Satellite L50-B-1DZ - wireless network adapter does not work

Similar Questions

• Wireless network adapter does not work on my Satellite A200

  Hello

  My wireless network adapter does not work under Vista. If I press FN + F8 nothing happens. Wireless communication is always offline.

  What can I do?

  Details:
  Typ: Atheros AR5008X Version: 7.2.0.164
  Laptop Satellite 200
  PSAE6E

  Please help me!
  Thanks in advance!

  Phil

  BIOS bug? I don t think so

  First of all, you must make sure that this isn't a hardware problem. In this case, insert the Toshiba Recovery CD and reinstall the operating system of this device. This will outline the laptop to factory settings. Notes; This would format the whole HARD drive.

  After the new installation, you must activate the WLan switch on the side of books, and you can then use the switch button FN + F8 to select the WiFi network.

  I assume that you have already configured your Wlan router. So the same settings such as the SSID, encryption of WLan, etc. must be defined on the laptop too.

• Pavilion dv6 LY090UA #ABC: I reinstalled Windows 7 and my wireless network adapter does not work

  I just reinstalled windows 7 and I can not get my work a wireless adapter. I went in all directions looking for drivers to use and everyone I try does not work.

  I tried:

  Atheros Wireless LAN Driver 2011

  I saw someone talking about DriveTheLife in another forum and decided to try it.

  IT WORKS LIKE MAGIC, I don't know how he did it but he found and installed all the drivers I needed!

• Wireless network adapter does not work anymore and will not be repeated work without stopping the computer and then back on.

  Sometimes I leave my computer on at night.  Sometimes I notice that when I get back to him the next day that he has limited connection to the network I use.  When I try to disconnect it from the network, then reconnect, it says that it cannot connect.  Then, when I try to restart my computer it is sitting at a screen saying "stop down". "."  My wireless network software also is unaccessable in which she does not open and if I close the Task Manager and reopen it flashes for a second then closes.

  However when I turn it on manually and then turn it on again, which apparently is not good for the computer, I am once again able to connect to the network with full access.

  Can someone please tell me why this keeps happening and how to fix it?

  original title: unable to connect to a network.

  Hello

  Are you aware of any changes made to the computer, before the show?

  Method 1:

  Step 1: Safe Mode with networking

  Start your computer in safe mode with network and verify that the question.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Clean boot

  If you are not facing the problem in safe mode with network, then put your computer in a clean boot and search for the issue.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 7 of article to put your computer to normal startup.

  Method 2:

  Update the NIC drivers and check the issue.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Method 3:

  Run a virus scan and make sure.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
   
  Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

  I hope this helps.

• S3-391 Acer wireless network adapter does not work after driver update

  Hi, I have an Acer Aspire S3-391 running Windows 7 64 bit and I have recently updated my card (Atheros AR5BMD222) wireless network to the latest version of such 10.0.0.274 as recommended by the Acer site.  After updating the driver, I can no longer connect to my wifi at home.  When I try to connect, I get the message that no wireless connection is available (even if all my other devices can see the wifi network) and when I diagnose the problem, it is said that there might be a problem with the wireless network card and that windows could not automatically bind the ip stack Protocol.  I tried to uninstall the new driver and reinstall one old and running a system restore before installing the new driver, both with no luck.  When I try to manually configure a wireless connection, I get message "an unexpected error has occurred."  I have an automatic DNS and IP address, and when I look at my ipconfig, IP, DNS, DHCP, etc all have addresses.  Any help would be greatly appreciated, thank you.

  And while playing, I managed to fall on a solution.  When I looked at the properties of my wireless network card, I have disabled NetBIOS over TCP/IP and now everything works fine.

• Satellite P100-429 - new wireless network card does not work

  Hello

  I just upgraded my home network to the draft of the standard "n" and thought that I would upgrade my wireless card on my laptop P100-429;
  Laptop is under Vista Home Premium and has the latest version of BIOS and drivers installed.

  Laptop currently has an equipped Intel 3945ABG card that works very well. I bought an Intel 4965AGN card but when I enter it, the powers of computer to top, but wont load (lights, fan-nothing else)

  Okay - so I read on some forums, could be a bad card, so I bought a brand Toshiba 4965AGN card - P/N G86C0002P710
  Still having the same problem - the computer refuses to start. Intel technical support say the card should work?
  Obviously is a compatibility problem - what can I do about it?

  Or did someone knows what kind of card I should use?

  Thanks for your help!

  I m not a Satellite P100 owner but is your laptop equipped with 3 antennas or only 2?
  If your laptop has only 2 antennas t, you can pass it to N project because this WiFi standard needs of 3 antennas.

  I think that your laptop has only 2 antennas, so that would be the reason why the two cards are not compatible to your laptop.

  Welcome them

• Wireless network adapter does not work

  I get the error 10 and 31, and it won't let me access the internet

  Hello

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Check the site of the manufacturer of the system for latest driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Update my wireless network device does not work after installation of Software Distribution Service 3.0

  After the installation of Software Distribution Service 3.0 update my wireless network camera does not work how do I uninstall Software Distribution Service 3.0

  How did you receive the update?

  Was it via Windows Update or Microsoft Update?

  Before the changes are made to your computer, the system restore points are made. This is so that you can go back in case an update causes problems.

  Follow these steps:

  1. click on the Start button

  2. click on accessories

  3. click on system tools

  4. click on system restore

  5. click on next

  6. in the calendar that appears, select the one which refers to Software Distribution Service 3.0 and click Next

  After the collection of certain data, the computer will restart, and the update will be gone.

  Hope this helps

  Post back if necessary

  ___________________________________________________________

  If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Atheros AR5007EG Wireless Network Adapter does not

  Hello

  My Atheros AR5007EG Wireless Network Adapter has stopped working. I tried to update a driver he says not installed correctly. I am running windows 7 32 bit

  There should be a little more characters for your PC model Toshiba laptop.  For example, here is the support page for the Toshiba Satellite L300 - ST3502--> http://support.toshiba.com/support/modelHome?freeText=2221250

  If it was your model, you click on the "Drivers & updates" tab, click on the "Wireless" link under "filter by" and then look for the link "Atheros Wireless LAN Driver for Windows 7 (32/64)" you get to a page where you can download the driver installation package.

  Download the driver appropriate for your computer (which may or may be not the same as in the above example) and run the installer.

• Atheros AR5125 wireless network adapter does not

  Atheros AR5125 wireless network adapter not working not properly, says cannot find driver information too

  Any help, please notify!

  JudyB_729

  Judy

  What operating system do you use?  I would like to move to the section appropriate for your driver problem, but can't until I know.  BTW this section isn't for comments etc site technical support

• Wireless network adapter does not not for Pavilion DV6000

  My Wi - Fi just stop working and I can't connect to my wifi at home more.  When I click on the wizard wireless in the Panel, nothing in charge.  Wifi switching active button disabled, shows nothing on the screen (which it used to) went into the Device Manager and says "this device does not work properly because windows cannot load the drivers required for this device" (code 31)

  Ive shut down the computer and a restore of the system for a few days before the show but has not resolve.

  Any questions/possible solutions? Thank you

  Try this driver and see if that fixes the problem.

  Vista:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3688870&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_88727_1%257CswEnvOID%253D2103%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  XP:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3688870&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_101092_1%257CswEnvOID%253D1093%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Wireless network card does not work

  Pavilion dv6-6c01eo (A7Q69EA)
  
  Windows 7 64 bit
  
  Network controller is missing
  
  Have formatted the computer with a disc of CD windos 7 64 bit.
  
  Drivers updated via the HP Web site, downloaded all four pilots were of a single function, and it is sp54998.exe [1/1, 5.7 M] works. 3 other updates, sp55714.exe [1/1, 279.13 M] sp55805.exe [1/1, 11.55 M] sp56036.exe [1/1, 10.77 M] does not work. I have internet via an Ethernet cable, but I don't have internet through wireless netverk, it won't work because I have no driver for network controller. I need to download these drivers, where they work.

  Hello:

  Please click on the NIC in Device Manager.

  Then click on the Details tab.

  In the property drop-down list, select the second element (Hardware ID).

  After the first string of characters you see in the window.

  Who will be the ID of the model of the network adapter, and I'll send you the link to the drivers you need.

  HP is not sometimes the drivers for the cards they put in Notepad on the support page and pilot.

  Paul

• Satellite L50 - A - 16 H - Webcam + microphone does not work

  Hello

  I have a laptop Satellite L50 - A - 16: updating win8.1 64 bit.
  When I got this new laptop everything worked fine, but later it stopped working.
  I sent it to Toshiba for repair and ofcouse they made and works (the MB has been replaced?), but now, I noticed that my webcam and my microphone does not work. If I try to open the camera it says 'connect a camera' or on Skype, he asks the same thing.

  I read in the forums to look at the BIOS to enable, but there is no activation/deactivation button.
  I tried to search for a driver for the Webcam in the Toshiba site but I couldn't find: c
  and the microphone "working normally" but I when I try to call my friends can't hear me.

  I hope someone can help me with this problem, thank you very much :)

  You know what: best thing you can do as the ultimate test is to backup all your data and reinstall the original recovery image. By default the BIOS settings and install recovery image.
  After ding that you will have to re-buy factory and absolutely identical situation after laptop settings.
  Please test and send feedback.

  In my opinion, if the problem persists it could be hardware related issue. Maybe is cam not connected correctly.

• My Atheros AR5007EG wireless network adapter will not work

  I have an Acer Aspire One AOA150ZG5 that only comes with Windows XP directly from the factory. I recently started having trouble with XP so I switched to Windows Vista Home Premium and now my wireless card doesn't work. I tried to go to the manufacturer's Web site, but they have only taken over XP, so I installed the XP driver and used the Vista Device Manager to update and it still does not work. Please help me I spent all my money on vista so I can't afford a new wireless card.

  If Acer is not taken support Vista for your model, there is nothing that can be done about it.

  Sorry about that.

  You can consult the Web site of the manufacturer of the wireless adapter.

  If they have no drivers Vista, same thing; nothing can be done about it.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite C70-B-306 - local network connection does not work

  Hello

  I have a problem with my internet connection, Wi - Fi works fine but when I put the cable with connector rj45 of the connection does not work.
  I see that my laptop want to connect but then the connection is lost again en it says cable is not connected. Who goes on and out.

  It passes between the cable and internet Wi - Fi connection. The cable worked fine on my desktop.
  What can I do? I have the laptop 1 week.

  René

  Hello

  What model of laptop do you have? Do you use the laptop with the original operating system preinstalled?

  Open Device Manager and check if the LAN CSA is listed and enabled correctly.