Satellite L500-1WG - black screen, turn on

Similar Questions

• Satellite L500 - 19 X - screen turns white (white light)

  Hello
  I have a Toshiba Satellite L500 - 19 X, and my screen is not working properly. When I turn on the computer, the screen turns off, but it gets lightened, it becomes white.
  The external VGA output works fine, I have no problem with an external monitor.

  I already changed the flat cable (Flex) that goes to the screen, but I got the same results.
  Can someone help me? What could be the problem?

  Thanks in advance!

  Graphics card is correct because you said that the external monitor is working properly.
  So I guess that screen internal or the FL inverter is the troublemaker.
  But that's just a personal opinion, I think that you will need to test the two parts

• Satellite L500-1XJ - black screen after startup

  We have a portable Satellite L500-1XJ that our 3 year old got to and pressed the buttons on the key board. Now when you turn it on the screen gives aflicker then rest dark.
  I tried FN + F5 and FN F7 to see if it was passed to the external screen or brightness was rejected, but makes no difference.

  Do you have advice as to how I might be able to solve the problem?

  > Now when you turn it on the screen gives aflicker then remains grim. I tried FN + F5 and FN F7 to see if she was reactivated on the external screen or brightness was turned down but
  > makes no difference.

  It looks like serious problems with the related material to the mobo (vga). You can access Bios at startup, or the display is just dark? External monitor is connected to the laptop?

• Satellite L500-1WG - how to use the modem internal?

  I am new to computers and laptops and that you just bought the Toshiba Satellite L500-1WG. I was told, in the shop, he has an internal modem?

  What should I do to activiate/get connected to the internet? Do I need an external modem wired or wireless as well? No difficult language or abbreviations please, I am a total novice with very limited on this subject knowledge. Have only to learn how to start and run the basic set up.

  HEY buddy,

  > Told me, in the shop, he has an internal modem?
  It seems that this shop doesn't know what they are selling or they wanted kid a small round little

  It turns out satellite L500 is not equipped with modem and it doesn t have a modem (RJ12) port.

  So if you want to use the modem connection, you must purchase an external. But for now he s not advised to use a modem, the majority of the pages are not designed for modem more.

• Satellite L500 - 1WG PSLS0E - impossible to reconnect wireless

  * Computer info: *.
  Satellite L500-1WG - Partnummer: PSLS0E-07502EN5

  Windows 7 Home Premium

  The drivers are up to date:
  -Microsoft Virtual WiFi Miniport Adapter version - date driver 21.06.2006 - 6.1.7600.16385
  -Realtek RTL8191SE Wireless LAN 802.11n PCI-E NIC - 30.07.2010 driver date version - 2017.2.730.2010
  -Realtek PCIe FE Family Controller - 23.06.2010 - version 7.23.623.2010 driver date
  I disabled the "allow the computer to turn off this device to save power" for all 3 of them.

  * Problem: *.
  When I start the pc, it connects to my wireless router as usual, but then after that 30-60 minutes it stops working. He always finds the wireless router and the signal is excellent (4-5 bars), but when I try to connect it gives me the error message that it is impossible to connect to my router.

  If I restart the PC, it is always impossible to connect.

  But if I turn the computer completely off and leave it for a while, it works when I start it again, which suggests that he may need to cool (we noticed that the computer is warm enough, and that the fan is spinning a lot... but that could have been the same before - just that we it has not noticed that it was not a problem)

  ... But if I only it hibernates and let it cool for a while, it does not work to reconnect when I start again.

  I did a test earlier: I started the computer and made sure the wireless connected - then I put into hibernation and he did it again, and after that, he was still unable to connect. Then I stopped had and turned on the right now - and then it works fine.

  It's the same question at the local library, but my in-laws it worked fine for 2-3 hours the other day.

  My other pc that runs on Ubuntu, works without problems on our wireless.

  Any ideas?
  -Is it a virus?
  - Or my card network is not able to take the heat (material)?
  - Or is this a bug of Windows/driver (software)?

  I plan to reinstall windows, but before crossing with whom I was wondering if it's worth the hassle... Is it a hardware error, and should I just go directly to the seller?

  What you can try is updated the BIOS. Latest version is installed on your laptop?

  Another question: where you find WLAN driver version 2017.2.730.2010?
  Toshiba's latest version 2015.1.0427.2010?

• Satellite L500-1WG - Windows Media Player does not display my library

  Can anyone help?

  I have a Satellite L500-1WG, I ripped out the music in my music (the default setting), and it does not show in my media player library. I spent hours trying to figure this

  Hello

  I think you should check the settings of the Windows Media Player library. In Options > library, you can choose the files that need to be monitored. I think you should monitor the folder where you have added music.

  Check this box!

• Why the DVD jerky on my Toshiba Satellite L500 1WG?

  Images are missing when I play a DVD on my Toshiba Satellite L500 1WG.

  Make sure that the video driver is updated.

  What application you're using to play the DVD?

• Satellite L500 - flicker and black screen turns green

  Toshiba Satellite L500-screen color problem; White and black green turn turn pink. When the laptop is turned on after a while, the screen back to normal, but just for a second. Then he turns his back to the Green and Pink for black and white color again. The display also flashes.

  Anyone, please help me.

  Hello

  Theoretically the two parties may be affected: Notebok display or graphic card itself.

  Way simpler to check that connects to an external monitor. If the external monitor is ok, the graphics card is affected. Otherwise, the screen of the laptop must be exchanged.

  Is your laptop still under warranty?

• Satellite M70 - 340 - the screen turns black after that charge BIOS

  Satellite M70 - 340 screen turns black after that BIOS loaded. Please help

  Hi Totius,

  This means after the Toshiba BIOS screen, nothing happens or you tried upgrading the BIOS? Maybe you can explain that it still a little more detail.

  The problem is in this case you can t a lot because this problem of material based on s.

  You can try to remove the battery and the AC adapter at least an hour. Then connect the two devices again and try to start your laptop.

• Re: Satellite L500-19 X - screen keeps going black

  Hello

  I have a Toshiba Satellite L500 - 19 X and continues to go to the black screen.

  When you start the computer it flashes briefly until start / Boot screen properly before going black right now. Sometimes, the image is displayed correctly for 3 or 4 minutes before also black.

  If you hold down / tilt the screen under a strong light you can see a preview of the ghost of what should be displayed and if you connect an external monitor to the external monitor works fine and you can see a black ghost of what is on the external monitor on the laptop screen.

  I tried to reinstall the drivers, but it had no effect.

  Do you think I should replace the screen inverter Board or just reconnect the connectors screen?

  Thank you very much for your advice.
  Concerning

  Al

  Hello

  First to solve this problem, you must disassemble the laptop.
  I put t know exactly the procedure step by step for the L500 series but this procedure isn't very easy disassembly and you could damage other parts.

  Back to the question.
  It seems that the graphics card is OK and the problem is with lighting.
  Satellite L500 was equipped with a FL inverter Board and LCD joint (no backlight).
  The FL inverter controls the level of backlight screen s and I think that in your case, this part is defective.
  To resolve this problem, he needed to remove and replace the s FL inverter.

• Satellite A-C55-1N1 black screen turned on

  I've had my laptop for 7 months, I had a lot of problems with it from the beginning.
  It has always run slow and started to disconnect internet without no reason.

  A few days ago, she refused to connect to the Internet at all and now when I turn it on I just get a black screen.

  No beeps or logos just a black screen. It turns on OK, and I tried to turn it on so that hip and with just the battery running.

  It is still under warranty, but I wonder if anyone has any suggestions. I am really disappointed that my last Satellite has been brilliant for years, had no problem.

  You are able to access the BIOS?
  To access the BIOS press the F2 button power button.

  In this case isn t possible try this:
  Disconnect the power adapter and remove the battery.
  Now hold down the power button / stop along 30 sec.
  After that, connect the AC adapter and the battery and press the power button once to turn on the portable computer.

  Is this possible? Your comments would be appreciated

• Satellite L500-1WG WLAN WNAP A-Link connection gives 'blue screen '.

  Hello!

  OS: Windows 7 / 64-bit.

  I try to connect my Satellite L500 to WNAP A-Link 802.11n WLAN AP 3 G ROUTER via WIFI (Realtek RTL8191SE). Connection is established, but after a few seconds, I'm going to 'blue screen' and restart the laptop.

  A-Link WIFI connection works very well with my Nokia X 6 phone (S60).

  Any help?

  Sitiper

  Hello

  BSOD code, you get exactly?

  Have you tried to update the driver WLAN? You can find the latest version on the Toshiba WLAN Portal:
  http://APS2.toshiba-tro.de/WLAN/

• Satellite A200-1CR - black screen and no boot

  Model:
  Toshiba Satellite A200-1CR

  Question:
  By pressing the power button to power on the computer for a full boot, the power LED lights up but still black screen (not even of lighting). The logo led 'Satellite' in the lower left corner of the chassis remains off while the HARD drive has made a unique quick snap; DVD activity led (the device) always remains on even without any CD inserted, by pressing the eject button do nothing (status bar is locked) and no sounds of activity.
  No logo screen of boot (show stays), not of beeps dark and wide, no DVD or HARD disk activity, keyboard seems does not (all combinations that should light up an led, capslock, numlock, etc, does nothing), the fan works.

  I have already (without success) tried:
  -Unlock the tray, insert the rescue CD and power on
  -Remove the main battery and power on with AC adapter only
  -Insert a bootable USB stick/external HARD drive

  The computer worked as expected the day before and there has not been any kind of shock. Described is the situation I faced when I turned on the next time (only 24 hours later).

  What could be wrong?
  Thank you.

  > By pressing the power button to power on the computer for a full boot, the power led turns on but screen stays black

  Well, looks like hardware problem; Maybe the memory problem or something serious with the mother or the CPU. It of really difficult to say what could cause this.
  You can try to check the RAM modules.
  Trying to start using a maybe only module, it is useful in the case otherwise I fear, you will need assistance from technicians Toshiba ASP m

• Satellite Pro A200 - black screen with a blinking cursor

  Hello

  I'm new to the forum and have a big problem.
  So, any help is welcome and appreciated.

  My Satellite Pro A200 turns black after the BIOS screen and a black screen with a blinking cursor.
  Also just as the screen goes black a beep can be heard which shows windows boot.

  I can access the toshiba Setup screen but not the installation of security mode.

  Kind regards

  Hello

  Please go into the BIOS settings and check if the HARD drive is listed there.
  The blinking cursor is a typical sign of a malfunction of the HARD drive.
  Eventually the HARD drive is dead and you need to replace it and reinstall the operating system.

  Good luck

• Re: Satellite Pro A200 - black screen after the BIOS screen

  Hello
  I'm new to the forum and have a big problem. So, any help is welcome and appreciated.

  My Satellite Pro A200 turns black after the BIOS screen and a black screen with a blinking cursor. Also just as the screen goes black a beep can be heard which shows windows boot.
  I can access the toshiba Setup screen but not the installation of security mode.

  Kind regards

  Hello

  You wrote that you can access the BIOS, but have you checked if the HARD drive is recognized properly? Perhaps because the computer cannot start HDD isn't recognized then you should check this.

  If the HARD drive is recognized, I would try a Toshiba Recovery disk recovery facility. It seems that Windows isn't able to start and if you reinstall the whole system should help get rid me of this. Go to the start menu and select the CD/DVD drive as a boot device.

  Check this box!