Satellite L550 - no access to the Internet after upgrading to Windows 7

Hello

After the update with the Toshiba Windows 7 upgrade offer I can't connect wirelessly to the internet.
With LAN, I can connect to the internet.
I bought a few months ago a Satellite L550 with pre installed vista 32 bit. Internet and connect to my router worked fine under Vista. But after installing the upgrade to windows 7 I can't access the internet or my router more.

I first thought the router (Siemens gigaset sx551) vice and contacted my provider, they had me send a new router (Thomson TG789vn). The router and the laptop don't see each other, the signal is very good but I can not connect.
I hope someone can help me because I don't know what to do next.

PS. excuse me for my bad English

John

Advertisement

Hi mate,

I founded similar topics that may be interesting for you:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=49617
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=49627

If you look in the forum of wireless issues you will have multiple threads. Check first, and then you can give us a feedback if it works or not now.

Good luck! :)

Tags: Toshiba

Similar Questions

  • Satellite L500 connection ok but no Internet after upgrade to Windows 7

    Hello
    I just upgraded my Satellite L500 to Windows 7 everything is fine except that I have no internet access. I have a strong connection to my wireless home network and can connect to other wireless devices to the network ok. I also tried to connect using cable, but I have the same problem - connected but no internet access.

    I ran ConfigFree utility and it does not find a problem. I ran the troubleshooter in Windows and it is unable to solve the problem but tells me that the wireless network doesn't have a valid IP configuration.

    I have reset the modem and the router, without effect.

    I checked all the drivers and BIOS are the latest versions.

    I tried to enter an IP address manually rather than get an automatically. Still no luck.

    Any ideas I can try? I hope someone can help.
    Thank you.

    Hello

    For me it sounds like that the problem is the router, and not the laptop because you wrote that with cable connected even happens on WLAN connection.

    If you go into the menu of the router, what is the status of the internet connection? Your router has a connection or not?

  • Satellite A300D-15B - Webcam does not work after upgrade to Windows 7

    My webcam does not work after upgrade to Windows 7. I installed the drivers but still having no luck

    Hey Buddy,

    What does it mean exactly when you say he won t work?
    You get an error message or only a black image? What model of laptop you have and that you use the Toshiba Windows 7 upgrade kit or a disc of Microsoft?

    At this moment I can only offers to install latest driver of the webcam of the official website of Toshiba. Make sure that this driver is released for Windows 7 and not Vista.

  • cannot access the internet after upgrading to firefox 30.0 on windows 7

    After the upgrade to firefox 30.0 on windows 7, cannot access the internet. FF 30.0 works OK under Vista

    Sometimes it's because of your security software thinking that the upgrade may not be legitimate. You can consult this article: problems connecting to websites after Firefox update.

  • Access to the Internet after Installng XP Pro content

    I recently installed a new hard drive and then installed XP Pro successfully. When I try to connect to the internet, the system says it does not recognize the modem. I use a wireless router with cable modem. Other home computers can connect to the Internet through the router. But my PC with its new hard drive and XP Pro can't. How to access Internet? Thank you.

    You may need to dl the drivers for your modem on a pc of froma thumb drive that works, and then install them on your laptop

  • Time capsule of access on the Internet (PC MAC or Windows)

    Hi, I have a Time Capsule, and I want to create a folder and be able to access from anywhere on the Internet (regardless if it's on a MAC or PC based on Windows). I read several posts and google, but still I am unable to set up the time Capsule. Can any experienced user me explained step by step?

    Thank you

    SGL

    You need to tell us a few things.

    1 do you have TC as the only router in the network.

    If this is not the case, the configuration is entirely via the main modem router combo.

    Without a public IP address on the interface wan everything that is your router, you will not be able to access it remotely. For the most part, wireless, satellite or internet shared building will not allow always remote access.

    2. double NAT will never work, so if you already have another router modem the TC must be in the bridge.

    3 Apple offers NO WAY for PC/windows remote access to the TC. Neither iOS btw... the Apple of the only method allows is AFP via a Mac.

    Local people do via SMB to TC port mapping... It is poor and does not always work.

    The tool used for iOS, filebrowser shows how this is possible.

    http://www.Stratospherix.com/support/gsw_timecapsule.php?page=6Remote


    I do not recommend this somehow... It's open ports in a way that reduces your security seriously.

    I repeat... Apple has no PC access.

    4. There is a safe way to do it... buy a vpn router and use before the TC. VPN is recognized global method for secure remote access. Who will work for any device having vpn client available... OpenVPN is the easiest in terms of cost, configuration and security.

    5. There is another method entirely, and that is to store the files you need to join in the cloud... Cloud is a better resource than to use your own router as Pseudo-nuage.

    If you eliminate the need for PC access then use BTMM for access to the TC.

    CCMM is authorized only and only the Apple method which are likely to work.

    Have you even tried yet?

    See Tesserax doco on remote access.

    https://discussions.Apple.com/docs/doc-3413

  • Compaq Presario C772TU l: I am not able to connect to internet after upgrade to Windows 10. It doesn't have the drivers LAN or WAN

    Hello
    My laptop computer with the Compaq Presario C772TU model number has no internet connectivity fade via LAN or Wifi. There are no drivers. Until now I was using windows 7 (64-bit), and it worked very well. After 10 of Windows it cannot find the drivers!

    Please help me to get the drivers. If I go to HP, they have drivers for Windows Vista, which installed but does not work only! Help, please.

    Hello:

    The ethernet card, the only suggestion I can offer would be to try the W8.1 directly from Realtek drivers.

    First driver on the list.

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=6&level=5&Conn=4&DownTypeID=3&GETDOWN=false

    Do you know what model of wireless network card your PC came with?

    The list of parts does not help me because it shows that there may be one of 3 different model wireless network cards.

    If you are unsure, please do the following so I can understand what your laptop's model card...

    Go to Device Manager.  There should be a category of other devices containing a list of devices that need drivers under this category.

    The wireless card is labeled as a network controller.

    Click the network controller device, and then click the Details tab in the upper part of the window of network controller device.

    Now you should see a drop-down list of property and it is set by default to the Description of the unit.

    On this list and select the 3rd point (Hardware ID).

    After the first string of characters you see in the window.

  • HP Media Center m1050e PC - unable to connect to the internet after upgrade from XP to Windows 7

    My desktop PC with Windows 7 will not connect internet after the transition from XP to Windows 7 Home Premium.  This necessary upgrade actually recording files and a new install of Windows 7.  When getting help from support of the router to load a new driver, I get an error message "Realtek network Contoller is not found".  They say it's a question that HP will help solve.  Can anyone help?

    You are the very welcome.

    You should be able to do.

    I think that the best thing to do would be to buy an external usb 10/100 LAN RJ-45 adapter.

    But, if you want to get an internal card, then you can get a PCI network adaper to enter one of the PCI slots available on the motherboard.

  • Lost access to the volume after upgrade 4.1

    Setup

    1 x HP c7000 blade box

    3 x HP BL460cG6 with dual Xeons 5540 and 48Gb of RAM, cards ISCSI HBA, QLogic

    3 x HP P4300 Lefthands

    4 x 3020 Cisco switches for blade in the back the c7000, 2 x dedicated to iSCSI traffic

    vSphere 4.1 Server

    The problem

    We went through the entire process of upgrading our server for vSphere 4.0 to 4.1 to manage a stand-alone ESXi 4.1 system, so our attentions turn to our 3 blades running ESXi 4.0u1 we used the built in Update Manager, downloaded the 4.0 to 4.1 upgrade file and we have improved our first blade and it did not notice problems as there put servers have was little used those.  We then upgraded the second and moved our main mail on her server.

    It was when we did that we started getting errors when people were losing connection to the exchange server, after some research we've seen of the event and we have been to see the error:

    "Lost access to the volume because of connectivity issues."  Recovery attempt is underway and the results will be available shortly"

    Then 10 seconds later we get the message:

    "Successfully restored access to the volume due to connectivity problems."

    This error only occurs on the blades of 4.1, we have restored a blade on 4.0 and errors are not displayed and no errors were reported with the servers on this blade.  As far as we can say it is not a network problem since all blades for iSCSI traffic flows on the same switches to the Lefthands, and we were losing the connection to volumes on the two Lefthands.

    We have a call connected with HP about this, but from the Yes, we cannot determine what is causing this problem and how to solve.

    So any help is greatly appricated

    Thank you

    Dave

    This is due to a combination of ESX(I) 4.1, QLogic and version Lefhand SAN/IQ 8.5 with the 10092-00 patch version. I did a blogpost on his problem:

    http://yuridejager.wordpress.com/2011/02/07/lost-access-to-volume-error-with-hp-lefthand-san-storage-after-upgrading-to-vmware-vsphere-41/. I hope this helps.

  • No internet after upgrade from Windows 7 to Vista__

    I bought a copy of the Windows 7 upgrade to Vista when I bought a Dell computer.  After loading it on my laptop, I am unable to access the internet.  I learned that some drivers are missing.  How can I solve my problem?

    Windows Update has nothing to with the upgrade of Windows. Please post your problem here instead: http://social.answers.microsoft.com/Forums/en-US/w7network/threads

    See also: http://windows.microsoft.com/en-US/Windows7/why-can-t-i-connect-to-the-internet ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Satellite A300 - Chicony webcam does not work after upgrade to windows 7

    I'm frustrated so I came here to see if anyone knows a way to help solve this problem.

    I have a Toshiba Satellite A300, which came with Windows Vista 64 - bit pre-installed. After about a year or two to have the laptop, I decided to upgrade to Windows 7 64 bit. In the process, I believe that the driver of my webcam (Chicony usb 2.0 camera) has been eliminated.

    When I go into the Device Manager in the Control Panel, the webcam is not listed; nor is "imaging devices."

    I tried to download the driver manually, but I get an error message "Webcam open fail." Restart the computer or the camera. »

    My computer has registered my webcam as 'unknown device '.

    If anyone knows how to solve this problem, please, I beg you, let me know.

    > My computer has registered my webcam as 'unknown device '.
    > I tried to download the driver manually, but I get an error message "Webcam open fail." Restart the computer or the camera. »

    This means that the the webcam driver is not installed correctly.
    Visit the page of European driver of Toshiba and install the software/driver webcam just for this model of laptop.

    If the installation fails, restart the laptop and the tent.
    This should solve the problem.

  • Have problems with the Audio after upgrade to Windows 10

    I got a free upgrade for Windows 10 option on my laptop Acer Aspire SW5-011. Everything seemed to work fine, except that I don't bother checking the audio before deleting the files Windows 8... Even if the computer thinks that the Audio drivers work very well that they are not. I have tried everything that I could find online to see if I could get any sound, but nothing has worked. I updated the drivers, kidnapped rebooted and updated the drivers, I tried to find the other acceptable drivers and other follow-up steps. "When I go to reading tab in the sound and click speakers, and then I go to the Advanced tab, the default format said, ' 16 bit, 48000 hrtz ' is grey, I can't click on it and when I try to test it says:"Cannot play testtone" It's as if something prevents me from accessing or it acts like I'm not pregnant? The speaker driver is called "Intel SSD Audio Device. The audio worked fine before downloading. Is it possible to fix my Audio, or to have access to it yet?

    Good so I had to update my post because I had to give the good news! However, that is how I am and I almost try everything and tinkering with different things. My audio works now. I went back the download Acer drivers and manual for my camera and I checked under 32-bit Windows 8, which was windows available. I installed my ID which has been deleted before when I had restarted or any number of things, I tried, and then I went in Drivers and installed the Master Installer. I made sure that I extracted all the files before proceeding with the installation. After it restarted my laptop I heard the Windows startup sound and I knew that it worked because I had no sound at all before. Not sure why it worked, but it did! I felt there was some sort of missing file or a compatibility issue, I'm just happy that the program helped master installation. http://us.acer.com/ac/en/US/content/drivers/5687;-; SW5-011 #_ga = 1.21697787.1131678756.1448199856

  • Problem with the touchpad after upgrade to Windows Vista

    After that I've upgraded to windows vista I had problem with the touchpad, that I'm not?

    Can U help me!

    Maybe when you tell us what model of laptop you have. ;)

  • Cannot connect to Internet after upgrading to Windows 7 64-bit Aspire M5100

    I upgraded from Vista Home Premium 32-bit, Windows 7 Home Premium 64-bit. I have a Marvell yukon 88E8056 PCI-E Gigabit Ethernet Controller. I tried updating the driver, but it has yet to solve the problem. I am able to connect through a usb wireless adapter.

    I noticed someone had this problem with a M3100 and the solved the problem by replacing the Ethernet card. I hope that I don't have to do since I've upgraded to Windows 7 using an OEM version. As I understand it, you can change to any material after I installed the OEM version.

    When I ran the Windows 7 Upgrade Advisor there was compatibility issues: 1) the card Ethernet, 2) graphics card.

    He said go to the device manufacturer's website and download the latest version of the driver. I thought that's what I did, but it still doesn't work. I have all the 'exclamation points"in the Device Manager. Everything said that it works correctly.

    Maybe I'm not download the appropriate driver. Should I just go for the driver and the driver update rather than choose one myself and downloading?

    If I end up installing a new Ethernet card going to work?

    Any suggestions?

    Good. It's just to install and configure the new network card. If all goes well, assuming that Murphy does not, it should be easy sailing! Let me know how it goes.

  • ProBook 450 G1: Question of Probook of video playback in G1 of the 450 after upgrade to Windows 10

    Hello.

    Issues (stop, shaking in the video and sound) are multiply video playback after upgrade Windows 8.1 for Windows 10.

    Questions for:

    -Playback (avi, mkv, mp4 etc.) VMP Movies & TV AND;

    -Playback of video from Youtube by Edge and IE11;

    -Video playback in games.

    NO problem all does to (workaround):

    -Reading of files (avi, mkv, mp4 etc) by VLC player.

    -Video playback from Youtube through Firefox.

    Not any way to workaround that emit in the games: its integrated use of resources of the browser.

    VLC uses own video codecs, so I think that this emission source is possibly in embedded Windows 10 codecs?

    Drivers:

    Intel SoftPaq Download Manager Video drivers (latest for Windows 10: technical support site the same as at HP).

    AMD drivers for Widnows 10 SoftPaq Download Manager (the same that at HP supports the site) is buggy and causes crash (the "internal power error"). If Catalyst drivers from AMD (latest from Windows 10) site.

    Additional drivers, also upgraded for Windows 10 (via the SDM for Windows-10): chipset keeps drivers, WiFi, 3D etc.

    Any ideas?

    Problem has been resolved by unistalling HD Audio drivers (installed on Windows 8.1 early HP).

    After the reboot, the drivers HD Audio was automatically installed and then updated via Windows Update.

    Video playback is now correct through no fault inside any software (IE, edge, WMP etc.).

Maybe you are looking for

  • The AV Digital adapters stop working for no reason

    I'm on my 3rd adapter in more than a year, they work for about 5-6 months and then one day I plug it to watch a movie and I get a message this device may not work properly, and that of all, no more signals no matter what I do. I have to go and buy a

  • Upgrade memory M50 satellite problems

    Hello I just tried to add 516 MB in my expansion memory slot, but the extra memory has not been recognized. Notepad starts fine, but only shows 465 MB of available space. I tried to change the original and new memory cards, and either card in a slot

  • The portfolio app does not appear on my iPad mini

    My mother got a new iPad 4 mini for Christmas and app portfolio does not appear on any of the screens.  How can I get the portfolio app to appear?

  • Blocking text Leap blackBerry?

    Is it possible to block text messages from a specific number?

  • enlarge the screen with mouse pad

    When I got to my new HP lap top, I could extend and shrink the screen by moving my finger and thumb closer and more apart on the mouse pad. Now it does not for me. I wouild like to get this feature working again. Can someone help me?