Satellite L505D factory restore recovery manually Partition files

Here's my Situation:

I have a Toshiba Satellite L505D-s5695 laptop, and I had to put a new hard drive in it, but not before I have copied files on an external drive recovery partition.

So I have no recovery disks and no original hard drive.
For this reason, now '0' in starting or F8 options to restore or enter recovery toshiba utility no longer exist.

Is it possible to use Imagex or some other utility to restore the laptop to the original image with the files that were originally paritiion of recovery?

I am currently playing with imagex controls and the. Files of stormwater management,
But if someone knows the command line exact usage or procedure, it would be a great help!

Thank you!
-Tom

Below, I have the files I got on another drive that appeared originally on the recovery partition:

C:.
? ! V4_03_11.VRP
? DATA. INI
? DMI. INI
? EDITAF. BAT
? PLANDATA. INI
?
???? BIN
? ! V1_05.VBR
? ! V1_22.VRR
? ! V1_24.VRC
? BOOTPRIORITY. EXE
? BOOT_32.EXE
? CHECKMAXPTSIZE. EXE
? CENTRAL PROCESSING UNIT. CMD
? CREATEPARTITION. EXE
? CTRLDRVINFO. EXE
? DISKWIPE. EXE
? DMI. EXE
? EBLIB. DLL
? ERRORDIALOG VALUE. EXE
? EW3BOOTSEQ. EXE
? GATHER. EXE
? GETHDDINFO. EXE
? GETKEYSTATE. EXE
? GETMODEL32. EXE
? INIFILE. EXE
? INITRECAREA. EXE
? KRAIDAPI. DLL
? KRAIDAPI. INI
? KRAPIV3. DLL
? KRAPIV3. INI
? KRC. EXE
? KRC3. EXE
? LOADPEDRV. EXE
? MEDIAEJECT. EXE
? Message. INI
? Module.log
? OBJCMOS. DLL
? OBJPCI. DLL
? OBJTDEIO. DLL
? PEDRV. SYS
? RAIDMODECHECK. EXE
? RAIDSETV2. INI
? RAIDSETV3. INI
? RECOVERY. BAT
? RECOVERYMENU. EXE
? RESETSECTOR1. EXE
? SCISET32T. EXE
? SETPARTFROMMENU. EXE
? SETPARTFROMPLAN. EXE
? TAI * CONCLUDE. INI
? TBIOSDRV. SYS
? TDEIO. SYS
? TOSCONTROL. INI
? TOSDIALOG. EXE
? TOSIMAGEX. EXE
? TOSRECOVERY. EXE
? TOSSECERASE. DLL
? TOSSSDFUNC. DLL
? TOSSSDFUNC. EXE
? TPWSAV. SYS
? TURNOFFPC. VBS
? WBOOTSEQ. DLL
? WBOOTSEQ. EXE
? WIMGAPI. DLL
? WIPECAUTION. EXE
? WRITEMBR. EXE
? WRTC. EXE
?
???? PLANFOLDER
? ???? TI100760V00
? TI100760V00. INI
?
???? SOURCES
? BOOT. WIM
?
|??? ZZIMAGES
???? ZZIMAGES
EXCLUDE. INI
PREINST. CRC
PREINST. STORMWATER MANAGEMENT
PREINST10. STORMWATER MANAGEMENT
PREINST11. STORMWATER MANAGEMENT
PREINST12. STORMWATER MANAGEMENT
PREINST13. STORMWATER MANAGEMENT
PREINST14. STORMWATER MANAGEMENT
PREINST15. STORMWATER MANAGEMENT
PREINST2. STORMWATER MANAGEMENT
PREINST3. STORMWATER MANAGEMENT
PREINST4. STORMWATER MANAGEMENT
PREINST5. STORMWATER MANAGEMENT
PREINST6. STORMWATER MANAGEMENT
PREINST7. STORMWATER MANAGEMENT
PREINST8. STORMWATER MANAGEMENT
PREINST9. STORMWATER MANAGEMENT

Post edited by: dersmudo

> I have a Toshiba Satellite L505D-s5695 laptop, and I had to put a new hard drive in it, but not before I have copied files on an external drive recovery partition.
After reading this, I must say that this will not work. You can't simply copy these recovery filed on another installation of HARD drive recovery and start. It will not work.
Either you can start installation of recovery following procedure of Toshiba how to start HARD drive recovery facility or you must create recovery DVDs and use it for the installation of the OS.

This recovery DVDs can be used on each HARD drive. With other words, you can replace the HARD drive with new and use the recovery image installation DVD.

Following your logic, each can simply copy files and use it on some laptops. It will not work.
You have created a DVD Toshiba tips/description on the creation of following recovery from recovery discs?

Tags: Toshiba

Similar Questions

Satellite P200D Factory defaults recovery

Hello

I post here in the name of an old man who bought a Satellite P200D-PSPBQE, S/N 28160997 K (Vista Home Premium French) who has gone through a series of problems. He cannot attend his book himself and so asked me to fix it.

The laptop has especially worked for two or three years until this summer when it has overheated (as I can judge by touching the case) and switched automatically a few times off the coast. At one point the laptop wouldn't even step to the BIOS.

Here is a rough summary of what I did then:

I began to open the case, but it seems too difficult, so I closed it back and use a vacuum cleaner to clean the dust in the vents, restarted the laptop and it are returned and very well for a while. At one point, the owner of the laptop mentioned a small bug crept once out of the laptop but I don't mind at this moment.

After some time, Vista has experienced various gels (maybe explore buggy but I couldn't judge I never looked in the event viewer that I had no idea what kind of help the EV could bring until very recently). I thought that this could be due to the many automatic switchoffs who listens to the Vista system files. I ran sfc/scannow, who pointed out a few errors, but cannot fix them. Yet it is not attached to the gel. I stuff ready for the usual save the data/reinstall vista and drivers/restore cycle data.

On the recovery discs: I asked the owner for all Toshiba drives, but it didn't, not even the recovery disk based 100MB.

I thought that automatic recovery of factory default partition existed but that he could not find its start-up in the manuals coming with the laptop. I was curious and thought, Hey, I'll start the recovery partition myself with a boot partition tool. I ran the Partition Magic CD reported contradictory of the partitions on the first drive, which prompted me to repair it with suggested partition table values: I stupidly pressed Yes and then not really started (or so I think). I couldn't see any recovery partition only two 80 GB system partitions, and data were present. A race of Ranish Partition confirmed it.

Yet, I tried to turn on the laptop while pressing '0' at the same time, as stated in some tech forums but it didn't not start any recovery procedure at all.

I could not find the recovery disk creator in the menu program so I downloaded and it started and it reported, no partition recovery not found.

As I found myself helpless without any recovery solution (I had not heard backupmedia.toshiba.eu) I downloaded a copy of Vista of P2P (Yes, it's bad, but I was impotent). This laptop has two hard drives of 160 GB, of which the second was not used. I exchanged the places of two readers, installed Vista using the product key from COA to empty disk. I installed the display driver and the retrospective data is restored and the laptop is back on the spot two, running OK, but still from time to time of freezing.

Finally, I decided to call the assistance of Toshiba in France who reported to me on the backupmedia.toshiba.eu site where I can order recovery disks.

_Before I order backup disks I have a few questions: _

Can I open the case and do a thorough cleaning of any dust remaining/bugs/etc? (I guess that the answer is Yes) Are there instructions for that?

Maybe hit the cpu overheating. Should I run a test of cpu and which?

Overheating may have affected the memory modules. Running Windows Memory Test enough or do I run Memtest 3.x or later version to check the memory sticks?

Is there really a recovery partition on the hard drive of this series (P200D-PSPBQE) system? If Yes and given the Partition Magic probably changed only the partition table, is there a way to restore the original partition table values and thus to restore access to the recovery partition? That would save me the trouble to order backup discs.

backupmedia. Toshiba.EU offers you to order a backup for 35 euros drive about it's a drive to restore default factory containing Vista, drivers and tools, or just the basic restore disk that starts (currently absent) recovery partition? In the second case, how to restore the laptop to original factory settings?

Thank you for reading this far, sorry for any English mistakes and thanks in advance for any input,
Eric Ivanov,
Grenoble, France

> Should I open the suitcase and do a thorough cleaning of any dust remaining/bugs/etc? (I guess that the answer is Yes) Are there instructions for that?

I wouldn't recommend disassemble the laptop. This should be done by a mobile technician who knows what to do if you want to remove dust or debris from cooling vents, I would recommend using a jet of compressed air and you may suck dust.

> Overheating may have touched the cpu. Should I run a test of cpu and which?
Perhaps this is possible, given that the laptop is two years (or more) and during this time, a lot of dust might collect inside the cooling modules.

> Overheating may have affected the memory modules. Running Windows Memory Test enough or do I run Memtest 3.x or later version to check the memory sticks?
A higher temperature can affect all parts of the laptop also memory, it was the case in my old notebook. BSOD was always because the memory could not be cooled. But I doubt that memtest would help you if the higher temperature would affect modules

> Is there really a recovery partition on the hard drive of this series (P200D-PSPBQE) system? If Yes and given the Partition Magic probably changed only the partition table, is there a way to restore the original partition table values and thus to restore access to the recovery partition? That would save me the trouble to order backup discs.
You cannot restore the HARD drive recovery partition. If you are not able to start the HARD drive recovery (pressing F8-> fix my computer-> HD recovery), you must order the disk from Toshiba Web page.

> backupmedia.toshiba.eu offers you to order a backup for 35 euros drive about it's a drive to restore default factory containing Vista, drivers and tools, or just the basic restore disk that starts (currently absent) recovery partition? In the second case, how to restore the laptop to original factory settings?
This s recovery disc that contains the image of Toshiba. Toshiba is a package that contains the Windows operating system (Vista), drivers, tools and additional software. Simply said; This disc would fix the laptop back to factory settings.

Hope this might help a little.

Satellite A660 Factory Restore problems

I have a Satellite A660 Ref. PSAW3A-14V062 delivered pre-installed with Win 7 not provided, but a hidden partition with disk recovery files.

Decided to do a restore to factory from scratch but ends of disk errors. Removed the HD and connected to another computer.

Using Acronis Disk Director, I copied the hidden partition (HDDRECOVERY) to another drive and then formatted the drive and copied the partition hidden in it and reinstalled to the laptop.
Downloaded an ISO image and tried to install it from DVD but received the message that windows cannot be installed on the HARD disk that the drive is about to fail.

Bought new HARD drive and copied the partition hidden for her.
I then tried to install from the DVD, but kept getting errors about unable to find files, after ISO more several downloads and burn 5 different DVD the furthest I got was the screen where it is "files", this remains at 0% and nothing else.

I then tried a factory restore using the "hold 0 during startup", but when I took out the key pressed 0 when the Toshiba start screen showed that nothing happened.

There was a small Partition 'System' on the original HARD drive I have has not copied. I have a few questions.

(1) the "System" partition did not the files needed to start the factory restore and if so is there anywhere I can download these files?

(2) probably a topic for another thread, but no clue as to why I have so many problems with ISO files.

Cheers and sorry for the long-winded explanation.

The installation of any recovery is quite complicated. It is designed to avoid a kind of manipulation so original recovery image can be installed either using recovery DVDs or HARD disk recovery facility which must be created with Toshiba recovery disc creator tool.

To be honest, the whole story is complicated enough, but what confuses me, is
> Decided to do a restore to factory from scratch but ends of disk errors
If I understand you right, you have created a drive recovery, right? What exactly happens?
You can use this drive with new HARD drive?

This method with files recovery to cope with the new HARD drive does not work. You will not be able to access and begin HARD recovery disk image installation.

If you have a new HDD only how to install the original Toshiba recovery image is to use the recovery DVD disc.

For Satellite C660 factory restore

I installed windows 7 pro on my laptop which made my longer laptop for start and stop time down and little slow. now I just want to go back to the factory restore, how can I do this. the pre-installed recovery partition is not show in "my computer".

Thank you very much

You cannot start after installation of operating system HARD drive recovery clean facility more.
You can do this via recovery DVD only.

Did you create this disc by following the advice of Toshibas rappelling recovery or document s user manual?

If you have this drive please use it for recovery image installation. If you n t have it you have a big problem today.

Satellite L505D-S5983 - error Recovery DVD

I created the recovery DVD (Satellite L505D-S5983) discs and creating disk 1 the following message appears:

"Cannot play the next file. "D:/ZZImages/ZZImages/PREINSTZSWM (Error code: 020150-20-00000000).
I tried twice and got the same error again. Has created the dvd 2 of 3 and 3-3 with success.

Any idea?

Thank you

Until we start the discussion please can you me which media empty that you use (DVD - R, DVD + R,...)?

Satellite A500 - factory restore

Hiya

I was wondering if someone can help me.

I had no end of problems with my laptop with one thing and another, and for these last months, I had a problem with my windows install. I can not install, download or update anything because it says that there is an error with the installation program. I tried various things to try and fix this, but think that the only thing for me to do now is to do a factory restore.

The problem is its asking me a password that I don't have. Is there a way to get around this?

Thank you very much

PS - or maybe someone can suggest a way to fix the installer: o)

If you use the Windows login password, use the same. If not, put your account without password name and click Next.

Inspiron One 2320 - factory restore / recovery outcome

Hello

I bought the Inspiron One last year which has Windows 7 Professional pre-installed on it.

In my infinite wisdom, I decided to make a room upgrade to Windows 8.

My wife don't like Windows 8 and want to return to Windows 7 Pro.

The problem rears its ugly head when I go in the troubleshooting section > Advanced Options > System Image recovery

I get the report that there is system image.

Windows 8 wiped my hard drive factory backup image?

I'm counting on you my fellow COMPUTER geeks for the answer!

Help

Andrew

Hi André,.

I understand that Windows 8 is a relatively new OS and might take a while to become familiar with. However, if you encounter problems using Windows 8, you can refer to the Windows 8 here for general support 'how to' articles of use page.

As you have upgraded to Windows 8, the recovery partition has been lost and you would not be able to go back to Windows 7 via the Image recovery. However, if you have created a recovery media factory at the time of the system configuration, you may be able to restore the system to factory settings using this media.

If you have not created a recovery media, the only way to get back to Windows 7 is to re - install the operating system using reinstallation disks.

Answer please if you have any other questions.

Satellite L505D-S5965 and recovery disk Creater

I did a clean install of windows 7 when I updated and no longer have the Toshiba recovery disc creator.
I can always start disk recovery tool HARD I did not delete this partition when I upgraded. I would like to be able to create a recovery for my system disk in case something happened to my hard drive.

Where can I download it Toshiba Recovery disk creator tool? Is there another way for me to get a recovery disk?

Stand by.
I think with your answers you're going in the wrong direction.
Good question, but you asked very Timox offered no exact answer.

Please do not mix two very important but completely different things:
# New laptops computers are delivered without recovery DVD and the DVD of the facilities must be created by the owner of the laptop. For this application, Toshiba has installed small tool called 'Toshiba Recovery Disc Creator'. This tool can be used for creating discs of facilities only.
# I don't know not what you understand under HARD drive recovery tool but the fact is that recovery image is recorded on the second partition and can be used for the installation of HARD drive recovery. This can be done if you plant only settings. After the clean operating system installation, you probably won't be able to start the installation of the HARD disk even if the recovery files are always saved on the second partition.

As I see you have American portable model. I don't know exactly how it works there but the principle must be the same as here in Europe.

At startup, you must press F8 or zero to enter advanced startup options. There you should find option repair my computer and next to this option, you enter the with recovery option Toshiba system recovery options.
When you install the clean operating system, this option will be gone. I describe how it works now on the European models, but I think we model it should be similar.

Once again the important questions:
Have you ever tried to start installation of HARD drive recovery (F8 or 0 at startup)?
Can you he start now after installing Win7? If this isn't the case, you have a problem. I just hope that you created the recovery DVDs when you got your laptop.

How to restore Satellite L505D-S5965 to factory settings

Hello Toshiba community

I have a model of Satellite L505D-S5965 and apparently, more the sumer, I don't have an anti-virus. All members of my family had used this computer and now it seems to me that he is infected with a large number of viruses. For example, now that I have renewed my McAfee subscription, my computer does not have McAfee. I double click on it and I just get the pop-up window of McAfee and it appears only in white. Also, when I try to run programs of browser such as Google Chrome and Mozilla Firefox, two of them don't open even.

I wanted to ask you is, how can I restore my Satellite L505D-S5965 to its factory settings? I know you might need a recovery disk, but y at - it another way?

You can try to do this by using the HDD recovery procedure > http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

Re: Cannot use the recovery on Satellite L505D partition

Hello.

I am trying to help a friend with their Satellite L505D who had a serious virus problem. I wasn't able to run/install programs with the virus on it. I used a Microsoft tool to remove the rootkit trojan, but I always had problems with viruses. I also lost most of the programs on the computer. All folders were empty (except for some games), so I could not access all of the tools in this way. I could not the machine to load any Toshiba restore utility by pressing zero everything with power. I saw some recovery using F8 during the startup options and had a link to restore the original setting of Toshiba, but clicking that choice has done nothing else a break for a few seconds. I waited several minutes, clicked on it again, rebooted and tried. Nothing. As a side note, once all the while, the recovery partition was visible from explorer.exe. Not before or since.

So I reformatted the computer with a 64-bit Win7 Home Premium Upgrade disk (the partition of restoration by leaving intact) and then enter the key for the system. Supprise, supprise, it asks me to activate within 3 days.

My basic question is, can I access this partition recovery in a different way to use it? IE copy its contents, or start on some comand prompt to log e:?

Thanks in advance for your suggestions.

Hello

To be clear: there is only one way to use the saved on the HARD drive recovery image and install it.
Exact description step by step how you can read on http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm

If this does not work, only way to do it anyway is to use the recovery DVDs. It is: has your friend created these disks?

Satellite L505D-GS6000 cannot read files on recovery CD

Hello

Ive been trying to reset my Toshiba SATELLITE L505D-GS6000 and I get to the wizzard of recovery and he said: copying files.

After about a half hour it it comes up with an error message saying: he can't read the files on the Cd.
Is there another way to restore? or I have to pay for the new recovery cd?

Hello

Perhaps the disc is scratched or the CD/DVD drive laser lens is dirty.
Try to clean the lens of alcohol or cotton tip.

If this is not enough, try to copy the recovery to another disk disc using other computers.
Then try to restore the Toshiba laptop using the new disk created.

If this is not enough, order a new disc.
For Toshiba notebooks US, check this:
https://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/serviceUnitVerification.jsp?orderType=SFF

On Satellite A105 - S2131 factory restore

I have a series of Toshiba Satellite A105 - S2131. I'm in the need to do a factory restore, but I don't have a restore disc, because I never saw when I got the computer, and when I tried to create a floppy disk to the computer that it does, I get an error that says in cannot find the file to create the disc. Now I don't know what I can do to make the factory restore.

Any help would be great.

Thank you

Hello

For me, there is a clear situation you need to order the new recovery media by the nearest authorized service provider.
But you have another way to get own laptop preinstalled, use CD original Microsoft facilities. All the drivers, tools and utilities, you can find and download from Toshiba support site.

Satellite L350D-213 - restoration of the factory without disks

Hello

I came to this page because the Web, so many people say you don't need a disk and many others say that you do! {Massive headaches} CONFUSED!

After last week, ending up with the UKASH virus on my computer, a friend helped and explains to go into MSCONFIG in safe mode and disable all, then I could finally get into my normal settings and do a scan to wipe it. I ran ad-aware, but later removed that he had fallen behind EVERYTHING, including IE. Then, I saved all my stuff and deleted from my computer to make room. I then did some general research and followed the instructions. "speed up my performance" followed by a few scans/clean ups and Defrags.

I don't remember what I did to remove panic and difficulty Ukash and performance thereafter, except that I know that some applications do not work, because of a name of a file I know I deleted as 'my speed' and some I do not know why they do not work.

After spending TWO WEEKS on this issue, it is better, the UKASH went, my performance is faster BUT the strange problem of a file, and I'm done with him! I want to do a factory restore to put all rights that I can and have done wrong.

My question is; Can I do a record of WITHOUT restore factory, I don't remember if I've ever had a recovery disk, but if I did, I don't have any him more as they have become lost or misplaced.

What are my options?

My biggest fear is I'm at half way through the restoration of the factory and it prompts for a disk and I don't have. I also drive HARD recovery on my laptop on drives C and D.

(System Restore does not work for me either, I have no restore points or can I create one, so another reason why I need to do a restore of the fctory)

Kind regards.

In your situation you should not spend a lot of time speculating on what the people are saying. In the user s manuals document described clearly how it works with the recovery image installation, creating recovery image and what your options are.

In my opinion the best solution for virus affected system is new and clean install of the OS. It's certainly more radical solution but, I think of easier and faster way to have own OS again. The first step is the backup of the data, if possible and recovery image installation (factory settings).

Recovery image can be installed on two ways:
1 as described on http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm HARD drive recovery facility
2 with recovery disk created recovery image installation

I presume you didn't create this disk so that you can do now is to order on https://backupmedia.toshiba.eu/landing.aspx

In any case, try it please with option 1 and send feedback.

lost control file and datafile addeed restore/recovery without loss of data

Here, I tried the following

created a new table called t2 and made sure the data went to a specific tablespace...
has taken a level 0 backup
remove the control file
couple of datafile to above tablespace was added and then insert more data
then went out to restore the database... but datafile and control file always could not be open? What is wrong here...

SQL> @datafile
-- list of datafile

Tablespace File Typ Tablespac File Stat    Used MB    Free MB    FILE_MB    MAXMB Datafile_name                     FILE_ID AUT
---------- -------- --------- --------- ---------- ---------- ---------- -------- ------------------------------ ---------- ---
UNDOTBS1   Datafile ONLINE    AVAILABLE         16         84        100    1,024 /data/trgt/undotbs01.dbf                3 YES
USERS      Datafile ONLINE    AVAILABLE       1153        895       2048    3,072 /data3/trgt/user02.dbf                  5 YES
CNT_TST    Datafile ONLINE    AVAILABLE          1          9         10        0 /data3/trgt/cnt_tst01.dbf               7 NO
SYSAUX     Datafile ONLINE    AVAILABLE        626         35        660   32,768 /data/trgt/sysaux01.dbf                 2 YES
USERS      Datafile ONLINE    AVAILABLE       2031         17       2048    2,048 /data3/trgt/move/users01.dbf            4 YES
SYSTEM     Datafile ONLINE    AVAILABLE        712         58        770   32,768 /data/trgt/system01.dbf                 1 YES
USERS      Datafile ONLINE    AVAILABLE         65         35        100   32,768 /data3/trgt/users03.dbf                 6 YES

7 rows selected.
-- new table is created called t2 and its going into TS called cnt_tst
SQL> CREATE TABLE TEST.T2
(
  C1  DATE,
  C2  NUMBER,
  C3  NUMBER,
  C4  VARCHAR2(300 BYTE)
)
TABLESPACE cnt_tst;  2    3    4    5    6    7    8

Table created.
-- data inserted
SQL> INSERT INTO
  test.T2
SELECT
  *
FROM
  (SELECT
    SYSDATE,
    ROWNUM C2,
    DECODE(MOD(ROWNUM,100),99,99,1) C3,
    RPAD('A',300,'A') C4
  FROM
    DUAL
  CONNECT BY
    LEVEL <= 10000)
;   2    3    4    5    6    7    8    9   10   11   12   13   14   15

10000 rows created.

SQL> commit;

Commit complete.
-- to check of cnt_tst has any free space or not, as we can see its full
SQL> @datafile

Tablespace File Typ Tablespac File Stat    Used MB    Free MB    FILE_MB    MAXMB Datafile_name                     FILE_ID AUT
---------- -------- --------- --------- ---------- ---------- ---------- -------- ------------------------------ ---------- ---
UNDOTBS1   Datafile ONLINE    AVAILABLE         16         84        100    1,024 /data/trgt/undotbs01.dbf                3 YES
USERS      Datafile ONLINE    AVAILABLE       1153        895       2048    3,072 /data3/trgt/user02.dbf                  5 YES
SYSAUX     Datafile ONLINE    AVAILABLE        626         35        660   32,768 /data/trgt/sysaux01.dbf                 2 YES
USERS      Datafile ONLINE    AVAILABLE       2031         17       2048    2,048 /data3/trgt/move/users01.dbf            4 YES
SYSTEM     Datafile ONLINE    AVAILABLE        712         58        770   32,768 /data/trgt/system01.dbf                 1 YES
USERS      Datafile ONLINE    AVAILABLE         65         35        100   32,768 /data3/trgt/users03.dbf                 6 YES
CNT_TST    Datafile ONLINE    AVAILABLE         10          0         10        0 /data3/trgt/cnt_tst01.dbf               7 NO

7 rows selected.

SQL> select count(*) from test.t2;

  COUNT(*)
----------
     10000

1 row selected.
-- to get a count and max on date
SQL> select max(c1) from test.t2;

MAX(C1)
------------------
29-feb-12 13:47:52

1 row selected.

SQL> -- AT THIS POINT A LEVEL 0 BACKUP IS TAKEN (using backup database plus archivelog)
SQL> -- now control files are removed
SQL> select name from v$controlfile;

NAME
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
/ctrl/trgt/control01.ctl
/ctrl/trgt/control02.ctl

2 rows selected.

SQL>
SQL> ! rm /ctrl/trgt/control01.ctl
SQL> ! rm /ctrl/trgt/control02.ctl
SQL> ! ls -ltr /ctrl/trgt/

ls: /ctrl/trgt/: No such file or directory

SQL> 
-- new datafile is added to CNT_TST TABLESPACE and new data is added as well
SQL> ALTER TABLESPACE CNT_TST ADD DATAFILE '/data3/trgt/CNT_TST02.dbf' SIZE 100M AUTOEXTEND OFF;

Tablespace altered.

SQL> ALTER SYSTEM CHECKPOINT;

System altered.

SQL> alter system switch logfile;

System altered.

SQL> /

System altered.

SQL> /

System altered.

SQL> ALTER TABLESPACE CNT_TST ADD DATAFILE '/data3/trgt/CNT_TST03.dbf' SIZE 100M AUTOEXTEND OFF;

Tablespace altered.

SQL>  INSERT INTO
  test.T2
SELECT
  *
FROM
  (SELECT
    SYSDATE,
    ROWNUM C2,
    DECODE(MOD(ROWNUM,100),99,99,1) C3,
    RPAD('A',300,'A') C4
  FROM
    DUAL
  CONNECT BY
    LEVEL <= 10000)
;   2    3    4    5    6    7    8    9   10   11   12   13   14   15

10000 rows created.

SQL> /

10000 rows created.

SQL> commit;

Commit complete.

SQL> INSERT INTO
  test.T2
SELECT
  *
FROM
  (SELECT
    SYSDATE,
    ROWNUM C2,
    DECODE(MOD(ROWNUM,100),99,99,1) C3,
    RPAD('A',300,'A') C4
  FROM
    DUAL
  CONNECT BY
    LEVEL <= 40000)
;  2    3    4    5    6    7    8    9   10   11   12   13   14   15

40000 rows created.

SQL> commit;

Commit complete.

SQL> @datafile
-- to make sure new datafile has been registered with the DB 
Tablespace File Typ Tablespac File Stat    Used MB    Free MB    FILE_MB    MAXMB Datafile_name                     FILE_ID AUT
---------- -------- --------- --------- ---------- ---------- ---------- -------- ------------------------------ ---------- ---
CNT_TST    Datafile ONLINE    AVAILABLE          9         91        100        0 /data3/trgt/CNT_TST03.dbf               9 NO
UNDOTBS1   Datafile ONLINE    AVAILABLE         16         84        100    1,024 /data/trgt/undotbs01.dbf                3 YES
USERS      Datafile ONLINE    AVAILABLE       1153        895       2048    3,072 /data3/trgt/user02.dbf                  5 YES
CNT_TST    Datafile ONLINE    AVAILABLE          9         91        100        0 /data3/trgt/CNT_TST02.dbf               8 NO
SYSAUX     Datafile ONLINE    AVAILABLE        626         35        660   32,768 /data/trgt/sysaux01.dbf                 2 YES
USERS      Datafile ONLINE    AVAILABLE       2031         17       2048    2,048 /data3/trgt/move/users01.dbf            4 YES
SYSTEM     Datafile ONLINE    AVAILABLE        712         58        770   32,768 /data/trgt/system01.dbf                 1 YES
USERS      Datafile ONLINE    AVAILABLE         65         35        100   32,768 /data3/trgt/users03.dbf                 6 YES
CNT_TST    Datafile ONLINE    AVAILABLE         10          0         10        0 /data3/trgt/cnt_tst01.dbf               7 NO

9 rows selected.
-- now the count and max ... note count before backup was 10000 and max(c1) was diff
SQL> select count(*) from test.t2;

  COUNT(*)
----------
     70000

1 row selected.

SQL> select max(c1) from test.t2;

MAX(C1)
------------------
29-feb-12 13:58:25

1 row selected.

SQL> -- now restore starts 
SQL> shutdown abort;
ORACLE instance shut down.
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
[oracle@berry trgt]$ rman

Recovery Manager: Release 11.2.0.1.0 - Production on Wed Feb 29 14:01:48 2012

Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.

RMAN>  connect catalog rman/pass@rcat

connected to recovery catalog database

RMAN>  connect target /

connected to target database (not started)

RMAN> startup nomount;

Oracle instance started

Total System Global Area     188313600 bytes

Fixed Size                     1335388 bytes
Variable Size                125833124 bytes
Database Buffers              58720256 bytes
Redo Buffers                   2424832 bytes

RMAN> restore controlfile from autobackup;

Starting restore at 29-FEB-12 14:02:37
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=20 device type=DISK

recovery area destination: /backup/trgt/flash_recovery_area
database name (or database unique name) used for search: TRGT
channel ORA_DISK_1: no AUTOBACKUPS found in the recovery area
channel ORA_DISK_1: looking for AUTOBACKUP on day: 20120229
channel ORA_DISK_1: AUTOBACKUP found: /backup/trgt/backup/cont_c-3405317011-20120229-09
channel ORA_DISK_1: restoring control file from AUTOBACKUP /backup/trgt/backup/cont_c-3405317011-20120229-09
channel ORA_DISK_1: control file restore from AUTOBACKUP complete
output file name=/ctrl/trgt/control01.ctl
output file name=/ctrl/trgt/control02.ctl
Finished restore at 29-FEB-12 14:02:39

RMAN> alter database mount;

database mounted
released channel: ORA_DISK_1

RMAN> recover database;

Starting recover at 29-FEB-12 14:02:55
Starting implicit crosscheck backup at 29-FEB-12 14:02:55
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=20 device type=DISK
Crosschecked 96 objects
Finished implicit crosscheck backup at 29-FEB-12 14:02:57

Starting implicit crosscheck copy at 29-FEB-12 14:02:57
using channel ORA_DISK_1
Finished implicit crosscheck copy at 29-FEB-12 14:02:57

searching for all files in the recovery area
cataloging files...
no files cataloged

using channel ORA_DISK_1

starting media recovery

archived log for thread 1 with sequence 13 is already on disk as file /redo_archive/trgt/online/redo01.log
archived log for thread 1 with sequence 14 is already on disk as file /redo_archive/trgt/online/redo02.log
archived log for thread 1 with sequence 15 is already on disk as file /redo_archive/trgt/online/redo03.log
archived log file name=/redo_archive/trgt/archive/1_10_776523284.dbf thread=1 sequence=10
archived log file name=/redo_archive/trgt/archive/1_10_776523284.dbf thread=1 sequence=10
archived log file name=/redo_archive/trgt/archive/1_11_776523284.dbf thread=1 sequence=11
archived log file name=/redo_archive/trgt/archive/1_12_776523284.dbf thread=1 sequence=12
archived log file name=/redo_archive/trgt/online/redo01.log thread=1 sequence=13
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 02/29/2012 14:02:59
ORA-01422: exact fetch returns more than requested number of rows
RMAN-20505: create datafile during recovery
RMAN-11003: failure during parse/execution of SQL statement: alter database recover logfile '/redo_archive/trgt/online/redo01.log'
ORA-00283: recovery session canceled due to errors
ORA-01244: unnamed datafile(s) added to control file by media recovery
ORA-01110: data file 9: '/data3/trgt/CNT_TST03.dbf'

RMAN> -- wnet to session 2 and renamed datafile from unammed

-wnet to session 2 and renamed datafile for file unammed

SQL> select name from v$datafile;

NAME
--------------------------------------------------------------------------------
/data/trgt/system01.dbf
/data/trgt/sysaux01.dbf
/data/trgt/undotbs01.dbf
/data3/trgt/move/users01.dbf
/data3/trgt/user02.dbf
/data3/trgt/users03.dbf
/data3/trgt/cnt_tst01.dbf
/oracle/app/product/11.2.0/dbhome_1/dbs/UNNAMED00008
/oracle/app/product/11.2.0/dbhome_1/dbs/UNNAMED00009

9 rows selected.

SQL> alter database create datafile '/oracle/app/product/11.2.0/dbhome_1/dbs/UNNAMED00008' as '/data3/trgt/CNT_TST02.dbf';

Database altered.

SQL> alter database create datafile '/oracle/app/product/11.2.0/dbhome_1/dbs/UNNAMED00009' as '/data3/trgt/CNT_TST03.dbf';

Database altered.

SQL>  select name from v$datafile;

NAME
--------------------------------------------------------------------------------
/data/trgt/system01.dbf
/data/trgt/sysaux01.dbf
/data/trgt/undotbs01.dbf
/data3/trgt/move/users01.dbf
/data3/trgt/user02.dbf
/data3/trgt/users03.dbf
/data3/trgt/cnt_tst01.dbf
/data3/trgt/CNT_TST02.dbf
/data3/trgt/CNT_TST03.dbf

9 rows selected.

After before was done, went back to session 1 and I tried recovered the DB

RMAN> recover database;

Starting recover at 29-FEB-12 14:06:16
using channel ORA_DISK_1

starting media recovery

archived log for thread 1 with sequence 13 is already on disk as file /redo_archive/trgt/online/redo01.log
archived log for thread 1 with sequence 14 is already on disk as file /redo_archive/trgt/online/redo02.log
archived log for thread 1 with sequence 15 is already on disk as file /redo_archive/trgt/online/redo03.log
archived log file name=/redo_archive/trgt/online/redo01.log thread=1 sequence=13
archived log file name=/redo_archive/trgt/online/redo02.log thread=1 sequence=14
archived log file name=/redo_archive/trgt/online/redo03.log thread=1 sequence=15
media recovery complete, elapsed time: 00:00:00
Finished recover at 29-FEB-12 14:06:17

RMAN> alter database open resetlogs;

database opened
new incarnation of database registered in recovery catalog
starting full resync of recovery catalog
full resync complete
starting full resync of recovery catalog
full resync complete

RMAN> exit


Recovery Manager complete.
[oracle@berry trgt]$
[oracle@berry trgt]$
[oracle@berry trgt]$ sq

SQL*Plus: Release 11.2.0.1.0 Production on Wed Feb 29 14:07:18 2012

Copyright (c) 1982, 2009, Oracle.  All rights reserved.


Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options

SQL> alter session set NLS_DATE_FORMAT="dd-mon-yy hh24:mi:ss:
  2
SQL>
SQL> alter session set NLS_DATE_FORMAT="dd-mon-yy hh24:mi:ss";

Session altered.

SQL> select count(*) from test.t2;
select count(*) from test.t2
                          *
ERROR at line 1:
ORA-00376: file 8 cannot be read at this time
ORA-01110: data file 8: '/data3/trgt/CNT_TST02.dbf'


SQL> select max(c1) from test.t2;
select max(c1) from test.t2
                         *
ERROR at line 1:
ORA-00376: file 8 cannot be read at this time
ORA-01110: data file 8: '/data3/trgt/CNT_TST02.dbf'

SQL> alter database datafile 8 online;
alter database datafile 8 online
*
ERROR at line 1:
ORA-01190: control file or data file 8 is from before the last RESETLOGS
ORA-01110: data file 8: '/data3/trgt/CNT_TST02.dbf'

{code}

so what did i do wrong in my recovery that i could not get my data?? how can i avoid this?? and restore my DB?

Edited by: user8363520 on Feb 29, 2012 12:24 PM

user8363520 wrote:
so can get us this or can't do?

You seem to have:
(a) old version of data through rman backup files
(b) old version of the control file
(c) Backed archived redo logs
(d) recovery archived logs that have been recently generated
(e) current online redo logs

Therefore, you should be able to bring back the database in the State wherever it was when you made the abandonment.
I don't do enough laps to be able to cite details on the commands to use (and I often find myself using the command line recovery after that file of rman restore, but the steps you need must be)

Take a copy of security of the data current, archived and online redo log files.
Restore the backup control file, data files, and archived recovery logs
Recover the database by using up to cancel backup control file
You have to do 'create datafile' bit as the collection hits the 'missing file' bit
You will need to provide the names of the archived and log files online redo recovery reached their
(although, presumably, you could leave copies of the logs stored in the default location)

Concerning
Jonathan Lewis
http://jonathanlewis.WordPress.com
Author: core Oracle

5 created recovery media as requested, however factory restore discs, 6 were necessary to my restore!

I clicked on finish, as it were has no more records requested when burning a batch of 5 (as requested by the HP Recovery Media software).

Now when I'm trying to do a factory restore, she prays for disc 6 which of course I did not.

As I have re-formatted everything back a little, I can't use F11 (?) to restore everything back except for my records. My laptop is a CTO dv7t-4100. I live in Australia but a new set of recovery disks are shown only to residents in USA & Canada. Any ideas please?

This can help others in the same situation. http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-62996-1&cc=us&DLC=en&LC=en&JumpID=reg_r1002_auen

Satellite L505D factory restore recovery manually Partition files

Similar Questions

Maybe you are looking for