Satellite L550D R815 - engraver of DVD not recognized in external programs

Similar Questions

• Re: Satellite Pro A200/PSAE7E - HD DVD not recognized

  I've demoted Biz from Vista to XP Pro. Everything works great, EXCEPT...
  the DVD/RW works well as a cd / dvd drive (writing not tested), but it will recognize all the data on the disc when an HD DVD is inserted, so not HD-DVD movies.

  And what application you are trying to use to watch movies HD-DVD Windows XP Home edition?

• DVD - RW for Satellite 2800-500: IDE1 error, disk not recognized

  Installation of a slim drive DVD - RW NEC ND6500 caused a message "Error IDE1" at startup and the drive was not recognized.
  The DVD-RW Toshiba SD - R6472 drive is not compatible with my Satellite 2800-500?
  Does anyone know a way to make someone of them work?

  [Edited by: admin on 22 July 05 17:57]

  Hello

  The problem is that all CD/DVD drives cannot work spirit all models of laptops. The problem is that there is no way to change to master or slave. AFAIK there is no public document that shows the discs and laptop computer compatibility.

  The best solution is to check if the drive is CSEL. In this case, it should work properly. If you can check please if you can find the CSEL notation on the label located on the upper side of driver s.

  Good bye

• DVD not recognized on PC Windows 7 movies

  I can't play movies DVD with my PC under W7. These DVD can be read without problem on another PC W XP. In fact these DVD are not reconnized from my PC on W7. ... It's 'official' DVD movies.

  The DVD on my PC to 7 W drive is well reconnized and there is no problem to read data CD, data DVD, or audio CD or video DVD burn on another PC or this PC... The problem is only with DVD movies.

  I check that the DVD region was correct.

  Thanks for the support.

  Thanks for the reply...

  I have W7 Home premium

  The problem is that these DVD (all DVD movies) is not reconnized at all. I tried with VLC or media player, but as these DVD are not reconnized...

  These are not 'illegal' copies or other type of material... Here's official DVD movies.

  But with data or video DVD engraved on this PC or any other PC work very well.

  Thank you.

  ===============================================
  It is possible that your DVD drive should be repaired
  or replacement.

  The following article might be worth a visit:

  (314060) your CD or DVD drive is missing
  or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/314060
  (Windows XP / Vista / 7)

• Satellite A200 PSAF6A - HARD drive is not recognized. No recovery of product

  The drive HARD in my Toshiba Satellite A200 PSAF6A-0US01N is not recognized in the machine or any other computer, so I can't run any windows/toshiba repair.

  I know that readers have a factory reset hidden on the disc and press 0 to the power upward, but with the unreadable disk, how can I repair my installation of Windows Vista?

  Hello

  If the HARD drive is not recognized by the BIOS or other laptops, then I would say that your HARD drive is defective.
  In this case, you need to replace the HARD drive.
  In this case, you will not be able to start the recovery procedure from the HARD drive because it works badly as he has already said

  Are you from the Australia? If you need a recovery disk, I recommend contacting the local Toshiba ASP to get this drive

• Satellite L550D-10J: wireless network does not work in Windows 7 drivers?

  I upgraded my Satellite L550D-10J to Windows 7, but can not get my wireless to work. I can't find the drivers for wireless LAN. I assumed that "network controller" is related to the network wireless but don't not find drivers for it to be.

  Solutions or suggestions?

  Hi mate,

  Theoretically, network controller can mean both WLAN or LAN card.

  Anyway, if you need driver WLAN, you can visit the Toshiba WLAN portal. There, you can always get the latest WLAN drivers:
  http://APS2.toshiba-tro.de/WLAN/

  As far as I know Satellite L550D has Realtek WLAN card.

  Welcome them

• Satellite P300 PSPC4E - new battery is not recognized by the operating system

  Hello

  I bought a new battery and it is not recognized by the system
  Satellite p300-PSPC4 win7

  drivers ok
  OK magazine

  The battery is always fully recognized and fully supported. I tried several methods to try to load but nothing happens

  the battery icon is present

  Thank you

  Hello

  Because your old battery is always recognized, I think you bought the battery is not compatible.

  That's why you should buy a compatible battery recommended by Toshiba.
  I think you can buy this Toshiba ASP.

  Welcome them

• DVD not recognized by Windows

  DVD format

  I was not concerned about the codecs and such because I own a DVD player and do not need to play DVDs on my computer.  But now I have some records of EA games in DVD format and XP don't recognize I have a disc in the drive.  The Microsoft Download for codecs is useless.  How to fix XP to recognize ACCESS AND a computer on DVD drive?

  Hi MelFletcher,

  ·         You see the DVD drive in Windows Explorer?

  ·         Have you tried to play other DVDs?

  ·         You can fine CD?

  Follow this link and see if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

• /AR cd/DVD not recognized by windows

  yesterday, I posted on the forums aboutmy cd/dvd does not read the disc, windows don't recognize it and says its an unidentified device, I used fix - it nothing works. Indeed, it is frustrating... help, thanks james

  Hello

  Make sure that the drive works - / settings (BIOS/CMOS) often F2 so watch the screen
  as you start - together on CD/DVD boot order - save. Put in a Windows or other boot disk and
  see if the drive works. Be sure to set the boot order to the harddrive when finished.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• DVD not recognized writers more - please help!

  I have a Dell Studio 1555 laptop that came with a DVD - RW drive. A year ago, my husband did a single DVD for a few friends, using the Windows DVD Maker program. It worked!

  Unfortunately, it worked only once. The next time we tried, the DVD - RW drive seems not be recognized at all - not by any program or by Windows at all. I searched online and read about the removal of the upper and lower filters in the registry. I did: still the drive is not recognized.

  I tried the thing Microsoft Fix It, but it does not recognize the drive as a writer.

  I bought a new external DVD burner and repeated the above. It is not recognized as a USB storage device.

  I ran the auditor system files, and after some difficulties to find it, check for errors in the CBS. This is the entry:

  000001ab [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2011-02-12 16:52:31, 000001ad CSI Info [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2011-02-12 16:52:31, 000001ae CSI Info [SR] this element is referenced by [l:160 {80}] "' Package_30_for_KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18000.936330 - 187_neutral_GDR" "
  2011-02-12 16:52:31, 000001 b 1 CSI Info [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:20{10}]"TCPMon.ini '; source file in the store is also corrupted

  Sorry to put all this gibberish in. It means nothing to me. I don't know if this is relevant at all.

  Can someone help me write a dvd again? I don't really understand computers, but it seems obvious that the problem must be with Windows.

  Thanks in advance!

  Hello

  Did you check with the manufacturer of your system, the manufacturer of the drive and ask in the Mycelial forums?

  If you tried the whole store then try an in Place upgrade/repair facility that
  allows you to keep the programs and data, even if redundant backups are always a good
  idea. (If you have not used the methods in the troubleshooter so it is less likely to help him as)
  the same incorrect settings will be always present).

  You can try a repair install or an upgrade in Place.

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Windows 7 Installation DVD not recognized.

  I'm trying to install Windows 7 on a new PC - no previous operating system. Hard drive is a Western Digital WD800 IDE. CD/DVD is a Sony CRX230ED. The CD/DVD recognizes CDs very well. But I put the Windows 7 DVD in there and it is not recognized.

  CRX230ED's rider to master. BIOS has CRX230ED at the first position in the boot order.

  Tried to start at Bart PE. that works because it loads a CD and not DVD. But I can't start Windows 7 installation because she needs to start in a Windows environment.

  Going nuts.

  This CD player is. You need a combination player that can play CDs and DVDs. If it is a new computer that someone built for you, take because they rip you off. Nobody in his right mind would put a plain CD - RW disc in a computer today. If you compiled yourself computer parts you hang out, pull the reader and the pitch. Replace it with a CD/DVD-RW drive instead. MS - MVP - Elephant Boy computers - don't panic!

• Burner DVD not recognized computer Gateway 2750 laptop under Vista

  I have a DVD burner and my computer recognizes that the CD burner, I try to update the drivers but it doesn't show any DVD material. __

  I have a laptop gateway 2750 running Vista Home Prem and I a bicoeur precessor.  My computer only recognizes the CD-ROM drive and does not see the same DVD at all.  I tried updating my drivers but it won't allow me to add a DVD driver. Help

  Hello

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  Check with the support of the door of entry for firmware updates and known issues.

  ===========================================

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• DVD not recognized

  When I insert a dvd, the dvd is not recognized and I wonder ' to install a dvd or disk etc.

  Hi David,

  Thanks for the quick response.

  Have you tried the steps in the article mentioned above? If so, what was the result?

  In addition to the above step, try to install latest drivers from the link below and see if it helps you to solve the problem. If the problem persists, try to update the drivers from the manufacturer's website.

  Updated a hardware driver that is not working properly

  Keep us.

  Kind regards

• DVD not recognized in windows 8

  OK, so there was a whole thread on it before - but seems to have now!

  Problem: Installing W8 - but now both my PATA Sony DVD discs and player light on Blu - Ray are not recognized in W8. They show as an error in the Device Manager.
  I tried the registry fix as in the old thread: http://answers.microsoft.com/en-us/windows/forum/hardware/dvd-drive-not-recognized-in-windows-8/ad546c20-b916-4ad5-9858-52e10610ee14 - but, although he said that he managed, my records always show in error in Device Manager.
  Will welcome any suggestions!

  You are welcome. Glad that worked.

  There are instructions in the section 'Option three' in the following link to see and read the results of the SFC:

  http://www.eightforums.com/tutorials/3047-sfc-scannow-command-run-Windows-8-a.html

• Satellite L500 - second module of memory not recognized

  Have installed 2 GB Offtek extra memory in 2nd slot of memory, but it is not recognized by the system--still show only 2 GB installed memory.

  What is the problem?

  Hey,.

  I've never heard of RAM modules Offtek

  From my own experience, I can say that work really well Kingston memory module and never had a problem with them, they are of high quality modules.

  In my opinion, you should try a different RAM module. Maybe it s is not compatible, so it will not be recognized that s my personal opinion.