Satellite L650 - 1 M 0 - Question about LED control using a writing software? in C++

Hello

Is it possible that a console program written in C controls the State of the led on the computer?
I speak not here the LED keyboard, but the led corresponding to such a State of hard disk, power state.

It's at all the possibility to 'take control' over these diodes? Or rather, it controls a separate computer system?

Most of the care on the State of control module LED WiFi adapter. I replaced the network card, but my laptop is not the end of support. Start the computer, but you can't control adapter to function keys. When you disable the card in Device Manager, the light does not turn off.

If I could create a program that will control the LED, if I could take a supplement (separate second program) for the function keys, which does not support the new card.
Laptop is a Toshiba Satellite L650 1 M 0.

I think that computer security is not strong because it is not protected from the BIOS. If it was, wouldn't at all. Only the lack of logic LED WiFi.
By taking the scientific program caught can control the LED.

Please be patient with me and write in plain English-the two shows (I'm a novice programmer C++ programming language) and English.
I don't know English well, so I took the Google Translate. Sorry for my bad language...

[b] compiler: [/ b] Microsoft Visual C ++ 2010 Express
[b] software language: [/ b] C++
[b] type emission: [/ b] console (maybe later I'll try Windows Form...?)
[b] system: [/ b] Microsoft Windows 7 x 64

I know that this forum is no longer on the problems associated with technical problems, but none of you can know what is "address" LED WiFi that is already associated with the knowledge of the equipment.

Hi Krzysiolek

I guess that no member of the community would be able to help you in this case very particular.
I guess you should ask for a person with good knowledge of C++ programming.
Here you can meet people and enthusiasts who talk technology, share their knowledge and trying to solve some common problems of the laptop.

However, good luck

Tags: Toshiba

Similar Questions

  • Satellite L650-11R - a few questions about this

    Hello there :-)

    I have a few questions about my new L650.

    I've never had Toshiba notebook before so I apologize if some of these "quirks" are actually quite normal on this laptop. I really want to hear the views of other users L650.

    1)
    First of all, by the time I turned it on I saw gradient thin (1-2 mm) along the right edge of the screen that goes from the bottom up. Maybe "degraded" isn't the right word, but it seems that since two or three pixels are kind of discoloration or lose brightness/sharpness to the edge along the straight bezel. It is not really that visible, looks like the colors are desaturated a bit here or brightness is a bit lacking. He can be seen everywhere (bios or no color in Windows, but better in the lighter background).
    The left side (or other) seems ok, all this along the right edge is somewhat suspicious. If one can compare? I don't know if it's something to worry about or is just supposed to be like that.

    2)
    The other thing I noticed heating of the processor (Intel i3 330M) and GPU (ATi Mobility Radeon 5650). It's pretty hot here right now (I would say that the temperature is around 28 degrees Celsius when using cell phones). He is sitting on the hard surface (table) and nothing is blocking the vents.
    However, at "rest" (surf the web & regular light stuff), average CPU temp hovers around 58 ° C. It usually goes from 45 to 62 in just a few minutes after starting, and then I can hear and see (Toshiba PC Health Monitor) evacuate the kicks in. Temp goes back to 50 +, event stops and then the temp rises to 60 + until the vent is used again.
    During load full (Prime95 or some games), CPU is going all the way up to 75 degrees (the highest being 77). Fan runs at 75 to 77% during this time, never go faster.

    GPU idling is usually around 5 degrees above temp CPU (62-65). During full load (for example. Benchmark of Far Cry 2), I see a lot of stuttering with the latest drivers Catalyst and DX10 (not sure if the stuttering has something to do with heat), otherwise it is ok (no artifacts or anything like that). Temp of GPU during the loading goes up to 74-75, fan speed is locked at 30%, the frequency of the heart 5650 is 450 MHz. left side of the laptop (vent and below) is pretty hot, while the keyboard is warm (or slightly warmer who who).

    These time seems correct and safe in the long term? I'd rather events works all the time (they aren't really very strong) and keeping time less than 50, but there are just wishful pious bios control events and I can't control not the bios. :-)

    3)
    This is just General related products. :-)
    Official specifications of Toshiba L650 say ATi 5650 (between other low range GPU), but I saw a few specifications calling for there 5730 (same model 11R). Is there really a Satellite L650 with ATi 5730 GPU models?

    Sorry for the long post, I tried to include the best possible description that I could do. :-)

    Thank you in advance.

    Thanks for the additional info!

  • Satellite C50-A-571-two questions about download Toshiba drivers

    Hello all, great day... How's doin?

    I'm new to this forum, it is good to will here hoping finds the solution to every problem we face

    My first question is: why download drivers of "http://www.toshibamea.com/" is so slow and limited or something? It never ends download, I have always the connection interrupted when trying to download a driver, are there not other mirrors or something?

    Second question:

    Why are there so many useless drivers? as I put all my preferences, product type, family, model, series, and he gave me 33 pilot and some of them are not the drivers for my laptop

    I have a portable Satellite C50-A-571

    Hello and welcome

    I m not an expert but I'll try to offer my responses.

    1.
    As far as I know page of media you use is offered for the Middle East and Arica. I don't know where is the server placed but the download should not be problematic. In the past, I've used several times to check drivers and everything was OK. Perhaps there is a problem with your Internet connection.
    Toshiba support and download page is certainly not limited and can be used whenever you want.

    2.
    I ve checked the download page and found 33 results for Win7 64 bit so I assume you want to install this version of Windows.
    In any case all the stuff listed are not just pilots, but also specific tools useful to Toshiba and utilities. This tools and utilities to control some useful special features as feature special keys or the HARD disk protection.

    I recommend install you all of them and just have a total control on your machine. Of course if you don't like or don't need some of them they can be disabled or removed from the system.

    I hope that my opinion is useful for you. If you have any other questions you are welcome.

  • Satellite L755 - 1 c 3: Question about Ubuntu and Wi - fi card compatibility

    Hello

    I plan to buy a Toshiba Satellite l755 - 1 c 3 here in Italy, but since I am a user of Ubuntu I want to check compatibility with the wifi with her cards.
    So I have 2 questions:

    Model of card wich Atheros get? (has not been able t find on internet)
    He works with Ubuntu 11.04?

    Thanks 4 any help!

    Hello

    It s an Atheros AR9285 chip that supports 802.11bgn, the Bluetooth V3.0 + HS
    I think that it shouldn't be a big problem for Ubuntu to recognize this chip.

    Welcome them

  • Satellite A660: Comment and a question about button lighting / mute

    Note:

    Hi, I'm the proud owner of a satellite A660-166 (3 days) and I installed everything from scratch on the win 7 pro because I got my laptop with a home (need pro for work) version... I met some problems, but this forum really answered my questions :) Never found such a useful for technical support forum. I wanted to express my gratitude and my support for everything you do for users :)

    Problem: well, this isn't really a problem, more a curiosity... I had a few problems with the key eco, at this time there button lighting / mute was to mute... Thank you guys, I found out what needed to be done, I reinstalled the Flash card software and everything worked properly more the lighting button / mute has been for enlightenment now. I have nothing against that, I prefer it like this, but I wonder how to change that... I found some response on the use of toshiba wireless Assistant and the illumination tab... Because my laptop is fairly new, that I do not have a tab of enlightenment, I was wondering how to change the mute button if I want to?

    Thanks, keep up the good work!

    It's nice to hear that you found answers to your questions here. Many people here trying to help.

    Back to your question: it is not easy to give a precise answer and I really put t know if you can change the settings of a single button. I think it has something to do with the registry entries, but how to change, that's another question.

    If you use this button for lighting ON / OFF, you can use FN + ESC for the mute button so you have two options that can be used with a touch or quick key combination.
    Can you please test and confirm that it works correctly?

  • BlackBerry Smartphones GPS 'search for satellites... ". "questions about T - Mobile BB Curve 8900

    My wife and I had our 8900 s for 6 months.  All this time, the GPS worked so sporadically (works maybe 5% of the time) that we have renounced them.  I read all the posts on almost all forums, including this one.  I was on the phone with T-mobile for more than 2 hours - almost an hour of going out on my patio in 105 degree heat!  After going on all of the possible settings and reboot several times, the girl has finished telling me that it must be because the trees in my yard blocked the signal.  His only suggestion - call RIM.  What have I learned?

    1. I can't use my GPS inside to plan a trip. (roof and walls block signal)

    2. I can't use my GPS in the van to get to a place. (signal blocks of metal body)

    3. I can't use my GPS in a city to find an address. (buildings of great height-block signal)

    4. I can't use my GPS in the mountains to keep from getting lost. (trees and mountains block signal)

    5. If I am in the open field, GPS find signal about 5% of the time.

    6. I can't find the phone support for us peons.

    My brother, daughter, nephew, and everyone - make sure everyone - who has one phone other than a 8900 can get a signal just beside session from me.  My phone: 'search for satellites... ". »

    If a person tells me that I must be "outdoor" to use my GPS, I'm their Butterfly!  However, if you have a constructive suggestion, I'm all ears.  And before ask you, I have a data plan unlimited, and I tried with location helping the Endabled and people with disabilities.

    Thank you

    A frustrated MdniteRyder

    Hello

    Just type test anywhere in the window. Nothing Pat, but something goes off

    Peace,

    BBTechSupport

  • Satellite X 200 - 20 G: Question about BIOS 2.20

    Hello

    Could you please bring me some lights on the warning that introduced the 2.20 BIOS upgrade:

    *!!! * Upgrade BIOS from Windows XP BIOS only on VISTA BIOS V2.20 V5.10 or more! * *

    I am mainly interested to understand what the relationship is with XP.

    I have a Satellite X 200-20 G with the first hard drive with Vista (default configuration) and a XP Home edition on the second hard drive, and I use the menu of the BIOS to boot to one side or the other.

    Thank you
    Guy.

    Hello

    On some laptops the BIOS must be updated to the XP version if the Win XP operating system has been installed.

    The warning indicates that if you have already updated the BIOS to version 5.10 XP refresh you could again only at the version 2.20 of BIOS Vista.

    But it seems that the version XP BIOS for Sam X 200 doesn't exist at this time and in my opinion you can neglect it ;)

    Best regards

  • Satellite X 200 - 21 K - Question about installing the Toshiba drivers & tools

    Hello

    That's what I want to do, so... Please help!

    I just buy new notebook TOSHIBA SATELLITE X 200-21 K, and I want to format it, and... to install Windows Vista Ultimate (not Windows Vista Home Premium product Recovery DVD-ROM).

    I downloaded all the drivers from...

    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

    ... but I can't find the "Instructions of Installation' to download anywhere, so I can install it in the right order, unless... If 'Please click here to download textbooks.' is 'Instructions of Installation', if not... Please... where I can download the appropriate instructions!

    So... after I format and install new Vista Ultimate, I won't have... TOSHIBA original tools that came with the recovery DVD-ROM products, can I actually loose something with it, like... soft Web Cam help TOSHIBA TOSHIBA zooming Utility or or Protector Suite QL... and so on... I can go without it?

    Can I install or download just this sweet, once I installed Vista Ultimat, maybe product Recovery DVD - ROM, but how?

    Is it just the version of Windows Vista Home Premium that come
    with this product Recovery DVD-ROM or... all versions of Vista comes in this DVD, and you can choose which version you want to install?

    I hope someone will help me with my 'problem '!

    Thank you very much!

    Best regards

    It is a good idea SSI23. The update should functions too.

    Regarding the Toshiba drivers on the Toshiba page;
    Well, on the page, you will find the common drivers and utilities you won't find 3rd party software characters, which is part of the image of Toshiba. These software are found only on the image of Toshiba (recovery CD).

    Good bye

  • Satellite Pro C660 - 21(d): question about the partitions on the HARD disk

    Hello

    I just started using my new satellite pro c660 - 21 d

    My office has drive c, d, u, s
    C either windows 7, Vista D
    The drive U is 342 meg in size

    I didn't have the disk in two 230 gig drive so thoughtless narrowed C drive of 70 GB and D drive with 10 gig (it's the primary recovery partition

    I have now two empty partitions of 170 Gig (from c drive)
    and 214 Gig (from d drive)
    But windows will only allow me to add one as a disc of the user
    He says may not have more than 4

    The reason for being there is a partition of Active recovery without letter.

    I can't unshrink drive C or drive D then I went with 170 GB of unused space.

    I guess that a solution would be to lose the data disk 10 gig that contains the recovery software but then I don't have a backup.

    Suggestions as to what I could do to work around this problem.

    I am now under the Create recovery disks (2 of them) so maybe I could remove one of the partitions after.

    I don't know why he answered instead of edition, but if the recovery disc creation complete with no errors, I can remove the hard drive?

  • Satellite L50 - A - 1 5 - question about max LAN speed

    Qualcomm-Atheros AR8171/8175 PCI - E Gigabit Ethernet Controller (NDIS 6.30)

    In the specifications it is said that this network adapter might work on the speed of the LAN 1 Gbps 1000base-t.
    But the max speed that is displayed on my system is 10BASE-T/100BASE-TX.
    Why?

    System: _
    Toshiba Satellite L50 - A - 1-5
    Windows OS 8.1
    Driver version 2.1.0.21
    Qualcomm-Atheros AR8171/8175 PCI - E Gigabit Ethernet Controller (NDIS 6.30)

    You're right, the network adapter. Atheros QCA8171B supports networks: 1000BASE-T/100Base-TX/10Base-T

    To use the range, the router should also support the 1000BASE-T.
    Did you check that?

    In addition, you can change the LAN settings in:
    Device Manager-> LAN card-> properties-> Advanced tab

    Here, you should check if 1000BASE-T option is selected and chosen.

    I also recommend you check the BIOS settings because as fat I know some LAN function can be enable/disable in the BIOS

  • Satellite C50D - A - 13 G - question about memory GPU

    Finishing bought the new laptop, TOSHIBA C50D - A - 13 G, but I have a little problem.
    It says in the description
    (Graphics card: AMD APU A6-5200 with graphic AMD Radeon HD 8400 card)
    Graphics card memory: up to 4090 MB)
    but I do not have how to allocate this memory, I tried the BIOS, but the option to allocate memory is not listed there.

    Help, please

    In the specification is clearly described:
    > amount memory: up to 4 090 MB shared memory with 8 GB of installed system memory and up to 8 186 MB with 16 GB of memory system (with the operating system pre-installed 64-bit Windows®).
    With other words: with more RAM your GPU will use more memory.
    It works automatically and you can not change anything.

    So if you want to have more memory GPU you need to upgrade RAM.

  • Question about the photo (using the folders and Photos app)

    Hello

    I am new on the app Photos - aperture used briefly but never really liked. I used to manage/sort all my photos with simple folders on the hard drive. Now, I would like to move the direction of the Photos app.

    A few questions:

    1.) if I add images, are they duplicated on my hard drive when I import them from Photos?

    2.) how to delete images permanently? I need to do a cleanup, which is easier in the Photos. If I delete the images here (and also delete the "recently deleted" album), why they remain in their original on my hard drive folder?

    Any help is appreciated - thanks!

    1 - Yes by default which is highly recommended, as was the case with iPhoto you then delete the photo source since it is safe in the library

    2 - pictures works just like iPhoto - nothing outside the library is not affected by what you do in the application - see 1

    LN

  • Question about the possible use of MSVC 2008 Express as an external compiler CVI 9.0

    I was looking for these messages looking for information on the use of the ICB with external compilers, especially from MSVC 2008, and I came across this ad are about 4 months:

    "CVI 9.0 and MSVC 2008 express.

    The title of this announcement means that the freely downloadable 'express' version of MSVC can be used with CVI 9.0, but the body of the message is not in the details.  But I would really like to know if this is possible, and I'm guessing there are others here who could be very interested as well.  Page 8 of the CVI 9.0 release notes does not indicate that the Express version is supported, which makes sense.  I say this because I always thought that "express" versions of the MSVC were only to create .NET applications (C + c++ / CLI) and applications not native to Windows.  Or does change with the release of MSVC 2008 Express?

    There is no hurry to answer...

    JB

    If you have a CVI 9.0 FDS(I'm not sure about the BDS)

    Select Options/Build Options

    Select the Select button to the right of 'compiler active'.

    Click 'new' to create a new configuration of external compiler

    Select MSVC 9.0 as a model.

    Choose a configuration name (what you choose to CVI) and a destination file (where the external compiler settings will be stored).

    Click OK

    After that, you can easily select the optimizing level and the level of warnings that you need through the "Edit" in the box "compile to realease configuration.

    Kind regards

    Nicolas

  • Question about the control panel user accounts in windows 7.

    This might be a bit of a strange question, but I'll see what I get. Basically when I enter the control panel via my username (not the admin account) and click on "Add or remove user accounts" and enter a password to admin, the photos on my user and admin account both fail (but they are there on the log on screen, etc.). But the guest account (which is disabled) the image of bag of comments showing. But if I enable the guest account, the image disappears. Strange. Any ideas how to get the pictures to show up there?

    Also, I will add that this occurs only in the standard user, not my account Admin accounts I converted my standard account to an administrator account, and the pictures then decided to appear.

    Thanks for your time.

    I have the same problem, and that this does not affect my usage, I don't worry in this regard. Frankly, I was wondering that myself...

  • Question about ESXi 5 use cases

    Hello

    My name is David Baldock, and one of the IT guys here at work suggested that with the help of VMware ESXi 5 could allows me to accomplish what I need to do on my system, without having to close and restart between Linux and Windows 7 for different tasks.

    I recently upgraded my PC to a processor Intel Core i7 - 3930K on a motherboard ASUS X 79 Sabertooth (VT - d support in BIOS) with 32 GB memory DDR3-2133 2 NIC and an AMD HD graphics 7970.  While I have not a card SCSI or SAS in there, I have a 256GB SSD OCZ Vertex - 4 2 x 120 GB OCZ Vertex 3 Max - SSD IOP, a 600 GB 10 K RPM Raptor H/D and a Blu - Ray SATA writer.  The SSD & H/D is on SATA 6 Gb/s ports, and the Blu - Ray is on a SATA 3 GB/s port.

    I normally run Linux on my PC, but the photo post-processing software that I use (DxO Optics Pro 7.5) works on Windows 7 and using OpenCL to take advantage of the computing power of 7970 HD.

    I understand that the VMware ESXi 5 installs as a hypervisor directly on the hardware and then allows multiple VMs to be run simultaneously on the system.

    Read on ESXi 5 (see courses and link below), I don't know if I should add a SCSI or SAS card, or if I can install and run VMware and OS on the SSD Client, using the large Raptor H/D to common storage?  There is a 2 to drive Iomega NAS connected to my network (and I have several external drives with SATA or USB-3 interfaces), with future plans to add in addition to stand-alone drives NAS or a big NAS RAID Array.

    The main question I have is if the material resources are dynamically reassignables between Virtual Machines?  For example, if I'm normally running Linux, then I would most of the CPU cores and the video card to "assign" to this virtual machine - but when I need to process the photos, I want to be able to boot Windows 7 and "reallocation" most of the hearts of processor and Passthrough the 7970 HD for this virtual machine to provide the computing power for the DxO Optics Pro.

    Is it possible to use VMware ESXi like that, or I'm better stop the PC and reboot between operating systems?

    Thanks for your ideas and suggestions.


    Take care
    David Baldock

    =====
    Quote from 'ESXi hardware requirements:

    For Serial ATA (SATA), a drive connected through taken SAS controllers supported or supported integrated SATA controllers. SATA drives will be considered remote, non-local. These discs will not serve as a partition to scrape by default because they are too far away.

    Note
    You cannot connect a SATA CD-ROM device on a virtual machine on a host ESXi 5.0. To use the SATA CD-ROM device, you must use the IDE emulation mode.

    Note
    ESXi does not support using SATA internal disks local to the host server to create VMFS stores of data that is shared between multiple ESXi hosts.

    =====
    Citation of "VMware Articles 10/05/11 06:51:
    VROOM! : GPGPU Computing in a VM

    Regularly on the forums I see people asking if GPGPU computing is supported by ESX, prompting me to write a brief message on the subject:

    YES! VMware ESX supports GPGPU computing. Applications can access the GPGPU CUDA or OpenCL in exactly in the same way that when running in native mode - no changes are necessary for the application.

    =====
    http://communities.VMware.com/community/VMTN/CTO/high-performance/blog/2011/11/21/SC11-virtualized-GPU-compute

    =====

    Install ESXi 5u1 on the system, then upward, setting it up as a host server. Then use another computer (Yes, you need to have another system actually configure/use the host) to configure passthrough and others. I don't know if it's available in the free version, so you don't have to try it and see. Be aware that you will be able to use the video adapter on a virtual machine single at some point.

    I just activate DirectPath of e/s on my own host (a nVidia Quadro NVS 290) video card. It requires a restart until it's available, however.

    So, if this works (for you too) enable you, reboot the host and then attach one of the virtual machine to the video card to use. You will then be able to use your other system to open a console window in this VM (from the Client vSphere connect directly on the host server) to do what you want / need.

Maybe you are looking for

  • Z830 - pad digital satellite on the external keyboard does not work

    Hello I tried to get an external keyboard (USB) to work with my Z830 running Win 7 (64-bit). I've tried three different keyboards to USB in ports and also a wireless keyboard. The keyboard works fine, but I can't the numeric keypad right of the keybo

  • The installer of Windows Multipoint

    Hello, my name is Lewis and I have some questions about windows Multipoint. I help with a service that is intended for children with autism and we begin with a small group to leave the children to meet new people and play games together for example M

  • HP laptop system disabled

    My parents gave me their old laptop just, but said they had some problems with it. When I tried to turn it on I got a message "enter the power on password.  I tried a few things, but then got a message from the system disabled. The key is 62187803. I

  • M58 series via LAN (GROUND Intel) driver

    After RIS'ing a client with windows XP, I had to update some devices in the device with the correct drivers Manager. But after all downloads for my 7360AEG M58, I'll still have an unknown device "PCI Serial Controller." After Google search, I found t

  • HP 100 b All In One: Ctrl + Alt + Delete

    My splash screen says press Ctrl + Alt + Dele. I do see the administator HP screen. said lockked. When I click on it, all right. How can I get rid of the Ctrl + Alt + Dele? Never had this before. Any help or solution would be greatly appreciated.