Satellite L500D: WiFi remove connections to the router

Similar Questions

• Satellite L500D - unable to connect to the WLAN router

  Hey all,.

  Hoping that someone here will be more help. For some reason, my laptop won't connect to a wireless network today and it was working fine yesterday.
  When I troubleshoot I get: there might be a problem with the wireless network connection card

  I called belkin and the Lady reset our wireless under a new name which we I = didn t need that my roommate who has vista had no problems with his internet. When I connect the cable through my laptop, I have internet

  Now that I see there no button on my phone to activate the wireless it connected always automatically and the led is on.

  Hi Ren,

  In the wireless issues forum, you can find hundreds of discussions on different WLAN problems.
  Did you check that?
  I think that you will find your answer.

  According to your assignment on resets the router I think that it s properly configured. Check the router security options if the SSID is visible and then encryption and password. Also, make sure that the MAC address filtering is not enabled.

• Satellite L500D - unable to connect to the hotspot free

  I have Satellite L500D and when I connect to the freedom of a hotspot Wi - Fi with no pc security says connected without an internet connection. As PC is brand new, I have ran troubleshoot-made said something on the cards to reset but no result. PC poster networks, connects but won't give internet.
  I see girls download via vUtiliser, but do not download.

  Please help I won't feel stupid if I missed something stupid.

  Hey Buddy,

  Can connect you to your WIFI router at home?

  Usually for these free hotspots you need a key of the owner to access the Internet or the MAC address must be allowed.
  In addition, the correct TCP/IP settings should be used as well.

  I put t know how this works exactly, but if you have problems, you should ask the owner of this hotspot WIFI free. Generally, they can give you more details about this.

• Satellite L300 - wouldn't connect to the router

  I've had this laptop for 2 months, it worked very well to connect to my WiFi router, then one day it would not connect, although I had a signal from my Siemens SE587 router and my Tiscali IP, but I got the message 'there must be a problem with one or more network adapters on this computer.
  I tried the ipconfig/renew command and received the message that no operation can be performed on the wireless network connection, although it has its media disconnected, the same message to connect to the Local network.

  If I connect my LAN cable in the computer laptop all work ok, but not the wirelss.
  Any ideas please.

  Hello!

  Maybe a silly question but that you have activated the card WLAN? You can do it with FN + F8 and switch on the laptop hardware.
  Check it!

  In addition, it would be interesting to know what operating system you have. You may need to disable management feature in Vista the WLAN power supply management.

  Good bye

• Satellite L350 - is not connect to the router

  I had a problem with the radio on my Satellite L350. Even if the router is right next to the computer, it is not for her. It can see if I do a search but only says: connection not available. I have 2 other computers works great on the router. The router is a Netgear.

  Any body can help?

  Hello

  What should I say now? First attempt to update the WLAN driver that you find on the Toshiba WLAN Portal:
  http://APS2.toshiba-tro.de/WLAN/

  Also, check the TCP/IP settings of the wireless network card. If your router supports DHCP, check if this option is enabled. Also make sure that the DHCP client and DNS work properly.

  You use a firewall? If so try turning it off. Maybe it s blocking of the Internet connection.

  By the way: what OS do you have?

• Satellite A300D - unable to connect to the router

  I can't connect to my wireless modem that works correctly for other laptops at home.

  I bought this phone 2 weeks ago and when I discovered that it can not connect, I took it to the shop, I bought it. Here, surprisingly it connected to wireless internet so they told me that there must be sth wrong with my modem. I reinstalled my modem but still not good. I can connect with other laptops that have vista as well.

  I can view the connections. Sometimes, he tells me that the password is wrong that I'm sure I get right! I even tried to completely disable password security, then it seemed like it was connected, but I could not access Web sites, including google.com. Sometimes it is said that id verification timeout. I reinstalled the wireless driver that did not work. He has no problem with the connection to the local network. I almost tried everything but still can't connect.

  Help, please!

  Hello

  Why you try to reinstall the modem driver if you have a problem with your wireless network card?

  Anyway, if you can plug it into the router in the shop everything should set up and installed correctly on your laptop and the reason must be the router.

  So in your case, I would try to update the firmware on your router.
  If you use DHCP, try static IP addresses. Try to also disable filtering of MAC addresses and try another encryption, e. g. WPA2.

• WiFi is connected to the router, but "no internet access?

  Hi I have a Samsung r519 laptop with windows 7. I am connected to my routerbut I can not always connect to the internet. I think that the problem can be on an ip address, dns or parameter setting of the server. My ipv4 settins are set to 'use ip address of followig' and 'use the followig dns servers. My ipv6 settings are set to automatic. I would like to know if you want pictures of my computer screen. Help, please.

  Hello

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  Did you do any hardware or software changes to your computer recently?

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the network troubleshooter
  Reference:
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  If this does not help, then use method 2.

  Method 2:
  For the DNS server, follow these steps.

  a. Click Start. Type cmd in the search box and press ENTER.

  b. in the command prompt window, type the following command and press ENTER:

  ipconfig/flushdns

  Note: There is a space between ipconfig and /.

  It will show you the message successfully empty the cache of DNS resolution.

  c. again once, in the command prompt window, type the following command and press ENTER.

  ipconfig/registerdns

  d. type the following command at the command prompt and press ENTER.

  ipconfig/all

  The command ipconfig/all command displays for all your network adapters, TCP/IP in Windows settings.

  If your IP address of your Local network connection is 0.0.0.0 or 169.x.x.x (where x is a number any), then your computer does not receive an IP address from router.

  If this is the case, try this:

  a. type ipconfig enough at the command prompt and press ENTER.

  b. then, type ipconfig / renew in command prompt and press ENTER.

  The test again by typing ipconfig/all to see what is the address?  (If you are on a router, it should start by or 192.168.0.x or 192.168.1.x 10.x.x.x)

  Then, if the problem persists, use method 3.

  Method 3:
  Please use the suggestions contained in this Microsoft support article and check the issue.
  Reference:
  How to reset TCP/IP using the NetShell utility
  http://support.Microsoft.com/kb/299357

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Re: Satellite L770 - unable to connect to the WiFi N project

  I can connect when I set my router "mixed b/g/n" but only 54 Mbps but if I change the router 'one n' while I can find the network but cannot connect. My most old laptop, Satellite L500D can connect mode "n" without any problem. These are the only devices connected wirelessly and the problem persists if old pc is turned off. In the interface of the routers, I see my connection has / g, older Satellite mode shows n mode as it should.

  Drivers are updated, router D - link DIR - 615 with the latest firmware.

  Hi JP75,.

  What exactly happens if you try to connect to the router N project? You get an error message or what happens?

  It is not easy to say why the works of N doesn't correctly project but first of all, I would try a driver WLAN official Portal of Toshiba:
  http://APS2.toshiba-tro.de/WLAN/

  Is it in eco mode / normal too?

• WIFI connects to the router but no internet connection on 15R 3521

  Hi, the new laptop 3521 with Win7 Pro the WLAN will connect to the selected wireless router but is unable to establish an internet connection.

  WLan Driver 1703 was duly installed once the Chipset driver was installed, as recommended.

  Fortunately, other mobile devices to connect to the same router. Ubuntu on this laptop was also happy to connect to internet on WIFI, only Win7 fails.

  Disabled the Win7 firewall, but no change. This connection, unidentified in the network and sharing Center.   Router SSID etc have been entered correctly. Remove the WLAN profile and not reinstated, no change.

  Tried to connect to another router wireless with the same result. I can only run this laptop on wired connection to the router.

  I am at a loss as to what other steps I could take to correct this key WLan / internet access.

  Any suggestions would be welcome. See you soon.

  Hi love,

  Thanks for your advice. I deleted the profiles (two identical found!), also removed all entries of all WiFi routers in Win 7 registry. This step has not resolved the problem.

  However, I found the reason for the connection problem and the solution is the following:

  In the wireless connected (TP-Link) router, wireless--> channel settings is set to 'AUTO' (which is to select automatically 20 MHz or 40 MHz).

  In the device driver Dell WLAN 1703 (properties--> advanced--> bandwidth 802.11 n, the value has been set on (ie the Atheros is the default!))  "20 MHz.

  Once I put the option value "20 MHz / 40 MHz Auto", the connection comes to life.

  What a relief!

  The question is now completely resolved. Thank you to all who have contributed.

  Better with respect to Dzsino.

• Unable to connect to the router WLan - Satellite L300D

  Please help me so that I have still a few hairs left!

  I installed WLAN driver on my laptop Satellite L300D with Vista Home installed.

  I see my network in the available connections, but when I go to connect, it will not connect.

  My other two desktop computers can connect to the router without a problem.

  Any suggestions?

  Thank you
  Neil

  Hello

  I think that you didn t try updates. Right?
  Therefore, my first recommendation would be an update of the BIOS and driver WLan.

  Check the current version of the BIOS that is available on your laptop. If the latest version has been released then update the BIOS.
  In addition, to download the latest WLan driver from the Toshiba WLan portal and to update:
  http://APS2.toshiba-tro.de/WLAN/

  On this Wlan site, you will find three different WLan drivers for three types of WLan cards. First check your wireless network card, and then use the right driver!

  See you soon

• my wifi stopped working suddenly. It shows no available networks. However, another iphone is able to connect to the router. Help, please

  my wifi stopped working suddenly. It shows no available networks. However, another iphone is able to connect to the router. Help, please

  Hello

  1 have you made changes to your computer recently?

  2 are you able to access the Internet through an Ethernet cable?

  I suggest you to follow the steps in the link and check if it helps.

  Windows wireless and wired network connection problems

  I hope this helps.

• 9.3.4 disabled wifi on an Ipad, but it connects to the router. Just don't download at all

  IPad was working fine, but I've updated to 9.3.4. Now Wireless does not work. Shows connected to the router, but nothing happens, but say unable to connect to the server, error trying to access the internet or by mail. Also turn continuous flashing VPN gray to green, then again, but we have never set up a virtual private network. Don't know if it is connected. Have you tried

  1 disconnection / reconnection to 2 routers that work very well for other devices

  2 reset wireless via settings > general > reset > reset network settings and then hang up again

  3 airplane mode on, wait a few minutes, then shut off again

  Overall, the router will connect to any time, we put the password, but there is no transfer of data. 3 other devices work fine with the router. Don't know where to go from here, or if it is possible to back out from the upgrade. Anyone else having this problem? A research increase the same problem.

  Thank you

  Anything that causes the problem is not specifically 9.3.4, which fixes just a security breach. Have you tried to restart routers?

• Satellite A500 - unable to connect to the WLan

  I'd like someone to help me.

  Have recently bought a satellite A500.
  I'm new in the world of laptops so I'm wrong.
  I connected to a router via a modem, the two netgear, the news.

  Had the two config for my network. Works well as long as ethernet is connected to the router of computer.

  My wireless icon on the front of the laptop is orange.
  If this should be green as the router?

  Pressing FN f8 it tell me wireless is connected.
  When I remove the ethernet cable it tell me to fix the problem, I need to plug in the ethernet cable.
  But I want to go wireless, I'm sure I'm missing something.

  Rang netgear but after that my router and it is not connected to wireless technology they could help me more.
  I use windows7.

  Thanks to anyone who can help me.

  > My wireless icon on the front of the laptop is orange.
  > Should it be green as the router?

  The WLan led can only be ON or OFF. If the light comes on (any color) then it means that the Wlan switch is on!

  It seems that the WiFi is enabled. In this case, you will need to properly configure the WiFi network.
  You can use the own WLan settings in Windows or a Wlan configuration tool like Intel ProSet utility.

  First need choose the right SSID (wireless network name), right of encryption (WEP, WPA, etc.) and password encryption.
  Please note that all of these parameters should be the same on the router WLan and WLan configuration software!

  Please check if the firewall does not affect the connection to the internet as well!

  PS: make sure you use the latest version of the WLan driver
  Here you can find the drivers:
  http://APS2.toshiba-tro.de/WLAN/

  In addition, search and read comments here on the forum!

• iMac connects to the router of Linkysys WRT1900ac

  I am trying to help a friend get his iMac 12.1, that is running 10.11.4, to connect to a new Linksys WRT1900ac router.  The router is a novelty in this House, is in the same room of 10 x 12, as the computers listed below, and the installer was using the Linksys recommends the method, which is to let the Linksys to make adjustments.

  Here are its configuration;

  The router is connected to a cable modem, ISP and the following devices are connected to the router and works well;

  Via ethernet

  Windows 10 PC

  AT & T cell phone extender

  Ooma VOIP

  Wireless

  iPhone

  iPad

  Notebook PC

  While troubleshooting my MacBook 5.1 also allows to connect without problems to the Linksys router.

  Note that her iMac connects without problem to the wifi network Netgear Guest unprotected from its neighbor.  I also installed in his room my 1st generation Airport Express, which has added a second wifi network but without access to the internet and his iMac connect without problems to this wifi.

  Here are the steps I took to try to solve this problem, and they were unsuccessful;

  ➔ Scanned for malware/adware with Malwarebytes and found nothing.

  ➔ Ransacked after the files in/Library/Preferences/SystemConfiguration and restarted

  com Apple.Airport.Preferences.plist
  NetworkInterfaces.plist
  Preferences.plist

  ➔ When the previous did not work I trashed all the files in the folder/Library/Preferences/SystemConfiguration except "com.apple.boot.plist', which would not remove and rebooted

  ➔ Created a second user account and still not able to connect to the Linksys router

  ➔ Repaired permissions

  ➔ Created a new location in System Preferences > network and added the OpenDNS addresses and in the material value MTU 1453

  ➔ restarted in safe mode and not still could not connect

  Firmware on the router Checked ➔, which is updated

  ➔ Reset SMC

  ➔ reinstalled El Capitan via the App Store

  That's all I could think about.  I'm puzzled.

  I checked the router and everything seems ok, but I'm no expert.  There may be something I'm not contagious.  I have seen that he has no MAC filtering set up in the router, so this isn't everything.

  Please tell me if there is something that I'm on.  Is there something in the router, that I need to change?  There are other files in the Mac, I need to delete?  Is there any other troubleshooting steps I can take to identify this problem.

  Any help would be appreciated as it is a total mystery to me.

  There are a lot of variables, but start with some basic info. So on her iMac, if you click the wifi at the top right, you can see his router listed?

• Laptop HP G70 connection to the router but not the internet

  I have a laptop HP G70 running windows 7, I got a new router installed. My computer to the router, but not to the internet links. I tried the software updates for my drivers running, doing all used to end router for example change etc channel/parameters/IP wifi. I tried to turn off the wireless, reset the router and re enabling it does not work.

  It will connect to the internet ethernet of nis.

  My laptop connects fine with other networks if it is not wireless.

  All other devices are connected to the router.

  Please help this is extremely frustrating.

  You are the very welcome.

  I compressed the file and downloaded on my Skydrive account, which I shared the link below.

  Download, unzip and run the file called sp54972.

  https://onedrive.live.com/redir?RESID=832F4957D2E51B93! 263 & authkey =! AEOhdjA3QVhETy0 & ithint = % 2czip