Satellite L550D I do not see the "Toshiba HDD Recovery"

Similar Questions

• Qosmio G30-161: can not see the second HDD in my computer

  Hello
  can someone tell me, that I rebooted reboot DVD in my laptop to restore all of the windows in the normal settings
  as I got when I bought the laptop.
  but for some reason when I go into my computer I do not see the 2nd HDD.

  There is only one disk c it but not the other hard drive. I need to change the settings of smoke to see the 2nd hard drive?

  Hello

  Well, the Qosmio G30-161 should be delivered with two hard drives of 60 GB.
  I guess you can see a single HARD disk due to the RAID settings.
  The unit supports RAID technology.
  I think that the RAID is on the mirror. This means that the data is duplicated on both disks.
  Generally, it should be possible to disable the RAID.
  Check the folder utilities Toshiba.

  PS: It is possible that you will lose data after changing the RAID settings. Be careful.

• Re: Satellite L550-129 does not support the Toshiba external HARD disk

  Toshiba Satellite L550-129 does not support disk Toshiba store.e canvio external hard.

  Al other portable thosiba in the family meets the canvio store.e and many former protable?

  Why do you think so?
  Drive external DRIVE is not recognized when you connect it to Satellite L550-129?

• Satellite T130 - cannot start the Toshiba HDD recovery

  Hi all, I have a problem with my Satellite T130. I have to start the drive HARD Toshiba recovery but the computer tell me that is not a valid drive HARD recovery on the PC. It's probably a fault of my father. Is there another way to start the recovery?

  Thank you

  Hey Buddy,

  How are you trying to start the HARD drive recovery process?

  The full HARD drive recovery procedure is described here, so please check this article:
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm

  If it doesn't work your only option, you use the recovery media. Did you create this such as described in the user manual?

• I do not see the second HDD on Qosmio G

  Hi all

  Yesterday I did a system recovery, but after that, I do not see my second hard drive. Every time when I started the laptop I have message about this second disk mirroring. When I bought this laptop I had two the two 60 GB hard drive and now system show me only the second local disk C there is no.

  I need to change and where to see them again the two hard drive?

  Hello

  Could you please tell us what phone you have? Thank you

  Now to your question. For me it of clear. The RAID has been configured for mirroring (RAID-1)
  If one of the HARD disk fails, the disk HARD drive can be replaced and its data reconstructed from the other HARD drive which has not failed.

  You can change the RAID settings and disable mirroring in the BIOS.
  But after changing the RAID, you will need to reinstall the entire operating system.

  PS: much useful and tip info you will find in your user manual.

• Satellite P500 - 14L - can not see the mouse when you play the game

  I use P500 - 14L, the graphics card is NVIDIA GeForce GT 330 M with CUDA technology. Unfortunately, when I play C & C 4 game, I do not yet see my mouse cursor.

  Did anyone had this problem before? How can I sort?

  Hi vincentcky,

  This only happens on C & C4 game or with other games too?

  You should look for a patch for this game. You can find it on the site of the factory.
  Additionally, make sure that the latest version of DirectX is installed.

  Last but not least, it would be interesting to know what operating system you have.

• Satellite L500-1UU - can not see the FN on Windows 7 64 bit cards

  Hello

  Although the FN buttons work, when I bought this computer firstly I was to see a Panel and watch of the operations of the forces NOUVELLES. However, now I don't see this Panel when I push the FN key. I put t know what happen and how can I solve this problem. I uninstalled vap and installed again.

  Can someone help me?

  Hello

  try to install the utility of technical support of Flashcard [drivers Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp] you can also try to restart flashcard support in the utility folder of Toshiba (go start-Toshiba utility)

  Post edited by: Jeka-HE

• Re: Question about the Toshiba HDD Recovery tool

  Hello
  Quick question: if I burn a disc of recovery using 'Toshiba recovey media creator', if it burns a picture of the current state of the computer or if it burns an image of the HARD drive restorations (means a clean image)?
  I have a recovery disk in drive D but I want a backup on dvd disc.

  Thank you!

  Hello

  Not sure, I didn't create Toshiba Recovery disk, but I think it burns an image of HARD drive recovery. But I don't know, if you use a software, Acronis true image, you can burn the image to the current state of the computer.

• HowTO: Toshiba HDD Recovery after the new installation of Windows 7

  If you install a new windows format or toshiba by a cd of windows you will not be able to see the Toshiba Hdd Recovery on F8 to restore the menu.

  Like this

  So if you have a recovery partition, you can make a recovery system to factory default. Follow these steps...

  1. format your USB key. Paste that file to a usb flash drive.

  2 - reboot the system and press F12 to start from usb...

  After these steps you can restore the system to factory default...

  Toshiba recovery steps

  Thanks for your interesting ad.
  I m very interested in how it works and will try to test it soon.

• Satellite L650-12 q - Toshiba HDD Recovery does not

  Toshiba Satellite L650-12 q
  Windows 7 64 bit

  I am looking to re - install Windows using the Toshiba HDD Recovery software on my hard drive to restore the computer to factory settings.
  I followed the procedure to do this in the System Recovery Options, but received the following message is displayed:

  "The recovery of the operating system is impossible!
  Not found the HDD Recovery folder on the second disc of the first hard drive. There is no valid disk HARD recovery environment on this computer. »

  More details:
  Before you do the above, I supported the system and the files and folders using AOMEI Backupper. I then made the mistake of the merger of C: D: and E: partitions, E: contained HDDR files.

  After having tried the recovery above and receive the above message, I reinstalled the file system I had saved on an external hard drive, which resulted in a copy of the drive C: and E: drive with HDDR files.
  Unfortunately, when I tried to recover the operating system, the same message appeared.

  Then I tried to use a system restore disc, I had created a few weeks ago, but concluded that, for some reason that CD is empty.

  The good news is that the computer still works - slowly - and HDDR files seem to be still there, but for some reason, inaccessible.

  What are my options? I want to go back to initial factory settings so that I can go back and re-install the programs and files that I want to. (I backed up all my files and have records of installation for programs).

  If the worst comes to the worst and I have to buy a Windows 7 disc (if that's even possible - I don't want Windows 8), it would be possible to install on this computer and it would give me a clean install, without any of the garbage which is currently cluttering up my computer?

  Thank you for reading, and I would be grateful for any advice you can offer.

  In your case, the situation is clear: HARD drive recovery facility does not work?
  If you want to have the laptop with the settings you have an option only: for recovery image installation you must use the installation of recovery disc.

  If I understand right you don t, entitled?
  But you can order it on https://backupmedia.toshiba.eu/landing.aspx

  If you have any other questions do not hesitate to ask.

• Vista recovery disks do not display TOSHIBA HDD Recovery option

  Back to school for 4 children with laptops is a pain, he seems to be constantly before wipe them and their establishment again.

  Any ideas why the Vista recovery disks do not display TOSHIBA HARD drive recovery option?

  I made a USB key and copied all the files from a backup of the Recvery drive to it. The USB displays the TOSHIBA HDD Recovery option but calls for the disks and will not run the recovery of the USB itself. It's annoying, but at least I can still use it to recover the machine.

  I would like to be

  the problem with discs

  or

  get the USB key to retrieve by using its own files instead of asking for the disks. Vista was not created with the option to recover from USB, so maybe I can't.

  HARD drive recovery option appears not in the advanced boot menu if something has been changed or modified on the HARD disk and the flag was removed.
  For example, this may be the case if the partition has been changed, modified or if HARD drive recovery files or folder has been changed, moved, or deleted.

  In case you want to recover the computer laptop back to factory settings, you must use the recovery disk

• Windows 8 does not see the hard drive on the Satellite A200

  Windows 8 does not see the hard drive on the A200.
  How to install it?

  S strange Windows 8 should already contain the HARD drive controller driver to recognize the HARD drive during installation.
  The HARD drive is visible in the BIOS?

  Do you use the original disc from Microsoft of Windows 8?

• Satellite A110-294 does not recognize the wireless card

  Hello

  the question is:
  Why my Satellite A110-294 does not recognize the wireless card?

  I re - install Xp PRO with all the drivers.

  I have try all the drivers Wireless: Wlan intel + proset intel atheros wlan + wlesscmgr

  I don't understand, can you help me?

  Thank you
  André

  Hello

  To my knowledge, the A110-294 uses the Atheros WLan card and therefore the Atheros Wlan dirver should be the right one.

  You can find the latest driver for Atheros WLan here:
  http://APS2.toshiba-tro.de/WLAN/

  Just a question;
  You see the local network card in Device Manager? I mean, you should see an Ethernet controller or an unknown device in the network adapters
  The driver is missing, then the device must be marked with a yellow exclamation point

• Portege A600-138 with Vista 32 bit does not see the computers in the Group Win XP network

  Hello

  My Toshiba Portege A600-138 with Vista Business 32 does not see the computers in the workgroup.
  In our office, the computers are all equipped with Windows XP.

  When I connect my laptop to the Local network, I don't see any neighboring computers in Network Explorer.
  I spent 1 hour and 40 minutes to talk to a specialist Service of Support from Microsoft, and the only way to have access to local machines, we found it had to enter the IP of the computer directly into the computer browser path field.

  I hope you understand what I mean.

  The man said that he had no this problem with non - OEM Windows Vista versions.
  He meant that the problem was with the oem versions of Vista preinstalled on laptops only.
  He said that probably the sellers - in my particular case Toshiba - supplied their notebooks with VIsta oem images that were somehow corrupt.

  Does anyone have an idea of the cause of this problem?

  > The man said that he had no this problem with non - OEM Windows Vista versions.
  > It meant that the problem was with the oem versions of Vista preinstalled on laptops only.

  That's nonsense for me
  The Vista OS preinstalled Toshiba which is same BONE as full Vista disc from Microsoft.
  There is only one difference; Toshiba laptops are preinstalled with Toshiba and pilots tools and drivers and tools are part of the Toshiba recovery image that contains Vista, driver and tools

  Check this box:
  http://www.Computerworld.com/s/article/9019179/Teach_XP_and_Vista_to_play_nice_on_networks?taxono myId = 16 & pageNumber = 1

  You will find information that a problem has to do with the new Windows Vista network map.
  Windows Vista uses a new Protocol (Link Layer Topology Discovery).
  LLTD is integrated with Windows Vista, this is why they appear correctly in the network map.
  But the problem is that LLTD is not integrated with Windows XP, which is why they do not appear correctly.

  But you can fix the problem by downloading and installing the layer topology discovery responder.
  Install it and your PC Windows XP will appear on the network map.

• Satellite L300 - where can I get the Toshiba Recovery disk?

  I have the same problem! I bought my Toshiba Satellite L300 a month ago, but the Windows Vista recovery disc was not included in the package. Y at - it an option to backup or recover the Windows operating system, just in case I need to reformat my laptop?

  Hey,.

  I read the user manual, you would know that you must create a Toshiba recovery disc yourself then please consult your user manual!

  And here you can learn more about the recovery of a laptop:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=58