Satellite L500-1XD constantly restarts & display recovery blue screen

I bought a laptop Toshiba Satellite L500-1XD from an Argos store in August. Shortly after that I got it occasionally rebooted itself and displays blue screen of recovery saying that the laptop has recovered from a hardware failure. It has become more common recently and he often stops, displays the blue screen, reboots and done over and over again.

I do not have many new programs on the laptop and that you have installed all updates. I deleted programs I have installed with the exception of Microsoft Office.

Another thing that could be linked so that when the laptop starts, he says the Toshiba Service Station has stopped working and trying to find a solution to the problem.

I'd appreciate any advice on how I might remedy this

Thank you in anticipation

Hi katrina_1,

This means that the pre-installed Windows version is still installed, right?

Well, I think that it of difficult to say why it happens it could be a hardware or software malfunction. The two may be possible.
The reasons of the majority of blue screens are drivers or hardware itself are all properly installed devices in Device Manager or do you see yellow exclamation points?

In your case, I'll try to reinstall Windows. Maybe it s only a software problem or driver
Also if you have installed both modules of memory long live, test it with a module only. You can also use Memtest86 or another tool of diagnosis of RAM to test the memory modules RAM for failures.

Tags: Toshiba

Similar Questions

  • Satellite L500 - 1XM Windows 7 iaStor.sys blue screen

    Hi I have a Satellite L500-1XM that keeps bluescreening with error iaStor.sys. It happens randomly between 10 minutes and a few seconds after the start (even in safe mode).

    I tried a memory test and that turned out fine. I checked the logs and they do not indicate hard disk failure or chkdsk reports any corruption or bad sectors.
    This could be the cause?

    Hi Mike

    Thanks for the comments.
    Glad to hear all is well.

  • Re: Failed to create of the media to restore Satellite L500-1XD

    I have a new Toshiba Satellite L500-1XD. I tried to create the support of recovery twice now and both times he failed on the first two discs with the following error;

    Cannot open the following file.
    E:\Boot\BCD
    (Error Code: F1-02013-00000000)

    I'm using the Toshiba Recovery Media Creator. The operating system is Windows 7 Home Premium 64-bit. I use standard DVD + R 4.7 GB discs.

    Any help would be useful.

    Thank you.

    > I use standard DVD + R 4.7 GB discs.

    I recommend you to use media of high quality like verbatim or Tdk. Voyez_ you, it can cause problems with weak brand, drives.

  • First time installation on Satellite L500-1XD was interrupted

    I turned on a Satellite L500-1XD for the first time this morning and during the first installation, the current was interrupted. It now takes an age to complete the installation.
    Is this normal?

    Is there something I can do?

    Thank you.
    JD

    What to say?
    One thing is clear here: power failure while the first installation runs is not normal and should not happen.
    So, now, how to tell if this is normal or not when it should not happen at all. Do you believe that none of us in the intention just to see how it works?

    Anyway, there is no other choice for you except to wait and hope that everything will be fine.
    Unlike the pre-installed recovery image is destroyed and you won't be able to install it at all.

    Please send some feedback soon.

  • Satellite L500-1XD usually power up

    My Satellite L500-1XD wont power up.
    Power supply failed. Received a replacement power supply, but all that happens when I plug it, that it is in the flashes of light (DC IN) (green) also makes a slight clicking noise.

    No indication of battery or something else ideas? The book says something to do with the heat dispersion system

    Post edited by: craig_inst

    Hello

    You see a BIOS or Toshiba splash screen?
    Nothing is visible on the screen?

    If this isn't the case, I guess that your laptop developed a serious hardware problem and I think that the parts must be checked by an ASP in your country.
    Theoretically, it could be related to memory, processor or motherboard
    So first the RAM modules must be verified, and if the RAM modules are ok, then, the technician should follow with processor and motherboard.

    Welcome them

  • No output HMDI Sound of Satellite L500-1XD

    I have a satellite L500 - 1xd

    I plugged on HDTV & image is great, but have no sound.
    When I checked the user manual it suggested that I go into the Realtek HD Audio Manager and to change the device default to something else, but there is no option that is available to me.

    Am I missing something?

    Read this

    http://APS2.toshiba-tro.de/KB0/TSB9401B00001R01.htm

    This is for Vista but can be applied for Win 7 too

  • Portable satellite L500-1XD stops

    Hello

    I have Toshiba Satellite L500-1XD. last week, a laptop stops completely when charging the battery turns off. I can see battery appears as 100% charged however laptop are not left on without recharge the battery.

    I suspect I need to change the battery but would be good to know if anyone else had this experience with L500-1XD.

    Thank you
    K * ij

    I think that this model of laptop is not new. Purchased laptop already used?

    It is possible that the battery must be exchanged. When you remove it, you will see the Toshiba label with part number. You can use this part number and order a new one.

  • Computer automatically restarts and displays the blue screen. How can I fix it?

    original title: blue screen problem

    Hi, my computer has been restaring, and a blue screen appears.

    I'm not so technical by nature, so I hope I can get a few step by step for how to solve this problem-if I can.

    The message that I could find on the problem (s) are present:

    Problemsignature

    Problem event name: BlueScreen

    The system version: 6.0.6002.2.2.0.768.3

    Local ID: 1044

    Files that describe the problem

    More information about the problem:

    Hey Mirjam Irene,

    1. What is the error message on blue screen?

    2. did you of recent changes on the computer?

    3 when was the last time it was working fine?

    4. do you have security software installed on the computer?

    5. once the computer is restarted and the blue screen occurs?

    Check if the problem persists in the safe mode and after back with the results.

    Start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    Restart the computer to return to normal mode.

    If the problem persists in safe mode, and then see the Microsoft article below and try the steps mentioned, check if it helps.

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly

    http://support.Microsoft.com/kb/958233

     

    If the previous step fails, then check the event viewer for the cause of blue screen and message comes back with the details.

    What are the information contained in the logs of the event (Event Viewer)?

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

    I hope this helps!

    Halima S - Microsoft technical support.

  • Satellite A60 restarts automatically displaying a blue screen

    I have a Toshiba Satellite A60 two years old, recently, I noticed a problem where suddenly the computer restarts automatically, in the first, showing a blue screen with white text for a glimpse of a second. Also what difference does update the BIOS?

    Hi Mustafa

    The blue screen of death appears usually due to hardware failure or serious malfunction of software.
    These two issues are possible on your device.
    Please see this FAQ Toshiba on disabling automatic Windows XP restart after a system failure:
    http://support.toshiba-tro.de/KB0/FAQ5B01770000R01.htm

    If the error message appears again, so you can see all the details of this message and then it should be possible to detect the reason why it happens.

    PS: Extra, you can try to recover the laptop with the restore CD provided. Maybe this will solve this problem.

  • Satellite L500-12F - error creating Toshiba Recovery disk

    Hello. New user on the forum and the new owner of a Toshiba.

    I am trying to create the 4 recovery disc for my Toshiba satellite L500-12th. Disks 1, 2 & 4 created with success, but 3 disk failed twice. The message I received was on the screen: cannot read the following file: F:backslash ZZImg backslash 09753xsp6.swm error Code: 020150-20-00000000
    (I can't type a backslash in this window of the computer)

    Anyone know of a solution or a similar problem?

    Dwight

    Hi Dwight,.

    The disks that you use to create the Toshiba Recovery disk?

    I have a good experience with Verbatim DVD-R. Have you tried these discs?

  • Satellite L500-13W - creation of possible recovery on another OS disc?

    I got a Satellite L500-13w and it came pre-installed with Windows Vista and the recovery of files, but I formatted the PC and installed Windows 7 and then installed XP.

    Now I want to use the system recovery to return to Vista, but I didn t create a Vista recovery CD using the files that came on the separate partition. If I had again the file instead, they came.
    So my question is, under Windows XP, is it possible to use these files to create the CD or the recovery file?

    Please answer

    Hi Nagravison-PT,

    Unfortunately, this is not possible. The Toshiba Recovery disk can be created on a preinstalled OS, because only there, the recovery disk creator is installed.

    On the second partition recovery files are now unnecessary, because you can use HARD drive recovery option more and creator of recovery disc is removed.

    What to do now?
    You use a Microsoft disc or you order a Toshiba Recovery disk:
    https://backupmedia.Toshiba.EU/landing.aspx

  • Port of charger broken on Satellite L500-1XD

    Hi my laptop L500-1XD fell about 6 inches on the carpet, he was in charge at the time, and the charger port seems to be cracked which means that the charger will not stay in and it will not load.

    Can you tell me please if it is possible to replace the charger port and if so where I would get it done (and how it is likely to cost)

    Thank you

    As far as I know, this port is soldered on the motherboard. You can try to search it on the net or on eBay (I saw some out there), but in my opinion, that this problem should be solved on the professional way so maybe better solution for you is to contact the nearest Toshiba service provider and ask for help.
    They can disassemble your laptop, check for damage and repair.

    I think that no one here can say how much it will cost. Ask directly.

  • Satellite L500-1XD does not load

    Laptop won t cool. With fully charged battery & no power laptop power starts without any problem.

    When I plug the charger cable the DC in and the battery light (on the front of the laptop) and plugged in and charging is displayed on the screen.
    Battery light and indication on the screen turns off, then back on battery only however dc in the indicator shows yet. Laptop works normally until the battery is flat.

    Charger and battery have been checked and are fine.

    > Charger and battery have been checked and are fine.

    You use the latest version of the BIOS? Otherwise, update the BIOS

    But to be honest, the whole story seems really strange, and in my opinion there is not many options or likely to be affected parts

    I think it might be linked to the motherboard maybe electronic power supply problem.
    In my opinion just a technician can help you

  • Satellite A200 - BIOS update fails on a blue screen

    Hello

    I spent from Vista to XP. All works not well I read on this forum on the wire of Vetko, that members "pinteno" has managed to update its BIOS for XP.

    Please inform what files it uses and how it update its BIOS. I have the BIOS to version 1.40 on my machine. When I try to update with the utility setup.exe (BIOS version 1.6), it goes all the way to new BIOS, then the machine is blocked with a blue screen. I have to remove the battery to turn off the power of the machine to restart.

    Can anyone help please? I installed all the drivers for XP, but the machine is not allowed. Not good, paved touch both although wrong keys Fn...

    Hello

    Usually, there are different Satellite A200 series.
    Please do not forget that you have chosen the right BIOS for the series on the right!

    By the way; the incorrect BIOS or an incorrect BIOS procedure may damage the ROM module and the motherboard.
    The BSOD is unusual during the update of the BIOS and I hope you didn t damage the laptop.

  • Satellite P300 guard crashing and giving me blue screens

    Hello

    I got a Satellite P300, running on Windows Vista home premium and its provided with a card ATI Mobility Radeon HD 3650.
    My laptop crashes and send me windows and blue screens said that it is the cause of ls my graphics driver and the eror message is Atikmdag.
    I've tried everything (I think), I re - installed windows but what I had to do a restore with the current settings, because in some cd a little way my F8 function does not work so I couldn't restore my windows from my hard drive.
    I also had the latest Ati drivers, it does not help either, I also re-installed and tried to run my laptop on windows drivers, it doesn't help either.

    I don't really know what to do, can anyone help me please?

    Are you sure you're running video drivers downloaded from a site of Toshiba? Unfortunately the drivers may not be the root of the problem, so it is important to eliminate as the cause. How to remove AMD recommended driver is [http://support.amd.com/us/kbarticles/Pages/GPU57RemoveOldGraphicsDrivers.aspx] and if you follow that with an installation of drivers Toshiba, then your laptop must be in a State also provided

    I would recommend that you look at this [how to troubleshoot display driver stopped responding and has recovered, errors of type ATIKMDAG.sys | http://support.amd.com/us/kbarticles/Pages/737-27116RadeonSeries-ATIKMDAGhasstoppedrespondingerrormessages.aspx]

Maybe you are looking for

  • How do the 5 server not listening on ports 80 and 443

    I want to configure an Apache Server on a Linux virtual machine (using the last VirtualBox) on my Mac running El Capitan 10.11.3. 5.0.15 server is already running on the Mac (and I want to keep it, with the exception of web services). I have disabled

  • I2C implementation using NOR-6008

    Hello world I have a NOR-6008 low cost multifunction data acquisition. Can I use this with shifter voltage level to apply the I2C Protocol...

  • MS Office 2010 not restored after reset of the laptop

    Hello I have a HP Pavilion DV6 laptop 3065EA, I bought way back in dec ' 2010. I had to reset recently because it was very slow. It came preloaded with Windows 7 Home Premium, as well as MS Office 2010 (remember not a trial version). However, after t

  • Former running and the new table in the same group?

    We have a ps4000 (sata, 16x1tb), which is short for maintenance in may without possibility of renewal. The ps4000 is a target for the replication of windows/hyper-v a ps6100x volumes and runs some volumes of hyper-v with virtual developer/test machin

  • 10.6.8 Mac crashed, does not now recognize LaserJet 2600n

    My office iMac crashed. (!!) The data has been retrieved and the disc repaired & reformatted. Then the data has been moved. I was installing software original & so far, everything is well except that I have a problem with the HP Laserjet 2600n printe