Satellite L630 dead after BIOS update

Similar Questions

• Unknown device on the Satellite A100-153, after BIOS update to 5.1

  ACPI\TOS1901 * TOS1901<--- this="" is="" the="" unknown="" device="" after="" bios="" update="" to="" 5.10="" on="" my="" satellite="" a100-153="">

  Vista now shows it in as unknown device manager; the TOS1900 showed up too, but after installation of Toshiba Value Pack for Vista, it went.

  Help, please. WHICH IS: ACPI\TOS1901 * TOS1901

  Hello

  ACPI-> Advanced Configuration and Power Interface
  ACPI defines hardware and software interfaces that allow focus on the OS configuration and power management to enumerate and configure motherboard devices.
  For example: ACPI is necessary for the standby and hibernation mode.

  Now your question; the new BIOS has been updated and configured to using VISTA.
  It seems that VISTA was not compatible with the previous version of BIOS because the ACPI interface. Now you can install Vista on the laptop, but it seems that you need a driver. Possibly new chipset driver version might help. But as you probably know, the drivers are not available at this time. Unfortunately

• Satellite A500 emit after bios update 1.50

  Hey guys and girls,

  I have some problems after the update of the bios. Before the update my laptop has been the scene of much smoother and everything was fine and dandy until Tempro told me to update my bios. The problem is that after the update, the temperature seems to be considerably higher as usual when I play the game (I am a gamer) and also all the games I play seems to be much slower than before (lower, gal frame rate). Before the update I could play Dragon Age Origins with 1366 x 768 with 4 x anti-aliasing and the only one that I could get the same performance with the graphic parameter above is on 800 x 600. Now, it is certainly a big problem for someone who is a graphics junkie when it comes to games.

  * What do you think I should do? *

  A. downgrade my bios for when I bought everything first? (I don't know what version of bios is if anyone knows the stock bios?)
  B. perform HARD drive recovery?
  C. clean install of Windows 7 64-bit?

  My laptop computer spec:

  Model name: Satellite A500
  Part number: PSAR3E-00N005EN
  Serial number: X9206227K
  OS version: Windows 7 64-bit Home Premium edition
  BIOS version: 1.50
  Physical memory: 4096MB RAM
  Graphics card: NVIDIA Geforce GT 230 M

  Any help with this is greatly appreciated.

  Post edited by: Poyzen

  Hi mate

  I think you had a version of BIOS 1.30
  In older versions of the BIOS update are not available on the Toshiba driver download page. Only ASP (partner) has access to these early BIOS versions

  In any case, I found an interesting thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=50577

  Not sure if it could be useful but check

  PS; the graphics card driver update is a good idea it too check

• Re: Satellite - blue screen after BIOS update

  Hello

  My computer laptop girls worked very well until I did the BIOS update this morning. Now, I get the blue screen of death STOP: 0X0000007F. Help, please

  concerning

  Carol

  Hey, Carol, welcome to the forum! :)

  Don t misunderstand me, but may I ask why you n t post more information about your problem?
  Important to know is that your laptop you have exactly and where to download the updated BIOS and for what model. This is important information.

  By the way: have you ever tried to load the default settings in the BIOS after update?

• Satellite A500 - overheating after BIOS update to 1.50

  Hi, I hope someone can help me.

  I updated the Bios to version 1.50 a few days ago and now the laptop overheats and stops after a few minutes, when I play a game (Day of Defeat Source btw, it is not the newest and shouldn't be a problem). This problem occurred for the first time after the update. There was no problem with the temperature with V1.20 before.

  Is it possible to downgrade the bios V1.20? Where can I download the necessary file? I can just download the latest version on Toshibas website.
  I have already asked the support of aid, but they did not send me a response up to now...

  Thanks for your replies! :)

  Hi Flex Barker,

  Are you sure that this problem is really caused due to update BIOS? Normally, these overheating problems are caused by the old thermal grease or dust often due to the radiator. In my opinion, you should try to clean your laptop using a jet of compressed air. This could blow out the dust from the cooling fans.
  Check this box!

  Downgrade of BIOS is normally not possible. Older versions of BIOS, you can get your local authorized service provider. :)

• Black screen on the Satellite A100-712, after Bios Update

  I bought a new Satellite A100-712 and I did a bios upgrade, everything was fine in windows and restart the laptop got it is pasted on the toshiba black screen that appears when you turn on the lapto.

  Any suggestions please, I would be very grateful

  It doesn't sound good. I did the BIOS update on two laptops A100 and everything was OK. Sorry, but I think that you will not be able to do anything alone. I recommend you contact the service authorized in your country as soon as possible.

• T400 dead after BIOS update

  System update to get the latest updates, including the BIOS.  After the update is complete, the machine has restarted but wouldn't start.  Now, when I turn it on, it shows just a blank screen, no hard disk activity.  I guess it's brick, and I'll have to go back to the Lenovo?  Someone has other ideas until I make?

  THX.

  Final update!  Found a post of someone suggesting to disconnect the CMOS battery temporarily, and it worked!  Very relieved the laptop doesn't have a brick, but I just rather in a State where it should be + 10 minutes to access the normal start screen.  After that I disconnected the battery, things seem to be back to normal!

• Satellite L650 - 1KR PSK1JE - dead after BIOS update

  As the topic already says, my Satellite L650 - 1 m Ref. PSK1JE is completely OFF after upgrading BIOS 2.40 - bios-download-page VICTORY.

  I tried everything: press all the buttons, remove the laptop battery, laptop battery only,... .simply anything!

  My last hope is a hidden, very special key sequence for computers laptop toshiba or something like that.

  Of course my warranty is already over... :-(
  Help, please!

  Thank you in advance...
  LichtiMC

  Sorry to hear you have such problem now. I guess something went wrong and now the BIOS chip is bolted to the top and in such situation you need professional help. Toshiba service provider can help you with this, but I'm afraid, it can be very expensive m.

  In the past I never had such problems, but on the net, you will find many pages with description, what can be done. Visit this page and check if you can find something useful. I mean you can try to fix one.

• Satellite C660D-117 dead after Bios Update

  Yesterday, I tried to run the bios upgrade, but it got stuck at step 3 (of 27 I think).
  I left like this for more than an hour, nothing happened.

  I also tried to cancel or press CTRL + ALT + DEL but the machine has been completely frozen.
  He did not react when I pulled out the power cord.

  Basically, the only thing I could do was to remove the battery I did. PROBLEM - now the laptop is completely dead. Is not like the others said that it starts. It does absolutely nothing - even there is no LED turns on when I plug in the power cord.

  I tried to remove the battery and hold power for awhile to reset the CMOS, but not luck.
  It does not react at all.

  Do you think it's solvable by flashing the CMOS again (if it's even possible) or do I have to buy a new motherboard?

  Thank you

  > Think it's solvable by flashing the CMOS again (if it's even possible) or do I have to buy a new motherboard?

  It of difficult to say in most cases it should be possible to bring back the laptop to life flashing the ROM module (where are stored the BIOS), once more using a disc of crisis.

  I put t know if this help but take a look in this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=54395

  Otherwise recommend to ask a Toshiba service technician for assistance

• Satellite P300 - problem after BIOS update

  Hello
  I have:
  Satellite P300-20 b
  PSPCCE-05J011RU
  I updated my BIOS with this update of the BIOS of your site (30/04/09, 3, 40 - WIN version)
  My problem is:
  Loading and relocation of attempt of Windows, the following error message is fixed:

  "Technical information:
  STOP: 0 * 0000007 B(0*F78DE524,0*C0000034, 0*00000000, 0*00000000)'

  So I can't respond to a portable computer HARD drive, the HARD drive is defined in the BIOS.
  Also I checked the HARD drive on the virus, it's pure against viruses.

  Could you help me to update the BIOS to a working condition.

  Hey Buddy,

  This stop code means you use a bad SATA controller driver. The installation of XP, to integrate the SATA driver for install XP. There is a lot of discussion on this issue here in the forum.

  For Intel chipset, you will need to download Intel Storage Manager of Toshiba's official site and follow the instructions here to reinstall Windows with the SATA drivers:
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

  Solution replacement follow the instructions posted by peterk_1. Setting IDE mode instead of AHCI in the BIOS will help too :)

• Satellite Pro M40X: After BIOS Update-no boot!

  Hello, I have the problem: there is no response after you try to update the BIOS (in Windows XP). So I changed the laptop (off AC power, battery away).
  So now, I have after screen black only "light", is there no start menu, no bios, only the STI fan.
  What can I do in this situation?

  Thanks: vladi

  Hey Buddy,

  the only thing you could do is to bring your machine to a (certified partner) ASP for a checkup of hardware or BIOS fix because you have in your situation can't do anything.

  Please, contact a service partner and send your machine to them, it s the only way to solve your problems.

  Here´s a link to find the nearest ASP in your country:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Good luck and good weekend

• Some problems with the LAN on Satellite L10 card after BIOS update

  Hello

  I have a problem with my satellite L10. Map does not work after the installation of the new network of edge of Bios (2.80).
  I tried it on Linux, BSD and WinXp. OS see my net card.
  I can even install parameters and ping 127.0.0.1 and my ip.

  But all the other pool spoke to me query time-out.

  Help me please.

  Hello

  What to say I put t think that this could be linked to the BIOS. First of all, as you said that the LAN card is recognized correctly in the device if Manager she s works well!

  However, you could try to access the BIOS and could set the BIOS default settings. Don t forget to save changes to BIOS ;)

  In addition, it would be advisable to reinstall the NIC driver. The Toshiba driver page provides the Realtek LAN driver v5.618.1015.2004.

  Good luck

• My Satellite L300-110 hangs after BIOS update

  My Satellite falls down after I updated the BIOS. The old version of my Satellite L300 - 110 (PSLB0E) BIOS was 1.40 and upgrade to 1.50.
  From there on, my system hangs over and over again.

  Any help please. I cannot install Office Enterprise 2007, cannot defragment all my readers.
  Is there an option to restore changes made to my BIOS?
  Help!

  The default settings in the BIOS load after the update?

  You can reinstall Windows with the Toshiba Recovery disk? First back up your data because the HARD drive will be formatted and then start the installation of recovery.

  A restoration to the previous version of the BIOS is not possible, because on the Toshiba site is only the most recent (1.50) BIOS. Only an ASP (authorized service provider) can do a restore.
  You can search for an ASP here:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an ASP.

  I don't know Mr. but you did a backup of the old BIOS? Maybe you can Flash this back.

• Satellite L450D - 13 X - blue screen after BIOS update

  I have the blue screen after BIOS update. Satellite L450D - 13 X worked ok before that ideas?

  Is there contact information for Support TOSHIBA?

  Hey,.

  > Is there any TOSHIBA support contact information?
  No, becaue, must contact an authorized service provider. Guys can help on any hardware and software problems and can also order spare parts from Toshiba.

  Here is a list of aspic, where you can look closer:
  http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT

  Good luck! :)
  ?

• Satellite L630: unsupported message bios while the installation of ECO urinary infections

  Hello everyone,

  can someone help me solve this problem?
  I have the Satellite L630. After the installation of the new operating system and drivers during the installation of the Eco utility, it gives me this 'unsupported bios.

  What can I do?
  Note: I have updated the bios to the latest VERSION

  Hello

  What model of laptop do you have exactly? Satellite L630-xxx?
  What operating system do you use?
  What version of BIOS did you choose?

  You can install the operating system using the recovery disk?