Satellite L550 - cannot load the sound driver in Win XP

Similar Questions

• Satellite L550 - cannot install the display driver for Vista 64 bit

  Hello

  I have a problem with my L550. The display driver does not work after installing Vista Ultimate 64. What can I do? I launched the driverpakage from the Toshiba site. It has been extracted, but after this procedure,... nothing!

  There is only the standard VGA graphik installed in the configuration.

  Thank you!!

  Hello!

  Did you start the file setup.exe after extraction of the files?
  Go to the directory where the drivers were extracted and run the Setup file. Follow the instructions on the screen and after reboot, the drivers must be installed.

  Check it!

• Windows cannot load the device driver for this hardware (HL-DT-ST DVDRAM GH40F SCSI CdRom Device) because the driver may be corrupted or missing. (Code 39)

  Original title: the answer useful?

  Help, please! Windows cannot load the device driver for this hardware (HL-DT-ST DVDRAM GH40F SCSI CdRom Device) because the driver may be corrupted or missing. (Code 39)

  Hello

  Code 39 means that the driver is corrupted or missing.

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  --------------------------------------------------------------

  Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
  are you can reinstall the 'old'. Many use Windows default drivers however some special aura
  ones. Also check the website of the manufacturer of the car.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Cannot load the class driver: com.mysql.jdbc.Driver

  Hello
  
  I am new to Oracle solutions and I am trying to deploy a simple ADF Application that retrieves data from a mysql database, I already set up the mysql connector in libraries, but when I try to deploy the application, the following message appears for me:
  
  
  Using the 7101 port *.
  C:\Users\FBELLUCO\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\bin\startWebLogic.cmd
  [waiting for the server to complete its initialization...]
  .
  .
  Arguments of memory in JAVA: - Xms256m-Xmx512m - XX: CompileThreshold = 8000 - XX: PermSize = 128 m - XX: MaxPermSize = 512 m
  .
  Start mode of WLS = development
  .
  CLASSPATH=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar; C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar; C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar; C:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar; C:\Oracle\MIDDLE~1\modules\features\weblogic. Server.modules_10.3.5.0.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar; C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/Ant-all.jar; C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/Ant-contrib.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar
  .
  Path = C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\native; C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin; C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\Bin; C:\Oracle\MIDDLE~1\JDK160~1\jre\bin; C:\Oracle\MIDDLE~1\JDK160~1\Bin; C:\Program Files (x86)\SenchaSDKTools-2.0.0-beta3; C:\Windows\System32; C:\Windows; C:\Windows\System32\Wbem; C:\Windows\system32\WindowsPowerShell\v1.0\; C:\Program Files\Intel\WiFi\bin\; C:\Program Files\Fichiers Files\Intel\WirelessCommon\. C:\Program Files (x 86) \Microsoft ASP.NET\ASP.NET Web Pages\v1.0\; C:\Program Files\Microsoft SQL Server\110\Tools\Binn\; C:\Program Files (x86)\GtkSharp\2.12\bin; C:\Program Files\Intel\WiFi\bin\; C:\Program Files\Fichiers Files\Intel\WirelessCommon\. C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
  .
  ***************************************************
  * To start WebLogic Server, use a username and *.
  * password assigned to an administrator-level user. For *.
  * server administration, using the WebLogic Server *.
  * the http://hostname:port\console console *.
  ***************************************************
  from weblogic with the Java version:
  Java version "1.6.0_24".
  Java (TM) SE Runtime Environment (build 1.6.0_24 - b50)
  Java Client VM (build 19.1 - b02, mixed mode)
  WLS starting with line:
  C:\Oracle\MIDDLE~1\JDK160~1\bin\java-client-Xms256m-Xmx512m - XX : CompileThreshold = 8000 - XX : PermSize = 128m - XX : MaxPermSize = 512m-Dweblogic.Name=DefaultServer-Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy-Djavax.net.ssl.trustStore=C:\Oracle\Middleware\wlserver_10.3\server\lib\DemoTrust.jks-Dweblogic.nodemanager.ServiceEnabled=true - Xverify : aucun-da-Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3-Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server-Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server-Djps.app.credential.overwrite.allowed=true-Dcommon.components.home=C:\Oracle\MIDDLE~1\ORACLE~1 - Djrf.version=11.1.1 - Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger-Ddomain.home=C:\Users\FBELLUCO\AppData\Roaming\JDEVEL~1\SYSTEM~1.13\DEFAUL~ 1-Djrockit.optfile=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt-Doracle.server.config.dir=C:\Users\FBELLUCO\AppData\Roaming\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1\servers\DefaultServer-Doracle.domain.config.dir=C:\Users\FBELLUCO\AppData\Roaming\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1-Digf.arisidbeans.carmlloc=C:\Users\FBELLUCO\AppData\Roaming\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1\carml-Digf.arisidstack.home=C:\Users\FBELLUCO\AppData\Roaming\ JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1\arisidprovider-Doracle.security.jps.config=C:\Users\FBELLUCO\AppData\Roaming\JDEVEL~ 1\SYSTEM~1.13\DEFAUL~1\config\fmwconfig\jps-config.xml-Doracle.deployed.app.dir=C:\Users\FBELLUCO\AppData\Roaming\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\servers\DefaultServer\tmp\_WL_user-Doracle.deployed.app.ext=\--Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1-Djava.protocol.handler.pkgs=oracle.mds.net.protocol-Dweblogic.jdbc.remoteEnabled=false-Dwsm.repository.path=C:\Users\FBELLUCO\AppData\Roaming\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\oracle\store\ GMDS-Dweblogic.management.discover=true-Dwlw.iterativeDev=-Dwlw.testConsole=-Dwlw.logErrorsToConsole=-Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sysext_manifest_classpath ; C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath weblogic. Server
  < 19/08/2012 BRT 16h40min52s > < Info > < security > < BEA-090905 > < disabling CryptoJ JCE provider auto-intégrité for better startup performance. To allow this control, enter - Dweblogic.security.allowCryptoJDefaultJCEVerification = true >
  < 19/08/2012 BRT 16h40min52s > < Info > < security > < BEA-090906 > < change the default Random Number Generator in RSA CryptoJ of ECDRBG to FIPS186PRNG. To disable this change, specify - Dweblogic.security.allowCryptoJDefaultPRNG = true >
  < 19/08/2012 BRT 16h40min53s > < Info > < WebLogicServer > < BEA-000377 > < ہ WebLogic Server Java hotspot Client VM Version 19.1 - b02 Sun Microsystems Inc. >
  < 19/08/2012 BRT 16h40min53s > < Info > < management > < BEA-141107 > < Version: WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 1398638 2011 >
  < 19/08/2012 16h40min54s BRT > < opinion > < WebLogicServer > < BEA-000365 > < server status changed initially >
  < 19/08/2012 BRT 16h40min54s > < Info > < WorkManager > < BEA-002900 > < self-adjusting Initializing of thread pool >
  < 19/08/2012 16h40min54s BRT > < opinion > < LoggingService > < BEA-320400 > < C:\Users\FBELLUCO\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log log file will be rotated. Reopen the log file if stopped tailings. This can happen on some platforms such as Windows. >
  < 19/08/2012 16h40min54s BRT > < opinion > < LoggingService > < BEA-320401 > < log file was shot in C:\Users\FBELLUCO\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00005. Log messages will continue to be logged in C:\Users\FBELLUCO\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log. >
  < 19/08/2012 16h40min54s BRT > < opinion > < Log Management > < BEA-170019 > < C:\Users\FBELLUCO\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log server log file is opened. All events in the log server-side will be written to this file. >
  < 19/08/2012 16h40min57s BRT > < opinion > < security > < BEA-090082 > < security initialization using security realm myrealm. >
  < 19/08/2012 16h41min00s BRT > < opinion > < WebLogicServer > < BEA-000365 > < server changed to STANDBY status >
  < 19/08/2012 16h41min01s BRT > < opinion > < WebLogicServer > < BEA-000365 > < server status changed initially >
  < MessageLocalizationHelper > < getLocalizedMessage > O recurso pacote 'oracle.jrf.i18n.MBeanMessageBundle_pt_BR' com a chave 'oracle.jrf.JRFServiceMBean.checkIfJRFAppliedOnMutipleTargets' nao faith sown.
  < 19/08/2012 16h41min06s BRT > < opinion > < LoggingService > < BEA-320400 > < C:\Users\FBELLUCO\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log log file will be rotated. Reopen the log file if stopped tailings. This can happen on some platforms such as Windows. >
  < 19/08/2012 16h41min06s BRT > < opinion > < LoggingService > < BEA-320401 > < log file was shot in C:\Users\FBELLUCO\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log00005. Log messages will continue to be logged in C:\Users\FBELLUCO\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log. >
  < 19/08/2012 16h41min06s BRT > < opinion > < Log Management > < BEA-170027 > < server has established the connection with the Service of diagnosis level domain successfully. >
  < 19/08/2012 16h41min06s BRT > < opinion > < WebLogicServer > < BEA-000365 > < server status changed to ADMIN >
  < 19/08/2012 16h41min06s BRT > < opinion > < WebLogicServer > < BEA-000365 > < Server State has changed for RESUMING >
  < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "Default [11]" now listen on 0:0:0:0:0:0:0:1:7101 for iiop, t3, ldap, snmp, http protocols. >
  < 19/08/2012 16h41min07s BRT > < WARNING > < Server > < BEA-002611 > < Hostname "FBELLUCO PC", corresponds to multiple IP addresses: 192.168.2.165, fe80:0:0:0:5d2e:304 b: c1ee:fef9 12, fe80:0:0:0:140f:246e:4e4b:5580% 18%, 2001:0:4137:9e76:140f:246e:4e4b:5580 >
  < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "Default [10]" now listen on 127.0.0.1:7101 for iiop, t3, ldap, snmp, http protocols. >
  < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "Default [4]" now listen on fe80:0:0:0:140f:246e:4e4b:5580:7101 for iiop, t3, ldap, snmp, http protocols. >
  < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "Default [3]" now listen on fe80:0:0:0:0:5efe:c0a8:2 a 5:7101 for iiop, t3, ldap, snmp, http protocols. >
  < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "[1] by default ' is now listening on 192.168.0.135:7101 for iiop, t3, ldap, snmp, http protocols. >
  < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "Default" is now listening on 2001:0:4137:9e76:140f:246e:4e4b:5580:7101 for iiop, t3, ldap, snmp, http protocols. >
  < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "Default [6]" is now listening on fe80:0:0:0:5cee:582d:c1d2:274 d: 7101 for iiop, t3, ldap, snmp, http protocols. >
  < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "Default [9]" is now listening on fe80:0:0:0:5 ca 1:539 a: e6ac:87 d: 7101 for iiop, t3, ldap, snmp, http protocols. >
  < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "Default [7]" is now listening on fe80:0:0:0:9808:46 d 3: f632:c499:7101 for iiop, t3, ldap, snmp, http protocols. >
  < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "Default [8]" now listen on fe80:0:0:0:5d2e:304 b: c1ee:fef9:7101 for iiop, t3, ldap, snmp, http protocols. >
  < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < channel 'by default [5]' now listen on fe80:0:0:0:5d5a:6be2:c66e:a30e:7101 for iiop, t3, ldap, snmp, http protocols. >
  < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "Default [2]" is now listening on 192.168.2.165:7101 for iiop, t3, ldap, snmp, http protocols. >
  < 19/08/2012 16h41min07s BRT > < opinion > < WebLogicServer > < BEA-000331 > < started WebLogic Admin Server "DefaultServer" domain "DefaultDomain" running in development Mode >
  < 19/08/2012 16h41min07s BRT > < opinion > < WebLogicServer > < BEA-000365 > < Server State has changed in the RACE >
  < 19/08/2012 16h41min07s BRT > < opinion > < WebLogicServer > < BEA-000360 > < server started operation >
  IntegratedWebLogicServer start time: 16364 ms.
  IntegratedWebLogicServer has begun.
  [Run application on Server Instance IntegratedWebLogicServer ASSANE...]
  [16: 41:08]-deployment began. ----
  [16: 41:08] the target platform's (Weblogic 10.3).
  [16: 41:09] recovery of the existing application information
  [16: 41:09] analysis of the dependence running...
  [16: 41:09] deployment 2 profiles...
  [16: 41:10] wrote on the Web for C:\Users\FBELLUCO\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\o.j2ee\drs\IBTI\ViewControllerWebApp.war application Module
  [16: 41:10] wrote the Module Enterprise Application to C:\Users\FBELLUCO\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\o.j2ee\drs\IBTI
  [16: 41:10] Application deployment...
  < 19/08/2012 16h41min11s BRT > < WARNING > < J2EE > < BEA-160195 > < application version of the lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored, because the ASSANE application is not versioned. >
  < 19/08/2012 16h41min11s BRT > < error > < hats > < BEA-149265 > < error has occurred in the execution of the request for deployment with the ID ' 1345405270810 'for task ' 0'. Error: ' weblogic.application.ModuleException: '
  weblogic.application.ModuleException:
  at weblogic.jdbc.module.JDBCModule.prepare(JDBCModule.java:302)
  at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
  to weblogic.application.internal.flow.DeploymentCallbackFlow$ 1.next(DeploymentCallbackFlow.java:517)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
  at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:159)
  Truncated. check the log file full stacktrace
  Caused by: weblogic.common.resourcepool.ResourceSystemException: cannot load the class driver: com.mysql.jdbc.Driver
  at weblogic.jdbc.common.internal.JDBCUtil.parseException(JDBCUtil.java:301)
  at weblogic.jdbc.common.internal.ConnectionEnvFactory.loadDriver(ConnectionEnvFactory.java:75)
  to weblogic.jdbc.common.internal.ConnectionEnvFactory. < init > (ConnectionEnvFactory.java:131)
  at weblogic.jdbc.common.internal.ConnectionPool.initPooledResourceFactory(ConnectionPool.java:712)
  at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.java:235)
  Truncated. check the log file full stacktrace
  >
  < 19/08/2012 16h41min11s BRT > < WARNING > < hats > < BEA-149004 > < failures have been detected all introducing deploy application task "ASSANE. >
  < 19/08/2012 16h41min11s BRT > < WARNING > < hats > < BEA-149078 > < message 149004 track battery
  weblogic.application.ModuleException:
  at weblogic.jdbc.module.JDBCModule.prepare(JDBCModule.java:302)
  at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
  to weblogic.application.internal.flow.DeploymentCallbackFlow$ 1.next(DeploymentCallbackFlow.java:517)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
  at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:159)
  Truncated. check the log file full stacktrace
  Caused by: weblogic.common.resourcepool.ResourceSystemException: cannot load the class driver: com.mysql.jdbc.Driver
  at weblogic.jdbc.common.internal.JDBCUtil.parseException(JDBCUtil.java:301)
  at weblogic.jdbc.common.internal.ConnectionEnvFactory.loadDriver(ConnectionEnvFactory.java:75)
  to weblogic.jdbc.common.internal.ConnectionEnvFactory. < init > (ConnectionEnvFactory.java:131)
  at weblogic.jdbc.common.internal.ConnectionPool.initPooledResourceFactory(ConnectionPool.java:712)
  at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.java:235)
  Truncated. check the log file full stacktrace
  >
  [16: 41:11] # incomplete deployment. ####
  [16: 41:11] remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
  # Cannot run application ASSANE due to the deployment on IntegratedWebLogicServer error.
  [Application ASSANE stopped and cancelled Server Instance IntegratedWebLogicServer]
  
  Thank you!

  Add
  mysql_jconnector.jar in the C:\bea\jdeveloper\\system11.1.1.5.37.60.13\DefaultDomain\lib folder

• Satellite A200 - cannot load the keyboard and touchpad drivers

  Hello

  I have SATELLITE A200-10W, HOME PREMIUM installed with SP1. I use it more than a year. All of a sudden it happened that my laptop stop responding and then I rebooted.
  My touchpad and keyboard stop working, but I connect as a user of the window through KEYBOARD to the SCREEN.
  In Device Manager I CAUTION icon on the keyboard and inside, it says under DEVICE STATUS which

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (CODE 39). »

  i8042prt.sys and kbdclass.sys files are attached as a driver in detail.

  My keyboard works during BIOS and even when I boot with the CD bootable operating system WINPE, my keyboard is not working, even typing everything inside this environment, but not in the normal window.

  I tired restore my laptop
  LAST GOOD CONFIGURATION
  Apply unsigned drivers
  Safe MODE (does not work yet)

  Downloaded some software like driver detected etc, but... NO RESULTS.

  I don't want to go for WINDOW RECOVERY CD for OS to re - install
  I have a large number of parameters, I don't want to erase...

  IS THERE A SOLUTION FOR IT?

  My warranty ended already after one year

  pls help and answer...

  That s a great info. Thanks for the clarification!

  Good bye

• Equium - Windows cannot load the device driver for USB dongle

  I've been using a dongle for about a month without problems, but now it is said (in Device Manager) "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  -what it means and how can I solve this problem?

  Hi Ozcat,

  What USB dongle is that exactly?
  What cell phone do you have?
  What operating system is installed?
  Have you already tried to reinstall the driver for USB dongle?

• Satellite A300D-15B PSAKCE - cannot install the audio driver for Win XP 64 bit

  Hi all

  This is my first post here after hidden during the last week or so, my hope is that somewhere it helps and hope so!

  I have a wonderful Toshiba A300D-15B PSAKCE with RAM 4 GB/O, but I suffer from some problems RESEARCH Holy function cannot resolve. I use this laptop as a box of development for uni/work unfortunately...

  After a complete nightmare and Vista32, Vista64, I decided to go back to windows XP32, however this custom install, continues to claim a failure of a CRC file after (and Yes, that's with SATA in IDE mode and a disc of XPSP2)

  I decided that I really DON'T want to goback to Vista, so installed Windows XP64. Now the first installation is very easy, I have the basic configuration, the chipset, graphic, network, CPU, usb, fine... except basic... and that's where I lost most of my hair... SOUND!

  First try to install the results of the pilot of his failure, claiming the mmdriver.inf cannot be found or corrupted, obviously I checked, and yes there it is, downloaded pleasure the MMDRIVER. INF and placed it system32 and the installation always fails.

  I also tried a "manual installation", in .inf files... which includes pilots XP32/64 and Vista 32/64 bit drivers, still the same
  problem, the driver continues to not install. I am going bald. Exceptional drivers who moved there

  * - Audio device on High Audio Defninition Bus *.
  * - Mass Storage Controller *.
  * - Modem Device on High Audio Defninition Bus *.
  * - USB device *.

  If what follows is any help, (Sandra 2008)

  * - Disk controller *.
  (AMD (ATI) SB700 SATA Controller [IDE Mode])

  * - Disk controller *.
  (Toshiba SB700 IDE)

  * - Audio device *.
  (Toshiba IXP High Definition Audio Controller)

  * - Audio Codec *.
  (Conexant Systems 5051 hours)

  * - Audio device *.
  (AMD (ATI) [Radeon HD 3600 Series] RV635 Audio device

  Now, as I write this, I heard the rumor that the A305D uses the same
  audio/graphics drivers... Well well... off to try something I guess...

  If there is no help or ideas, I'd appreciate it.

  Hello

  The laptop seems to use the Conexant audio chip. So, you will need the right sound driver for Win XP 64 bit.
  Unfortunately, the European driver Toshiba page provides the drivers for Win XP but I don't know if the pilots would cover the OS 64 bit as well m.

  Anyway, what you need to know, is that you will need to first install the patches Ms.
  The fix KB835221 and KB888111MS must be installed before installing the audio driver.
  If you have tried to install the driver, then remove it from the Device Manager and update Windows XP first!

  AFAIK that SP3 already contains these patches then perhaps you should install SP3 first before starting with the installation of the audio driver.

• Windows XP cannot load the device driver for the CD burner. The driver may be corrupted or missing. (code39)

  I have a HP Pavilion running on XP.

  Device Manager displays the following material: A: HP CD Writer CD16b

  B: pioneer DVD - RomDVD - 116.

  Both have the dreaded yellow symbol showing that they are not working (they do not show in Windows Explorer)

  By clicking on the two points of product

  "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (code39).

  I created the 'properties' of each machine that pilots should be:

  For a. imapi.sys, redbook.sys c:\windows\system32\storprop.dll, pfc.sys and similarly for B machine.

  I copied imapi.sys, redbook.sys, and storprop.sys from another XP computer (which works well), deleted these drivers and pasted in the replacements.

  Does not cure the problem.

  Now the pilot 'pfc.sys' cannot find anywhere else. Click on the driver generates (v 2.1.0.165 Inc. - Padus ASPI Shell)

  I'm out of my depth now. No idea what is ASPi Shell.

  Help, please

  The problem is most likely the pfc.sys.

  What I would say, is to follow the steps under "Windows XP" in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

  Following steps should remove pfc.sys which may have been left to the wire after that uninstall of software associated with the readers.

  Here is some info on the pfc.sys:

  http://www.Neuber.com/TaskManager/process/PFC.sys.html

• ALT + F1: Cannot load the iommu driver

  Hello

  I need ssh access to my box of esxi. When I go in the console, I have this message that appears and cannot do anything except to return to the main screen:

  Could not load the iommu driver. VT - x, vt - d are enabled in the BIOS...

  Anyone can help to ^.

  Thank you.

  ALT + F1 type is not supported and Enter. Enter the root password.

• Satellite Pro A10 - installing the audio driver on Win XP

  I have a computer Satellite Pro A10 and the audio driver is not respected my model above.
  Please send me the audio driver and I have installed window XP
  Thank you

  I found the driver on Toshiba download page...
  http://support.toshiba-tro.de/tools/SatellitePro/spA10/win-XP/sound-SPA10-XP-512013542.zip

• C855-1GN satellite - cannot get the audio driver for Win XP

  Hello

  Can someone help me please?
  I have a Satellite C855-1GN was on windows 7, but I upgraded to XP
  I'm all fine workinjg but I can't the audio drivers for xp

  can any help please thanks tim

  Hello

  I searched and studied in internet for the possible sound chips and it seems that Satellite C855-1GN supports the audio chip Realtek ALC269Q-VB6-GR.
  Its compatible Intel High Definition Audio 1.0.

  Realtek HD audio driver should be compatible.

  By the way: two Win XP KB835221, KB888111 and patches must be installed before installing the audio driver.
  http://support.Microsoft.com/kb/888111
  http://support.Microsoft.com/kb/835221
  Then restart the laptop and try to reinstall the driver of its new

• Satellite M60: cannot install the latest driver for my graphics card

  Can not install the latest driver for my graphics card
  Satellite M60
  GRAPHICS ATI MOBILITY RADEON X 700

  Hello

  First of all I'm really putting t understand why you start two topics with the same theme. It is often better to have a subject with good content and interesting comments. Am I wrong? ;)

  Anyway, in your case, it is interesting that Toshiba use adapted drivers because of the material. This means that this graphics card is not required to run at the maximum level. Material cooling in laptops is very problematic and high temperature can cause overheating or a material damage. All hardware components are placed on a small square. Graphics card produces a lot of heat and it is not so good for other material.

  When you use graphic driver non-Toshiba card is forced to run faster. That's any use of support laptop manufacturers don t of third party drivers. The fact is that physical protection is a priority.

  I didn t do all the experiments, but according to some reports on this forum, there is how to install the driver of non-Toshiba graphics card.

  Please check this forum and you can find a lot of comments about this. An interesting topic is http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=18063&messageID=66186

• Satellite C670D - cannot install the ATI driver on Win7 installed costs

  I have a C670D and cams with Win7 Home Prem
  I have Win7 Enterprise edition and installed.

  It looks good, but the dosn´t graphics work. I have try´d the pilot in the Support section, but they didn t work.
  The site of ATI theres no driver for it.

  Maybe I just need a driver of the APU, but I can't find anything.
  Maybe someone here can help.

  Hello

  What Satellite C670D-xxx you have exactly?
  Do you have an error during the installation of the driver?
  Have you installed a Win 7 Enterprise 32 bit OS?
  The European driver Toshiba page provides only a display driver ATI for Win 7 64 bit system.

  More information would be really appreciated!

• Satellite L300D - cannot find the XP driver for the graphics card

  Hello

  I just bought a Toshiba Satellite L300D and I installed Windows XP (instead of vista, which was preinstalled). I can't find the XP driver for the graphics card... Everest recognizes him as ATI RS690M. A download link will send me straight to heaven!

  Thank you in advance,

  Nikos

  PS. of course, I searched the display on the sites of several Toshiba driver and I got this message: "the resource you are looking for has been removed, had its name changed, or is temporarily unavailable."

  After that, I tried the driver from ATI, and it seems that they are more home driver for XP.

• Satellite A200 cannot find the storage driver

  I have a laptop satellite A200 and everytime I restart the computer, it can not find the ' armazenamento driver of massa "in English, I guess it's"storage driver.

  We can I find it?

  > it can not find the ' armazenamento driver of massa "in English, I guess it's"storage driver.

  Go to the page of the Toshiba driver and download, storage manager,.

  http://EU.computers.Toshiba-Europe.c...ivers_bios.jsp