Satellite L500 - keyboard does not work

Hello

I have Vista L500 with a dead keyboard. This machine has not been abandoned or anything it is spilled on it. I plugged USB keyboard external that works. The laptop keyboard does not work. I flashed the BIOS, update drivers, held shift for 10 sec (read on another forum), reset computer, check the updates of Windows Vista and ran 3 checks of Virus.
Everything is perfect, just no keyboard?

What should I check? What is a motherboard problem?

Thanks for any help :)

Hello

Can enter you the BIOS (F2 key) with internal keyboard?
If it isn't the internal keyboard seems to be defective and must be replaced

I don t think you can do more. I mean you've tried everything what is possible and if an external keyboard works the installation of the OS should be ok.

The keyboard can be ordered and replaced from an authorized service provider. Do you know how to contact the guys?

Tags: Toshiba

Similar Questions

  • Satellite A300 - keyboard does not work sometimes

    Hello

    the boot of my Toshiba Satellite A300 computer laptop keyboard doesn't work sometimes?

    After a reboot, everything is ok!

    Anyone know why the keyboard does not work sometimes?
    Greetings

    On this virtual path, it is not easy to give you a precise answer, especially if it happens sometimes and I think that you need professional help with this.

    There may be a connection between the keyboard and the motherboard problem.
    I fear, we can only speculate that the problem can be m.

  • Satellite C660 - keyboard does not work but the Num and caps lock shift are on

    I have a Satellite C660 which was working fine this morning. When I came home from work and he turned, the keyboard does not work and therefore can not enter my login information.
    The Num and caps lock shift are turned on.

    Any ideas on how to solve this problem?

    Hello

    You are able to disable the CapsLock and NumLock?
    You can access the BIOS by pressing F2 by turning on the device?

    If this does not work, I would recommend checking an external USB keyboard.
    If the USB keyboard would be functions, then this means that the internal keyboard is defective and must be replaced.

  • Re: Satellite L500 - Wifi does not work after Windows Update

    The wireless on my Satellite L500 worked perfectly before you update windows. However, after the updat when you try to connect to a wireless connection, it says that "no connection is available.

    I then clicked on fix to try to find a solution. Then the message "the diagnostic policy service does not work. Using Ctrl + Alt + Delete I went on services and attempted to start the DPS manually, but the message "Diagnstic political service on Local computer started and stopped. Some services stop automatically if they are not in use by other services or programs. »

    This message puzzled me enough as it is said that the Wifi is infact on however in a attempt to FN + F8 F8 option does not appear. Any help would be greatly appreciated.

    Hello

    For Satellite L500, there are already some threads here in the forum:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=186764
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=178629
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=188577

    Additionally, make sure that the DHCP and DNS services are running. Type of startup is set on "Automatic" and try to restart both services.

  • Satellite M30 - keyboard does not work

    Hello

    I have a problem with the keyboard of my laptop:
    Since I was able to type the password of the BIOS, it should be correct from a technical point of view.
    But once having written the pass BIOS keyboard no longer works. It just doesn' react - it is even impossible to hit F2 to open the BIOS menu.
    XP / system displays all hardware conflicts.
    The laptop do not fall down or something like that.
    I bought a USB keyboard, and it worked correctly from the start.

    I tried every shortcut I know and a lot I didn't know until now, but it still does not work.

    Is there a shortcut XP or Toshiba to disable the keyboard?
    Or do you think this could be a hardware problem - but why it should be possible to write the password...?

    CU
    Matthias

    [Edited by: admin on 22 July 05 18:02]

    (1) your bios can recognize an external input device and causing the keyboard not working after giving you access.

    (2) remove all other usb devices you have connected (mouse, webcam or other) because they could be interpreted as an external keyboard

    (3) if there is no USB device connected and the problem persists... remove your keyboard drivers external usb while you plug it (remove drivers dethrone device) and before you restart your computer, make sure to remove the external keyboard.

    (3) you can have a software virus recorder or a keyboard that connects to the interruption of your keyboard.

    If none of these permits, try to boot in an o/s different as the knoppix linux that runs directly from cd without need of installation. If your keyboard did not always works, then bring it to support, because the internal flat cable might came down in part.

    Good luck

    George

  • Satellite A60: keyboard does not work, the recovery DVDs cannot run

    Hello

    I have a serious problem with my A60: the keyboard no longer works. I tried many solutions and the last of them, recovery with the Recovery DVD - ROM product does not work, because I can't use the keyboard!

    When the screen with the 3 choices, I have no opportunity to respond.
    Someone has an idea?

    Thanks a lot for your answer.

    They keyboard might not be the problem, or it may not be connected properly to the motherboard the best thing to do is to take it to a service center, it should not cost you anything, if it is still under warranty... but if it's just the keyboard and your laptop is out of warranty then it should cost more than 100-200... can't say how much exactly, because I have no idea.

  • Satellite C660 - keyboard does not work

    Hello world

    I've recently updated the BIOS to version 1.60 on my PSC0LE C660-02300JEN (1 year) and the keyboard doesn't work well at all and sometimes stops working completely, making it unusable (I write on an external USB keyboard.).

    There was a recurring problem, a few months before I updated the BIOS with the strike being delayed or does not respond, sometimes when you type, but for the most part, it still worked.

    So I've updated the BIOS, as suggested, and I get the following problems:

    The space bar is either not responding or when you press + 2 written or +++ again and again until I stop it by pressing the SPACEBAR again.

    None of the numbers works.

    Sometimes the entire keyboard no longer works and none of the keys of a reaction.

    I tried solutions:

    Remove the battery.

    cleaning the keyboard to get whatever it is dislodged out under the keys.

    Reinstall the version 1.60 of the BIOS.

    I'm not sure what to do next and really appreciate the advice and help before I try to get the keyboard replaced. It would be nice to get an opinion before I gain for a fix.

    Really welcome responses.

    Thank you very much

    Patrick

    Hello

    I think that this problem of keyboard is not related to the BIOS update not to other software.
    Is that you can use the external USB keyboard as you said above this means that the BIOS is ok and also the functions of controller keyboard correctly

    This means that the problem is related to a malfunction internal keyboard. I have no explanation why this happened after the update, but it could be just a bad luck

    In my view, the problem can be solved by the replacement of keyboard.

  • Satellite A300 - keyboard does not work after cold start.

    Hi people,

    I inherited an A300 of questions.

    When you turn on the laptop, the keyboard works at the BIOS level, but once it boots into windows keyboard no longer works. I discovered that by pressing the power button (stop) and then turn the laptop back on brings back the keyboard. (It was in vista).

    Since I did a new install of Windows 7 (removal of all partitions on the disk) and the fault remains, I also installed the added value Pack which did not help.

    Firmware was 1.6 - updated to 1.9; fault remains. I restored the factory settings in the BIOS - fault remains level.

    I installed a copy of Fedora 11 (Linux), that works perfectly.

    Any ideas?

    Thanks for the comments.
    To be honest, I use an external mouse only.

  • Satellite M100 keyboard does not work

    I have a M100 and my keyboard used to work properly, but now it doesn't work at all.
    I havn't had very long and I wonder if there is some kind of lock key on it or if it is just fuck?

    Hello

    Unfortunately there is no key lock so it may be that your keyboard may be defective. Have you ever tried to connect an external keyboard to your machine to check if it works.

    Since there is definitely without a lock, there is a great possibility that you must bring your machine to a service authotized partner to make them fix this error.

    Welcome them

  • Satellite 1100 keyboard does not work properly

    My old Satellite 1100 works perfectly, but suddenly the letter 'B' and the space bar don't work at all. I clean under the keys without making a difference. Please check the connection to the motherboard? (Why this should suddenly I don't know failure.)
    I plugged an old keyboard via an adapter to the USB port, but this material is not recognized (although the keyboard lights). Download a driver for my old keyboard from somewhere?
    Any other suggestions?
    Thanks for any help.

    Hello

    First, there is no driver for the keyboard, because it s a main machine and it s connected via PS/2. If a keyboard that is connected to a PS/2 (and even in an internal PS/2 port of the laptop) won´t never ever need a driver.

    And with regard to the two keys: you can try it. There are just a few screws under the lid of the keyboard that needs to be unscrewed;), and finally, you check the cable. If you have not received some success
    a readjustment of the cable, then the keyboard is probably defective. In this case, it would be good to check ebay for parts for example.
    Usually, the reference of the keyboard must be printed on a sticker on the bottom of the keyboard.

    Please give some feedback, when it's...

    Welcome them

  • Satellite P10: keyboard does not work because of the liquid

    Hello!

    I spilled coke on my laptop... Fortunately everything works fine. The problem is that some keys on my keyboard are difficult to the press following the coca cola and I don't know how to clean it. Is it possible to remove it to clean?
    I have a Satellite P10.

    Thank you!
    Penny

    Hello

    Well, you can carefully remove the keys on the keyboard. Then try to clean it with a damp cloth. This should help.

  • Satellite L500-1R1 does not work on AC

    Hello world

    I have this model for about 3 years now.

    It stopped working and is not problem AC because I checked with both new...
    Although there is a green light when it is connected to the electric network. Battery is not so.

    Can I say goodbye? ;(

    Have you checked the RAM modules?
    Faulty RAM memory would prevent the laptop to boot the system.

    Since its very easy to replace the RAM modules, I would recommend trying this.
    Otherwise, it could be a severe motherboard issue and I guess in this case, the laptop repair can be a very costly affair.

  • Satellite L10 - keyboard does not work properly

    Hello
    I have problem with my keyboard. I have install Windows XP from recovery CD and make updates Windows Update form. Sometimes, when I write something ex 1234567890, I see on the screen 123567890 or 123456790.
    I took the laptop to the service and they said that everything is OK, but for me it is not!
    What's the matter with him, can someone tell me?
    Thank you

    Hello

    Compare the version of the BIOS installed on the laptop with the BIOS which is available on the Toshiba page.
    If you use the old version, then you can try to update the BIOS.
    I have read that sometimes, a new BIOS might help.

  • New keyboard does not work on Satellite L500-13W

    Hello.

    I have a Toshiba L500-13w (PSLJ3E-00X01G03) of the problems with the keyboard. The keyboard does not work. Already tested under windows, or to access the bios.
    I bought a new keyboard and changed. It does not work. Any way to solve this problem?

    Thank you.

    What happened with the laptop?
    You spill some kind of liquid on the keyboard maybe?

    The keyboard is connected to the motherboard with a flat cable
    If the keyboard on the motherboard controller was not damaged, then new keyboard should work

  • Keyboard does not work on my Pro Satellite R50-B-155

    Keyboard does not work on my Pro Satellite R50-B-155

    What is the reason for this problem?

    I guess that its dysfunction internal keyboard...

    From my point of few internal keyboard needs to be replaced to get it resolved.

Maybe you are looking for

  • Internal sorting/replacing characters

    I have a column of scientific names that looks like this: Canis lupus Savin ARGeo (haguel) Plumeria algers I want to remove all the brackets and their content, so the finished product looks like this: Canis lupus ARGeo savin Plumeria algers However,

  • How to resize / stretch XIB controls in the catalog?

    OK, maybe this is a silly question, but I simply can't understand!. What setting should I put in XCbode Interface Builder (using XIB to the catalog, no Storyboard) to have a repeating control / resize with parent control. Setting the option left / ri

  • HP pavilion 15-e026sr: HP Pavilion 15-e026sr CPU UPGRADE?

    I need help I want to upgrade my CPU (AMD APU A4 - 5150M to AMD 10 - 5750M) is it possible or not? laptop: HP pavilion 026sr - 15.

  • Partial cure for the problem of model Icon Editor

    I'm driven crazy by models Icon Editor behavior (which I love and use all the time).  What happens is I'll open a project, start to make icons with my set of templates (all saved in LabVIEW Data\Icon Templates\VI\BS icons) and especially if I've incl

  • How reformat disk external seagate to mac to vista

    I went to the seagate site, but with the external drive connected by USB, I can't see external to reformat and of course I don't want to reformat the wrong drive.