Satellite L505D-S5986 - trouble installing Ubuntu using live CD/USB

Similar Questions

• Satellite NB10t-A-101 - USB works after installed Ubuntu 14.04

  Hello!

  After installing ubuntu with the process that you gave to me
  (here: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=76813)
  and after a few days of use without problem, my USB port have been disabled.

  You have an idea how to deal with to bring them back?
  If you want any information that will help you, just ask.

  Thanks for the help

  With the USB mouse connected, open terminal and enter: lsusb

  You see the mouse?

  In addition you can wear the battery for at least a minute properly deliver material. Then put back the battery and check if the USB ports are not working.

  Last but not least, you could try to start the device using Live didk/USB to see if the problem is still there.

• Cannot install Ubuntu 11.04 on Satellite L650-I5310

  I can't install ubuntu 11.04 in my system. I see, on start up the ubuntu display. Then it will not work. But I can't install ubuntu 8.04 with any problem.

  A year before I used ubuntu in dual boot mode.
  I don't remember the version. but at that time, some of my option of system like bluetooth, camera etc. were not working.

  So I removed ubuntu. now, I've heard 11.04 is more full of power. I would like to install 11.04 in mode dual boot.
  I downloaded 11.04 32-bit version and writes in a dvd using creater toshiba drive.

  Please help me.

  Hello

  Perhaps the problem is the created disc of Ubuntu.
  Try to install Ubuntu on the USB.

  Here's a nice HowTo that I found in the internet.
  http://blog.sudobits.com/2011/04/23/how-to-install-Ubuntu-11-04-from-USB-or-CD/

• Cannot install Ubuntu 14.04.2 on Acer Aspire E5 - 511G with Windows 8

  Hello. I have tried everything I can to install Ubuntu 14.04.2 alongside Windows 8 on my laptop and I'm not going to be successful. I have Ubuntu on a USB key, and whatever I have, I get the message "the system has no USB boot option." So far, I have:

  -Disabled the quick start.

  -Disabled Secure Boot UEFI firmware settings.

  -Tried to set the USB FDD and USB HDD at the top of the order of priority of Boot and Windows Boot Manager to the lowest priority.

  These measures appear to allow most people to access Ubuntu on their flash drive, but it does not work for me. Anyone know what I can try? Is there anyone here who has the same model and who has installed Ubuntu?

  If USB is not, probably you did not create a proper EFI bootable USB.

  Rufus allows you to create a bootable USB flash drive, selecting only for UEFI system.

  http://Rufus.AKEO.IE/?locale=en_US

  Please re-enable secure too boot.

• Satellite L300D-12U - two problems after installing Ubuntu Linux

  Hello

  I installed Ubuntu 8.10 on my brand-new u. Satellite L300D-12
  So far, everything works fine, but there are two things bother me.

  1. I have problem with suspends to RAM. It does not work. If I use the option to boot, the screen goes black but the laptop is still running (you can hear it).
  In addition, nothing happens when I press the power button to exit the sleep option.
  I completely close the laptop and restart to be back in Ubuntu.
  Maybe someone has some ideas how I can fix the problem?

  My/etc/default/acpi-support have these entries:

  # Comment the following line to disable the ACPI suspend to RAM
  ACPI_SLEEP = true

  # Comment the following line to disable the suspension on disc
  ACPI_HIBERNATE = true

  # Change the following of 'sleep' to use ACPI S1 sleep, rather than S3.
  # This will save less energy, but can run on machines more
  # ACPI_SLEEP_MODE = mem
  ACPI_SLEEP_MODE = standby

  2 battery life
  My current maximum battery life is 01:10 hours. On windows, it's 2 hours >. Maybe someone has some ideas of configuration to increase the time of battery under Ubuntu?

  Any help is appreciated.

  Thanks in advance.

  Kind regards
  Manual

  Hello manual

  I'm really skeptical about Linux here support. I heard that Toshiba will start with Linux support, but of course, it is not started yet.

  If nobody here can offer help I recommend you discuss this on some Linux forum. You have more chance of getting help here.

• Satellite A300 - cannot install Ubuntu - empty flashing command

  Hello

  I want to install Ubuntu 11.10 on my Satellite A300 (psag4e), but when I insert the installation CD, boot hangs after this part of Toshiba with a flashing empty command line.

  What should I do?

  The value of the default BIOS and try again.
  Are you using the original Linux installation disc?

• Re: Cannot use the recovery on Satellite L505D partition

  Hello.

  I am trying to help a friend with their Satellite L505D who had a serious virus problem. I wasn't able to run/install programs with the virus on it. I used a Microsoft tool to remove the rootkit trojan, but I always had problems with viruses. I also lost most of the programs on the computer. All folders were empty (except for some games), so I could not access all of the tools in this way. I could not the machine to load any Toshiba restore utility by pressing zero everything with power. I saw some recovery using F8 during the startup options and had a link to restore the original setting of Toshiba, but clicking that choice has done nothing else a break for a few seconds. I waited several minutes, clicked on it again, rebooted and tried. Nothing. As a side note, once all the while, the recovery partition was visible from explorer.exe. Not before or since.

  So I reformatted the computer with a 64-bit Win7 Home Premium Upgrade disk (the partition of restoration by leaving intact) and then enter the key for the system. Supprise, supprise, it asks me to activate within 3 days.

  My basic question is, can I access this partition recovery in a different way to use it? IE copy its contents, or start on some comand prompt to log e:?

  Thanks in advance for your suggestions.

  Hello

  To be clear: there is only one way to use the saved on the HARD drive recovery image and install it.
  Exact description step by step how you can read on http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm

  If this does not work, only way to do it anyway is to use the recovery DVDs. It is: has your friend created these disks?

• How to install Ubuntu Linux on Satellite C70D-A-111

  How to install Ubuntu on a Satellite C70D-A-111

  Hello

  This video helps you out?

  https://www.YouTube.com/watch?v=18F3CZveMwg

  BR

  Tom

• Can I install Ubuntu in the U940-sp4103gl Satellite SSD?

  Please help me as soon as possible.
  Here are my questions:
  Can I install ubuntu in the ssd from Toshiba u940-sp4103gl?

  How to do this?

  It's urgent, I will appreciate any help. Thanks in advance.

  I put t see no reason why you shouldn't be able to install Linux.
  You would need to make some change in the BIOS of the U940 satellite.
  (1) disable secure boot
  (2) pass the CSM UEFI

  Now all that, you should be able to boot from the disk or USB memory stick.

• Satellite L300D-10B - how to install Ubuntu

  Hello. I recently bought a Satellite L300D-10B and I need to install Linux in dual boot in this laptop.

  Also, I don't want to lose utilities backup of the laptop has preinstalled, in case of emergency.
  Could someone be so kind and tell how to install Ubuntu 8.10 without having to lose the ability to restore the system (for MS vista) during an emergency?

  I also read on the internet of Wubi and you?

  Wubi is an officially Ubuntu install for Windows. Wubi allows you to only install Ubuntu as a Windows application, in a simple and safe way.
  Check it!
  http://wubi-Installer.org/

• New Satellite A300-14R frizzes in installing or using an application heavy

  Last week, I received my Toshiba Satellite A300-14R it al seems to work, but by installing or using a heavy application, the frozed just for laptop and I had to reset the computer. This happened a lot, then Saturday night, I installed Winrar or something while I was listening to music and it happened again, but I could not always reset the laptop so I took out the battery and the laptop could not resume. So I decided to send it to the dealer, he gave me a new.

  So, today, I received the new book, began installing new things and the forzed of the screen. I realized a picture with my phone to show what is happening on the screen.

  http://img232.imageshack.us/my.php?image=22102008132pn7.jpg

  What should I do? I've updated everything in Vista.

  Sorry buddy but you're laptop computer real destroyer. ;)
  Of course, it's just a joke!

  Stand by. Such screen appears from the first second when you start your laptop?
  What happens if you install Vista using F8 and repair my computer in advanced startup parameters?
  The same thing again?

  Anyway, bring it back and ask for Exchange. This certainly isn't normal behavior.

• I use hp g32, I can't able to install ubuntu 11.10 on my laptop,

  Hello

  I use G32 with windows7

  I tried to install ubuntu 11.10 in my book, it shows an error like "'windows Backend' object has no attribute 'iso_path'" what is the problem and what can I do?

  You try to install Ubuntu via WUBI?

  It seems that you are not alone in this problem, but seems to happen to various other users as well. It would probably be a bug or a bad disc/download Ubuntu. Many users have tried fixing this error by disconnected from the internet and try to install Ubuntu.

  I suggest you to send your query on the ubuntu forums that would be the best place to get your landline number.

• Hello. I'm having trouble installing my Photoshop CS3 software. I use a PC. My computer recently had a virus and the it consultant all deleted and reinstalled Windows Start program with all updates. My operating system

  Hello.

  I'm having trouble installing my Photoshop CS3 software.

  I use a PC. My computer recently had a virus and the it consultant all deleted and reinstalled Windows Start program with all updates. My operating system is "Microsoft Windows 7 Home premium 2007 - with updates added.

  The version of photoshop that I have is 'Adobe Photoshop CS3, 2007. I installed Photoshop CS3 which seemed to install properly. I activated the dics and inserted the serial number. Activation complete. I had a problem with the registration with the following message through "a problem has been experienced so he was trying to send information on the internet".  I had a problem with look at a. CR2 file but I got a converter of Microsoft 'CameraCode '. I can use Photoshop software. I can't use a software link with Photoshop CS3 I was using before. It's "NIK software - Silver Efex Pro". This means that on the section "filter Photoshow. Can I use the software, but it does not save the changes I made. When I turn off the computer Photoshop CS3 is deleted from my computer. I got LIGHTROOM but software that works very well.

  The summaries. I can load Photoshop and use and save the changes, but when I turn off my computer the software is removed from the hard drive. But I can't get the link software - Nik software - Silver Efex Pro. Please can you advise me what I should do to get my software working properly again.

  Thank you.

  Keith Fernandez

  Once the software is installed, it will not be removed under normal circumstances.

  I do not know if your computer is still infected and it is removed or the problem is that you can't 'see' photoshop' but it is always installed.

  to verify this, check the installation directory and check its size on your hard drive.

• Hello. I'm having trouble installing my Photoshop CS2 software. I use a PC. My computer recently had a virus and the it consultant all deleted and reinstalled Windows Start program with all updates. My operating system

  Hello.

  I'm having trouble installing my Photoshop CS2 software.

  I use a PC. My computer recently had a virus and the it consultant all deleted and reinstalled Windows Start program with all updates. My operating system is "Microsoft Windows 7 Home premium 2007 - with updates added.

  The version of photoshop that I have is 'Adobe Photoshop CS3, 2007. I installed Photoshop CS3 which seemed to install properly. I activated the dics and inserted the serial number. Activation complete. I had a problem with the registration with the following message through "a problem has been experienced so he was trying to send information on the internet".  I had a problem with look at a. CR2 file but I got a converter of Microsoft 'CameraCode '. I can use Photoshop software. I can't use a software link with Photoshop CS3 I was using before. It's "NIK software - Silver Efex Pro". This means that on the section "filter Photoshow. Can I use the software, but it does not save the changes I made. When I turn off the computer Photoshop CS3 is deleted from my computer. I got LIGHTROOM but software that works very well.

  The summaries. I can load Photoshop and use and save the changes, but when I turn off my computer the software is removed from the hard drive. But I can't get the link software - Nik software - Silver Efex Pro. Please can you advise me what I should do to get my software working properly again.

  Thank you.

  Keith Fernandez

  Hi Keith,

  You won't be able to re - install using the discs and the number of series that you used initially, but we have a solution.

  The activation for more server CS2 is no longer in service. For this reason, we did a version of these titles of software available that doesn't require activation. This is for users who already buy the software.  For more details and specific links for the software, please see the following link:

  Activation server stops for Creative Suite 2 and Acrobat 7 product Macromedia

  Instead of your old serial number, use the one shown next to the download link: download Acrobat 7 and CS2 products

  Guinot

• Satellite L505D - problem with mode standby in Windows 7

  It's me again, in the last thread:

  "Hello friends,

  I have a big problem when Windows 7 updated itself. I have a laptop Toshiba Satellite L505D. When I close the lid, it will automatically 'sleep' mode. Unfortunately, the screen is black and the laptop is still in progress, I have to stop it and then turn. Is it a problem with the driver 'stack '? Please, help me :)). "

  The mode 'sleep' worked perfeclty for a few days and it's still gone... What more when I try to enter the mode "sleep" I can't do anything on the laptop, it still works on the white screen and the transformers fan works high speed. In recent days, when the "sleep mode" worked, windows has no update...

  I don't know what is happening... :) Weird problem, isn't?

  It is not easy to say why this is happening. In your last post, you wrote about some updates of windows. Who knows what's wrong there.
  If nothing is done, not even system restore and you want to use the standby mode I recommend you save all your data and install the new OS by using recovery mode.

  With the settings everything's going to be OK but then be careful with updates.