Satellite L555-110 - cannot install the Eco on Windows 7 utility

Hey everybody,

I can't install the utility on Windows 7 Professional 64 bit Eco. After loading the files, the installation routine stops and says no "supported BIOS". I use the latest version of the Eco (v1.1.11.64) and BIOS (v1.70) utility.
Additionally PC Health Monitor does not work too. Setup concludes with '' don't support. ''.

Any idea?

Thank you in advance.

Robert

Hello

You have installed all drivers for the laptop again or can you notice any yellow exclamation in Device Manager?

I checked the Toshiba page and normally this laptop supports the Eco utility.
Eco Utility works on the factory settings? I mean the version preinstalled Windows or you have only this question on the current version of Windows 7?

Tags: Toshiba

Similar Questions

  • Satellite L555-S7008 - cannot install the display driver Windows 7

    Hi guys

    I'm confused now
    I have a Satellite L555-S7008, I installed a Windows 7 ultimate edition, but unfortunately the display driver did not work. Now I have pain in my eys because of the resolution. What should I do to make it work?

    Hardware found "Mobile Intel (r) 4 Series Express Chipset Family", but it does not support this type of material

    (2) what driver should I I installed to the PCI network communication controller?

    Hi ROCO_1,

    I had a similar problem with the display driver I t could not install it. I put t know why it happened, but the solution is that you need to install the display driver through the Device Manager and not from the configuration file

    So go into Device Manager and right-click on the graphics card and select put to update driver. Do not choose the Advanced installation where you can choose the driver directory yourself. Select the files that you have unpacked the file downloaded and that s all.

    About the communication network PCI controller, it could be both: WLAN or LAN card. So, make sure that the two drivers are installed.

  • In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and the second time error code 8007000D

    In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and error code 8007000D twice. How can you help me solve this problem

    0X8007000D ERROR_INVALID_DATA

    Try to manually download the update and installation
    http://www.Microsoft.com/downloads/en/results.aspx?FREETEXT=KB972145&displaylang=en&sType=s_basic

    It will not appear in your history after a manual installation, but it will show the updates installed in view area. TaurArian [MVP] 2005-2010 - Update Services

  • Satellite Z830 - cannot install the Eco utility because of the wrong version of the OS

    I installed Windows 8 from the original CD (not an update) and installed many pilots. When I try to install the Eco utility, it goes all the way to the end but then tell me that the operating system is not supported with load (translated) and cancel the installation.

    What can I do?

    Concerning
    Benny

    NB: Satellite Z830 and this is the version Win8 Eco Util (eco-20121126101818)

    Can you please post exact model laptop (Z830-xxx)?
    I just want to check if Win8 drivers are available for your laptop satellite.

    http://EU.computers.Toshiba-Europe.com/innovation/windows8_drivers.jsp

  • Cannot install the printer and windows update error 80070026

    Original title: Registry Editor not work cannot install the printer

    I have Vista the operating system on a Dell laptop with a Core 2 duo, map of Nivea.  Norton Antivirus now after it has started.

    Tried to install the dell printer after uninstalling all printers.   I scan my system using promp... sfc/scannow then I got windows results resource protection found corrupt files but was unable to fix some of the them.details are included in convertible bonds. Journal windir/logs/CBS/CBS.log
    for example:C:/windows/log/cbs/cbs.log

    I looked in the directory C find regedit.exe to rename, but was unable to find it.   I found these if this can help.

    Regedit.exe.4288.dmp
    Regedit.exe.3280.dmp
    Regedit.exe.2292.dmp

    I also got error or popup that without running windows Explorer and then restart it.   I can't install the printer as it pops up and I need to close the program.

    also receive error installer that it is already running
    install GUI is unresponsive

    error code 80070026 during the installation of windows updates.  I open without addons and updates are all to date.

    I'm sorry that there is so much information and error codes.  I think that all what concerns the corrupted files.   Can you help solve c drive please.

    Hello

    1. What is the serial number and model of the printer?
    2. What are the failed updates?
    3 have there been any changes made on the computer before the show?

    I suggest you try the steps to solve the problem with the installation of printer.

    Method 1:
    Run the Fixit and check if it helps.

    Hardware devices do not work or are not detected in Windows
    http://support.Microsoft.com/mats/hardware_device_problems/en-us

    For more information, see the links:
    Find and install printer drivers
    http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers
    Search for a printer, the manufacturer Web site
    http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website
    Add or remove a printer
    http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

    I suggest you try the steps to fix the problem with Windows Update.

    Method 2:
    Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.
    http://support.Microsoft.com/kb/929135

    Note: After completing the steps in the clean boot troubleshooting, follow step 7 link to return the computer to a Normal startup mode.

    Method 3:
    Temporarily disable the security software.
    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

    Method 4:
    You can also manually install updates (KB number) by downloading from the Microsoft Download Center.
    http://www.Microsoft.com/downloads/en/default.aspx

    For more information, please see the links.

    Problems with installing updates
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
    You cannot install some programs or updates
    http://support.Microsoft.com/kb/822798

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
    322756 (http://support.microsoft.com/kb/322756/)
    How to back up and restore the registry in Windows

    Warning: An upgrade on the spot is the final solution before you have to reinstall the operating system. Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process

    Hope this information is useful.

  • Cannot install the update for Windows vista (KB2718704) a safe mode or after clean window reboot

    I can't install the update for Windows vista (KB2718704), a mode without failure or after clean window reboot.

    What should I do?

    Hello

    ·         Did you do changes on the computer before the show?

    ·         You get the error message?

    ·         You are able to install other updates successfully?

    Follow these methods.

    Method 1: Temporarily disable the security software .

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

    Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

    http://www.Microsoft.com/downloads/en/default.aspx

    Method 4: Follow the steps in the article.

    How to reset the Windows Update components?

    You cannot install some programs or updates

    Note: You must take the backup of the data before performing any installation of windows.

  • Cannot install the C4680 with windows XP-

    I recently bought a C4680 with the intention of using it as a wireless printer connected in conjunction with a Linksys print server. Currently, I do this now with three PC and another HP printer.

    I have a laptop with Vista Home, another laptop with XP s/p3 and a desktop with XP s/p3.

    With the Vista PC installation was quick and easy. However, when installing on both machines XP, installed on the ground to stop when you try to install the drivers after the connection of the USB cable. The two printing support, and mass storage facilities returned a "cannot complete this installation - driver is not digitally signed.

    I spent four hours on the phone with HP support before they admitted that they could not do work on the XP laptop.

    What I will meet the same exact errors when I try to install on the XP desktop.

    My question: is there someone out there who has successfully installed the C4680 with Windows XP?

    Large. Glad to know that it worked.

    I ask you to mark my post as the Solution so other users with the same issue can benefit from this thread.

  • Satellite M60-176: cannot install the graphics driver

    Greetings,
    I'm trying to reinstall the original driver from Toshiba site
    on a satellite M60-176 disabled ATI X 700 256 MB dedicated

    version is:
    Driver VGA (ATI M24C/M26P)
    V8.121.050322a - 021880C
    Driver VGA (ATI M24C/M26P)

    The error message occurs when I install the software: Setup copy dll, install some components and stop at the installation of the driver slide with message (translation from the french) "Setup was unable to complete the installation, try to configure your graphics card with vga standard it before running the Setup program.

    When I try to detect the card with control panel and chose the file CX_21880.inf in 2KXP_INF, the process copy the dll, but in the end complains that "a problem in installing Radeon X 700' and then the error is"ACCESS DENIED"

    I tried to follow the sequence as:
    uninstall all remove them, go in safe mode, video card (I can't put a good VGA card)

    I ' v tried a driver (Driver Cleaner pro) removal tool then restart XP and then try to reinstall the driver of toshiba original ATI: same problem

    TOSHIBA support put me to BIOS 1.60 level: same problem

    I cannot conclude that this original toshiba video driver cannot be installed on a toshiba...

    Actually I'm under standard with vga display 1152 x 864 32 bit colors with slow rendering

    I'm really ask for help, because I do not know how...
    Kind regards
    Ludovic

    Hello

    What happens if you install the operating system from the Toshiba Recovery CD?
    This CD also contains the ATI graphics driver.
    How about installation of the graphics driver on the site omegadrivers.net?

    But I must say that it is very strange question. The driver from the Toshiba site should work.

  • Satellite Pro L500 - cannot install the Realtek LAN driver

    Hi all

    I got a Satellite Pro L500 Windows 7 pro with disk created from computers, cell phones, but now cannot install a Realtek LAN driver for the laptop.

    The installation of the driver software program doesn't seem to work properly all the time, tried several times to install with only once a realtek 'repair' option becomes available.
    When I managed to install the driver I got an error "the device couldn't start. After restoring I also had problems with a "controller driver simple communication PCL.
    which seems to have been an Intel MEI according to the SAT, DEV info displayed in the information systems.

    If these problems are linked and how to install the driver required in an automated system if the system does not correctly detects hardware?

    Hello

    I m not owner of the Satellite Pro L500 but have you ever tried to install the latest driver Realtek LAN official site of Toshiba?

    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    Check this box!

  • Satellite A660-07U - cannot install the new display driver

    When I got to my laptop, it wouldn't even start the box! So I googled how to get operational and it wouldn't install Windows 7 32 bit, so I installed Windows 7 64 bit and that worked.

    I am one of the users who is also having their laptop freeze on them at all times. I did the update to the Bios and it always does. So I decided to try to update the graphics drivers with new ones on this site, but it seems that they won't install. I got 64-bit drivers for Windows 7 first, I have Windows 7 64 bit installed in my laptop. But it cannot find the necessary material, I thought, he says its because my laptop is not a 3D version, should even elsewhere?

    So then I tried the 32 bit drivers and it says im using the wrong system operating system for these drivers.

    How about if some drivers I can use?

    Hello

    A moment I really t understand: why you have your own version of Windows 7?
    Usually by Satellite A660 is always equipped with operating system (Windows 7) and it s already preinstalled. This means that you can start your computer laptop out of the box and Windows 7 will begin. Therefore, you don't need an additional installation.
    And let me guess: you don t have created a right Toshiba Recovery disk?

    In any case, before update you the display driver you must remove the older version first. Then, restart your computer and install the latest version.

  • Satellite A50-109: cannot install the latest driver for card ghraphic

    Hello

    When I want to install the new driver for graphic card on my satellite A50-109 and error will be displayed:
    THIS DRIVER CANNOT INSTALL ON THIS COMPUTER,
    Please help me
    my graphics card: Intel 82852/82855 GM/graphics controller GME

    Please help me

    Hi Milad,
    Did you get the new driver from the web site of Toshiba or others.

    The graphics card in your laptop is not necessarily compatible with the latest drivers from the manufacturer, simply because it is specially designed for your laptop. Usually only the drivers supplied by Toshiba works correctly.

    HTH

  • Satellite L655-145 cannot install the bluetooth stack

    Cannot install bluetooth stack. Just Setup freeze. All other drivers installed successfully. Device Manager only show Bluetooth ACPI device. This problem appeared after the update of the BIOS of the original version 1.80 to more older (1.80-1.90-2.10-2.20 > > >). Downgrade from 1.80 take no effect.

    PS. Sorry for my bad English.

    Hello

    As far as I know the laptop is equipped with WIFI and Bluetooth combo card!
    This means that Wlan and BT functionality is controlled by a single card.

    If you BIOS outsider (don t know why) Please put failing first.
    Save the changes and reboot the laptop.

    Then download the BT BT Toshiba stack.
    Activate BT (FN + F8), then launch the installation of battery BT once more.

  • Satellite P755-103 - cannot install the package of added value

    Hello

    I recently bought a Satellite P755-103. In order to maintain the updated drivers, I downloaded Toshiba Value Package added to the downloads section of the page Web of Toshiba. (2 times, I'm sure that the driver is for my 64-bit version of Windows 7).
    When I tried to install it, I got the repair and the options remove. Repair gave me this error: RegDBGetItem failed (1). So I removed completely the driver so that I can install it again. During the installation of the driver that I got the same error, so I couldn't install it, so now I'm unable to activate the shortcut keys PVAT gives me access.

    If anyone knows something that might help with this problem please say something, it would be very apreciated.
    Sorry for my English.

    Thank you

    Hello

    Value added package is still listed in the list of Windows software? If so, I would recommend removing it. Then restart your computer and try to reinstall the VAP.

    If it doesn t work I would try CCleaner. That is a nice freeware tool to clean the registry. You can find the tool using Google. Just run the registry cleaner and then you should be able to install VAP.

    Generally speaking, it s is not necessary to update the drivers if everything is ok. If you n t have any problems you can forget about these updates. ;)

  • Satellite A210-183: cannot install the Realtek RTL8187B WLAN XP

    Hello

    I downloaded from the download section of Toshiba, the pilot: RTL8187B_5_6.1135.0625.2008_Silent_Install, but when I try to run the installer, I get the installation program has encountered a problem...

    When I try to manually install the driver from the Device Manager I get the message; driver is not appropriate for this material: "the specified location does not contain ifo on your hardware.

    What can I do?

    Hello

    I don't know about you, but maybe it has something to do with the order of poor facilities. The order of good facilities for this Satellite model is as follows:

    WINDOWS XP HOME SP2
    ATi Display Driver V8.401 - m 070815-052613C
    CardBus Controll Driver Memory Stick 6.0.1.10 Reader /Card
    Synaptics TouchPad Driver V10.0.11.1
    Realtek Audio Driver
    TOSHIBA software modem
    Realtek LAN Driver V5.674.807.2007 cable
    Realtek 802 WirelessLAN. 11a / g Driver V5.1097.718.2007
    Bluetooth Stack for Windows by Toshiba
    Bluetooth Monitor (Build 20070215) V3.01 + ReadMe1st
    UPEK Finger Print Driver version
    Chicony Camera
    TOSHIBA common modules
    TOSHIBA Hotkey Utility
    TOSHIBA Touchpad POWER utility
    TOSHIBA utilities
    TOSHIBA Power Saver
    ... and so on

    Have you started the installation of all the stuff in this order? I have no experience with the Realtek drivers, but maybe it's important to install everything in order.

  • Satellite A300D-17Z - cannot install the display driver for Vista

    Hello

    There is a big problem with my A300D-17Z.

    The laptop has ATI HD3470 Hybrid Crossfire display system. I'm trying to install the driver in Vista Ultimate, but it does not work. The ATI Catalyst control cannot install and ATI driver file is empty. Shows Device Manager still there are two graphics card with «!» I tried so many ways. Install framework 3.5, pilot of the AMD 7 series, last version of the ATI driver, driver of the same other computer brand who says that worked.

    Please help me, I had been tormented for nearly 48 hours. PLEASE, I BEG YOU!

    Hello!

    Have you tried to install the driver to display on the Toshiba site? You can find it here:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    Before you try to install a new display driver, you must remove any old version in Add/Remove programs. Then, restart the laptop and use CCleaner to clean the system. Restart again and then install the new version.

    You have the same problem with the factory settings? In the worst case, you must reinstall Windows using Toshiba recovery disc.

    Good bye

Maybe you are looking for