Satellite L500 connection ok but no Internet after upgrade to Windows 7

Hello
I just upgraded my Satellite L500 to Windows 7 everything is fine except that I have no internet access. I have a strong connection to my wireless home network and can connect to other wireless devices to the network ok. I also tried to connect using cable, but I have the same problem - connected but no internet access.

I ran ConfigFree utility and it does not find a problem. I ran the troubleshooter in Windows and it is unable to solve the problem but tells me that the wireless network doesn't have a valid IP configuration.

I have reset the modem and the router, without effect.

I checked all the drivers and BIOS are the latest versions.

I tried to enter an IP address manually rather than get an automatically. Still no luck.

Any ideas I can try? I hope someone can help.
Thank you.

Hello

For me it sounds like that the problem is the router, and not the laptop because you wrote that with cable connected even happens on WLAN connection.

If you go into the menu of the router, what is the status of the internet connection? Your router has a connection or not?

Tags: Toshiba

Similar Questions

  • Satellite L550 - no access to the Internet after upgrading to Windows 7

    Hello

    After the update with the Toshiba Windows 7 upgrade offer I can't connect wirelessly to the internet.
    With LAN, I can connect to the internet.
    I bought a few months ago a Satellite L550 with pre installed vista 32 bit. Internet and connect to my router worked fine under Vista. But after installing the upgrade to windows 7 I can't access the internet or my router more.

    I first thought the router (Siemens gigaset sx551) vice and contacted my provider, they had me send a new router (Thomson TG789vn). The router and the laptop don't see each other, the signal is very good but I can not connect.
    I hope someone can help me because I don't know what to do next.

    PS. excuse me for my bad English

    John

    Hi mate,

    I founded similar topics that may be interesting for you:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=49617
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=49627

    If you look in the forum of wireless issues you will have multiple threads. Check first, and then you can give us a feedback if it works or not now.

    Good luck! :)

  • Connection problems wireless Broadcom 1704 after upgrade to windows 10

    Connectivity problems after upgrade to windows 10 intermittent wireless;  Have an Inspiron 5748 with adapter Broadcom 1704.  Driver is up to date: 7.35.295.0.  Diagnostic shows no problem with the unit.  Will be generally connect to the network, but the connection is deleted intermittently.  Troubleshooting to solve using leads to restore connectivity, but it will then drop again intermittently.  Never experienced problems before windows upgrade 10.

    steveshuff,

    Here are a few parameters to change on your adapter wireless for better performance.

    Turn on and off then on all devices on the network

    1. Turn off the power to the broadband modem and let the modem broadband disconnected for at least 3 minutes.
    2. Shut down all computers that are connected to the network.
    3. Remove power from the wireless router.
    4. Check that a network cable is connected the modem to broadband in the Internet or the wireless router's WAN port.
    5. Check that no series cables or USB are connected to the Modem on broadband.
    6. Connect the power supply to the modem broadband. Wait at least 2 minutes for the Broadband Modem to initialize.
      (If the Modem does not provide Internet connection successfully, unplug the Modem. Wait at least 5 minutes, then plug the Modem back.)
    7. Connect the power supply to the wireless router. Wait at least 2 minutes for the wireless router to initialize.
    8. Turn on the computer and try to connect to the Internet.

    Difficulty of wireless network connections

    Turn off airplane Mode

    For Dell Wireless adapters:
    1. In the Search box, type Device Manager.
    2. Press or click (Control Panel) Device Manager.
    3. In the Device Manager window, click on the sign of the arrow next to network adapters.
    4. Double click or double-click the Référence Dell Wireless WLAN Card.
    5. Click the Advanced tab.
      Note: These options are not available according to the installed wireless adapter.
    6. In the property: box highlight AP Compatibility Mode, select broader compatibility under value: from the menu drop-down.
    7. In the property: box, highlight the Minimum energy consumption, select disabled under value: from the menu drop down.
    8. Click OK.

    For me, to help troubleshoot, please click on my DELL-Jesse L and send me a private Message with the number of Service Dell and your Dell order number.

  • Satellite A300D-15B - Webcam does not work after upgrade to Windows 7

    My webcam does not work after upgrade to Windows 7. I installed the drivers but still having no luck

    Hey Buddy,

    What does it mean exactly when you say he won t work?
    You get an error message or only a black image? What model of laptop you have and that you use the Toshiba Windows 7 upgrade kit or a disc of Microsoft?

    At this moment I can only offers to install latest driver of the webcam of the official website of Toshiba. Make sure that this driver is released for Windows 7 and not Vista.

  • Compaq Presario C772TU l: I am not able to connect to internet after upgrade to Windows 10. It doesn't have the drivers LAN or WAN

    Hello
    My laptop computer with the Compaq Presario C772TU model number has no internet connectivity fade via LAN or Wifi. There are no drivers. Until now I was using windows 7 (64-bit), and it worked very well. After 10 of Windows it cannot find the drivers!

    Please help me to get the drivers. If I go to HP, they have drivers for Windows Vista, which installed but does not work only! Help, please.

    Hello:

    The ethernet card, the only suggestion I can offer would be to try the W8.1 directly from Realtek drivers.

    First driver on the list.

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=6&level=5&Conn=4&DownTypeID=3&GETDOWN=false

    Do you know what model of wireless network card your PC came with?

    The list of parts does not help me because it shows that there may be one of 3 different model wireless network cards.

    If you are unsure, please do the following so I can understand what your laptop's model card...

    Go to Device Manager.  There should be a category of other devices containing a list of devices that need drivers under this category.

    The wireless card is labeled as a network controller.

    Click the network controller device, and then click the Details tab in the upper part of the window of network controller device.

    Now you should see a drop-down list of property and it is set by default to the Description of the unit.

    On this list and select the 3rd point (Hardware ID).

    After the first string of characters you see in the window.

  • Satellite L500 - FN keys does not work after upgrade windows 10

    Good afternoon

    I just upgraded to 10 Windows on my Satellite L500 and have noticed that none of the FN keys work.
    Is there a driver that; A is available and B where it can be downloaded.

    Thank you

    Usually Win 10 drivers can be downloaded here but only to win 10 supported units
    http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

    Unfortunately, the L500 is not listed a Win 10 supported phone model.
    http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

  • Cannot connect to Internet after upgrading to Windows 7 64-bit Aspire M5100

    I upgraded from Vista Home Premium 32-bit, Windows 7 Home Premium 64-bit. I have a Marvell yukon 88E8056 PCI-E Gigabit Ethernet Controller. I tried updating the driver, but it has yet to solve the problem. I am able to connect through a usb wireless adapter.

    I noticed someone had this problem with a M3100 and the solved the problem by replacing the Ethernet card. I hope that I don't have to do since I've upgraded to Windows 7 using an OEM version. As I understand it, you can change to any material after I installed the OEM version.

    When I ran the Windows 7 Upgrade Advisor there was compatibility issues: 1) the card Ethernet, 2) graphics card.

    He said go to the device manufacturer's website and download the latest version of the driver. I thought that's what I did, but it still doesn't work. I have all the 'exclamation points"in the Device Manager. Everything said that it works correctly.

    Maybe I'm not download the appropriate driver. Should I just go for the driver and the driver update rather than choose one myself and downloading?

    If I end up installing a new Ethernet card going to work?

    Any suggestions?

    Good. It's just to install and configure the new network card. If all goes well, assuming that Murphy does not, it should be easy sailing! Let me know how it goes.

  • Cannot connect to internet after upgrading to windows xp professional version 2002 service pack 1.

    Hello

    My labtop is hp nc6000. I have upgraded to windows xp professional version 2002 service pack 1 and I can't connect to the internet.

    I used another computer desktop to download service pack 2 and 3, but still cannot install these due to no internet connection.

    I also tried to upgrade the drivers of hp nc6000 obtained from another computer, but received a message that the package cannot be decompressed - another copy must be obtained.

    Please help with kindness.

    Thank you.

    Are you trying to connect wireless or ethernet cable? Have you checked your connections are enabled? If you use the wireless option, you use the hp or windows connection manager?

    I sugest you try to connect with an ethernet cable and go to the network connection in Control Panel and check if your local connection is enabled. If you connect through a router has the DHCP settings.

    If you use the wireless you will need to enter the connection as a new SSID and key details

  • Satellite A300 - Chicony webcam does not work after upgrade to windows 7

    I'm frustrated so I came here to see if anyone knows a way to help solve this problem.

    I have a Toshiba Satellite A300, which came with Windows Vista 64 - bit pre-installed. After about a year or two to have the laptop, I decided to upgrade to Windows 7 64 bit. In the process, I believe that the driver of my webcam (Chicony usb 2.0 camera) has been eliminated.

    When I go into the Device Manager in the Control Panel, the webcam is not listed; nor is "imaging devices."

    I tried to download the driver manually, but I get an error message "Webcam open fail." Restart the computer or the camera. »

    My computer has registered my webcam as 'unknown device '.

    If anyone knows how to solve this problem, please, I beg you, let me know.

    > My computer has registered my webcam as 'unknown device '.
    > I tried to download the driver manually, but I get an error message "Webcam open fail." Restart the computer or the camera. »

    This means that the the webcam driver is not installed correctly.
    Visit the page of European driver of Toshiba and install the software/driver webcam just for this model of laptop.

    If the installation fails, restart the laptop and the tent.
    This should solve the problem.

  • No internet after upgrade from Windows 7 to Vista__

    I bought a copy of the Windows 7 upgrade to Vista when I bought a Dell computer.  After loading it on my laptop, I am unable to access the internet.  I learned that some drivers are missing.  How can I solve my problem?

    Windows Update has nothing to with the upgrade of Windows. Please post your problem here instead: http://social.answers.microsoft.com/Forums/en-US/w7network/threads

    See also: http://windows.microsoft.com/en-US/Windows7/why-can-t-i-connect-to-the-internet ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Satellite L300: Could not find burning software after upgrade to Windows 7

    Just do an upgrade and can't find the software CD/DVD burning.
    What it should be and where can I find/reinstall it?

    I think it is Roxio. TIA.

    Hello

    Additional requests from different manufacturers that were pre-installed on computers laptop Toshiba cannot be downloaded because of the licensing problem.
    You can download only the Toshiba software.

    I found the Toshiba Disk Creator on the Canadian driver Toshiba page:
    http://support.Toshiba.ca/support/download/ln_bymodel.asp

    Here you can choose a Satellite L500 for example and you can find the Toshiba Disk Creator for Win 7 32 bit and 64 bit.

    Welcome them

  • Satellite A200 - FN keys do not work after upgrade to Windows 7

    I recently updated my A200 to Windows 7 32 bit. Since upgrading my FN key no longer works. I can't find the correct driver.

    Anyone having the same problems? Or anyone with a solution?

    TKS
    Praepositus

    Hello

    The fact is that not all the models Satellite A200 with Win 7 drivers released.
    Technical support VAP utility and flash card is important.

    Added value package was released for most Toshiba laptops
    Card Flash Utility is available only for a single series.
    For example, Sat L500 contains Flash Cards Support utility download and install it!

    He that will not help so I doubt that you will get the FN button work

  • Satellite L50 - A - 1 6 - DVD problems after upgrade to Windows 10

    As the title, the player is normally recognized by the system, but put any media in the drive is not read and that is why it is always empty.
    What could be the problem?

    Thanks to you all

    I guess saying DVD player you mean the STRANGE-> optical disc
    First I would recommend you to check this page for troubleshooting MS:
    https://support.Microsoft.com/en-us/...drive_problems

    It fixes the problems with CD or DVD players that cannot read or write media

    In addition you can uninstall/remove optical drive from Device Manager.
    After the new reboot, Windows system must be able to recognize the STRANGE new and usually the most recent driver must be installed also.

  • Satellite Pro P100 - screen and sound problems after upgrade to Windows 7

    Hi all

    I got my Satellite Pro P100 (model number is PSPAEE-00C006EN and the second digit of the serial number is '7') upgraded from Vista to Windows 7, and since then, some bugs seem to have had place - can someone help me on the following:

    -L' screen DIMS increments, irrespective of the fact that I have saved my power settings to stay on FULL (battery or sector)

    -No sound. Once or twice, the sound card worked and settings to say this works correctly (and you can see the movement of the graphic equalizer).
    In terms of PC knowledge, I would be 5/10 (so not a dummy, but certainly not a pro! and we tried a lot of the more obvious things)

    Thank you all

    Hello

    1.) if the screen dim option doesn't properly work, I recommend you to reinstall Toshiba Value added Package. This package controls these functions, the keys FN and others. Visit the Toshiba page for an update!

    2.) did you check if the sound is muted if the equalizer work? In addition you can also try to update the audio driver might it work ;)

  • Satellite A-L50-1EK DVD not recognized after upgrade to Windows 10

    DVD does not now. I see device menager DVD but it have yelow attention icon. Have I can fix this?

    Try this:
    https://www.DriverEasy.com/knowledge...Maged-Code-19/

Maybe you are looking for

  • update of the elements of custer in an effective way

    Hello I have a group of 20 digital items. The problem, the user clicks on the items 1 and updates the value, element 1 runs continuously. Now the user wants to update the item 2 but item 1 does not stop and also element 2 should run continuously as p

  • LaserJet m127fw mfp: hp laserjet m127fw mfp can not sweep

    Hello My laserjet m127fw mfp scanner suddenly stop working without any reason. The printer is connected to the network. I tried to uninstall the drivers and the program, restart count it and then reinstall the latest driver from HP and it stil didn't

  • Screen hinge screws missing next to power button to Aspire 1830-3595

    I have 3 laptops Aspire model 1830-3595, 11 "screen, bought in 2011. Two of them lost the screw that holds the hinge on the left side next to the switch. In addition, the nut supplied with the hinge holding the screw broke off. Where can I get a new

  • What model is my laptop?

    I looked for a sticker, it is not a. I looked in the Help Center, it's just HP ENVY 17 to say that NOTEBOOK So I do not know where to find the model number for the following list LIST see you soon

  • BlackBerry in Eclipse (JDE) project import

    Hi all I have a problem with importing a project of BlackBerry of P4. I installed the BlackBerry JDE for Eclipse plugins, I can create new projects, but I have problems when I import a project from P4. In the P4 plugin, if I click on a directory, and