build 1014445)

  Update Kit: com.adobe.ag.AgWFBridge 6.0 (build 1014445)

  Update Kit: com.adobe.ag.Headlights 6.0 (build 1014445)

  Update Kit: com.adobe.ag.LibraryToolkit 6.0 (build 1014445)

  Update Kit: com.adobe.ag.MultiMonitorToolkit 6.0 (build 1014445)

  Update Kit: com.adobe.ag.archiving_toolkit 6.0 (build 1014445)

  Update Kit: com.adobe.ag.bridgetalk 6.0 (build 1014445)

  Update Kit: com.adobe.ag.catalogconverters 6.0 (build 1014445)

  Update Kit: com.adobe.ag.cef_toolkit 6.0 (build 1014445)

  Update Kit: com.adobe.ag.coretech_toolkit 6.0 (build 1014445)

  Update Kit: com.adobe.ag.curculio 6.0 (build 1014445)

  Update Kit: com.adobe.ag.discburning 6.0 (build 1014445)

  Update Kit: com.adobe.ag.email 6.0 (build 1014445)

  Update Kit: com.adobe.ag.export 6.0 (build 1014445)

  Update Kit: com.adobe.ag.ftpclient 6.0 (build 1014445)

  Update Kit: com.adobe.ag.help 6.0 (build 1014445)

  Update Kit: com.adobe.ag.iac 6.0 (build 1014445)

  Update Kit: com.adobe.ag.imageanalysis 6.0 (build 1014445)

  Update Kit: com.adobe.ag.layout_module_shared 6.0 (build 1014445)

  Update Kit: com.adobe.ag.pdf_toolkit 6.0 (build 1014445)

  Update Kit: com.adobe.ag.sdk 6.0 (build 1014445)

  Update Kit: com.adobe.ag.sec 6.0 (build 1014445)

  Update Kit: com.adobe.ag.socket 6.0 (build 1014445)

  Update Kit: com.adobe.ag.store_provider 6.0 (build 1014445)

  Update Kit: com.adobe.ag.substrate 6.0 (build 1014445)

  Update Kit: com.adobe.ag.ui 6.0 (build 1014445)

  Update Kit: com.adobe.ag.video_toolkit 6.0 (build 1014445)

  Update Kit: com.adobe.ag.xml 6.0 (build 1014445)

  Update Kit: com.adobe.wichitafoundation 6.0 (build 1014445)

  Map #1: Vendor: 8086

  Feature: 116

  Subsystem: 50e1028

  Review: 9

  Video memory: 64

  AudioDeviceIOBlockSize: 1024

  AudioDeviceName: Speakers (Realtek High Definition Audio)

  AudioDeviceNumberOfChannels: 2

  AudioDeviceSampleRate: 44100

  Build: not initialized

  Direct2DEnabled: false

  GPUDevice: not available

  OGLEnabled: true

  Finally I found a thread on the Dell forums.  Apparently, my Dell laptop can not display things complicated on the external monitor. Dell XPS L502X hangs when it is connected to the external monitor - general hardware - laptop - Dell Community

• Satellite P300 - randomly turns off the power when connected to the external monitor

  Hello

  I have a Satellite P300, Intel Core 2 Duo T9400 2.53 GHz, 4 GB RAM, ATI Mobility Radeon HD 3650 512 MB, running Windows 7 ultimate x 64.

  Recently, I bought an AOC v22 led screen and connect my conputer via HDMI. Everything works fine, but sometimes my computer off just randomly. I might have something to do with my computer overheating, so I clean the fan, but this was not good.

  I think it has something to do with the LED screen because my computer was never off his own.

  Hello

  So this also happens if you n t connect laptop to external display? So, you can determine what is causing this problem.

  If the computer laptop doesn t turn off without external monitor, you should try to update the BIOS and the display driver. Two updates that you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  You close the lid if you have connected the external monitor?
  What operating system do you use?

  In addition, it would be interesting to know how you clean the laptop. That's why I use the jet of compressed air that can blow the dust from the cooling fans and you don't have to disassemble the laptop.

  Good bye

• Need to connect by Satellite U945-S4110 to the VGA-IN of the external monitor port

  I need to configure my laptop Toshiba U945-S4110 to be connected to the VGA input of a display screen.
  What do I need?

  Is this enough for this HDMI to VGA Converter active

  http://www.Amazon.com/1080p-female-video-converter-adapter/DP/B008279OJ6/ref=sr_1_4?s=electronics&ie=UTF8&QID=1392112034&SR = 1-4 & keywords = hdmi + in + vga + adapter

  then a VGA - VGA cable

  > What do I need?

  Well, the phone supports only the output HDMI port. This port sends the signal video and audio digital.

  In the case where your external monitor supports only RGB (VGA) port, you will need to use some sort of adapter/converter, which would be able to convert the digital signal HDMI to VGA analog signal.

  I put t know if the adapter might work, but you will not get sound because VGA does not support audio, only video signal.

• Satellite 210CS - the screen stays black (even to an external monitor)

  Dear Toshiba Forum members and guests.

  Several months ago, I found an old laptop. When I turn it on, the screen remains black. And when I connect an external monitor to the laptop via the VGA input, two screens are black. I used a flashlight, pulled on the LCD screen of the laptop, but I don't see all the details on the screen.

  I thought it was because of the empty RAM slots. This week, I bought a RAM-unit and installed.
  I tried to start the laptop again, but nothing on the two screens (even though I used a flashlight).
  I searched the Internet for certain solutions, but nothing works. I also tried updating the BIOS, found on the Web from Toshiba site.

  Some information on the laptop:
  Toshiba Satellite 210CS/1.3
  PA1230E
  48 MB RAM
  1.3 GB HARD DRIVE

  Date of manufacture: 4 ^ th ^ October 1997

  If you want more information or you would like more information, please put a comment in this thread.

  I hope someone can help me solve this problem.

  Thanks in advance.

  I think there must be some serious hardware problem.
  I don't think that someone will be able to tell what part exactly failures because it could be any inner part.
  You buy the RAMs again. Well, in this case, we can exclude RAM problem, but there is probably a motherboard, CPU or a graphics card problem.

  From my point of view of the few you don't have many options: perhaps you could found some other good treatments Satellite 210CS somewhere in the internet since it is not very easy to get parts for this oldie

• Is satellite L350-170 - possible to use the laptop as external monitor

  Ok... So I broke the other day to the top of my screen on my laptop, and was amazing, if it is possible to use another laptop as an external monitor.

  while I put my files on an external hard drive

  or isit only possible connection to the pc?

  Hello

  It would be possible to use the second laptop as an external display ONLY if the computer a laptop would support the video port line-in to the receipt of the video signal.

  But the most common books supports the only video out s-Video port or a vga port, and in this case, you will not be able to use the laptop as a second monitor external.

  For example, the Satellite L350-170 supports only the RGB port that allow you to connect this laptop to external monitor but you can not use this laptop as compensation for external monitor.

  See you soon

• Connection ethernet and external monitor

  Is it possible to connect an ethernet cable and a VGA adapter to a MAC AIR at the same time?  I use my crush on internet in my school and I would like to use an external monitor at the same time.

  There are two options: a dear TB hub that allows you to add additional ports or a USB Ethernet adapter. The USB adapter will be slower, but depending on the speed of your school's network you may not notice a difference.