Satellite L650 - 1 Q 3 - DVD player does not recognize DVD

Similar Questions

• Tecra M4 - DVD player does not recognize discs in Vista

  Hello

  After the installation of Vista my dvd player does not recognize discs!
  No update XP! It was a clean install of Vista.

  I found several links on the upper filter and lower registry entries this entry does not exist in my registry under the CDROM class.

  I tried the XP disk it works fine and recognizes all.
  Drivers are installed correctly no problem in Device Manager is invited.

  So I have no idea how to run it, seems to be a Vista problem

  Could someone help me? I am really frustrated to this topic

  Thanks for your help

  Maybe this helps:

  -Remove the drive from Device Manager CD/DVD.
  -Then access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  -Reboot the laptop

  But what happens exactly? Which disks are not recognized?

• Player does not recognize that the CD or DVD is loaded

  A player does not recognize that there is a disc inserted - when I try to use, it ejects and ask valid.  I tried several CD and DVD with the same answer.  I downloaded the BIOS and readers say that it works correctly.
  Can you help me please?

  Sounds like the drive has failed.  You can try to clean with a CD/DVD audio standard disk cleanup, but if it fails, then the reader should probably be replaced.

  "RoboTriumph" wrote in the new message: * e-mail address is removed from the privacy... *

  A player does not recognize that there is a disc inserted - when I try to use, it ejects and ask valid.  I tried several CD and DVD with the same answer.  I downloaded the BIOS and readers say that it works correctly.
  Can you help me please?

• my dvd player does not recognize blank dvd but also recognize CDs, with files and cd dvd empty

  my dvd player does not recognize blank dvd but also recognize CDs, with files and cd dvd empty

  This might help: http://support.microsoft.com/gp/cd_dvd_drive_problems

• Windows media player does not recognize my hard drive

  Windows media player

  Why Windows media player does not recognize my hard drive

  Hello

  1 are there any changes or updates made on the computer?

  2. do you get an error message? If Yes, what is the full and exact error message?

  I suggest to see the links and check if it helps:

  The problems of the CDs or DVDs

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-CDs-or-DVDs

• Windows Media Player does not recognize the new downloaded songs

  I have a Pavilion a4310f Prod Nr: race AY014AA-ABA, Win 7 Home Premium 64-bit.

  I just found out that Windows Media Player does not recognize the songs, I recently downloaded from Wal-Mart music download Site.  The songs can be seen in the music library in a folder called 'Downloads' and I can open each song and he will play when double-clicked.  The problem is that I can't create a playlist containing the new songs and burn a copy of the reading list, because the songs are not listed in the Media Library Player any hot it is sorted (artist, Album, Genre, etc.).

  Any help/suggestions would be greatly appreciated.

  Mitch

  Problem solved!

  Went to: start == > Control Panel == > troubleshooting == > view all == > and ran troubleshooting on the library and the settings of WMP.

  Convenience store detected library corrupt and "in media files appear in the WMP library.  Then ran convenience store on WMP settings which reset OMP to default settings.  After that, everything worked as announced.

  Thanks to Big_Dave for putting me on the right track.

• Windows Media Player does not recognize the iPod touch.

  Windows media player does not recognize my ipod touch to sync

  Open WMP in the taskbar from top, find "Tools", scroll down to options.

  in the new window, locate the Hardware tab, add hardware.

• Windows Media Player does not recognize my Archos 5 internet tablet

  Original title: windows media player

  All of a sudden my windows media player does not recognize my Archos 5 internet tablet when I plug in the USB connection cable. I have the media player 11 and this is what is recommended. I do everything according to the book and he just keeps telling me to connect a device.

  Hello

  ·         Is the device is detected in windows Explorer (start > my computer)?

  ·         You are able to see the device in the Device Manager?

  ·         What happens when you try to connect to the device? You get the error message?

  ·         Did you try the device on another computer or another USB port and check if it works?

  ·         Remember to make changes on the computer before the show?

  I suggest you follow these methods and see if it helps:

  Method 1:

  I suggest you to uninstall and reinstall Windows Media Player 11 and check if it helps.

  http://www.Microsoft.com/download/en/details.aspx?ID=8163

   

  See: installation and removal of the drive

  http://Windows.Microsoft.com/en-us/Windows-XP/products/Windows-Media-Player/11/Readme

   

  Method 2:

   

  If the device is not detected in Device Manager, or if you find any yellow exclamation try to uninstall it restarts the computer and check if that helps.

   

  How to configure devices by using Device Manager in Windows XP

  http://support.Microsoft.com/kb/307970

   

   

  Method 3:

  Also run the Microsoft Fixit and check if it helps.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

   

   

  You can also check out the link below:

  http://www.ARCHOS.com/support/support_tech/FAQs/en/faq_Archos5.html?country=us&lang=en

• Windows Media Player does not recognize the device (iphone)

  I'm trying to download music from Windows Media Player on my iphone. I can get the files in the synchronization section but the Media Player does not recognize my device or seem to have a way to connect. Can anyone help?

  You will need to install iTunes. The iTunes Setup program adds drivers and services for the iPhone. That's what I do:

  1. Once iTunes is installed, it allows to import all the music in Windows Media Player.
  2. If you want to automatically download album art, you will need to register for an iTunes Store account. Otherwise, just copy the album art from Windows Media Player:
  a. at a command prompt, cd in each music folder.
  b. attrib s h AlbumArt * Large.jpg
  c. xcopy AlbumArt * %tmp% Large.jpg
  d. attrib + s + h AlbumArt * Large.jpg
  e e.. now, for each album in iTunes, right click and choose 'Get Info'. Drag & drop the corresponding JPG of %tmp% in the field "Cover Art" and click OK.
  3. connect your iPhone. Select "Manually manage music" on the screen of the iPhone.
  4. click on the icon on the left side of iTunes music. Make sure that all the music that you want to synchronize has an audit. (This is the default).
  5 Select and drag it to the icon of the iPhone.

• Satellite A100-773: CD/DVD player does not recognize the CD

  Hello friends,

  I have satellite A100-773.
  When I turned on it today it does not recognize any CD. He acknowledges, however, DVD and can also burn CDs with Nero.

  As soon as I put in a CD it says (in German) something like "access denied, unauthorized function.
  It's a mystery to me what happened. Until yesterday, it was perfect. Now the same CD (and I tried 20) wouldn' work anymore.

  I tried the recovery system to an earlier point in time, but it does not help. In the hardware Manager tells me that everything is going well.

  Do you have any idea what it can be?

  Thank you very much

  Ognian

  Hello

  In such cases, it s is not easy to say why it happens.
  Usually if the drive cannot read media either material works badly or the CD / DVD is not compatible and taken in charge.

  But we hope that the equipment is not damaged.
  Try to remove the drive from Device Manager and restart the laptop.
  After that restart of the operating system should recognize the drive again and load the driver. Then you could try to test the drive again.

  I also found a very large Microsoft document on:
  How to troubleshoot problems that occur when you copy data on a CD - R or CD - RW optical disc in Windows XP
  http://support.Microsoft.com/kb/324129

  and this:
  http://support.Microsoft.com/kb/315350/

  The other possibility is to use the recovery CD to reinstall the OS.

• S5-1060 casing dvd player does not recognize the Bluray disks after you restore windows 7

  I have a s5-1060 casing with a HP DH12E3LH bluray player, recently the computer was so I took out the restore disks and just do a fresh install of windows 7, it works fine now, BUT the only thing I can't understand is why my bluray in unity player not to see, recognize or play blurays now.

  The Device Manager shows the best drivers are already installed (21/06/2006 microsoft 6.1.7601.17514 driver), and he will play CD, DVD, just does not recognize a bluray disc.  I might say, we watched top of 25-30 movies on it so I 'hope' is not burned or something altogether.

  It indicates that the device is working properly in Device Manager he calls it a cdrom drive (not sure if it matters), but with a bluray in the drive, it shows under properties / status / no media in the drive.

  I'm not really sure where to start on this, drivers seem strange to be so old, is it a firmware I can update if so where can I get that info, I went to the hp site let it detect the computer saw the driver updated but nothing which was directly related to the cdrom drive.

  Thanks for any help on this just stumped at this point, as it was working before the full restoration to the computer using the recovery disks, then there must be something simple.

  Hello FTLOSM,.

  I understand that after making your computer your Blu - ray discs won't play in Windows 7. I'm you provide a document from HP support: solve the DVD and Blu-ray movie problems (Windows 7) that will guide you through the troubleshooting steps to resolve this problem. I would focus on the topic impossible to watch movies in Blu-ray 3D. I am also you provide the link to the Drivers of HP Pavilion Slimline s5-1060 desktop PC page.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• Media player does not recognize my cd/dvd burner

  I use Media Player 11.0 on XP SP3.  The tab device recognizes my cd/dvd burner, but when I select the Recorder tab, it says: connect a burner and restart the player.  Any ideas why the burner tab does not recognize the burner?

  Mike. T.

  Hi Mike,.

  (1) don't you make changes to the Windows Media Player settings prior to this problem?
  2) are able to burn CD/DVD with your CD/DVD-ROM?

  Follow the steps in the link here and check for the issue.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Write to us if you are still experiencing a problem. We will help you.

• DVD player does not recognize certain DVD movie purchased.

  My dvd player is no longer recognising some DVD movie bought she used to play without a problem. The difficulty seems to be related to the protection of copy on the DVD. Cheaper DVDs with the content of the 'public domain' are playable, while recent successes are not. Yesterday I updated the DRM for WMP 11 and cost the problem go away, but this morning, after the last update of security Windows installation, I'm back where I started. Any suggestions?

  Have you tried a system restore to a point before you started having this problem?

  Wednesday, August 4, 2010 19:03:27 + 0000, owlshead wrote:

  Thanks for the reply, Barb.

  I had this problem for the last month. I am always connected with administrator privileges. The computer is an old gateway 700XL running Win XP Pro SP3. The DVD drive is a LG HL-DT-ST DVD RAM GMA 4020 B. Not sure about a bios update for the computer, but checked and not found any updated firmware for the drive. I have download the K-Lite codec package.

  Discs of film that won't play or play with unwelcome program include discs that played without any problem and a brand-new movie that won't play at all. In addition to WMP 11, I also have Media Player Classic, which will play the older discs after several tries and a message 'failure to protect against copying'. It does not recognize the new drive at all. The new disc will play on our DVD TV player.

  After that I updated the DRM for WMP 11, all disks were playing without problem on my computer. Yesterday morning, I got Win XP update malware removal tool, and after that I installed it I was to place 1 - old records playing with a lot of difficulties and messages "has no protection against copying" and the new disk plays do not at all.

  Barb Bowman

  http://www.digitalmediaphile.com

• New computer: DVD player does not recognize discs

  I have this computer (HP Pavilion) about 3 months ago. It already came with windows 8 when I got it, is not a recent issue of download. When I put a game disc in the DVD drive for installation, it is yet to report an error, simply, it does not recognize the disc. I tried with a DVD film as well, and it's the same thing. I never used the drive before today and was super disappointed that it didn't work. New: what's more relative than all works do not, is that the system does not recognize the potential error.

  Hello

  Thanks for posting your request here in the Microsoft Community.

  This would have occurred because of hardware or software related issues. I would like to know some information about this problem so that we can help you further.

  1 have you checked the device status in Device Manager?

  2 did you changes to computer settings prior to this problem?

  I would suggest trying the following methods and check if it works for you.

  Method 1:

  Run the hardware and devices Troubleshooter and check if that helps. It is an automatic convenience store to help you solve common problems with equipment and other devices.

  Follow the steps to run the Troubleshooter:

  1. Press Windows + Q on your keyboard to display the bar of charms.
  2. Troubleshooting type, and then click Troubleshooting under settings.
  3. Now, type Hardware Troubleshooter in the option Search .
  4. Click on the convenience store equipment and devices and follow the instructions to run the troubleshooter.

  Method 2:

  Try installing the latest drivers, including drivers for the chipset and check if the problem persists. This is to check if the problem is caused due to any driver related issues or not.

  See the following Microsoft Help article to download and install the drivers.

  http://Windows.Microsoft.com/en-us/Windows-8/all-drivers

  Note: the steps for Windows 8.1 also applies to Windows 8.

  Please reply with the status of the issue so that we can better help you.

• Windows Media Player does not recognize my smartphone?

  I tried to sync my music from Windows Media Player library, but it does not recognize my device. I have a Samsung Galaxy S2 (SPH-D710). My computer recognizes it, but when I plug it in a dialog box doesn't show up asking me what I want to do as it does when I connect my USB.  I tried to update the devices, using different USB ports, by restarting my computer and restart my phone. Nothing has worked. What can I do?

  I tried to sync my music from Windows Media Player library, but it does not recognize my device. I have a Samsung Galaxy S2 (SPH-D710). My computer recognizes it, but when I plug it in a dialog box doesn't show up asking me what I want to do as it does when I connect my USB.  I tried to update the devices, using different USB ports, by restarting my computer and restart my phone. Nothing has worked. What can I do?

  See if the suite helps you: -.

  WMP11

  Synchronize your media files to a portable device

  Set up a device to sync in Windows Media Player
  WMP12
  Set up a device to sync in Windows Media Player
  Synchronize music, photos, contacts, and calendars with a mobile device
  Windows Media Player sync: frequently asked questions

• CD PLAYER does not recognize the CD. He will not play, rip or burn CDs

  my cd / dvd drive does not recognize any any cd No. He plays either tear up or burn music. everything was fine for the past two weeks. Please help me, what should I do? I have windows XP

  Hello

  1. don't you make changes on the computer before this problem?
  2. do you get an error message?

  Try to run the fix it tool to the article below and check.
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/

  See also:
  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD
  http://support.Microsoft.com/kb/321641