Satellite L500 - 1CQ PSLS0E - CD/DVD drive does not work - driver problem?

Similar Questions

• Re: Satellite L500 iCQ, as Volume Rotary control does not work

  Front volume control does not work. Volume is set to maximum and can only be controlled by the mouse and the slider control.
  Can anyone help?

  To be honest I don't think that anyone will be able to help you with this.
  As far as I know that's not used such mechanical volume on older models of computers laptops, but electronically part controlled by software, so the only thing you can do is to test the functionality with the settings and see if the problem will be the same.

  What else can you do? I do not know. Maybe update the BIOS, but I do not think that this will help you.

  Do you use pre-installed OS original you got with your laptop?
  Have you made some changes or anything that can have a negative influence in this?
  Since when you noticed this strange behavior?

• Satellite L500: WLan is de-energized and does not work most of the time

  Hi all, I have a satellite toshiba L500 running windows 7. iprimus have used wireless internet, no problem for a few weeks before that, used it via an ethernet cable as I didnth ave a wireless modem. my phone was off load the other night and went flat, next morning when I woke up and turned on, it wouldnrt to connect to internet after hours and hours of phone calls, iprimus and many resets winsock, ethernet and modem reset cable tests they tell me that the problem is in my laptop...

  So I rang toshiba... and they got forced to go in device drivers, cards, and then network and disable, actually uninstall the wireless drivers and then reinstall... and it worked... Finally... (forgot to add with the confusion iprimus someone had reset my passowrd and I had to configure to the laptop...)

  Anyway, after all of these calls, I did a full restore of the computer laptop, all deleted and reinstalled everything and then reinstall the modem. This time in the configuration of the modem, he told me the wireless network adapter was unplugged and let me only implemented via ethernet...

  now earlier today, I had the internet... but he dropped randomly... pages Web will go slow, sometimes it will reconnect, sometimes he used. now I thougbht could try and uninstall and reinstall the modem again, s soul mistake and this time, can not get the wireless at all.

  Ive google to see if others have had this problem... and seeing what others has written, I went into my battery settings and checked the WLAN will not in mode 'sleep', etc., and ive also checked everythings active. Ive no idea what do, or iprimus and Toshiba will give me answers, both companies are just to blame each other lol
  so I have
  It doesn't seem to be my laptop, as all the lights are on modem... and iprimus keep telling me its not record not not with them (disconnects) so my wireless. Although every time my laptop has left internet, so would my iphone of bfs were testing us and so did my other laptop which is partially drunk but couldn't normally always connect to the net... so as to tell me it is a problem of modem... Ive no idea what to do... and can not keep it via ethernet on the bench in the new House ive, as with 2 children less than 3 years moved in, is asking for trouble...

  someone at - it suggestions?
  Thanks in advance
  :)

  > my phone was off load the other night and went flat, next morning when I woke up and turned on, it wouldnrt to connect to internet after hours and hours of phone calls, iprimus and many resets winsock, ethernet and modem reset cable tests they tell me that the problem is in my laptop...

  That s the best way to get rid of a client who has a problem, I know that those people who don't say, this is not my problem it problem computer laptop s ;)
  I think that the guys running out of ideas.

  However, first try an update of the WLan driver;
  NEST WLan driver can be downloaded here:
  http://APS2.toshiba-tro.de/WLAN/

  If new BIOS BIOS update would be available.
  You should also check the advanced settings of the wireless network card.
  To do this, go to Device Manager-> properties-> Advanced tab WLan card.

  Here you can choose some settings that would improve performance

  Good luck

• Satellite L500 - after Windows 7 upgrade games does not work in mode full screen

  Hello..

  I just received my upgrade to windows 7 in the mail and I installed it and all is well...

  But if I run a game that is not in the same as the computer screen resulution is a square in the middle of the screen and it is two big black lines down on each side. It does not put the game in full screen. The games in the same resulution works very well.

  Some games may be put to the resulution have this computer.

  How can I do then come in full screen?

  Thank you

  Hello

  Have you tried to update the display driver? Maybe you have an older version that is not fully compatible with Windows 7. Just check the Web from Toshiba site to get the latest version:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Normally for mode full screen in games you choose the native screen resolution of your screen there.
  Check this box!

  And it would be interesting to know in what games this problem exists

• Satellite Pro A200 series - CD/DVD-rw does not work

  I've had the laptop for a few months and it's great but now I try to add documents and music on CD or DVD and it will not write. The machine can play DVD +/-R/RW and CD.

  I have tried both DVD + RW is simply not found and the CD - RW try to write, but then the operation cannot have place towards the end of the process it says it cannot be completed.

  Any advice?
  Drives running on my desktop drives are very good.

  Hi Rebecca

  In most cases, these CD/DVD burning issues are related to mediums is not compatible.
  You should know that not all of the CDs or DVDs of different manufacturers are compatible and supported
  I would recommend so test different CD and DVD.

  What burning software do you use?
  I use the program Nero Burning Rom. It of great and supports many useful features. This software tested the CD/DVD drive and controls and sets the best burning speed.
  Sometimes it s useful to run these tests to ensure the best combustion parameters.

  But you question might be linked to the failure of hardware too.
  Sometimes the reader cannot process a CD or a DVD because the lens can not calibrate correctly. In this case, the disk must be replaced :(

  So finally I recommend that you check the different CD & DVD, and if the problem persists, contact the ASP in your country for a control.

  Bye and good luck

• Satellite P25-S520 - DVD player does not work properly

  Difficulty of DVD player or buy the external drive

  My DVD player does not work properly, in fact it can never work properly. Recently, I tried to back up my PC on a DVD using Norton 360. Norton did not recognize that the DVD was present. Then I tried to write a text file on a DVD and was a failure. DVD + R and DVD-R media were found to be (Maxwell 16 X).

  I could have probably lived with this however, I received a copy of Dragon NaturallySpeaking version 10 on a CD and my Toshiba would not recognize it. I tried the CD in my laptop nearby and it was recognized.

  An attempt to update the driver has also fails.

  I was able to copy a CD of music last night so that at least works properly.

  Does anyone know how can I fix? The important part is to be able to load my new program.

  Research on some forums I found that other people have had problems with the Pioneer drive. If the drive can't be fixed, I'm not adverse to buying an external DVD drive. Unfortunately, where I live there is no brick and mortar stores selling external drives and I prefer to avoid the hassle of getting a drive online and discovering that it does not work with my Toshiba. Can someone suggest an external USB drive that will read and write CD and DVD and is certain to be compatible with my Toshiba?

  Thanks for any help,
  Humbaba3000BC

  Satellite P25-S520
  PIONEER DVD - RW DVR-K12D
  Driver provider: Microsoft
  Driver date: 01/07/2001
  Driver version: 5.1.2535.0
  Digital signer: Microsoft Windows Publisher

  Any external USB CD/DVD drive will be compatible with your laptop.

  However, you won't be able to boot from CD (run recovery for example) If you are using an external drive.

  So, your best option would be to replace the internal drive with a Toshiba drive designed for the laptop. Call an ASP and request a quote.

• On Qosmio G20 DVD player does not work

  On my laptop dvd player does not work perfectly.
  I can watch DVDs and CDs, but I can't burn CDs or DVDs at all.

  This laptop is a former view model and think that when I bought the store I bought it since deleted most of the information

  Help, please

  Thank you

  Hello

  There are two possible reasons why you are not able to copy anything to the CD or DVD.

  First, it may be possible that the drives used are not entirely compatible.
  In such cases, it s always advisable to test different CD and DVD from different manufacturers.

  Secondly, the issue could be related to a defective laser lens; in many cases, this can happen because of a physical constraint. If the laser lens can not calibrate in a good position, then the player will not be able to handle the inserted discs.
  This could be the worst case, because this issue is not repairable. Just a STRANGE replacement could help.

• Mat * one years (uj-840) DVD player does not work properly

  The Mat * one years (uj-840) DVD player does not work properly.
  A symptom of the problem is that the icon does not appear in 'my computer '.
  more and she does not recognize the CD.

  I went to the properties of the drive through Device Manager and saw the following message is displayed:

  "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)
  Click Troubleshoot to start the troubleshooter for this device. »

  Following the instruction of the troubleshooter, I tried to update my driver through
  Device Manager, but it tells me that the current driver is the more up-to-date version.
  In the properties of the drive, I found that my driver version is: 5.1.2535.0

  What is a simple problem that has a solution?
  I don't see other actions to find the root of the problem.

  Thank you

  I hope this article can help you - http://aps2.toshiba-tro.de/kb0/FAQ8101LA0000R01.htm
  Check it out!

• Satellite P200 - Product Recovery Disk 2/2 does not work

  Hello

  because my laptop (Satellite P200 - I bought in December 2007) does not work more properly - and when, after a lot of cleaning it still wasn't working properly - I decided to start from the beginning and restore the operating system with 2 product recovery cd / dvd.

  Recovery disk 1/2 worked well - Windows Vista Home Premium product is loaded again on my computer.

  But what abot * Disck2/2 product recovery? *
  At one point, the recovery program calls for a 'supplement' but when I put in the product recovery disc 2/2 at this time, that the program does not recognize the disc. During the rest of the recovery program the program didn't ask for Product Recovery Disk 2/2, so the content of this CD-ROM/dvd now is not loaded on my laptop.

  Someone had this problem too?
  What do you have on this?
  Is this a problem for not loading the content of the product recovery disc 2/2 (I can go without it?)?

  Thanks in advance for any response!

  Artisans

  Post edited by: craftsmen

  Hello

  > Products 1/2 worked well - Windows Vista Home Premium recovery disc is loaded again on my computer.

  I put t know which modules the tool called for, but AFAIK the Toshiba image contains the operating system Vista, Toshiba drivers and additional software.
  So if you've recovered the laptop using the recovery disk Toshiba 1 then the laptop must be set to the SAME State as at the first day of the purchase.

  PS: what files you can find on the second disk?

• Qosmio G30-161 PQG30E: HD-DVD, it does not work

  HI -.

  I have the specifications of the models below, and when I try to use a HD-DVD it does not work. I followed another thread re HD DVD but it seemed to apply only to Windows Vista, but as you can see below I just Windows XP but apparently the HD ready display.

  Any ideas? Thank you, Robin

  Qosmio G30-161
  Part number: PQG30E-024024EN
  Main features
  -Technology Intel Centrino Duo Mobile T2300 to Intel Core Duo processor
  -Genuine Windows XP Media Center Edition
  -120 (60 + 60) GB HDD
  -1 024 (512 + 512) MB of RAM DDR2 (533 MHz)
  -17 "screen Toshiba TruBrite WXGA + TFT
  -Drive DVD Super Multi (Double Layer)

  Sorry but I don't understand your problem. You wrote just HD-DVD, it does not work. What exactly do you mean? The optical disk drive does not work or you can't watch HD-DVD movies?

• I installed plusv15 of real players and the dvd burner does not work. It freezes and told him to put in a disc.

  I bought plusv15 real player and it has been installed. for some reason any dvd burner does not work. A pop up comes up saying wrong disc record and replace it with a new drive. I did it three times. Real player support me staff referred to you. Windows dvd burner does not work.

  Hello

  I suggest you try to execute this fixit and see if it helps:

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  I would also ask you to contact the manufacturer of your computer to check the updates of the firmware of your CD/DVD drive.

  It will be useful.

• My CD-ROM/DVD-ROM does not work

  My CD-ROM/DVD-ROM does not work.  Manager of devices display a "!" on the Optiarc DVD RW AD - 756 A ATA DEVICE.
  1 device state poster (this device cannot start. (code 10)).
  2 update driver... shows that the best device driver software is already installed.
  3. it is the driver of manufacturing.
  4. I tried the microsoft fix it downloads and it has not solved the problem.

  Hope that enough information... Oh, my computer is computer laptop HP Pavilion G60-231Wm.

  Grateful for any advice...

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• DVD player does not work with Windows 10 on Acer Aspire 5553 G

  DVD player does not work with Windows 10 on Acer Aspire 5553 G. I waited for a fix of Windows a whole year now and I have tried several fixes that didn't work. Are there new solutions for this problem?

  http://community.Acer.com/T5/Windows-10/5553g-Windows-10/TD-p/375386/page/2

  

• My Dvd Player does not work. When a disc is in, it makes some noises but never charges upward.

  My Dvd Player does not work. When a disc is in, it makes some noises but never charges upward. Had this problem when I first bought the laptop but a parent set. Now I don't know how to solve the problem again.

  Maybe the lens needs to be cleaned or maybe gear or bearing broke. Seems like a hardware problem. Better do inspected by a mechanic of the computer. S.Sengupta Media Center MVP

• My bd dvd win does not work with windows 8.1

  My bd dvd win does not work with windows 8.1

  Hi johnny_k_01, sorry for the confusion, I just need to clarify. What is victory dvd software? or are you talking about the player view dvd itself? It will also be very appreciated if you can provide the name of the model of your device.