Satellite L555-10R - support quad-core processors?

Similar Questions

• Qosmio F50-126 does support Quad Core processor

  I have a simple question:
  Is my image of Qosmio F50 - 126 support processor and HOW?
  Can I still use it.

  For 3 months of use of this fantastic machine, I never found an option for up-conversion.

  The only thing I've seen is in the program and function indicating the image processor driver.
  I HAVE NO IDEA HOW TO USE IT!

  Hello

  The Toshiba Quad Core HD processor (I think you meant this) is not supported by the Qosmio F50-126.
  I don't find it here:
  http://EU.computers.Toshiba-Europe.com/innovation/JSP/SUPPORTSECTION/discontinuedProductPage.do?service=EU&com.broadvis ion.session.new = Yes & PRODUCT_ID = 1061504

  If you want to know what models Qosmio F50 would support the Toshiba Quad Core HD processor then you can check this here:

  http://EU.computers.Toshiba-Europe.com-> Products-> Qosmio-> F50 series

• Upgrading RAM on Satellite L555-10R

  Hello

  I have a satellite L555-10R, Win 7 64 bit, main Board TOSHIBA KTWAA Intel GM45/GM47 chipset, 1.9 BIOS, CPU Intel COre 2 duo P7450;

  I want to upgrade ram 2x2gb (SAMSUNG) to 2 x 4 GB (CORSAIR). Only the ram that I put in the location #1 is recognized as a result system starts and detects 6 GB of RAM. When I put the RAM 2nd Slot #2, the PC does not start. It seems that it does not detects hard (the LED on the front of the PC don't not ligth during startup). I can't go into the BIOS (even if I press the F2 key), black screen, all I can do is power off.

  I'd appreciate your help, if you have an idea.
  Thank you

  VLM

  Hello

  First some general information on your machine:
  Your laptop can be upgraded to the top 8 GB and max upgrade, you can use both modules of memory of 4 GB.
  Compatible 4 for GB DDR3 - 1066 MHz apart number PA3677U-1M4G. Module of memory with this part number is tested and 100% compatible with your device.

  If you check this forum you will find number of threads as your one, where people try to level of RAM using Rams Corsair and spoke of the same problems. Obviously the reason for non-working machine is compatibility issue with these RAM modules.

  The 'value' Modules of RAM use many markets good chips using several banks/channels, which can cause problems of compatibility with some chipsets/CPUS.

  I highly recommend to use high quality and 100% compatible modules of RAM from Toshiba or Kingston.

• 13 Firefox works in multithreaded mode and it can use the quad-core processors?

  When you buy a new PC, we choose between dual core vs quad core processors, and some people claim that Firefox work mode multithreaded mulch and treats each tab in a separate process and may fully use the advantage of a quad-core processor. Is this true?

  Firefox does not treat each tab in a separate process. If this can be a function in the future, I don't know of any plans to introduce any time soon. Obviously, buying a quad core processor will be significantly faster than a dual core, and your browser is usually less consume a lot of resources than other programs. I would not use it as your buying decision. Firefox will work just as well on a dual-core or a quad-core, but windows and other programs will work better with 4 cores.

• Satellite L555-10R - Reeltime ceased to record my activity

  Hello.

  Ive got a new Satellite L555-10r, had it for 2 days.

  After you install Adobe CS3 master collection, I didn't notice that half of the programs were installed and ran the installation a second time and those missing were included ok the second time around. Then, I got the error message that Reeltime was not working properly and he could tell me if she could solve the problem.

  Then I got a similar error message when opening Microsoft Works. Reeltime ceased to record my activity, so I downloaded the program from the site Toshibas, uninstalled and reinstalled it. It seems the record activity now ok for applications e.g. photoshop, word etc but not for www pages read in explorer, firefox or chrome, despite small icons for these browsers listed within reeltime.

  IM wondering if something has got corrupted and I should reinstall the operating system and start again using F8 like I'm still in the early stages to up my laptop and running and must still transfer data or install other programs.

  How long is the F8 reinstall, it's just Windows 7 or this will provide all the software factory too like Toshiba and Mcaffeee?
  Either by the way, I had removed Mcaffeee using their kidnapping special .exe before installing adobe cs3.

  I hope you can answer my question, thank you for your help.
  Christopher

  > How long is the F8 reinstall, it's just Windows 7 or this will provide all the software factory too like Toshiba and Mcaffeee?
  > Either by the way, I had removed Mcaffeee using their kidnapping special .exe before installing adobe cs3.

  The HARD drive recovery process which can be started by using the F8 key-> fix my computer-> drive HARD recovery should not take much time.
  The installation of the image should run without problem.

  The point is that you won't need to install the drivers and tools using the Toshiba recovery. This process restores the phone to factory settings simply says that you will get the same status as on the first day of purchase

• I want to buy Satellite L555-10R

  Hi guys,.

  I really want this laptop but I can not find anywhere. No one knows when it will be available again?
  Or when it will be available on this site?

  Thank you.

  Hello

  Toshiba products are specific products of these countries and, as I can see on Google, Satellite L555-10R is offered in the United Kingdom and France.
  I don't know where you want to live but this laptop has specific hardware platform and belongs to PSLW8E models.

  Where you want to buy? Maybe UK?

• Quad Core processors

  If my server ESXi has a Quad core processor - y at - it all improvenent of performance that can be achieved specifically chosen to assign 4 processors to a Server 2003 VM or if I just leave it to 1 core, ESXi will use all four cores to my best advantage?

  Does make a difference?

  best practice is to always start with 1vCPU and work your way to the top.  You can usually find 1vCPU will be enough.  From there, you would go to to 2vCPU.  I don't think that 4 is a good idea.

• Quad Core Processor, VT not supported on one of the four cores

  I've had a look around forums and couldn't find anyone else having this problem.

  I built a machine based on a chip Quad Core Q9400, 2 GB of memory and an Intel G41 motherboard

  I installed CentoS 5.3 and vmware server 2.0 yesterday turned on VT in the BIOS and everything was fine, I installed a copy of windows server 2003 x 64.

  This morning, I upgraded the memory to 8 GB, 800 MHz, and when I rebooted, my server have complained that the chip did not support 64-bit.

  Starting with the vt.iso shows all 4 cores, but reads as follows

  Core 0: this core does not support the VT

  Base 1: VT is enabled on this core

  Core 2: VT is enabled on this core

  Base 3: VT is enabled on this core

  Someone has ideas have VT can not be supported on a carrot? I tried to reset the BIOS, but the previous 2 GB of memory, reinstalling the processor, nothing worked

  This sounds like it might be erratum Intel AV69 (http://download.intel.com/design/processor/specupdt/318727.pdf).  Have you checked the BIOS updates?

• CPUID (1) do not return don't not every bit of functionality on the new Xeon Quad-core processors?

  I use VMWare Player 3.0.1 build 227600 and have noticed the same problem on Windows xp and RedHat Linux images a quad-core Xeon. A colleague has seen the same problem using Fusion as well.

  On the host operating system (Mac / Windows / Linux) I am getting the output of the CPUID (1) next:

  CPUID (1): eax = 0x000106a5 ebx = 00100800 ecx = 0x009ce3bd edx = 0xbfebfbff x 0

  Present exactly the same code within an operating system invited to VMWare Player:

  CPUID (1): eax = 0x000106a5 ebx = 04100800 ecx = 0 x 00980201 edx = 0x0febfbff x 0

  Futher code in the library specifically to care little 28 in the edx register, which is located on processors that support hyperthreading or multiple cores (and as we know, the new Xeons support both). My images VMWare configured to run at 2 or 4 processors, but identification CPUID code does NOT see EDX bit 28 as being fixed. Example code for the multi-CPU identification of Intel assumes this bit is defined for topology CPU counts as well. (I won't go into the other differences in ebx, ecx and edx).

  The same test code running on a Core 2 Duo on the host operating system product:

  CPUID (1): eax = 0x000006f6 ebx = 01020800 ecx = 0x0000e3bd edx = 0xbfebfbff x 0

  Operating exactly the same code in a guest OS in VMWare player on the Intel Core 2 Duo (same image VMWare):

  CPUID (1): eax = 0x000006f6 ebx = 00020800 ecx = 0x0000e3bd edx = 0xbfebfbff x 0

  As far as I know, the only variable here is the CPU. The code that runs directly in a welcome what OS behaves properly on the Xeon Quad-core and Core 2 Duo, so the problem seems to be somewhere in VMWare Player.

  From what I saw, there were several problems Xeon in VMWare for a while - maybe it's just another one of them.

  Has anyone other saw this and have a reasonable and safe solution to correctly detect the core CPU / cache topology if VMWare is the mixture?

  If you run your guests with binary translation, we are unable to intercept CPUID executed at CPL3, because that code runs in direct execution.  Under the binary translation, that we can only intercept CPL0 CPUID instructions that we translate.  The title of the material assistance to virtualization, intercept us all the instructions of CPUID, regardless the privilege level.  I suppose you issue CPUID from user code at CPL3.  You should be able to play with the privileged execution mode and see the effects of translation binary vs VT - x.

  Under translation binary, if you "clear acceleration", that we can intercept all the instructions of CPUID, because then everything is translated.

• Satellite L555-10R: Question about using an external monitor with 1920 x 1200

  Hello

  I have this toshiba laptop: L555-10R

  I want to buy a screen external 24 "to use for CAD

  Please can you tell me, my graphics card composed with run at 1920 x 1200 monitor, and a second screen 1600 x 900 at the same time see my cell phone?

  I really want the 1200 vertical height of the external display for CAD work such as size of the screen vertically made a big difference.

  If not, is there anything I can do about it to update the graphics card from the laptop?

  If not, can you suggest a new laptop that would support this? I am looking for excellent performance for rendering using 3DS Max, autocad, sketchup, etc.

  Thanks in advance
  Christopher

  > Please can you tell me, my graphics card composed with run at 1920 x 1200 monitor, and a second screen 1600 x 900 at the same time see my cell phone?

  I think that this should not be a big problem
  The graphics chip is expected to provide support for 1920 x 1200.
  The question is whether the graphics card driver contains such special resolution of 1920 x 1200

  However, you can certainly choose two different resolutions for the screen internal and external monitor.

• Qosmio X 300 - 13O does support quad-core?

  Well title says it all; does the X 300 - 13O support quad and is it possible to upgrade the processor?

  Found this processor that uses the same socket as the current CPU.
  http://bit.LY/iqVZim (I know it's QS)

  Concerning
  Alex

  Of way General Toshiba doesn't supports any CPU upgrade or any exchange best way to get the info on it is to contact the nearest Toshiba service provider. They have access to the database of Toshiba and can check this and also send the request for Toshiba technicians.
  By the way: http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm

• Is temp CPU to 131-140 iron an AMD Athlon II X 4 620 2.6 GHz Quad - Core Processor normal or high?

  I have just instlalled an AMD Athlon II X 4 620 2.6 GHz Quad - Core (ADX620WFK42GI) instead of my 2 215 dual core athlon processor and my temporary hoovers around iron 131-140. is this normal operating temp?   Cause now my CPU fan turns up every 5 minutes for about 5 min and it never ran full front

  As tetraethyle3 says, if you use the one provided with the dual core cpu, it can
  be insufficient. Dual-core coolers are similar, but not the same thing.
  However, you may have gotten the paste application heat badly too.
  There are tutorials of application of thermal paste on the i-net.

  Try a Coolermaster EVO Hyper 212.
  They are well regarded as a good value for the effective cooler money. You have to
  remove the motherboard to mount, unless you have a case with a hole in the motherboard tray to allow replacement of cooler.

  All three AMD I've used for the Athlon 64 came out slowed in the bass
  40 c in summer, but my Phenom 965 now stands at 35 ° C (temperature of 22 c air).
  In the summer with temperatures of air between 28-32 + C it will hit 60-65 ° C under full load.
  The stock AMD cooler also kept the 965 at similar times, but unlike my previous
  AMD coolers the fan was loud, so I installed a Noctua U9 with fan only.

  .

• Satellite L555-10R connect with TV

  Hello

  Should what kind of cable I connect my laptop with TV?

  Hello

  satellite L555 specifications, it is equipped with an Hdmi output. If you have an Hdmi output on your TV, you can connect using an Hdmi cable

• 2nd hard drive install on pavilion dv7-3060us 17.3 inches with Quad core processor

  Pavilion dv7-3060us computer has a 2nd hard drive Bay.  On 2 flags of 17.3 inches previous, I installed a 2nd HDD.  This quad core Pavilion is much thinner than the previous pavilions;  the underside of the computer has also a centre piece in the form of "T" in the Panel without screw - is a pop on the access panel or the entire bottom panel needs to be removed through the perimeter screws?  Still trying to find a manual showing this particular case - no luck so far.  The downloaded HP

  Manual for the previous dv-7 is for the case of style like unless I missed something.

  Install an SSD soon - would like to have all the "stuff" to install a 2nd drive hard if possible.  Anything I should be aware of before perform this procedure?  Don't really want to remove all the merits of the case.

  Thanks for any help that can be provided.

  klppap

  DP - K

  I appreciate the help.  The Caddy is the same that I used before (on the 1st dv7) the 2nd dv7 used the direct taking of 90 degrees into the adapter.  I have both of these me more allotted a 500 GB HD.  All I need pickup is the SSD.

  The "T" sign on the back of my case has no screws - but I can see the 3 component tabs snap at the top of the "T" through the small crack on the case.  These are shown on the exploded view of repair.  I'm projecting from the 'snap-out' Panel down on the vertical leg of the "T".

  Once again; Thank you

  klppap

• Satellite L555-10R - wireless connection is very "unstable".

  Hello to you all!

  Something went wrong, and my last point of backup recovery does not resolve the issue.
  I miss the "Service of auto-configuration" in Windows 7 / 32 b for Wireless Card (i.e. SE TL8191 Realtek)

  Simple example: I have Lan connections and working together for example, wireless and wireless is very "unstable".

  Just one request: technically possible to correct or better to buy the original Windows 32/64 on Toshiba media? (which has not been delivered with my laptop purchase).

  Thousand thanks
  Thank you!
  Thomas

  Ooooops... by the way Happy New Year 2011 from Paris!

  Post edited by: Thomas

  Hello

  The laptop supports the 802.11bgn of Realtek RTL8191SE minicards.
  I've read here in this forum that the WLan driver from Realtek page should contribute to improve the performance of WLan.

  In addition, you must check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=58638

  User AndreaEoF posted the Nice details how improve the WLan conectivity... you need to disable the economy for WLan in the management of power supply...