Satellite L500-1GE - cannot use hotkeys
Hello everyone!
I'm Tibor of Hungary. I'm not a big forum user, but now I need a little help.
I have a Satellite L500-1GE and I use Windows 7 ultimate (64 bit). My problem is the following:
I can't use shortcut keys (FN + F1... 9 buttons) and so I can not turn on/off the wireless. IT always work (still wireless led burn). I downloaded the package value, hotkey, accessibility pilot but useless. In basis without a driver a few work application (ESC, F1, F5, F6, F7) but I set the value package nothing works.
The most important function for me, it's the wireless switching (FN + F8) because if it works always I can't use my ability to complete accumlator laptop.
Could you help me on this problem?
Thank you very much for your help in advance and wish you a Merry Christmas and good luck for the new year!
Kind regards
Tibor
Post edited by: BVCI32
Hello
To use the FN keys, you need to install Toshiba Value added Package and maps Flash supports the utility. Make sure that the two versions are released for Windows 7 64 bit already. If you choose a version of Vista it does not work!
Here you can download the set:
http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers
Value added Package must be installed in the first place. ;)
Tags: Toshiba
Similar Questions
-
Satellite L500-19Z - cannot use WLan because the driver has been removed
I accidentally uninstalled REALTEK WLAN driver and now I can't use the wireless installation.
I tried to use system restore to recover before the uninstall, but the system restore won't restore (tells me that anti-virus prevents it probably, but I stopped my loading anti-virus, so this isn't the problem).I then allowed Windows 7 to find the material and it re-installed the driver, but I still can't use WLAN.
Anyone got advice to help me get out of the mess I made for myself?Hello
To my knowledge, this laptop supports the Realtek RTL8191SE WLan card 802.11bgn.
You can find the Wlan driver here:
http://APS2.toshiba-tro.de/WLAN/?page=downloadsI think that it shouldn't be a big problem to get this working again ;)
Good bye
-
Satellite L500-1WR - cannot use new Intel WiFi card
Hello
Purchase card Intel WiFi Link 1000 (112BNHMW) Mini PCI-E. Installed in place of the stock of Realtek. Windows has found the new device, I downloaded and installed the latest Intel driver (Windows 7 64-bit). But the Wi - Fi card does not see any wifi network (G ~ 12 networks and N = 1 networks around me), trying to troubleshoot-made the question by troubleshooting of Windows GET the message "on this computer's wireless capability is turned off" However the WIFI is enabled in the BIOS and the orange LED is lighting. I downloaded the utility of wireless control of intel, the Swith WiFI possible software option is just disabled (grayed out in the menu)
Laptop is locked for use only Realtek RTL8187SE? Or Intel does not support some "physical interfaces" to turn it on?
Is there a list of WiFI N Mini PCI-E adapters compatible with this laptop?Thank you
Hey,.
The question is why you have installed another wireless network card? In my opinion, it is not logical because the preinstalled Realtek card is tested with your laptop and works correctly. In addition there is no difference between the wireless network cards
If the wireless network adapter is enabled, press the FN + F8 key combination. This can enable/disable the WLAN functionality.
-
Satellite L500 (PSLS3E) - cannot update Toshiba CD Creator on Win7 64 bit
My L500 wants me to update my CD Creator and when I do the computer tells me that it is possible only on the 64 bit OS.
That she must be preinstalled Toshiba.
Satellite L500 PSLS3E-01T00VN5)Hi cba1,.
This update is necessary, or you can ignore this message to update?
In my view updates as necessary if something doesn t work properlyI don t use Toshiba CD creator because there are a few good alternative (freeware) programs, like CD Burner XP. Have you ever heard it?
Otherwise it s worth a try! ;) -
Satellite L500 - keyboard arrows using problems creates letters and numbers
New laptop, Windows 7, 4 GB RAM, etc.
Just restored to the State of factory again, but nothing helped.
Whenever I have use arrows etc., makes the letters and numbers coming up, not on every key shot but on say every second. The pad also tends to spit out the wrong numbers so intermittently, in word, excellent and other programs. The correct keyboard is selected. The arrow towards the low tends to do the
to come as the right arrow brought a up arrow to the left is and the up arrow seems ok. I'm stumped, any ideas?
Thank youHi whatnani,
If you have already restored the laptop back to factory settings and checked the correct keyboard layout the case is clear, your keyboard is faulty and should be replaced by a new one.
Satellite L500 is a fairly new model, so it must be covered by the warranty. Simply contact an authorized service provider and ask that:
http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service providerGood luck! :)
-
Re: Satellite L750-1XH - cannot use pre-installed Win7 Home Premium
At the start of the laptop without accessing the past named screen user except in safe mode. User name of affected the screen goes black.
Any ideas appreciated, wife is an attempt to do for College this week!
Your ad is quite confusing and I don t understand exactly what is happening. If I understand right, you cannot use Windows, but you have full access in safe mode. Is this correct?
In any case try to follow: start Windows in safe mode and try to roll back OS to an earlier time using System Restore tool. Do the first step, check what happens and post comments.
-
Re: Satellite L500-19th - cannot download the latest WLAN drivers
Hello
I have Satellite L500-19F and I can't download the latest LAN driver wireless on the side, how can I do?
Hello
Why you can t download the drivers?
Where did you download the drivers?Normally all WLAN drivers are located on the official page of the Toshiba WLAN Portal:
http://APS2.toshiba-tro.de/WLAN/Check this box!
-
Satellite Pro A60: Cannot install Hotkey utility for display
Re-install my A60 Pro Sat from scratch, you try to run the shortcut keyboard util for the display driver, but it gives the error message "TOO BIG TO FIT IN MEMORY" - ma has the standard 256 MB onboard (64 MB reserved for the GFX) - the driver I got from the download page I have version v1.00.08 - the INSTRUCTIONS that I got from the same page that I need to install v1.00.03
Someone at - it the file hotkey-dd-xp-10003sa-.zip? i've got hotkey-dd-xp-10008sa-.zip and it doesn't seem to work!
Anyone from Toshiba comes on here?
They don't have a support e-mail/contact?Hello
I don t think you will be able to use a driver for W2k on the Windows XP operating system.
Search for the other version in the areas of the Satellite A60 Equium A60To my knowledge, these drivers should also work on the A60 Pro Sat.
(it s advisable to read the news in the information area)
-
Satellite 2450-201: cannot use TV option after the new installation of the OS
Hello
I have a laptop toshiba satellite 2450-201.
I've always had the TV OUT works well with my TV, use the right cable SVIDEO.
I was able to watch divx movies in my TV using my computer.I had to format the laptop and installed windows XP again.
After that, I can't use more TV-OUT option, so that the image of the laptop could be seen on television, I've always had.
After that I updated display drivers, but the problem remains.Can someone help me?
Thank youHello
How do you reinstall the operating system? Have you used the recovery CD?
Usually after the reinstallation of the operating system from the recovery CD, everything should work properly.
It is important that you can switch to the TV. In this case, you can use FN + F5.
If it's not working so I guess that for display devices hotkey utility works or was not installed. Well, the alternative is to pass on the TV via the graphic properties. The TV option, you should find somewhere in the advanced options.However, check it and check if you have installed all the drivers.
-
Satellite P10 804: cannot use the day before and the FN keys / hibernation
Satellite P10-804. I had a virus and this has been supported by a professional. Since I can't use my Fn key and therefore cannot standby / hibernate etc. The sleep function does not work also if I use the "standby" button mode start Microsoft.
The system just trying to go to sleep and restarts again, sometimes doing, it resets the date and time of the computer. Any help would be greatly appreciated. Thank you.
Hello
May I ask why you n t use the recovery CD Toshiba to restore the operating system on the P10 Sat?
Simply boot from the restore CD from Toshiba that came with the laptop. This CD contains the Windows operating system with all the drivers and tools pre-installed.The installation process takes about 10 minutes. It of very simple but please note that this new facility will format the HARD drive.
Other questions?
-
Satellite A200-10W: cannot use shortcut keys Fn after installing XP
I installed the XP drivers a new? Control, drivers, Hotkey Utility, but problem is staying. I can't? t use these keyboard shortcuts. Any ideas?
Hello
Satellite A200-10W belongs to the PSAEC series.
Are you sure you used the right drivers for the A200 series right?In addition, I would recommend installing all the drivers available XP and tools on Toshiba as Chip Set Utility or hardware configuration page
See you soon
-
Satellite L855 - 13G - cannot use the Webclaim service
Hello
I bought a Toshiba Satellite L855 - 13G (PSKACE-04Y00CFR) in France last year, but this computer is already leading me in trouble!
The graphics makes noise, one of the USB port does not work, and now, without any change of software, the computer shuts off after displaying a blue screen with "KERNEL_DATA_INPAGE_ERROR".
This blue screen just randomly (say about two or three times a day).I would send this computer for repair, but now I find something very weird: Toshiba has done everything possible to hide L855 - 13G!
All first of all without result on the Web site:
https://www.Google.co.UK/#q=%22l855+13g%22+site:Toshiba.comSecond, the model is not listed in the support Center:
https://www.Toshiba.fr/innovation/generic/SUPPORT_PORTAL/
When I enter the serial number: no result. Also using the fields ' or is your product "model is not listed.Third, and better, I can't access the service of warranty claim for a Toshiba product for this computer: when I'm on https://weblord.toshiba-tro.de/Webclaim/ and I fill the serial number, the computer is identified (Alleluia), I have a green check mark for the status of the guarantee and "your product is still in warranty period."
But then, I can't click next and mention "product not available: Unfortunately your product is currently not available" appears instead.
So... apparently Toshiba is is best to forget about the Toshiba Satellite L855 - 13 G, but for unlucky enough to have people buy a what are the next steps?
I would like to be contacted by someone from Toshiba to get an answer or a proposal to change my computer or at least fix it!
Many thanks in advance,
Best regards.> I would like to be contacted by someone from Toshiba to get an answer or a proposal to change my computer or at least fix it!
First of all, I want to provide you with information on this community.
This is a user to user community where you meant fans of Toshiba. You won't find any Toshiba here peopleNow some details about the fix for laptop:
In case your laptop computer s hardware began to malfunction, you can contact the maintainer authorized Toshiba in your country in order to fix hardware problems.
Here on this page of Toshiba ASP you can find all available worldwide FSA:
http://www.Toshiba.EU/innovation/generic/ASP_SUPPORT/Last but not least, he should know that the warranty only covers hardware problems.
If in case the laptop does not work due to some software problem, the warranty would not cover the cost. This is why I would recommend you to retrieve the computer laptop back to factory BEFORE you contact the ASP.I hope this info helps a bit.
-
Re: Satellite L350-170 - cannot use cloned recovery partition
I have a laptop of s Satellite L350, one friend that I tried to fix it, but the HARD drive is faulty, so bad, that I can't create the restore disks. I cloned the image to another HARD disk partition (Yes, I created 2 partitions) which is a western digital, for some reason any when you press F8, I can't in the restore option, but I can't the disk faulty, is - because you use a Toshiba HDD only?
Thanks in advance
Chris
Hello Chris
It has nothing to do with Toshiba HDD. This option works when the laptop is preinstalled with original recovery image. This with cloned partition will not work and recovery of HARD drive option will not appear in the advanced boot options.
Only when you install Recovery on this new HARD drive image, going to market.
One last thing: this old L350 works fine with Win7 32 bit so if possible install instead of using original Vista.
-
Satellite Pro 4320: cannot use PCMCIA card after update BIOS 2.70
Hello!
I'm using the Toshiba Satellite Pro 4320 (SP 4320). With the very old BIOS (first) version 1.0, the system has worked well on LINUX (Ubuntu) and Windows XP. So I found the update of the BIOS (latest version on the toshiba Web site). I did update the BIOS version 1.0 BIOS version 2.7.
Now, I can't use any PCMCIA card.
Everything works fine, but I can't use two PCMCIA slots.
The cards will be recognized, but the system says that there is a resource conflict.
(WLAN/WiFi adapter) PCMCIA cards worked very well with the old BIOS version 1.0, but now it does not work.Windows XP says: 'conflict resource' and Ubuntu/Linux said after typing dmesg: "pccard gives wrong answer, for example."
Please, help me!
Someone got an older version of BIOS?
My idea is to 'downgrade' the BIOS BIOS version 1.0 or version 1.x.I have to downgrade the BIOS to at least 2. 6.
Bye,.
MartinHave you tried installing WXP again using Toshiba Recovery CD?
I mean it's so old model of laptop and I can't imagine that Toshiba will offer this update of the BIOS so long if there is a serious problem with it. -
Satellite P300-150 - cannot use a USB
Hello
I have a satellite p300-150 with Windows XP PRO SP2 and I can't use any USB key (I can't open) but I can use e.g. USB mouse.
Thank you
FotisHello!
You can format the USB on the laptop, and you can see it in disk management?
Do you have the yellow marks in Device Manager?This shouldn't be a problem with the USB ports, I think that the USB have some errors.
Good bye
Maybe you are looking for
-
How to install firefox last with the custom network home page
I'm trying to figure out how to do a network with the latest firefox installation, but suitable for the bringing into default homepage for the intranet portal of companies. I have several thousand computers that require installation and pushing by ne
-
Satellite Pro 4600 card wirless
Hi all, I'm new here so glad are soft. A friend asked me to find out what wireless card, it must be his daughter's laptop. She's a Satellite Pro 4600 with processor Pentium celeron. We have had a look and there is no card mounted on the machine, I fo
-
4G Radio for XOOM FCC approved
Yes Darling! The Radio/upgrade to 4G on the XOOM was approved by the FCC. http://goo.GL/omWHW 3.2, SD and now 4G. Day XOOM Best ever?
-
Hello world!! I formatted my HP laptop, then I installed Windows Vista Ultimate, I used before Windows Vista Home Edition, but when I made this new installation I lost all programs and the configuration that I have before, so I installed all once aga
-
I have no icons or start bar, just a blue screen. Make a right click on the desktop does nothing. Help!