Satellite L500-207 will not find wireless networks

Similar Questions

• Re: My Satellite L500-1XC can't find wireless networks

  My computer can not find wireless networks more and that's because drivers. I downloaded one I thought was mine from this page https://aps.toshiba-tro.de/wlan/?page=downloads, but the download link is no longer active :(

  I am able to select Wireless as a connection, but he does not see anything and my wifi works entirely 100% so any help would be great guys :) Thank you

  I agree with Timox: you need WLan 802.11bgn Realtek RTL8191SE Wlan card driver.
  Download driver Toshiba WLan portal should functions since I managed to download the driver of the page package.

  Alternatively, you can download the driver directly from the Realtek page: [RTL8191SE-VA2 | http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=21&PFid=48&Level= 5 & Conn = 4 & DownTypeID = 3 & GetDown = false & downloads = EU tr]

• Why my Windows 7 will not find wireless networks?

  My Dell with Windows 7 apparently tried to auto update and no not now recognizes wireless networks? I get the following error codes 80244022 8024001F, 8024402C, 80072ee2, 8024401 b, 80072efd HELP!

  The full convenience store is no problem?

  Hi Kschiess,

  Welcome to the Microsoft Answers site!

  You may need to set automatically detect the parameters of local area network (LAN) for Windows Update can go online to obtain updates of Internet Explorer. To do this, follow the steps below.

  1. open Internet Explorer by clicking the Start button, and then click Internet Explorer.

  2. click on Tools , click on Internet Options, click the connections tab, and then click LAN settings.

  3. in an automatic configuration, select the check box automatically detect settings , and then click OK.

  If it does not, follow the steps in the article mentioned below:

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates

  http://support.Microsoft.com/?kbid=836941

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My Windows 7 computer will not find the networks wireless after a system restore.

  My Windows 7 computer is not find wireless networks after I did a system restore. It was perfectly good wifi before the system restore and other members of my family have a great connection except me is not a problem with my router. I think I know what the problem is, but I just don't know how to fix it. So there you go. I did my restore system about 2 days after that we moved on the provider of internet/tv "Comcast" to the tv/internet provider "Verizon". what I think has happened, is that I restored my computer to the point when we had no Verizon so that he could not find the network. Now, since we have Comcast it won't identify this network either, so maybe some of you out there could help me. : D

  Hello Nicolas,.

  Thank you our writing about Microsoft Community.

  If your computer has a wireless network card, Windows will automatically detect the networks wireless in range of your computer.

  You may encounter network or problems of Internet in Windows for several reasons.  Some common problems that can cause these problems are:

  • A wireless network adapter switch that is not enabled

  • WEP, WPA, or WPA2 key or password security issues

  • Cables that are not connected correctly

  • Corrupt or incompatible drivers

  • Missing updates

  • Network connection settings

  • Hardware or software problems

  I would ask you to check out the troubleshooting steps provided in the articles below and check if they help you solve the issue.

  Why can't I find a wireless network?

  Wireless and wired network problems

  Here are some links to site Web de Support of Comcast, who talk about troubleshooting of XFINITY Internet connectivity issues.

  XFINITY TV App: Can't detect your XFINITY home network

  The problems of XFINITY Internet connectivity

  Hope the helps of information provided. Do we know the State of the question, so that we can help you further.

  Thank you.

• Not finding wireless networks

  Hello, I recently updated my motherboard due to hardware failure now pci wireless card cannot find any wireless networks and will seek not even networks.

  I tried the older drivers, change the pci slot and I tried to configure the network manually, but when I try it it says "an unexpected error has occuered" and it's all no other options.

  So I got a usb wireless adapter and installed and the same thing happens, it will not look and can not have all networks.

  I ran the scan of the windows files and it reports no errors

  Any suggestions would be helpful

  Hi Cannonballgum,

  1. is the wireless card detected by Windows?

  First check if the wireless card is detected by windows.

  1. Open Device Manager by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  If you see the card wireless available in the Device Manager, then visit the card manufacturer site download and install the update to the latest driver control if it works.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Solve problems, find wireless networks
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Wireless network card: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer laptop Windows 7 can not find wireless network connections

  My Samsung RV510's laptop had windows 7 on front and without wire worked but recently my hard drive for this laptop broke and I had to get a new HARD drive. Now I have a new one that I installed windows 7 on it and now it cannot find wireless network connections even if there is a broadband router in the same room as the laptop. When I try to connect to a wireless network, the computer does not find.

  You have turned on WiFi?  Have you checked Device Manager to see if your wireless network card has a driver?  The different procedure for Urning edited that WiFi on East and model, so you for each brand will have to read your user guide - I promise he won't give you the leprosy!  :-)  To check the driver, click Start and right click on computer, then click Properties.  Click on Device Manager and look for the entry that says that the network cards.  Click the arrow to the left and look to see if

  There is a! or? next to him.  If so, you must download the driver appropriate from your manufacturer.

  Good luck.

• JournE Air 801 not finding Wireless Networks

  My 801 Air could see my wireless network when I first turned on. I had trouble getting security WPA2 to work so I reset the default 801 by using the reset on the device.

  Now I am unable to find wireless networks.

  Any ideas how I can get my 801 on wireless networks?

  Thanks for your help/advice.

  Hello

  Are you sure that the Wifi is enabled in the settings of Air 801?
  Usually the WiFi icon should be visible in the upper left corner, if the WiFi network has been activated.

  I downloaded the manual for Air 801 (European Toshiba page-> support) and download-> user manual. On page 42, you will find all the details on the networks.

  You can use the Wifi protected Setup. It is the best way to connect to the network.
  -Select Wifi protected setup and press OK
  -Press the wps button on your router wlan and press ok to continue
  -Press exit to return to the previous page.

  Then use the Wifi Wizard to detect and connect to the WLan router in your region.
  -wifi select Assistant
  -Press on top and down to select your preferred router
  -Press OK to confirm your selection
  -Enter the password router e

  You can also use the advanced configuration
  To do this, check the user manual!

• My laptop can not find wireless networks

  My laptop can not find wireless connections, that it works fine when I use an Ethernet cable.

  It works on 64-bit windows and has a intel wifi link 1000 series

  The most likely reason is that the wireless card is turned off or disabled.  Most laptops have this feature in order to save battery power if the wifi is not necessary.  Depending on your laptop, it is a physical switch or a combination of the Fn key and one of the F keys.  See your User Guide for more information.

  You can also check the Device Manager (click the ORB start and type Device Manager and then press the Enter key).  Expand the "Network adapters" section by clicking on the arrow to the left and then double-click the entry for the Intel Wifi Link.  Check 'Device status' in the 'General tab '.

• Satellite M40X-149 does not have wireless network

  Hi All/person

  I have a Tosh satellite M40X - 149. My problem is with the wireless operation. For about a year I used it then no problem recently the wireless from strange behavior - I would like to be connected and then she just stop and say wireless network not found then more recently the laptop has not yet locate the wireless network.

  I use a Belkin F5D7633-4 wireless router and when I update the calld their Helpline, they helped me to install the firmware for the router that has seemed to work for about 10 minutes and then the problems started to come back. They recommended that I update my card drivers - can someone tell me what it is and how I do my laptop. I am desperate to solve this, because I'm having to use the yellow cable between the router and the laptop just for surfing the net.

  Can someone help me?

  Thank you
  Mark

  Hello

  If there is no possibility try test your WLAN functionality with another network wireless (friend or maybe in your company). On this path, you should be sure if the problem occurs only with your WLAN.

  Try to install the driver for your WIRELESS Intel network card. You can find it under http://downloadfinder.intel.com/scripts-df-external/Product_Filter.aspx?ProductID=1847&lang=eng

• Satellite L500-128 - slow connection to wireless network

  I have a problem with my Toshiba Satellite L500-128.

  After I installed Windows 7 Ultimate, my laptop is very very slow at startup. He hangs on to my wireless network connection or non - wireless (no matter whether I am connected to a cable). At this point, Windows has already started, but has not loaded al my applications yet. After 1.5 minutes or so when it is connected to my network (or has decided that he cannot connect because I'm not connected to a network), it continues and all is well.

  I already installed the latest network drivers. I have a Realtek PCIe FE Family Controller and an Intel Wifi Link 5100 AGN.

  Is there anyone who has this problem and fixed it?

  Hello

  I had a similar problem on Windows XP... The problem is that I used my router DHCP service it takes up to 1 minute I could use the laptop. I searched a bit here in the forum and I tried to use static IP addresses instead of DHCP from my router service: the problem has been resolved! :)

  Please try static IP addresses and update the firmware on your router!

• Re: Satellite C660 - 29G does not detect wireless networks

  Hello.

  I own a SATELLITE C660 - 29 G PSC1LE, bought in Spain.

  Once shaped my development pc, I installed Windosws 7 64-bit.

  As I lost the DVD attached to the purchase of the laptop, I have downloaded all the drivers for my model based on the Toshiba site

  I installed all the drivers and the thing is that the wireless card is most recognized. I can´t see WiFi available.

  I connect to the laptop with a cable to get access to the internet and it works properly.

  Could you please help me?
  Thank you.

  You can first test what is the status of the WLAN card in Device Manager?
  Wireless network adapter installed and registered correctly?

  If yes do not forget the wireless network card is enabled.
  Please check and post comments.

• Satellite L500 - battery will not charge

  4 sorry my English.
  I have a Satellite L500 and I installed Preview windows developer, all good until my battery.
  Now it does not load. What should I do?

  > Now it will not load.
  Not even when the laptop is turned off?

• Photosmart C6380 installation: do not find wireless network

  I set up the printer according to the instructions, but he refuses to 'find' my wireless connection. I typed manually with the WPA, no luck. I moved the printer within a few inches of the router still no luck. It seems to be several other 'networks' that I'm not familiar with. I printed the wireless network Test report, but have no idea how use the information on it. I'm on cable, I have one router Netgear wireless... what else do you need to know to help me understand this? I tried to look for answers here, but I don't understand the terminology used in most of the questions OR answers.

  I don't know how, but the number one problem is solved - this morning, the network printer is no problem, says it is connected and says that the signal strength is excellent.

  I now have another problem... When you try to install the software, I get a message that says "Search is complete, any configured printer not found."  I probably need this post in a new thread?  sigh.

• HP c309g not finding wireless networks

  Hello

  I bought a HP Photosmart Premium all-in-one c309g (the one I have is the second than the first had the same problem and I sent a replacement, but now I wonder if I could possibly have two defective models in a row?)

  Anyway, my router is an Orange Livebox (Inventel), running from the v5.10.7-uk. firmware I know the SSID and the key, but the problem I have is that when you run the Wireless Setup Wizard, it just sits there on "search... wireless routers "(the progress bar is moving, so I guess it's actually by train). So, my first thought before was that he could not be a problem with my router, as the printer was not picking up six other my laptop WLAN captures in my front room. However, I checked and all wireless networks I see on my laptop is networks 802.11 g, which led me to my next thought...

  ... is the printer using a wireless adapter 802.11n? The livebox I have is that 802. 11b / g (I think, not surprisingly Orange documentation is terrible and I can't find the information out in the admin pages - choose this place on the web, but it could just be 'b'). However, shouldn't the "n" adapter still be able to pick up the networks 'g' (part of the standard?)

  Any help would be appreciated, I can't believe that I have two defective devices in a row!

  See you soon,.

  TK

  I was wrong - I've got it finally works! Nothing to do with my router at all!

  Basically, I connected the printer on a wired connection and traveled to the web interface. There, I found some additional configuration settings that were not available through the USB connection or on the LCD of the device interface. Specifically, in the "wireless (802.11) Interface' layout (http://printerIPindex.htm? cat = network & page = wirelessAdv), on the"Advanced"tab, there is a checkbox that allows the radio operate in mode 'b' (in an infrastructure network use 802. 11b behavior.) I enabled the wireless radio, checked this box, you click on 'Apply' and then disconnected the ethernet cable and hey-presto, a printer wireless to work! I can now browse all settings that are documented, and it is connected.

  If anyone who works for HP is reading this, maybe an update of the documentation (paper and online) to discuss this feature 'Advanced' allow compatibility 'b' with a "n" radio would be very useful for millions of us who have not bought a "n" router yet

  Thanks again for the contributions.

• Computer can not find wireless networks

  Hello

  Whenever I restart my computer I have to open the part of the CPU and re services - enable Automatic Configuration Wireless for my computer to recognize networks wireless in the region. After that I then have to go to the Advanced Options in the wireless network connection properties, and then click the "use Windows to configure my wireless network. Then at that time, I can connect to my wireless router. I know that this is not normal on XP, because I've used it before, but before that I took off my computer Vista and installed XP, I had none of these problems.
  Thanks in advance

  Have you installed the correct WIndows XP driver for your device without wire against the manufacturer (and their software that can replace software config wireless XP.)