Satellite L500 - cannot adjust the brightness of the screen

Similar Questions

• Cannot adjust the screen resolution

  I tried to reset the setting on my resolution for my windows monitor XP WITH SP1, boots upwards in mode 4 by default bits. I'm under System 32 and before I tried to download updates for SP2, WAS in MEASURE of HAVING 16 BIT COLOR, cannot adjust the screen resolution, it is locked on 640 x 820. How can I fix it?

  Hello

  What Dell? Dimension? OptiPlex? Inspiron? Others? In the meantime, I'm looking to see if there is only a single 2300.

  I repeat...

  You just do a new installation of a Windows CD?

  If you have, you will need to install all the drivers concerned material, including graphics drivers.

  Click on start, run, then type devmgmt.msc and press ENTER. In Device Manager there devices not identified or marked as having a problem (marked with!)?

  Tricky

• Satellite L500 - cannot run the DVD-ROM games

  I am currently having problems with my Toshiba Satellite L500 series. The problem is, I can run purchased audio CD, as well as DVDs of the films, but I can't run games DVDrom. Music CD will automatically start Media Player very well, as well as films in their corresponding players... Games (like Dragon Age Origins and Left 4 Dead) DVD - ROM cannot read, or be recognized. When I go to "Computer" and try to access the game, it says "no available disk. Please insert disc into drive D: ". So from what I understand, the CD/DVD-rom may not be completely broken if he reads all types, except for games to DVDrom.

  Can someone help me with this please! It is quite frustrating because my computer is just now to a year! I wouldn't think that all computer companies sell computers that fall apart after a year... I was hoping that it was different with Toshiba.

  Once more, the CD/DVD-ROM can read CD and DVD of the film, but NOT the games to DVDrom. Help, please! Thanks in advance!

  Hi adecker,.

  Maybe it s caused due the upper and lower filters in the registry. You should try to remove as you can read in this article in the Microsoft Knowledge Base:
  http://support.Microsoft.com/kb/314060

  I had a similar problem that some discs can't be read more. And I went thorugh based forum to clean the CD/DVD drive lens with a microfibre cloth. Be careful if you do this and don't scratch the lens.
  Check this box!

• Satellite L500 - cannot install the Intel video driver

  Ok
  complete failure of the hard drive, no recovery cd was created, reloaded windows 7, looked up and downloaded the drivers from Toshiba, BUT there are only two video drivers listed, amd and Intel, both marked "for model only supported" its an Intel machine so I tried the Intel driver but it doesn't install, it just closes which I believe if the corresponding material is not found is the default action for these drivers.

  But I'm stuck with 'standard VGA graphics adapt' all other drivers loaded perfectly, (I installed the driver from chipset Intel first and rebooted, so it should be ok but it s not)

  Any ideas?

  Rgds
  SYB

  What Satellite L500 you exactly (L500-xxx)?
  Do you use 32 or 64 bit OS?

• Satellite L500 - cannot activate the WLAN on FN + F8

  Hello to all users of Toshiba, Ii'm new to computers laptop Toshiba, this one beeing my 1st and iIhave a well-known problem, I read on the internet.

  I recently bought a Satellite L500-13W. It has Realtek Wifi and comes with Vista OS. I deleted Vista OS since I have the license to the retail of Windows 7 Professional and Windows 7 top intalled. All work well, Audio, video, everything outside the wireless card. I enabled from the BIOS and everything and yet when I press FN + F8 it does not activate. The drivers are properly installed, as Windows 7 brings the upgrade of drivers. He said that the card works fine, but it does not turn on and search for Wifi signals. The Orange of the WIFI led does illuminate not.

  If anyone has a solution for this problem, I would be very grateful. I don't know what can be the problem, the software or the hardware.

  Advice me please. Thank you.

  Hi Darius1990,

  > Drivers are properly installed, as Windows 7 brings upgrade drivers
  This means that you have installed the Windows update WIFI driver and no official site of Toshiba, right?
  Well, in this case, I would try the prétestées WLAN driver from Toshiba. So you can make sure that it s not a WLAN driver related problem. Just check the WLAN from Toshiba Portal:
  http://APS2.toshiba-tro.de/WLAN/

  Have you tested other FN keys combination?
  If they don t work too you must install the package of added value and utility to Support Flash Cards because these two tools to control the function FN key and are important to use them correctly.
  ?

• Satellite L500-1XD - why the screen jump when running on batteries?

  I recently bought my L500 and it works very well when it is connected to the electric network, but when I running on battery the screen jumps and flickers.
  I was told to look at the BIOS but that seems fine.

  Any ideas?

  Thank you
  Kate

  Jumps and flickers?
  The same happens when you use different power management?

• Satellite A200 - cannot adjust the brightness of F6/F7

  Hello world

  First of all, excuse me for my English ;)

  So, I am owner of an A200 and I install my own copy of Windows XP because I don't like Vista (like many...).

  Under Vista, my FN - F6 or FN + F7 strives to set the brightness, but NOT XP. Can I use the FN - ESC to mute, etc, but NOT the function FN - F6 and FN + F7.

  I install the application 'Save energy', but after a reboot, it does not work. I see the icon (a small battery with both hands... one each side of the battery), the energy saver works because if I unplug my laptop, the brightness drops by a few degrees (and the icon for a bulb change 'orange'.

  So, here, something I miss to install or I did not properly confugure?

  Thanks for helping me!

  Update you the BIOS to the version of Win XP?

  This is necessary, because without this BIOS update some features of the laptop as FN keys would not work properly.

• Cannot adjust the brightness after display driver update on Satellite L855-118

  Hello.

  I just bought a SATELLITE L855-118, with ATI graphics card today, it was between this and another of them, but I know that you have problems updating graphics drivers on a portable Sony.

  I did a restore point.

  So I uninstalled the ATI catalyst graphics card and then did a sweeper driver and rebooted and then installed catalyst 12.6, installed fine, but my screen went to the maximum brightness and I can't adjust, BRIGHTNESS osd is displayed but the brightness of the screen does not change.

  So I used my restore point.

  This time I crushed the catalyst 8.9 with 12.6 stock, still cannot adjust the brightness.

  Someone knows how to solve this problem.

  My spec full in the link below.

  Satellite L855-118 - product specifications - Toshiba

  Thank you

  John.

  You mean that you can not use the Fn or Fn + F6, F7 button combination?
  Do other combination works properly?

  Also check this doc:
  http://APS2.toshiba-tro.de/KB0/TSB11033A0000R01.htm

  There is a brightness.zip that installs the additional registry key

• Re: Satellite L855 and Windows 8 - can't adjust the screen brightness

  Hello world!

  I installed Windows 8 on my L855 Satellite and it is running pretty well except that I can not adjust the screen brightness. I have updated all drivers for win 8, but it does not solve the problem.

  Hope someone can help me! Thank you!!

  Can you do this using the settings in some diet plan?

• Pavilion 15-r004ne: cannot adjust the brightness of the display

  I m using the Pavilion 15-r004ne on a windows 64-bit OS 8.1 and I cannot adjust the brightness of my screen. I tried to adjust by shortcut keys F2 and F3, tried adjusting via the mobility Center, tried through Control Panel and so on, but no response until now. It shows the little pop-up when I press the keys. But nothing has changed, the brightness of the display remains the same. in order to get solution soon.

  Thank you for your support. It didn't work either. I solved the problem of roll back the driver and update again.

• Cannot adjust the brightness in Windows 7

  I have recentlly installed win 7 rc on my G530 and I cannot adjust the brightness and more. I have download the hotkey driver features that now allows me to adjust the volume and everything but the screen brightness... y at - it a specific driver, I need to download for this? Thank you.

  Nevermind I solved this isue. I have download Lenovo Hotkey features and executed the file as administrator with Vista compatibility mode:

  http://www-307.IBM.com/PC/support/site.WSS/MIGR-68000.html

  problem solved. I also updated the bios.

• Satellite L500-1DT - HDD the smart predict service failures

  Hello

  I have a Satellite L500-1DT and the last days he started to say "your HARD drive has the smart predict function failures"-is that what I did for her or is it a problem to manufacturers? I only got two months.

  Anyone know if I can fix it myself?
  I have just in Spain and I'm here for the next two months.

  I'm useless with technology...

  Any help would be good.

  Thank you!!

  Kate

  Please don't fix anything alone. New notebook has warranty valid so if something goes wrong the affected parts must be replaced and warranty will cover all costs.

  Visit THIS page and read what means SMART.
  In other words, your HARD disk goes wrong so please back up all your important data and contact the nearest Toshiba service provider and ask for help.

  I don't know where you live in Spain, but to find the nearest Toshiba authorized maintainer visit the Toshiba support page under
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an ASP contact them as soon as possible.

  Good luck!

• Trying to repair XP Home CD, but cannot access the screen where you choose to repair or install fresh.

  Trying to repair XP Home CD, but cannot access the screen where you choose to repair or install fresh.

  I get the first screen where you have the choice to configure windows or press 'r' for recovery console.

  After I press enter for the installer, do not me the usual on-screen next where it is said that if the following XP installation is damaged, you can repair it.  Instead, it leads me to a screen where it shows my partitions and asked that one I want to install windows on.  If I choose "C:" he then told me that there is already a system opperating on the partition...

  Hello

  Follow the steps of "Error Message: Setup cannot set the required Windows XP Configuration Information.
  ' http://support.microsoft.com/kb/316425 '.

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot run the screen saver because it requires a newer video card or one that is compataible with Direct3D.

  Hello

  I recently rebooted my computer; (Packard Bell) and now cannot run games or screen savers because it does not start. I think my problem has something to do with a Direct3D card? When I run screensavers, I get this message:

  Cannot run the screen saver because it requires a newer video card or one that is compataible with Direct3D.

  I have the impression that sound when I run the 3D games, such as minecraft or GMOD.

  I run on Windows Vista Edition Home Premium and does not do anything but re - install my computer because it wouldn't start.

  It is not as if the graphics card is not there, so I'm really confused!

  Please help me, like playing games is my favorite thing. ;)

  Charlie

  I also ran minecraft to double check and I got this error code:

  Bad video card drivers!

  -----------------------

  Minecraft could not start because it did not find an accelerated OpenGL mode.

  Generally, this can be corrected by updating the video card drivers.

  -BEGIN 7fe0271 error REPORT-

  Generated 10/10/12 21:04

  -Minecraft Version: 1.3.2

  -Operating system: Windows Vista (x 86) version 6.0

  -Java Version: 1.7.0_07, Oracle Corporation

  -Version Java VM: Java hotspot Client VM (mixed mode), Oracle Corporation

  -Memory: 422585352 bytes (403 MB) / 518979584 bytes (494 MB) up to 1037959168 bytes (989 MB)

  -JVM Flags: 2 total; Xms512m-Xmx1024m

  -LWJGL: 2.4.2

  -OpenGL: ~ ERROR ~ NullPointerException: null

  -Is Modded: Probably not

  -Type: customer

  -Texture Pack: ~ ERROR ~ NullPointerException: null

  -Position profile: N/A (disabled) [can't get system (java.lang.NullPointerException) properties]

  org.lwjgl.LWJGLException: Pixel format not accelerated

  at org.lwjgl.opengl.WindowsPeerInfo.nChoosePixelFormat (Native Method)

  at org.lwjgl.opengl.WindowsPeerInfo.choosePixelFormat(WindowsPeerInfo.java:52)

  at org.lwjgl.opengl.WindowsDisplay.createWindow(WindowsDisplay.java:185)

  at org.lwjgl.opengl.Display.createWindow(Display.java:311)

  at org.lwjgl.opengl.Display.create(Display.java:856)

  at org.lwjgl.opengl.Display.create(Display.java:784)

  at org.lwjgl.opengl.Display.create(Display.java:765)

  at net.minecraft.client.Minecraft.a(SourceFile:233)

  at net.minecraft.client.Minecraft.run(SourceFile:516)

  at java.lang.Thread.run (unknown Source)

  -REPORT of ERROR END bb61788b-

  Hello

  After you reinstall the operating system, you should also go to the website of your computer manufacturer > drivers download section > put your computer model number > search for your operating system and drivers (graphics, audio, etc.) > download and install.

  See you soon.

• Cannot adjust the brightness of the screen and the sleep will not work Satellite P750/P755

  On my P750/P755 Satellite I am unable to adjust the brightness of the screen.
  I can move the scale but nothing is happening on the screen.

  Also in the last two days not possible in mode "sleep" as it did before, even though I haven't changed anything.

  What did you do with your computer laptop last days?
  On this virtual path, it is not possible to say what the problem is here.
  You have installed updates? I mean all this can happen without reason?

  Have you tried to roll back the OS to an earlier time to check the functionality?
  And Yes, do you use the original pre-installed OS that you got with your laptop?