Satellite L50 - battery recharge even if it works?

Hello!

I'm here because I don't know where else to find an answer.

Yesterday, I changed the hinges, the plastic cover and the chassis of a L50. No problem at all.
I have reset the motherboard, disconnect the battery and keeping the start button for a minute or two.

The computer seemed fine. Then after a few hours, I realized that even if the cable is connected and windows battery icon said, connected and charging, its level kept going down, now indicates 0%.

I tried some solutions, like the motherboard reset once again, uninstall Microsoft compatible control ACPI battery but nothing worked. He always gave me 0%.

Even if the battery is less than 2 years and works perfectly well until yesterday, I tried a few tests:

-J' started the computer using cord, no problem. I then removed the cord, the laptop off almost immediately

-J' started the computer using cord, no problem. I disabled ACPI Microsoft compatible control method battery.
I removed the cord, the laptop does not shut down, he kept working.

At this point, more than a question of damaged battery, it looks like a software issue?
Should I leave the computer in charge for a day or two?

I read somewhere that when these batteries fall below a certain threshold they take forever to load.
But I think that maybe I should do this operation keeping ACPI control disabled?

Thank you!
Max

At this point, more than a question of damaged battery, it looks like a software issue?

If the battery is connected and the laptop without AC adapter attached, then the battery is not empty and is the office-holder. In this case, I also believe that the problem must be related to the software (compatible ACPI control method battery)

Should I leave the computer in charge for a day or two?

Why not keep the power adapter plugged in for a longer period of time, and after that try to use the laptop with the battery power.

Alternatively, you can try to uninstall compatible ACPI control method battery.
Once the compatible ACPI control method battery driver disappeared (uninstalled), click on the 'Action' menu at the top of the window and select Scan for hardware changes.
This should reinstall the removed driver...

But if it does not solve the problem of battery, keep off compatible ACPI control method battery.

Tags: Toshiba

Similar Questions

  • My Satellite L50 - A - 1 7 no longer works

    Just some time ago, I was playing a game with friends, but all of a sudden my screen freezes and the sound. Pressing the powerbutton or now in did nothing. Only, I opened my Toshiba Satellite L50 - A - 1 7 and disconnected the battery because it has not turned off.

    It does not start anymore!
    Can someone help me soon?

    Thanks for the comments.
    It would be interesting to know if the problem will happen again if you use RAM in the first place again.

    Anyway, the key is that everything is working OK again.

  • Satellite L50-B-166 - WLan does not work under Slackware

    Hello

    I installed a copy of Slackware 14.1 on my new Toshiba Satellite L50-B-166, but when I start it up, the wireless interface does not appear, even launching ifconfig - a.

    I installed the iwlwifi driver but without result.
    Can anyone help?

    Thank you

    Hello

    Could you please put the output of the following commands:

    lsusb
    lspci

    BR

    Tom

  • Satellite L50-A-19N - sound doesn't work sometimes

    Hello

    I am currently the owner of a Toshiba Satellite L50-A-19N and the sound does not work sometimes.

    When I play an audio file or a video or same file while playing a video from YouTube, works well for a while and then suddenly it stops.
    When that happens, his is always recognized the system because you can see in the volume control, but no sound from my speakers.
    The same thing also happens when I connect my external audio interface (M - Audio Fast Track USB).

    I use Windows 8.1
    Please help me, because I use my Toshiba mainly for music production and play.

    > When that happens, his is always recognized the system because you can see in the volume control, but no sound from my speakers.

    Have you tried to connect a headset while this problem occurs?
    Please check.

    In addition, you must uninstall the audio driver installed.
    Then you must reboot the laptop and after installing the audio driver (you can get it from the page of the Toshiba driver) once again.

    Finally and above all, you said that you are using an external audio interface.
    I m not quite sure all these software but it might be possible that these additional 3rd party software could affect the internal sound card / driver. This should be checked as well.

    If possible I recommend you test the laptop without these 3 tools/software audio

  • Satellite L50-B-211 - Touchpad does not work

    Hi I have a question

    We just bought a Satellite L50-B-211, but the touchpad is not working properly.
    Move the pointer autour is no problem, but the buttons do not work.

    Using the buttons does nothing, left or right clicking has no effect?
    If I want to get the properties of a file right-clicking does not work?
    (two fingers press work)

    The hardware is correctly installed, there is no problem in the configuration of the device.

    Do I have to return the device (before installing our software / config the device to our needs)
    or is this a software bug?

    According to specification for laptop, your laptop was supplied with Win8.1 pre-installed so that all the necessary drivers are installed and all hardware should work fine.

    Try please check all the touchpad settings and check if changing the settings has positive effect.
    What you can try to do is to reinstall the original recovery image and test once more with the factory settings. If the result will be the same, I recommend you to contact your dealer as soon as possible and explain the situation. Ask if you can get the new machine.

  • Satellite A110 battery does not & will not work if the battery is connected

    Hello

    I will try to regain control of the situation quite clearly.

    Product: Toshiba Satellite A110-149

    Works fine on AC adapter / CC (Eve just a summary of the problem but because of Gentoo Linux, this used to work under Windows XP)

    Original battery was dead. Not only there is no charge, but with this battery and the AC adapter absolutely nothing, not a single LED. No need to mention that I couldn't turn on the computer.

    Bought a new battery at Eforcity.com
    -Replace: PA3465U-1BRS | 10.8V | 6600mAh (71Wh)

    With this new battery and the AC adapter plugged in, I have the green power led and lighted orange recharge. But even after 8 hours and the computer off of the battery did not charge.
    If I try to turn on the computer with this new battery in and the AC adapter is plugged in it starts to run, but after awhile it stops automatically, no question weather I start or enter the BIOS.

    BIOS is Phoenix v1.50 and reset the default settings.
    Also, downloaded the last OS independent 1.70 - WIN (bios - 20090121162419.zip), but is there a way to update without Windows?

    I tried to just unplugged and press the power button several times (last test, I continued pressing more than 2 minutes for what counts)

    I have clean the contacts with alcohol.

    Would it be because of a fuse or capacitor I could replace myself or something?

    Any help would be grateful.

    Kind regards
    Charly

    Post edited by: glutton

    Hello

    I'm not quite sure what happened to the laptop, but first of all you need to know that laptop m should feed and must run properly if the AC adapter is plugged.
    The isn t battery required to power the unit if the power adapter provides power for the laptop.

    So if ONLY the battery would be affected, the unit must always turn sector.

    This is why I think that its a serious hardware issue for example motherboard problem.

  • Satellite L50-A-111: dimming does not work properly after Win 8.1 upgrade

    Hello

    I have a problem with my laptop computer truebright LED monitor.
    Brightness works correctly, but the brightness variation is not.

    I should be able to choose from a range of 0 to 100% in both, but in gradation brightness that I can not only get up to 10% even though it says its 100%
    because when I level down it says 8,6,5,3,1 level and 0 when I get home eco and when I max he says 10% for 1 second, then 100%.

    Oh and something important, change the brightness variation has no effect at all, I think it's just stuck at 10%.

    But I know clearly that it is 10%.
    I tried everything so far, restore archive and the registry.
    It wasn't even until I restored the registry. I also tried advanced options that once solved this problem for me, tried everything, expect to reinstall the operating system.

    I installed windows 8.1 Windows store recently I don't know if its related.
    All my drivers are up to date.
    Happened yesterday after Batman Arkham City GOTY installing and disabling the Anti Virus, Firewall, etc...

    I don't know what else to try, im really frustrated, I can't handle this without the gradation of light at its maximum. My only concern is to reinstall the operating system did not solve my problems.

    Please give me some info on how to solve this problem, I'll try the registry if someone can help out me.
    Thank you in advance.

    My best regards,

    Sir. º Micael liberal

    Hello

    To be honest I m a bit confused.

    You said that you have upgraded to Win 8.1
    After these updates, you must update all the Toshiba drivers as mentioned on the 8.1 win Toshiba upgrade page.
    On the page of the Toshiba UE driver you can find the installation instructions that will show you how to install / update all drivers.

    This is very important!

  • Satellite L50-B-1JQ - Radeon R7 M260 working on x 4 32 bit bus

    Hey there!

    I'm having some problems, I think, with my R7 M260 dedicated graphic card.

    Each Web site mentions the card using a 128-bit bus and a bus to 64-bit on slower models:

    http://www.notebookcheck.NET/AMD-rad...122208.0.html

    Meanwhile, landmarks on the laptop were terrible at best and GPU - Z recognizes the card as using a 32-bit bus (!) and a PCI-E X 4 interface...

    I mean, even my old desktop of 9 graphics card uses a 64-bit bus... And my laptop Acer prices 5 years use a 64-bit bus ati card...

    GPU - Z recognizes even the 4400 HD which is also on this laptop as having a bandwidth 4 TIMES as big as the dedicated r7.

    Something seems wrong here...

    Please give me a hand...

    I use the latest toshiba drivers and it works on performance mode maximum energy...

    Here are some useful links:

    GPU - Z screenshots:

    http://GPUZ.techpowerup.com/14/12/13/7x5.PNG
    http://GPUZ.techpowerup.com/14/12/13/30x.PNG

    Reference:
    http://www.userbenchmark.com/UserRun/108080

    Each Web site mentions the card using a 128-bit bus and a bus to 64-bit on slower models

    Yes, I think you're right. I also found information that this graphics card has 2 variants:
    + 64 - bit and 128 - bit + DDR3 DDR3
    Radeon R7 M260 offers 384 Shader Processing Units, 24 UMT and 8 ROPs, on a 64 bit DDR3. Then the plant works to 940 MHz and goes up to 980 MHz in Turbo Mode, memory clock operates at 1000 MHz.

    Not very well if it could be a driver related issue but you could try to install other driver i.e ATI omega drivers and could check the performance of the GPU.
    But as far as I know laptop manufacturer recommends always using own drivers... especially the graphics card drivers... This is why the use of non-Toshiba drivers are your risk and peril...

  • Satellite L50-B-1JQ - Radeon R7 M260 working on x 4 32-bit bus only?

    Hey guys,.

    I plug just this Toshiba and expected a lot more of the dedicated graphics card.

    Landmarks were weak and GPU - Z indicates the card using a 32-bit bus while, for example gpu dedicated 5 years of my laptop cheap used a 64 bit one.

    GPU - Z is actually showing the integrated HD 4600 as having 4 times the bandwidth as the dedicated M260 R7.

    All the drivers are up to date according to the directives of the Toshiba utility.
    All references to the line card say that it works with a 128-bit bus or bus 64-bit for less expensive versions:
    http://www.notebookcheck.NET/AMD-Radeon-R7-M260.122208.0.html

    GPU - Z screenshots:
    http://GPUZ.techpowerup.com/14/12/13/7x5.PNG
    http://GPUZ.techpowerup.com/14/12/13/30x.PNG

    The AMD specification page provides this info:
    http://www.AMD.com/en-us/products/graphics/notebook/R7-M200

    _AMD RADEON M260_ R7
    INTERFACE MEMORY - available in 64-bit and 128-bit memory interfaces DDR3 (1 ratings)

    _FOOTNOTES_
    1 AMD Radeon R7 M200 series GPUS are based on the Architecture of GCN. Not all of the technologies associated with the GCN Architecture (PCI Express® 3.0, technology AMD ZeroCore Power, the technology AMD PowerTune etc.) are supported throughout the system configurations to verify with the manufacturer of your system for specific model capabilities.

    The AMD provides a PCI Express 3.0 technology.
    On your screenshot, I see that PCI-E (xpress) 2.0
    I guess interface memory 32-bit is related to the fact that the GPU is connected to the PCI E 2.0

    But that's just a guess.

  • Satellite L50-A004-PCI-e does not work at full speed

    Hello

    I have a C50-A004 with a Core i5 4200U + GeForce 740 M 64 - bit edition and I want to know why the PCI express speed turns to rev 2.0 x 4 rather than 3.0 x 8.

    That's what brings GPUZ
    [https://drive.google.com/file/d/0B_uBr26PxTwWemVuQXBRaWg2WFk/edit?usp=sharing]

    BIOS version is up-to-date:
    [https://drive.google.com/file/d/0B_uBr26PxTwWX3lxWXdzUFZrNVk/edit?usp=sharing]

    No one knows how to fix?

    Thank you

    The GeForce GT 740 M chip graphic (there are two different versions: GK107 and GK208 based on Kepler architecture) supports the PCI Express 3.0 and 2.0 bus architecture.

    The version 3.0 and 2.0 standard provide * complete backward compatibility * with the PCI Express motherboards for the broadest support.

    _For the way_
    The old GK107 chip supports memory of 128bits shader, 810-895 MHz, 384
    The new chip of GK208 is home to 384 shader, to further 980 MHz memory and 64-bit.
    But two support DDR3 memory.

  • The webcam does not work on my Satellite L50 - A - 1 6

    Hi, given that the webcam of my new Satellite L50 - A - 1 6 does not work (I tried with Skype) I want to update the driver but I can't find a specific in the list of drivers that can be downloaded. Could someone help me to find the right one?
    Thanks in advance
    Good bye

    In the past, that Toshiba gave driver webcam but for Win8 or Win8.1 this driver is not available more. Driver webcam is part of the operating system.

    Webcam is listed in (imaging devices) Device Manager?
    Since when did you notice this problem with the webcam?
    You can use video original application Win8.1?

  • Satellite L50 - B - 1 M 9 - indicators not lighted

    Hey guys,.
    Unfortunately, my first post is a small problem.
    I bought a brand new Satellite L50 - B - 1 M 9, everything works well except my indicators for Wi - fi and battery. I am talking about the small LED lamps on the front right-hand side of the laptop. I use Win8 64 bit and so much worse if wi - fi is on / off battery uses DC or not these two indicators remain lit all the time.

    Can you help me with this one?

    Greetings from Varna in Bulgaria!

    Hello

    This strange s that the two indicators should operate as follows.
    WiFi/BT indicator should amber lights when the BT or WLan is enabled.

    DC IN / battery indicator shows the condition on the DC-IN and charge the battery. White color indicates that the battery is fully charged, so that feeding properly.
    The LED would change to amber if the battery is partially charged or it s not charged.

    Anyway, if there is no feature of LED sign, I guess there must be a problem with the hardware of LED. I think it would be a good idea to check the unit by the authorized service provider.

  • Satellite L50 - B fan works even if the CPU load is very low

    I recently bought a Satellite L50 - B and I made a Windows 10 updated. The problem is that the fan works even if the CPU load is very low and the noise bothers me a lot.
    I ordered the video card driver and the system tells methat driver is updated to the latest version.
    I don't know what I can do to change this sad situation.
    Please, please, could you help me solve the problem?
    Thank you very much for your support and understanding.
    I await your quick response.
    Thank you.
    Giovanni Spina

    What CPU temp? Probably overheating?
    Try to replace the thermal interface on the CPU. ;-)

  • Toshiba Satellite L50 - A battery load but remains at 0%

    Hello!

    For the last two weeks, I had problems with the battery of my Satellite L50.-a. It remains at 0%, although it will load. If I remove the power adapter, the computer continues to operate for a period of time. Now, here's the odd part. If the laptop has been in charge for a while, it stops. If I remove the power adapter it will start again and show always is at 0%, but now it works for about 1.5 hours before the battery is actually empty.

    So I use my laptop without power until it stops, then I charge for a few hours and then it stops and we start over.

    Someone has an idea that I could do to fix this?

    I tried:

    • It loads from one day to the next without using the laptop
    • Several drivers update
    • Disconnect the battery, start with power supply adapter, stop and reconnect the battery

    Hello

    Have you found a solution? I have a similar problem and cannot run the laptop with the power connected.
    I have a warning message that the battery needs to be replaced and if I do that it does not start even if the replacement battery has been charged.

  • Satellite L50-B-127 - some keys are not working and touchpad blocks constantly

    Before leave here an apology because I'm Portuguese and my English level is very low.

    My computer is a Toshiba Satellite L50 B 127

    Lately, I noticed some anomalies which appeared me on my computer (which should take about a year). When I speak of anomalies refer to the keys you use rarely, and at this stage do not work (example: arrow left, Z,...)
    Not to mention that I noticed that my touchpad is constantly blocking, that is to say after the buttons to work, the cursor does not move, being sometimes more than 20 seconds to wait for the cursor to return to normal.

    If anyone has had this problem or knows the cause and the solution? Recognizing a response as soon as possible

    Hello everyone, I'm here to post my problem that has caused me a lot of problems and troubles and especially apologize because that throughout this text should meet several errors since my English level is low

    My computer is a toshiba satellite L50 B 127 and has a little more than a year of use

    Lately, I found some anomalies in my computer including some keys from one day to the other crashed, these keys are not widely used (arrow to the left, z, dash). In addition, my touchpad has been constantly block of minutes in minutes, even if the buttons on the touchpad still work, the truth is that the block cursor for a few seconds and then comes back to work as if nothing had happened. In 10 minutes, however this situation occurred four times

    I would be grateful if someone knew the reason why this happens or even the solution to answer me as soon as possible

Maybe you are looking for

  • screen iPhone touchscreen 5s

    I dropped my phone about 2 weeks ago and since then he has worked perfectly well just a slight crack on the screen. This morning I didn't have no problem using it all of a sudden the screen seems to have calibrated as when I go to type in my access c

  • The browser window does not whole screen, despite the actual program in doing so.

    At one point, I opened FF and the browser window has stopped picking up full-screen. The program actually fills the screen, but the current browser window has some sort of right margin. Do a right click in the right margin produced no popup menu. Bro

  • How can I download my iPhone photos 6 on my macbook for free space in phone, without losing the photos and videos?

    I would like to clear up space on my iPhone 6 by downloading all my photos on my macbook pro. How can I do this without losing all my pictures and videos. I already made the mistake of downloading and then thinking that I could delete what I uploaded

  • Visible property node tab Page work does not correctly

    I do a vi in which we have a tab with 6 pages control and to move from one page to the next there is control of ring with option for each page to page 1 (page 1 is the default value), at the same time only a single page is visible, so that we can mov

  • Help with EasyLink Advisor for WRT54GS

    OK, when I try to make it appear the EasyLink Advisor to my router it says need administrator privileges, and then under that it says that you must be logged on as a user with administrator privileges to change the configuration of the computer for h