Satellite L50D-B-147 - refresh after no Wi - Fi connection

Similar Questions

• Touchpad on my Satellite L50D-B stops working after connecting

  Hello

  I bought L50D-B 12/2014, 2 days ago, it started.
  After I login I have the touchpad work although all commissioning, but once the start finished it stops.

  I use a bluetooth mouse, but have used same mouse since I bought the laptop, the printer, the same wifi connection. Same Antivirus software.

  The only thing I can think of that changed is that I removed Norton trial for backup software remotely.

  Any ideas.

  Thank you :-)

  Hello

  Touch pad can be turned on and off using the FN + F5.
  Have you checked this feature in the past?

  In addition, you can try to uninstall the touchpad driver (Control Panel? programs and features)
  Here, you should see the momentum or Synaptics touchpad driver.

  After you have uninstalled the driver for the touchpad, visit the Toshiba UE driver page, and then download and reinstall the driver from the touchpad still. Reboot the laptop and test if it helped to solve your problem

• Satellite L50D: no video noise after installing MS Essentials 2012

  My new laptop has ever its registered for SKYPE video messaging.
  Little is boring, like Skype video calls and other similar applications, no problem with microphones/noise etc.

  Since download Windows Essential 2012, I have no sound for videos which worked fine previously. Specifically, I wanted to use Movie Maker. Do I need a sound card to day?

  I uninstalled and reinstalled and it's the same story every time.
  NO SOUND.

  Any help appreciated thanks.

  Could you explain your problem exactly? What is the problem with the noise exactly?
  The problem with the particular video file format using the Movie Maker only?
  Or do you watch sound, for example Youtube videos and movies on DVD?

• L50D-B-147 satellite startup problems

  Hi all, I had a L50D-B-147, had again since July and it has been great.
  Lately, although something happened I hope you might be able to help with, it is under warranty then can be sent away to be looked at but I thought I would ask here first in case it is something I can fix it.

  That's the problem - no matter how long the laptop is off, be it overnight or just for 5 minutes, the first time that I turn it on it shows the Toshiba load screen then turns off. I don't get the circle loading or anything else.

  However, when I turn it on again, it loads fine and I get no problems all day.

  BIOS is up to date, as well as all other drivers. I tried to start without power connected, then with power but without battery. Tried without anything plugged into the USB, and I took everything out of Windows startup, but none of that made a difference.
  It does feel not hot and is sitting on a table with a fan under it.

  Is there anything else I can try before I send it away? If it helps, I'm under 64-bit Windows 10 and since the day he arrived. It came with 8.1.

  Thanks in advance.

  Anyone?

• Satellite L50D-C - marketing questions

  I've had my Toshiba Satellite L50D-C since October 19, 2015 and almost day 1, I had problems turning on the laptop in standby mode. I press the power button and the led lights as the num snaps and caps lock lights up. The power light stays on as the num snaps but the light caps lock turns off, then I wait and wait and nothing happens. I found that if I hold down the button for a few seconds, the laptop turns off and then I am able to restart.

  I asked questions about the place of purchase and they told me that I have to remove the battery and press the Start button at least 10 seconds, effectively discharging the power as in a flash said me and then I should find the computer laptop mode voltage standby.

  I did and it works very well for a few days then the same problems of returns, again, the '' solution '' and there I go again.

  While this solves my problem, for a few days, I find it very strange that it is a necessary step should be taken. My husband also has a Toshiba Satellite, although a year or more so than mine, and he has never had this problem.

  Is this normal? .. Can it be solved?... under warranty? .. What should I do? .

  Thanks to anyone who can help me.

  Lainie

  Hello

  I have exactly the same problem, but also find that even after changing my power settings the laptop will cut itself in hibernation/sleep after a period of inactivity. I have to then press the power button, nothing happens except the power light is on, then I have to press the power button for about 5 seconds and then turn it back on again... It's such a pain... I hope someone can help answer these questions on how to fix soon :-(

• Card problems WiFi - Satellite-L50d-c-12z

  Hello everyone, I recently bought this beautiful model of portable Satellite L50D-c-12z. I have a problem with the original wireless card because it is of poor quality and I decided to replace it with a better. I bought an intel 7265ngw BN. After having mounted the laptop detects the bluetooth and it works fine, but the wireless part does not work and gives me error device cannot start. (Code 10). who can tell me whether or not this wireless card is compatible with my laptop? Thanks in advance

  I have 8.1 windows x 64

  Intel adapters may have compatibility problems. You may have more luck with a Realtek or Atheros card.

• How to check the graphics chip Radeon R5 M230 on Satellite L50D-B-11N?

  Hello!

  I just bought Satellite L50D-B-11N, with processor AMD A6 (with the graphics chip of R4) AND R5 M230 in graphics card.

  However, it is R4 'chart' that is used by default and I can't choose R5 "graphics card"!

  Yet, I can verify that this is true now by Device Manager. I discovered R4 R5 AND under "Graphics cards", both enabled.

  I tried in the bios setup, but I don't see anything on "graph CADS" and choice, anything under Windows8.1 by applications.

  The video quality is good, but I would like to make full use of the performance of the graphics card R5.
  Please, how are going us?

  Thank you.

  Greetings from France.

  Hello

  Processor AMD A6-6310 contains a graphics unit Radeon R4.
  This GPU R4 is part of the CPU.
  In addition the laptop was equipped with external graphics card AMD Radeon R5 M230 fueling more graphic. This is useful if it is to play some games or running high-performance graphics applications.

  It s recommended to use the internal GPU if you run Notepad in mode battery (battery). This saves energy and reduces the internal temperature

  To switch to the external GPU, right click on the desktop
  In Catalyst Control Center Power, click on select Maximum Performance when it is plugged

  Then in global settings of Switchable Graphics also choose maximize Performance

  Then click on the switchable graphics Application settings
  Now, you would be able to add an app (game) that could use this graphics card settings
  Simply tap the exe of the game and add to the list of applications.
  After that, you will see the exe file in the list. Click the graphics settings and set it to high performance.

  You can also view youtube videos showing you how to switch between GPUS

• Satellite L50D - no boot device please don't restart

  Hello

  I'm trying to fix my parents laptop: it's a Satellite L50D-B - 14 p. It shows the error "No. Bootable Device please restart System" at startup. So far, I tried disabling "secure boot" and by replacing the boot mode 'boot CSM', without success.

  I can see in the settings of the BIOS that the HARD drive is still recognized, is not dead. I don't have the installation diskettes.

  Any advice on what to try next would be greatly appreciated.

  Thank you.

  Any ideas on how I can proceed?

  Is the fact that the HARD drive can still be seen in the BIOS, means that it is not dead? At the MS DOS command prompt, I typed in C: and it found nothing - it gives me to think that the hard drive may indeed be dead?

  I also ran a program of removal of data from a bootable CD. He managed to acknowledge that the HARD drive has existed and acknowledged that he had 932 GB. However, it said 0 bytes were free (which is odd).

  Any ideas would be appreciated.

  Thank you.

• Satellite L50D-C-18J - two modules of RAM but single track only

  Hi all

  A few days ago I got the Toshiba Satellite L50D-C-18J with A10 - 8700P AMD processor.

  Factory 1 with 8 GB (DDR3L 1600 MHz) memory module are installed. According to various tools (AIDA64, HWInfo64, CPU - Z), the memory will operate at 668 MHz, that is to say 1333 MHz mode.

  The free memory slot I have with another 8 GB DDR3L held at 1600 MHz (with the same memory timings, but other manufacturers). The Bank will continue to operate only in single channel mode and not in dual channel mode. The A10 CPU should support.

  I have installed the latest version of the BIOS.

  We have an idea of how I have the dual-channel mode and can set the frequency of the memory? In the BIOS, there is unfortunately almost no parameter or someone has the same laptop model and with it dual-channel mode is running?

  Thanks and greetings

  Mario

  Hello. Another manufacturer is not a problem.
  You should check the following:
  (1) make sure that the two RAM modules operating at 1.35v. Search the Internet, what should be the supply voltage of the RAM you have installed. If this does not work at 1.35v then that's the problem.
  (2) whether these RAM modules supports ECC. If one of your RAM supports ECC and the other is not, that's the problem.

• Re: Satellite Pro A200 - black screen after the BIOS screen

  Hello
  I'm new to the forum and have a big problem. So, any help is welcome and appreciated.

  My Satellite Pro A200 turns black after the BIOS screen and a black screen with a blinking cursor. Also just as the screen goes black a beep can be heard which shows windows boot.
  I can access the toshiba Setup screen but not the installation of security mode.

  Kind regards

  Hello

  You wrote that you can access the BIOS, but have you checked if the HARD drive is recognized properly? Perhaps because the computer cannot start HDD isn't recognized then you should check this.

  If the HARD drive is recognized, I would try a Toshiba Recovery disk recovery facility. It seems that Windows isn't able to start and if you reinstall the whole system should help get rid me of this. Go to the start menu and select the CD/DVD drive as a boot device.

  Check this box!

• Satellite L50D-B - 16 M back to factory default?

  Hello

  Is there an easy way to put the Satellite L50D-B - 16 M to its parameters by default without having to go through the process of making recovery discs and all that?

  There is more imporant on this file, I am looking for a simple way to back to its default settings. (The old trick with the pressing 0 while turning it doesn't seem to work).

  Thank you!

  The old trick with the pressing 0 while turning it doesn't seem to work

  By pressing the 0 key, began the recovery of HARD drive partition recovery.

  You could also turn on the computer, press and hold the "F12" key while the Toshiba logo appears.
  Then you should see the start menu and the last option called HDD recovery should also allow you to start the HARD drive recovery process...

  But this only works if the HARD drive has not been changed and the recovery files are always available.

• Satellite L10 - Hotkey.exe error after booting Windows 2000

  I've installed Windows 2000 on my Satellite L10 rather
  XP. After installing the utility Hotkey-I get an Error Message at every boot:

  Hotkey.exe - Entry Point not found
  The procedure entry point WTSUnRegisterSessionNotification could not be loaded into the WTSAPI32.dll dynamic link library.

  Same error Message When you try to manually start the Hotkey.exe.

  How can I solve this problem? The system works, but the
  Keys not.
  Thank you in advance for help!

  P.S.: As I read on the web, this error has nothing to do with the missing operating system XP - maybe the HotKey software does not work with Windows 2000. Where can I get a Hotkey software work for Windows 2000 for Satellite L10?
  I try to find it on the download from Toshiba site, but there is that some drivers for the L10 on Toshiba.com and the European server are only readers for XP :(

  Hi turmeric

  All the drivers, tools, and utilities are designed separately for each operating system. This means that you can not use tools designed for Windows XP Home edition with other operating system. You don't find utilities and tools because your device is not supported for the Windows 2000 operating system.
  I'm sorry.

• Satellite L300 - will not start after the installation of Skype

  My Toshiba Satellite L300 won't start after installing Skype.
  This happened to someone else, and can I do?

  Thank you.

  I think Skype is probably the most used messenger and ideal application for communication.
  It is professionally designed and programmed. As you know in recent years, it has been offered in many different versions and it is always better and better.

  So I think that Skype itself is probably not the problem. I know that a lot of people also use Skype and I've never heard problem described.

  Anyway, what you can try is to remove Skype and try to install it again. Try also push the BONES at that earlier time. Maybe some Microsoft updates are responsible for the stability of the software.
  It's really not easy to say what the problem is here.

• Satellite A100-906 each time after power button

  Satellite A100-906 each time after pressing the button will stop exactly in 1 minute.
  And in Setup mode too.

  What it means?

  Hello

  Are you sure that the laptop is connected correctly to the mains?
  Is the battery ok?

  My battery is very old and the laptop runs only 2 min with battery.
  So I have to use the laptop still plugged into the mains.

• No Player DVD on Satellite C50-B-147

  Hello!

  I find it odd that there is no dvd drive on this pc. Or the other!

  I wonder if the Satellite C50-B-147 it is a way to support a restart on usb if something is wrong with Windows?

  Thanks in advance for the help.

  Alain

  Weird or not, but it turns out that the hardware configuration is not the same on all models of laptops so we can choose the best model for us and our needs.
  When you buy this laptop model pre-installed with original recovery image you have the ability to create the recovery image to the top.

  Using preinstalled Toshiba recovery media creator you can create the bootable USB key and use it for the installation of Windows (recovery image), if something is wrong with Windows or the HARD drive.