Satellite L500-1ZP - key to enter the BIOS version 2.10 and the upgrade of RAM

Hello

I have two questions:

1. I recently updated my bios version of laptops to 2.10 and replaced the hard drive with an SSD.
However, it seems that I can't enter the BIOS more.

I tried several buttons, but it just won't let me get bios of the laptop more.
Which button to use to access the BIOS?

2. I want to upgrade the standard amount of memory from 4 GB to 8 GB.
Are there recommended RAM sets should I use because of compatibility issues?

Thanks in advance for any help.

Kind regards.

> 1. I recently updated my bios version of laptops to 2.10 and replaced the hard drive with an SSD.
> However, it seems that I can't enter the BIOS more.

To access the BIOS press F2 at the beginning of the order started immediately after you have switched on the device, press F2 (press several times on the line)

> 2. I want to upgrade the standard amount of memory from 4 GB to 8 GB.
> Are there any sets recommended RAM should I use because of compatibility issues?

Toshiba Satellite L500-1ZP laptop takes the type of RAM SODIMM SDRAM PC3-8500 DDR3-1066 MHz 204pin. I would recommend the manufacturer Kingston modules.
Value report great price

Tags: Toshiba

Similar Questions

  • Satellite P10 804 will not accept the upgrade of RAM

    Apologies, this is it is a bit long and also if this question has been covered elsewhere here: I had a good nose autour and have not found something that seems to help.

    In any case, I had a Satellite P10 804 during these past years, I bought in the United Kingdom.

    Quite early in my time with this laptop, I upgraded the RAM. It was 3 or 4 years ago, when memory was not as cheap right now, so I bought just a single 1 GB module. P10-804 will take up to 2 GB of RAM.

    The P10 804 came with 512 GB as standard in two modules. My upgrade means I got 1.25 GB, which was in very good health. Everything was fine until the end of last year when the defective laptop; I followed the fault in module 1 GB of RAM. It was a bit awkward since I now live in New Zealand. However, the provider of the RAM was very professional, stood by their warranty, and we arranged a swap. RAM prices had fallen, so I bought another module of 1 GB at the same time upgrade the laptop completely.

    Now the problems really started. The laptop would not simply work with the new installed RAM modules. It would work with one alone, nor even less with my old configuration of a module of 1 GB and 256 GB module. Start and run for five minutes before a freeze; white screen with fans roar; blue screen; frozen screen normal with strange objects; No start at all. everything.

    Everything that works now is my original 256 MB module (his partner disappeared). This leads me to assume that I don't have some sort of hardware failure?

    1 GB modules are DDR333 SODIMM, CL2.5. This laptop will also have the DDR266 modules, and it has been suggested to me, lower speed might work. I can try this option since the RAM prices are * really * low now, especially if I get confirmation of this as a valid strategy possible.

    The laptop BIOS is updated to v2.00 (maybe?), and I also upgraded the HDD to a 120 GB unit (this works very well and is partitioned for XP and Linux). And from time to time I empty the fan.

    Any advice welcome. Thanks for reading.

    > The laptop would not simply work with the new installed RAM modules. It would work with one alone, nor even less with my old configuration of a module of 1 GB and 256 GB module. Start and run for five minutes before a freeze; white screen with fans roar; blue screen; frozen screen normal with strange artifacts; No start at all. everything.

    Reading your message, I came to the conclusion that this issue must be linked to the new RAM module and this module is malfunctioning or is not fully compatible with your laptop.

    The P10 can be upgraded to 2 GB, so you should be able to use two single RAM 1 GB modules

    So it must be a module problem

  • Looking for charger UK for Satellite L500-1ZP

    Hello

    I have a Toshiba Satellite L500-1ZP, I bought to the Netherlands.
    At the end of March, I move to the United Kingdom.

    I am looking to buy an adaptor charger/power supply I can use with my laptop in the United Kingdom.
    Please can anyone help with a recommendation?

    Thank you very much
    Neil

    Hello

    The laptop was supplied with the universal AC adapter that supports the * 100 / 240V * for use around the world.
    This means that you can use this adapter to the United Kingdom as well as in other countries.

    But what you have is a taken wall adapter google simply made wall adapter uk, you should find some universal adapters

  • Satellite L500-1ZP: inverted on the F6/F7 keys and screen brightness sliders

    On my satellite L500-1ZP, the brightness of the screen is reversed!

    So 100% brightness is totally blurred and 0% of brightness is entirely bright!

    "In terms satellite": level1 is full brightness and level8 is totally blurred.
    Also in the windows power options screen: 0% is its maximum intensity and 100% is dimmed.

    [Information on PC]
    Model name Satellite L500
    Part number PSLS9E-01X01CDU
    Version of the OS Microsoft Windows 7 Home Premium 6.1.7600
    BIOS Version 1.50
    Processor Intel (r) Core i3 CPU M 330 @ 2.13 GHz

    Hi mate

    To be honest, I've ever seen something like that
    Usually, the FN + F6 and Fn F7 function key should decrease and increase the brightness.
    I wonder why it does not work properly.

    Maybe it's a question of s an OS so you should recover the unit using the drive HARD recovery option.
    Press F8 when the laptop is turned on, and then select Repair my computer and then choose HARD drive recovery.
    The operating system would be installed again and you can check the brightness again!

    Otherwise, it could be a hardware problem as defective FL inverter...

  • Satellite L500 - high-pitched noise when the USB port is in use

    I have a Satellite L500-1ZP, aged from 1 month. When I connect a usb key or other device in my usb port, the laptop generates a high-pitched noise.
    The sound is not strong, strong but enough to irritate me.
    When I disconnect a device, the sound disappears.
    The sound is also there when I disconnect my laptop to the grid form.

    This is a common problem and can it be resolved?

    To be honest I don't think that this is a common problem. Is that what you found more threads with the same description of problem?
    The same happens when you use the available USB ports?
    You can locate where this noise is coming from? Maybe the speakers?

  • Satellite L500-1ZP - problems with scrolling

    My Satellite L500-1ZP has problems with scrolling via mouse, touchpad or up/down keys...; the window keep turning towards the start window and the content in the lower part can be kept still. The scroll in the pane bar right guard stutter and go back to the basic position.
    Very annoying.

    Does anyone have an idea for a viable solution?

    A little more info about your latest activities can be very useful.
    I can't imagine you have this problem all the time and I would like to know since when you have this strange problem.

    If you have installed something that can have a negative influence on the scrolling feature?
    Have you tried to roll back the BONES to the bygone era?
    Have you tried to do something to make it work again?

  • How to install Windows XP Home on my Satellite L500-1ZP?

    I formatted my Satellite L500-1ZP (PSLS9E) and thought DLI install win xp instead of win7 (do not have the disk/partition backup)
    now, when I start it with the cd of windows XP blue screen 'windows setup' inside start but when its finished loading, it gives me an error code:
    ' * STOP: 0X0000007B (0XF78DA63C, 0XC0000034, 0X00000000, 0X00000000).

    I read somewhere that I need to download SATA drivers for my laptop and do a disc to install windows xp with the SATA drivers on it?

    I tried to get these drivers, but I don't know that I have need and how to do the installation disc
    I copy my original windows XP Home cd and put the drivers in a folder somewhere on the disk?

    I hope someone can resolve my problem because the laptop is just over a year, and I don't really want to buy a new...

    I just hope that you created the recovery DVDs until you started to install own OS. After clean operating system installation you not longer have access to data recovery.

    You are right. For the installation of Windows XP Home edition, you need SATA driver. How to install Windows XP Home edition on the new laptop models that you can read on http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm

    In the end, I must say that your last sentence is pretty confusing to me. You bought the laptop designed for Win7 and you want to use the old WXP on this. Do you really think you need to buy the new laptop if you want to install Windows XP Home edition?

  • Satellite L500-126 - vertical lines on the Green/gray color dark

    Hello

    I have a problem with my new toshiba satellite L500-126. With certain colors, like green, dark gray, I see vertical lines on the screen, only the part of the screen were the color is.

    For example, on this screenshot I made. I see vertical lines inside the chatbox. There you can see the chattext. I looked at this picture with another monitor. But I don't see the vertical lines. Am I a bad screen? Or is this normal on this model?

    Hoping for an answer,

    -Floyd

    Screenshot:

    http://imgur.com/Kghg1.jpg

    > I looked at this picture with another monitor. But I don't see the vertical lines.
    In my opinion, the case is clear: there is something wrong with the internal monitor to the laptop and it must be replaced.
    What do you think?

    I mean that if it would be a software problem then you would have the same lines.

    I guess that your laptop is still under warranty because the Satellite L500 is fairly new. Contact an authorized service provider and ask for help. Normally, you should get a new free exhibition. :)

  • The upgrade of RAM will improve the speed side Windows and Mac?

    I use VMware fusion for music production and this program requires plenty of work. I have a MacBook Pro 4 GB of ram and when I turn on VMware it goes to 2 GB of ram in Mac and 2 GB ram under windows. My Mac's speed is normal when VMware fusion is off but when I turn on my Mac is very slow. The upgrade of ram will improve the speed on mac and also windows (windows is also very slow)

    BTW, my English is not very good

    Well, take a peek in the Windows Task Manager to see how much memory is required/used. If an operating system requires more memory available, it will start to swap out the disk, which will introduce a huge performance impact. If the answer to your question is probably yes.

    André

    PS: After adding memory to the host, you must also change the client memory for the virtual machine.

  • Satellite A50 112: F1 not work key to enter the Bios

    My toshiba Satellite-SA50-112 do not enter in the BIOS or CMOS settings because of the F1 key is not working what I can do to change the boot sequence for CDROM in an alternative way.
    Please help us to work better

    Hello

    I hope you had success with the start-up of the device with a bootable CD/DVD, but it will be interesting to know is F1 key works well under Windows operating system.

  • Satellite A40-151: how to enter the BIOS settings?

    Hello...

    I'm on Toshiba Satellite A40-151 the DVD for this broken but this isn't worth it.
    The problem is that I can't enter the setup (BIOS) to boot from a different boot device, or I do not now how to enter.

    Help, please

    thanx

    Hello

    I think you have a Toshiba BIOS.
    In this case you must press the ESC key immediately after the laptop has been powered. Try to press the button several times

    By the way; You can also use the F12 key to get the boot menu.
    Then you could easily choose your boot device
    This also works

    Good bye

  • Satellite L500 - FN keys do not work after the upgrade to Windows 7

    Hello
    Satellite L500-PSLJ3E, upgrade to Windows 7 64 bit and none of my function keys work with the fn keys. Value added and Flash Cards Support utility package are installed.

    Anyone know how I can solve it?

    Thank you very much

    Hello

    Have you installed the latest tools of the Toshiba page? If you install both VAP should be installed first then Flash Cards Support utility.

    In addition, I would try to clean the registry with CCleaner.

    In the forum here is already a few discussions on this issue. You must also use the forum search.

  • Satellite P50T-A01C - how to enter the BIOS settings?

    Can someone tell me please how to enter the bios on the Satellite P50T-A01C
    I tried fn f2, f10, delete, not go...

    Does anyone know how to get?

    Thanks in advance.

    If you use Win8, you must proceed to a full stop, and then after the new departure enter the BIOS settings.
    Please check - http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
    Try to please and post comments.

  • Satellite L310 - I can not enter the Bios settings

    Dear team,

    I have a toshiba that is always on warraty.
    Is there anyway you can help me.

    It ceased to operate effectively. It does not exceed the Bios.
    By that I mean you reach the Bios screen, but you can not enter the Bios settings.

    Details
    model: toshiba Satellite L310

    What exactly do you say: you reach the Bios screen, but you can not enter the Bios settings?
    The BIOS is secured by password or what?
    You see a splash screen of Toshiba for short time?
    Is it possible to start the Windows operating system or to recover the laptop?

    Please publish more details!

  • Satellite 2540xcdt: How do I enter the BIOS

    Hello

    I just bought a computer above and would like to know how to enter the bios before it starts to the BONE.

    anyone out there have any ideas?

    Thank you very much

    F

    Hello

    Have you tried to use ESC and F1?

Maybe you are looking for

  • CSS Transitions now render black bar momentarily

    Check - so every time CSS transitions occur on our site, they seem to cause a momentary Black rendering problem (see: https://dl.dropboxusercontent.com/u/3255103/whut.png) -you can try it here: v5.bsidestudios.com (must have the new firefox 33.1) - i

  • Why can't iOS on my iPad Pro 9.3.2

    I would like to know why I am unable to get the new operating system on my iPad 9.7 Pro 9.3.2!

  • problem of gen iPad 2

    I have an old gen2 ipad and when here lately, when I'm with pinterest or facebook, apps will close suddenly and the screen goes black for a few seconds and then the home screen appears... there at - it something to prevent this? I have the version mo

  • Xperia auto-updates to date that have already begun.

    I have a Sony XPERIA X 3 Compact with 11 GB of free memory, however, my update from Sony has tried to download in vain for weeks, with an update for Podcasts. I can't find any way to stop them, and so they are emptied my battery permanently. I turned

  • Error 0x8007007B

    I have a Hewlett Packard Compaq CPU Tower computer. It was new in 2010. I have a 500 GB hard drive and 4 GB of Ram. Everything goes normally, but I recently found that the free space on my C: drive was disappearing at a rate of knots. For the C: driv