Satellite L500 will not load beyond the screen "Welcome".

Similar Questions

• New HP Pavilion will not go beyond the screen with the "HP" Logo and the "circle of points."

  I recently bought a computer HP Pavilion (HP Pavilion 10:10 - e010nr). It was my first experience with Windows 9.1, but everything seemed to go OK. Then, yesterday when I had to retype my password, the computer began to run very slowly and then seemed to lock-up; It would not do anthing. I held onto the "button until the computer turns off and then restarted. When it restarted, it didn't go beyond the initial screen that shows "HP" in a blue circle and the small circle of the small white watch points there work but nothing ever happens. (I tried this many times, but the same thing happens. If anyone can help me to go beyond this opening "HP" screen, I would really appreciate it.

  Hi Referee06. I understand that your computer does not load past the HP logo at startup. To resolve this problem, proceed to the section "the computer crashes to the screen of the HP or Compaq logo or the Windows loading screen" in this document: computer does not (Windows 8)
  
  Let me know how it turns out.

• Re: My Satellite laptop will not load to the top

  Hello

  My laptop isn't even a year yet, it worked fine until today.
  I turn it on and the bit of Toshiba comes up then after that it of just a black screen and then it says

  Realtek rtl810ie/8102e pci-e ethernet controller v1.07 (080320)
  PXE - e61 media test failure, check cable of
  PXE - mof exiting pxe rom.
  no boot device - insert boot disk and press any key

  I put t have a startup disk or anything! Fact does not matter what it means?

  Thanks for any help

  Layla

  Each book has specific boot order and in this boot order components of different material as drive optical drive, hard drive, or LAN.

  The start is always set in the BIOS settings and nothing, for instance HARD, LAN and ODD disk boot order. If the laptop can not boot from HDD ist starts from second defined device (LAN) and continue.

  Boot order of your laptop satellite does not for me, but somehow, it stays on the startup of the LAN device option and you can see this message on the screen.

  Restart your laptop, and press F2 to enter the BIOS settings. The default value and try again. If the same start arriving portable once again but this time with the F12 for boot options-enter key. With top and bottom arrows have chosen press and device disk HARD come. If the HARD disk is OK, OS should load up. If this is not the case, there is a problem with the operating system preinstalled.

  Please test and send feedback.

• can not go beyond the screen "Welcome".

  First of all, I am a beginner. When you try to open a session with my pass, I can't go beyond the ever-present "Welcome" message. I'm sure this has to do with updates and since I restored to my last AVG free antivirus from AVIRA, it seems to be to let me in. but I have restored many times, I'm lost! Windows vista service pack 2 has been updated the29th nov. then without success the next day; I loaded myself with success yesterday, to see this problem occurs again. How can I start to sort this please? I'm in France and having been told by a specialist of the useless that I just need to make sure that all updates are there. I read some of the queries on the updates... and I don't think it's as simple as that!

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  
  If you are referring to the welcome of IE8 screen, see http://www.winhelponline.com/blog/disable-ie8-tour-welcome-screen-runonce-all-users/ ... .but you should always get the Vista SP2 and all other updates installed.

  Tip-online never, NEVER use system restore to 'Cancel' an update, Service Pack, or upgrade of IE!  Instead, uninstall the update, Service Pack, or the IE patch & reboot.  If that does not resolve the problem, then try System Restore.
  
  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• c720 Acer can not go beyond the screen "Welcome".

  The continue button is not clicking. Help!

  Hello..

  You must have a WiFi connection and a Google account to sign in to your Chromebook.

  Try to connect as a guest, you have need of connection WiFi from Chromebook comes with the web-based operating system.

• Windows XP will not load past the Blue error screen

  Hi, wondering for a while if someone can help me...

  My xp system will not load past the Blue error screen that is displayed when the computer stopped suddenly or inadequate.

  No matter what are the measures that you choose to take (safe mode, the most recent configurations... etc) the system will just beyond the blue screen on the windows logo download page, where the loading bar moves about 10 seconds before returning to the blue loading page.

  So far I have tried to leave the computer as long as an unused months while I was abroad, remove the battery for varying amounts of time and leaving the computer as long as a day.

  In the absence of a recovery disk, I have no idea how to do to return to the form and would like to receive advice or suggest, keeping in mind I'm not a computer genius (if had'nt you may have guessed). Preferably, without losing my element pictures and videos stored on the hard drive, but it's just preference.

  Thank you, Jay

  Hello

  It does not seem good friend if the Windows operating system does not start even using safe mode, then I don t think you will be able to run the operating system without new OS reinstallation. :(

  To back up data from the HARD drive I recommend that you connect the internal HARD drive to external USB HDD controller and a backup of the HARD drive on another computer.

  Then you could try to reinstall the operating system on your laptop using the Toshiba Recovery CD

  See you soon

• I have two monitors and Firefox will not come on the screen.

  When I try to open Firefox it will not load on each screen. Looks like he's trying to go to the secondary screen, but is not visible. The OS is Windows 7 Home first Service Pack 1. Firefox version 37.0.1
  Thanks for your help.
  Jerry

  You get a sticker or other indication on the Windows task bar that there is a window of Firefox "somewhere", but it is not visible anywhere?

  If there is a tile (or a title of the window above the Firefox button in the task bar):

  The Firefox window sometimes opens off screen. If you have a multiple monitor configuration, make sure that both monitors are on. Other users have reported that sometimes Firefox acts strangely while the second monitor is turned off. You mentioned that both monitors are on in your case.

  In all other cases: you can often force the Firefox window is displayed on the screen by double clicking on the thumbnail image just above the taskbar and choose expand. Does it work?

  A possible cause for this is that the file that stores the positions and sizes of window is corrupt.

  #1 method: If you can get a zoomed window:

  Open the settings folder (AKA Firefox profile) current Firefox help

  • button "3-bar" menu > "?" button > troubleshooting information
  • (menu bar) Help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table of the page, click on the view file"" button. This should launch a new window that lists the various files and folders in Windows Explorer.

  Leave this window open, switch back to Firefox and output, either:

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  Pause while Firefox finishing its cleanup, then rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old as well.

  Launch Firefox back up again. Windows normally appear again?

  #2 method: If you can not get a Firefox window for all:

  Close Firefox by right clicking the icon in the taskbar > close all windows.

  Using the Run dialog box (windows key + R) or search from the start menu (bar (or, in Windows 8 may bar charms bar research?) type or paste the following and press ENTER to drill down to the profiles folder):

  %APPDATA%\Mozilla\Firefox\Profiles
  

  Here you can see a folder - in this case, double-click that - or more than one case - in this case, double-click on in what looks like the most recently updated.

  Scroll down and rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old as well.

  Launch Firefox back up again. Windows normally appear again?

• Firefox will not display on the screen even though with Process Explorer, I see active Firefox.exe but no CPU usage

  I use Firefox as default browser v10.0.2 on Dell XPS8300 Intel Core i5 and Windows 7 Ultimate and Compaq Presario CQ57 IO IO Intel Core i3 and Windows 7 Home. More frequently on the (approximately 90% of attempts) that Dell (50% of attempts) Firefox will not display on the screen when I click the icon. Cannot display other programs when it happens. I expressly say display because I believe that Firefox has started. To work around the problem, I installed Process Explorer on both machines and launch this program first, then click on the Firefox icon. When the problem occurs I see process Firefox.exe in the list of processes; some CPU consumed but, then, no CPU activity. If I click on the Firefox icon, yet another process opens in the list of processes, but with the same answer - some consumed CPU and then no CPU activity. If I have 2 processes running and kill the process from the 1st, the 2nd poster and then everything is normal. If I do not open it treat a 2nd, but kill the 1st process then click the Firefox Firefox is displayed and all then is normal. This problem has occurred since the original on the two new machines installation. I have updated the video drivers on both computers.

  OK, let's see if we can solve this problem and make it work for you!

  First of all, if you start Firefox in safe mode (restart your computer first, then when you open Firefox, hold down the SHIFT key) it starts more reliable? This is usually caused by a defective module. If this does not help, then restart Firefox, go to the Firefox, then add-ons button and disable your extensions one by one until you find the troublemaker.

  Also, try to update to Firefox 11, it has several bug fixes that might make life easier here.

  Just as a few troubleshooting steps base to ensure that we have all the bases covered,
  Run all Windows updates, install all required service packs, etc.

  Update all of your plugins (Flash, Java, etc.): http://www.mozilla.org/plugincheck/.

  Download and install MalwareBytes Anti-Malware, run a full scan. http://www.malwarebytes.org/. This check allows that there is no virus on your computer, causing problems. You can uninstall this program after having cleaned the infections.

• How can I remove a "do not disturb" sign for a specific contact? Their messages will not appear on the screen of my phone when it is locked

  How can I remove a "do not disturb" sign for a specific contact? Their messages will not appear on the screen of my phone when it is locked

  kochetova01 wrote:

  How can I remove a "do not disturb" sign for a specific contact? Their messages will not appear on the screen of my phone when it is locked

  Go to the message - details - do not disturb - off

• My 2009 macbook pro will not load.  The technician said that the motherboard must be replaced.  Is there a less expensive repair?

  My 2009 macbook pro will not load.  The technician said that the motherboard must be replaced.  Is there a less expensive repair?

  Apple has set the rates, price around $300 repair program.  I don't think you can get a price of paste elsewhere.  However, there are third-party sites that provide repairs, parts and helpful videos.  Google is your friend.

• My dell optiplex 740 will not start. The screen is black, once it displays the Dell logo. It does not say that the computer is in mode 'sleep'.

  My dell optiplex 740 will not start.  The screen is black, once it displays the Dell logo.  It does not say that the computer is in mode 'sleep'.

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You receive an error message?

  Method 1

  See the articles below and check if it helps.

  Computer stops responding with a black screen when you start Windows XP

  http://support.Microsoft.com/kb/314503

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  http://support.Microsoft.com/kb/318027

  Method 2

  I suggest that you start the computer in the last good known Configuration mode and safe mode, post back with the result.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  How to start your computer by using last good known Windows XP Configuration

  http://support.Microsoft.com/kb/307852

  How to fix a computer that does not start

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

  Method 3

  If the computer can boot in any mode, then I suggest that you perform the clean boot procedure and check if it helps.

  It is possible that some third-party programs installed on the computer is causing the problem.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Repair Windows installation will not continue beyond the mark of 26 min during fill the stage of installation

  Hi there all your PC gurus

  PC fails to complete a repair of Windows XP installation. It does not go beyond the mark of 26 min during the installation phase ends. You can still move the mouse around, however installation is not continue beyond this point.

  The 2 following errors are received:
  Error installing com +.
  "of the subcomponent com + threw an exception during the processing of the OC_complete_installation Setup message.
  d:/xpsp/com/com1x/src/complussetup/Comsetup/csetuputil.cpp (line 3429)
  Error code = 0x8000ffff
  Castastrophic failure
  Cannot run the function ' DllRegisterserverc)' in
  c:/Windows/System32/clbcatq.dll ".

  Corrupted file Unregmp2.exe
  The file or the directory c:/documents and settings by default/user/start menu/programs/windows Media.lnk is damaged and unreadable. Please run the chkdsk utility. »

  PC is a Dell Vostro 1510, it is only a couple of years.

  Can someone please?

  The initial problem was that the PC did not go beyond the page of Windows to start upward. So I had to do an installation of the Dell windows XP disk repair. But I couldn't boot from the CD, (even after changing in the system BIOS boot order) to work around this problem, so I had to disable the boot on the other upward options being - HDD, USB etc. so only if it start from the disc.

  After completing the first part of the repair facility, the PC restarted to complete the second part of the installation, however I got an error message "the Kernel32.dll file is possibly corrupt. The header checksum does not match the checksum calculated.

  After some research, I solved this problem by using the windows recovery console to extract a new copy of the kernel32.dll from the windows XP disc. It seemed to work. The second part of the window repair facility restarted successfully, but now the problem is it will not complete installation, it gets stuck/not will not go beyond the 26 minute mark during the phase of "complete installation."

  It has been full of hiccups. I'm not a person of computer tech at all, but have managed to get so far at this stage.  Can someone please please help, very much appreciated.
  Thanks :)

  Hello

  Follow the steps from the link: you receive the error message "UNREGMP2." EXE - Entry Point not found"when you upgrade or repair Windows XP: http://support.microsoft.com/kb/889288

  You can also try the steps from the link which is very useful for troubleshooting Windows XP startup problems:

  How do I recover from a corrupted registry that prevents http://support.microsoft.com/kb/307545 of Windows XP startup

• (Redirected) Dell audio drivers will not load when the system is turned on for the first time after his stop.

  Dell audio drivers will not load when the system is turned on for the first time after adoption of Windows 10. I have to reboot every time. So what I'm doing puts the system into sleep. in this way, I don't need to stop and restart the system. It is Dell Inspiron N5559. Audio drivers are installed and up-to-date. Equipment works correctly.

  Hi akilesh.sharma18,

  Please repost this in the Audio forum from the laptop to help.

  http://en.community.Dell.com/support-forums/laptop/f/3517

• I recently used a dvd + rw disk to back up my photos. Now when I put a dvd in my pc, why it will not display on the screen that's all there is, or how to give me access to it?

  I recently used a dvd + rw disk to back up my photos. Now when I put a dvd in my pc, why it will not display on the screen that's all there is, or how to give me access to it?

  Depends on what you used for the backup.

  If you used the windows backup or another backup software will contain the entire disk will be a backup file, and view/use this file, you use the same software that allows you to save.

• satellite 4080XCDT will not load the OS W2k

  Hello

  I have a problem with a laptop.
  It runs windows 2000 and will not load the operating system.

  I think someone changed the boot.ini on the pc,
  Now, when it is turned on, it displays the operating system of windows 2000, as well as the other one under it called operating system windows 2000 photo.
  I think someone tried to change the boot image but erred in the boot.ini file and now it won't start him.

  So I think that the boot.ini file is now incorrect and not finding the operating system.
  Is it possible to change this and get the operating system to load?

  If you are sure that only the boot.ini file has been changed then, you can see this Microsoft Web site, and the article on the boot.ini file in Windows 2000.

  Here you can find details how works a boot.ini file and what to change.

  * How to edit the Boot.ini file in Windows 2000 *.
  http://support.Microsoft.com/kb/311578/en-us/

  Good bye