Satellite L500-13W - does not load correctly

HI - he's two months bought new Satellite L500 - all wells and then last week began to have problems charging.

As usual, I allowed the battery to run down to approximately 10% of capacity before plugging the power cable. While work noticed immediately that the load would stop for about 2 seconds and then reconnect. After a few minutes, he would do it again.
It is the battery, but it is now flicking on and off quite frequently - 5 to 10 times per minute. Besides being boring as the screen dims, I am sure that this can only get worse on a regular basis.

I tried another adapter - my son also has a Satellite, and the problem is still there, this isn't a problem with the cable.
I would be very grateful if anyone has any suggestions. I can take it back to the shop where I bought it, but it is about 1 hour drive, and I need my computer every day, if I can't leave with them for a while, before driving another hour and return to perceive.

Hi merriman.
hope that is not related to a hardware failure...

Try the following:
-machine boot without a network, only battery
-while booting press F8 and choose no matter what option, the screen will remain (better is to do it with a startup back disc but..)
-Leave the empty battery
wait about an hour and go through the same procedure
This period of time should be much shorter!
-Plug the and leave it 24 hours without using the machine, do not turn on battery charge (I think that 12: 00 will also be long enough)
After this execution machine without power until the system requires 'more power'
avoid loading in short cycles, each charge cycle decreases the capacity of the battery
allways ac-power: each 2 minutes battery is checked and reloaded, that means in a year, the charge cycles are lost...

Tags: Toshiba

Similar Questions

  • Satellite L500-1XD does not load

    Laptop won t cool. With fully charged battery & no power laptop power starts without any problem.

    When I plug the charger cable the DC in and the battery light (on the front of the laptop) and plugged in and charging is displayed on the screen.
    Battery light and indication on the screen turns off, then back on battery only however dc in the indicator shows yet. Laptop works normally until the battery is flat.

    Charger and battery have been checked and are fine.

    > Charger and battery have been checked and are fine.

    You use the latest version of the BIOS? Otherwise, update the BIOS

    But to be honest, the whole story seems really strange, and in my opinion there is not many options or likely to be affected parts

    I think it might be linked to the motherboard maybe electronic power supply problem.
    In my opinion just a technician can help you

  • User profile does not load correctly, the user could not be connected.

    I tried to login to my account to administrator with my correct password and it says "user profile can be connected, user profile does not load correctly ' or something to that effect. Even when I login as a guest and enter my admin password on the user accounts settings and click ok, it won't let me access or modify accounts. Please help me, I am not able to access one of my documents or pictures of my guest account.

    ·                         Restore point:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If the above does not work:

    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    Difficulty of a corrupted user profile

    After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://support.Microsoft.com/kb/947242

    A temporary profile is loaded after you connect to a Windows Vista-based system

    See you soon.

    Mick Murphy - Microsoft partner

  • Desktop computer does not load correctly

    We can no longer switch uses profiles without having to reprocess the computer because the Office does not load correctly.  When we switch between profiles of uses without reformulate the computer, we get an error message indicating that "your office is not load correctly... loaded in safe mode.

    This start happening a few weeks ago.  This problem occurs every time that we move from user profiles or log out, and then move the user profiles.  We have to reprocess the computer on the desk in order to load successfully.

    All that we can do to fix this?

    If this problem was not more than 15 days ago, and if you remember the date when you did not have this problem, please do a system restore. Choose the date when there was no problem that your restore date.
    If this does not work, please do a check of the filesystem (sfc/scannow)

    Procedures for system restore:
    Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
    To sit and wait. The machine restarts when it's done

    File system (sfc/scannow) check how to:
    Start button > Search box type cmd > look up, do a RIGHT click on cmd.exe > click on Run As Administrator > in this window cmd black and white, type at the prompt flashing sfc/scannow > press the ENTER key.
    Note: there is a space between 'sfc' and ' / '.
    To sit and wait. It will take time.
    When finished, exit the cmd window.
    Reboot (restart your computer)

    t-4-2

  • The Manager.exe HPConnection does not load correctly. An error message is displayed each time

    Hello

    I have recently upgraded to windows 8 and since then, I have a problem.

    The Manager.exe HPConnection does not load correctly. An error message is displayed every time that restarting the laptop.

    Would you please guide me how to solve this problem.

    Thank you in advance and I look forward to hearing from you soon

    Best wishes

    Hello

    Try the following

    Firstly, uninstall your current version of HP Support Assistant using Microsoft 'Fixit' at the following link: this is particularly useful for correcting problems that may prevent resettlement on the machines running a 64 bit OS.

    http://support.Microsoft.com/mats/Program_Install_and_Uninstall

    When this has completed, restart the laptop.

    Then download and install the latest version of HP Support Assistant of the page on the link below - the download links are to the bottom of the page.

    http://h18021.www1.HP.com/helpandsupport/HP-support-Assistant.html

    After installation, restart the computer again.

    Kind regards

    DP - K

  • WSDL does not load correctly

    I get the following error (from the event 'fault') when I try to call a Web service via an application running on a Mac (OS X 10.4.6, Safari and Camino):

    Quote:
    Cannot invoke the MethodName method as WSDL does not load correctly
  • Satellite Pro L650-165: Texture does not load correctly some games

    I have a very strange problem where on some games textures on models of players do not load correctly.

    Looks like it loaded textures for minimum texture settings. Curiously, it seems only to influence the clothing, so I'll break down detail the faces and hands but bodies low resolution.

    All other textures loading correctly, all the effects look as it should.

    It happens on Call Of Duty: Black Ops, Half Life 2, Dead Space and Fallout: New Vegas. But this does not happen on Crysis, Crysis: Warhead, Bioshock 2, Gear Of War, and the demo of Just Cause 2.

    Anyone know of a solution?
    My drivers are up to date.
    Is my broken graphics card?
    I have to wait for Toshiba to release an updated for the ATI 5650 driver?

    Hello

    I don t think that your graphics card could be broken because it doesn't play other games.
    Maybe you should check the graphics settings in the game.
    You can change the graphic details game options.
    I recommend also check the forums of unique games in most cases you can find other people who could provide some tips.

  • Satellite Pro A200 does not load if current enforcement

    Hello

    I have a new Toshiba Satellite Pro A200 on Vista. I have a problem with the power adapter and charge socket.
    It will start and run very well and when turned off will charge the battery of fine food. But when running, the machine automatically runs battery, no network and does not load.

    This means that the battery is sinking and ended up to be recharged so just off the coast.
    When the power supply is removed and then reinserted, it will load for maybe 30 seconds, then stops to load again initially and continues to run on battery.
    At the same time, the blue light of indication on the front of the machine lights up to indicate that the ESA is connected and detected, and on battery defiler on windows in States ' ac connected, not charging battery "-in other words it works of ac and is detected but the machine isn't use to run power supply or load unless it is turned off...

    Can anyone offer a solution?

    Thank you

    That s very strange and I guess that this problem could be linked to the hardware problem.
    Either it's a defective battery or there is something wrong with the electronic power supply on the motherboard.
    In my opinion, there is only one way to know what's wrong some diagnostic tests are needed.
    This test can be performed by a technician of the ASP.
    That is why it s advisable to contact an ASP in your country for audits.

    This is a new laptop and warranty should cover everything!

  • my user profile does not load correctly. My system logged me in my computer using the temporary profile

    original title: user profile

    . When in safe mode, I see all my apps, but in normal mode, it does not load properly.

    Hello

    You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
    Mode has no default password (unless someone has changed the password so it should be available).

    Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
    has been known to cause this problem.

    Error message when you log on a Windows Vista-based or Windows 7 using computer a
    Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
    http://support.Microsoft.com/kb/947215

    How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
    http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    How to fix error "your user profile was not loaded correctly! You have been connected with a
    temporary profile. "in Vista
    http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

    BE VERY CAREFUL IF YOU USE THIS ONE:

    DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

    How to enable or disable the real built-in Administrator account in Vista
    http://www.Vistax64.com/tutorials/67567-administrator-account.html

    Use the Admin account hidden to lower your user account APPLY / OK then wear again to
    ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
    above message.

    You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
    password (or two with the same password) use a test or difficulty to another.

    You can run the Admin account hidden from the prompt by if necessary.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
    always leave to an Admin who is not used except for testing and difficulty account).

    Difficulty of a corrupted user profile
    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Driver does not load correctly

    Some time previously, I've updated my HP Officejet 6480 all in one software and since then, the drivers do not load correctly.  Whenever I start my computer I get an error while loading programs are.  It is said that a driver has not loaded correctly.  I am running Windows 7 home.  It may have started when I upgraded to Windows 7, 64-bit XP and loaded the new software from the HP website.  I don't remember exactly.  Today I tried to send a fax from the solution Center and found that the "Send a fax" button is irrelevant.  Since I am able to send faxes from the buttons on the front panel on the printrer, I guess that the driver does not properly is the fax driver.  All other functions work.  I uninstalled the software from the control panel in Windows 7 and downloaded and reinstalled the software several times without success to resolve this problem.  Any ideas how I can fix this problem?  Thank you.

    Hi Dave46a,

    Welcome to the HP Forums!

    I see that you have trouble to install your HP Officejet 6480 to your Windows 7 PC.

    I would try the following:

    1.) use Microsoft Fix It to uninstall the software. Select Windows, click on install or upgrade software or hardware, click on install or remove programs, and then click Run now next to correct problems that programs cannot be installed or uninstalled. (Use this to remove the printing software).

    2.) try using the printer HP install wizard for Windows for the re - install.

    (3.) to run the HP print and Scan Doctor to see if other errors occur.

    Hope this helps and have a nice day.

  • Yahoo mail does not load correctly

    Yahoo mail does not appear correctly. Does not add, or graphics. I uninstalled Firefox and reinstalled the latest version and it did not help. I started Firefox Add - ons disabled and this did not help. Yahoo email is the only site to be on. Gmail opens fine with Firefox and yahoo mail opens fine in Internet Explorer. It started tonight and nothing on my computer has been changed before you start.

    Nothing of what you have suggested will be / will work. I tried all your suggestions and much more, before you find what is the problem. Yahoo mail not properly opens with Firefox, if you try to open it with Yahoo messenger open. If anyone runs into this problem, close on yahoo Messenger and open your mail with Firefox alone.

  • Satellite C650 - Windows does not start correctly

    I have a Satellite C650, who does not start, when it lights there are two options, Startup Repair launch which leads to a black screen and mobile arrow, the screen remains like that until you turn it off the button stop (seriously ive left for about 10 hours). The other option is to start windows normally resulting in a blue screen and the laptop restarts itself.

    Help me please, make things worse I can't find the box that it came in which contains the guarantee and recovery disc

    Hey Buddy,

    You can start your laptop in safe mode? This means that if you press the F8 key before Windows starts and you choose Safe mode can you start Windows?

    If this isn't the case I think that it s something wrong with your Windows installation and that's why you need to use the Toshiba Recovery disk to restore to factory settings.

  • Satellite L500-13W is not posting

    My Satellite L500-13W got broken cmos battery and now it post it just turn the fan for a second then turns off immediately after
    Is it possible to fix the cmos battery?

    It is welded, but they can be traded.
    You want to do it alone?

    If you need professional help, you can contact the nearest Toshiba service provider. They can do for you.

  • Satellite A300 PSAG8E does not load

    I have a Toshiba Satalite A300 PSAG8E, which does not load.
    I was given a few days ago by a person stating that he is not working or light - vague details.

    At the reception that he turned on, asked to start windows normally or not, then started absolutely perfect, it powered by the charger, no problem.

    I let him on during some time different tasks.
    I came to him a few days later to find that he had himself set to off.

    I enabled again, how he asked to start windows normally or not. I started normally, and it came on the property.
    Since then I could not to power it on the sector.

    Why not load it now?

    Hi mate

    > Since I could not to power it on the sector.
    > Why didn't he care now?

    I m a bit but confused. What's wrong now? You are not able to feed the device or battery is not charging?

    If you are not able to turn on the unit, then you should try this:
    -Disconnect the battery and AC adapter
    -wait a while (2-3 hours)
    -connect the two parties to laptop and check again

    If your battery does not load:
    Try to update the BIOS and set its default value
    If that does not help, then the battery should be checked
    If the new battery does not solve the problem, then the motherboard must be checked and replaced if necessary.

  • Satellite A300-288 does not load the operating system

    Hello everyone.

    Today I turned on my laptop A300 and does not load the operating system. In other words, Toshiba logo appears, the message "Press F2 to enter SETUP", but not in continuity with the boot. Yesterday it worked and did not update the BIOS or something else.

    Someone has an idea? I deleted a both SDRAM and vice versa, to check that the problem wasn't RAM, but no. There is no beep. LED touch 'NumLock' and other, power on and off when I have impulses, so the keyboard responding but by pressing F2 or F12 does nothing.

    Thank you very much for your help.

    Start your laptop with F8 and test if you can start the operating system in safe mode.

Maybe you are looking for

  • Cable adapter AC Qosmio keep unpluggin

    My AC adapter cable qosmio, guard unplug the main card for laptop.The rear cap of the adapter card, is not tight enoughand if I move the laptop a bit, it disconnects that it self.It's a big problem when I do not use the battery as it turnes out my co

  • Tecra S3: Driver needed to activate the resolution to 1680 x 1050 on external monitor

    I am looking for a driver for Windows XP that supports an external monitor to 1680 x 1050 on a Tecra S3.So far with the Toshiba drivers I can only use 1440 x 900.The monitor can be detected through its resolution. Is it possible to use two different

  • ProBook 450: 450 Probook does not start

    My question seems to be a deafening silence. It's a topic that's been discussed so many times that he should not be inscribed? I searched this list to find answers, tried everything about the similar problem. Here, I have found no offers of the exact

  • No wifi network appear in the Panel

    When I right click the icon connection Wireless 'computer' to find a local wifi to connect to the screen is blank and no shoe my wireless service.  How can I fix?

  • SD card reader no longer works in Windows 7

    The SD card reader does not appear in my computer It appears in Device Manager under USB - USB2 Realteck card reader It appears in the devices & printers when the card is inserted In the Disk Manager it appears at the bottom of the screen when a card