Satellite L650 - 10 M shows blue screen with Twinhan Azurewave AD-SB200

Similar Questions

• Satellite Pro A200SE-1F9 starts showing blue screen

  Hello

  I recently bought a Satellite Pro A200SE 1F9 (2.00 Ghz, 2 GB RAM, professional running Vista), after 4 months he began to launch Blue error screen. I tried not to upgrade or fix a new material. I had a Linux Fedora 7 (dual boot), as I was getting this error quite often I got Vista Business (using Toshiba recovery disc). Now, I have only Vista in my laptop (lost Linux completely).
  Some time the Notepad starts and goes inside Vista, after 10/20 mts, it starts again after showing blue screen, in other cases it keeps restart after a quick blue screen start.

  I'm really frustrated by this behavior and don't know what to do. Can someone help me please in the present.

  Thank you
  R ncira

  Have you installed a few applications which can be responsible for that?

  I can't imagine that the BSOD occurs after a clean install of Vista OS.

• Photosmart HP B210a more: HP Photosmart Plus B210a shows a blue screen with error B8145558 and restart.

  For two weeks now my HP Photosmart Plus B210a was wrong to behave. Until that time, I was a happy user, but since it says there is an error in the printer and that I should turn it works again.

  Putting out voltage is actually not possible using the button, as this will trigger a reboot, ending up on the same screen as before. During the start cycle, I have a brief moment where I can access the regular menu before it shows a blue screen with the B8145558 error code. 2 seconds after it is shown, a white screen appears with the title of printer error and the message to reboot.

  So far, I have cleaned the print head and the connections of all dirt and residues. I even managed to start and finish in a copy process, before it gives me the error. However, the error will come, and then it's over.

  Someone has encountered this problem before? Currently, I find only 1 reference to this error in Google and not on this site. Any suggestions that I could try?

  Hi @kootstra,

  From your description, I suspect there is a problem with the firmware that may be irreparable. We can try a reset, but because the printer will not stay on very long main screen until the error appears that we are not able to access the menu of support, we need to reset.

  I'll send you a PM (private Message), but before I do, please see the HP Privacy Statement.

  This privacy statement informs you of our privacy practices and the choices you can make about the way information about you and your online activity is collected and how that information is used. This statement is available on our homepage at the bottom of each web page of HP and HP.com.

  There are a growing number of messages in this forum and elsewhere in the internet with the steps to do a reset on different printers.  Reset to will sometimes fix problems, so resetting is not the issue.

  A few resets require you to enter key combinations to open special menus on your printer that you were supposed to never access.  These special menus are used by developers and staff support for debugging of problems, but they are not intended for inexperienced users and can have unexpected results.  A wrong button push and you might no longer have a printer, but rather an expensive paper weight.  On top of that, if you happen to the 'brick' the printer in this way, it is considered as customer induced damage and voids the warranty automatically. These resets are only intended to be distributed and used as a last resort and under the direct instruction of a representative of the HP technical support. They should not be made lightly!

  Reset the printer: what you need to know

  Please check the little envelope on the upper right of the forums page to check your Inbox of Forums.

  

• After installing lightroom cc, the photos show ok in library. When sent to develop module there is a blue screen with 2 white diagonal lines on pic. How is it removed?

  After installing lightroom cc, the photos show ok in library, but when the peak is selected and implemented development module, there is a blue screen with 2 diagonal lines white covering the picture. half of the photo will show when I put side by side feature on. How can I remove this blue screen.

  Edit/Preferences/Performance and uncheck "use graphics processor.

• Photo shows in the library but when I opened to develop that it shows a blue screen with a cross diaginal

  Photo shows in the library but when I opened to develop that it shows a blue screen with a cross diaginal

  Go to preferences > Performance tab and uncheck the option "use graphics processor. Adobe is aware of this problem and are studying, but in the meantime to uncheck this option should your unit develop problems.

• Satellite A350 - blue screen with error message

  At the start of windows7, I get a blue screen with error message 0 x 0000116.

  Can someone help please?

  It looks like a graphics driver is a troublemaker. Try to reinstall a graphics driver in SafeMode (f8 at startup). Read this article for more information:

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/eb584685-6b8b-4ad7-B6CC-ae5ee78095fb

  It is for VISTA but should be the same for win 7 too.

• Toshiba 32P2400EE - blue screen with message mono

  I have a toshiba tv LED serial number 32P2400EE. Accidentally when you press a button on the remote, it shows only a blue screen with a message of mono on the upper left.

  Please provide assistance.

  Hallo

  Have you tried to resolve your TV back to factory settings?

• How can I stop blue screen with stop error code (0x00000002, 0x00000000, 0x804e70ed)

  How can I stop blue screen with error code stop 0 x 00000050 (0xf05c371c, 0 x 0, 00000002 00000000, 0x804e70ed)

  If you are not real tied to the current installation of Windows - then a cloth and then reinstall are the best way to see if you can fix this

  Here's a suggestion on how to do a 'clean ': install
  [quote]
  For testing purposes, it is best to install Windows "clean".
  It is, basically, install the way that Microsoft intended (with the drivers from Windows Update).
  This procedure is for Windows 7, Vista is similar (but has 2 service packs)

  You will need your installation/recovery DVD (s) before you start.  Once you wipe the hard drive, there is no going back!

  1 back up all your data.
  It will wipe everything off of your hard drive, so what you want to keep should be backed up elsewhere.

  NOTE: If this is due to an infection, remember to analyze the data with current antivirus to another system to locate and remove malware.

  2. connect the system to the internet (if the system shows then disconnect from the Internet, do).

  3. use one of these free utilities to wipe the hard drive:
  DBAN ( http://www.dban.org/download )
  KillDisk ( http://www.killdisk.com/downloadfree.htm ).
  This will also remove the system recovery partitions - so the installation/restore DVD is essential!

  4 install Windows by booting from the installation/recovery DVD - DO NOT change any settings!

  5 visit Windows Update and get all updates

  6. check device for all unknown/disabled devices Manager - if there are unknown disabled devices, secure them with the latest drivers from the website of the manufacturer of the device (not the PC manufacturer)

  7 visit Windows Update and download the Service Pack 1 (normally under important updates).  Read these notes for installing SP1: http://support.microsoft.com/kb/2505743

  8 visit Windows Update and get any other available updates

  9 download, install and update a free antivirus, so it does not get infected during the test ( http://www.carrona.org/freeav.html ).

  If problems persist, then the problem is probably with your hardware.

  Warning: If you have an Asus motherboard, check the date on the file C:\Windows\System32\driver\ASACPI.sys.  2004/2005 is a problem, 2009,2010 is OK.  Updates are available on the Web from Asus site.

  Warning: If you have a Sony system, make sure that you do NOT have the 2007 version (or earlier) Extension of Firmware of Sony Analyzer (SFEP.sys).  To update this driver immediately!
  [/ quote]

• Constant blue screen with different messages (0 x 24 & 0x7B). Everything OK, but nothing works.

  System Setup: Dell Dimension E520
  250 GB, 2 GB of RAM, Core2Duo, WinXP Media Center diskette, DVD, DVD - RW (2 Bay), PCI graphics card, SATA opeartion = ON RAID in Bios (a single drive - Western Digital WDC WD2500JS).

  One night (three weeks ago, beginning of December), the computer froze.  I made a stop hard and rebooted.  Since then, he has been constantly showing the blue screen.  I get the blue screen different to different modes.  Here are some cases.

  1. If I do a Safe Boot (with command prompt) it stops on MUP.sys and then turn off for a second and then shows blue screen.
     This shows blue screen STOP: 0 x 00000024 (0 x 00190203, 0x89B8B8B0 , 0xC0000102, 0x00000000)
  2. If I do a Safe Boot (with networking) it makes a break on MUP.sys and then turn off for a second and then shows blue screen.
     This shows blue screen STOP: 0 x 00000024 (0 x 00190203, 0x892629F8 , 0xC0000102, 0x00000000)
  3. If I do a Safe Boot it stops on MUP.sys and then turn off for a second and then shows blue screen.
     This shows blue screen STOP: 0 x 00000024 (0 x 00190203, 0x89B8C8B0 , 0xC0000102, 0x00000000)
  4. To last good known cofiguration (shortly shows black screen Windows XP for the loading of components and then shows blue screen.
     This shows blue screen STOP: 0 x 00000024 (0 x 00190203, 0X894A28B0 , 0xC0000102, 0x00000000)
  5. If I Regularly Windows XP it stops after a black screen with the logo of Windows XP and then shows then the blue screen.
     This shows blue screen STOP: 0 x 00000024 (0 x 00190203, 0x89DEC9F8 / 0x89DEB9F8 / 0x89DD99F8 , 0xC0000102, 0x00000000) continues to change the middle number.

  I tried to boot from LiveLinux (OpenSuse) and it seems to work perfectly.  I am able to access all files and able to run memory tests.  Memtest passes all iterations of several that I did.  Furthermore, I used (provided with this high-end system) system diagnostic tools, and passes all the tests of memory, hard disk of the Office.  I did as well detailed tests.  Everything seems to work with Linux, and also for diagnostic tests, so I'm lead to believe that the material works very well.

  Then I tried to re - install the XP.  When I insert the XP Setup disk, it starts to load files and then displays the message 'Setup starts windows' for a few seconds, and until it reaches to show me any system selection prompt goes blue screen.
  This shows blue screen STOP: 0x0000007B (0xF78DA63C, 0xC0000034 , 0x00000000, 0x00000000)

  Because I can't get into any time except Linux, I'm really lost here.  I want to be able to start the windows mode that's before the crash, and now I'm lost.  Help, please.

  HI -.
  I was able to identify and solve the problem by fixing the MBR.  Since Linux working and Windows are not even in the installation program, it lead me to a clue.  I also enjoyed that it was a DELL machine.  So I basically ran a utility which sets the master boot record (MBR) and the partition information.  This allowed me to access the Dell restore partition.
  I could have checked once I fixed the MBR and tried to see if the problem is solved, but I missed it and simply returned in orginal factory State, once I was able to get the image-Ghost in the recovery partition.
  Thanks to Dan for the detailed documentation and the tool here:

  http://www.goodells.NET/dellrestore/fixes.htm

  I write this so that if anyone else runs into this can solve the problems.
  See you soon

• Module development of Lightroom 6: no picture but rather a blue screen with a cross on it. [was: something wrong with a program]

  Dear Sir.

  I just bought 6 Lightroom and download came as axpected. Although most of the modes worked well mode developing countries did not show the picture but rather a blue screen with a cross on it. I downloaded the program two times and it's always the same error. I thing there is a mistake in the program that you are selling.

  Below you will find a copy of the e-mail sent to me received following my purchase program th

  ID: < deleted by moderator>

  Bestallningsnummer: # < < deleted by moderator>

  > Bestallda technology:

  Adobe Photoshop Lightroom 6 (Mac/Win, Enska)

  < removed serial number >

  PLEASE HELP ME! OTHERWISE, I HAVE TO RETURN THE PROGRAM!

  GLENN

  Hi Glenn,.

  Try off the GPU acceleration under Preferences > Performance tab.

  Adobe Photoshop Lightroom Help | Lightroom GPU FAQ

  Kind regards

  Sumit Singh

• MacBook Pro screen displays a blue screen with the vertical line

  Hi, I have a problem with my macbookpro. When I try to start, the gray screen load with the apple logo and then turn to blue screen with vertical crosshairs.

  It would be useful that you mentioned EXACT model/year of your MBP and the current OSX.

  Ciao.

• WANT to PC dv7: at startup, I get a blue screen with a :( Your PC has encountered a problem and needs to restart.

  While I was using my laptop I received a message that HP was running some sort of program disagnostic and in the end, he asked if I wanted to repair the problems. I declined the offer. However, the next time I turned on the computer, I saw the first time the HP logo, then the message "automatic repair Preparation". After a few seconds there is a short rectangle that flashes on and disappears. Then I got a blue screen with: your PC encountered a problem and needs to restart. We will restart for you. "Who starts a blue screen and reboot cycle. Blue screens replacement error messages saying: "If you want to learn more, you can search online for later for this error" and once it will say 'FAT file system' and once 'NTFS file system. I have spent to support HP dv7 ENVY page and tried the suggestions of repair without success. Is it possible to go beyond these two error messages and their blue screens to get my system working again? If so, how?

  Hello

  Error code 24 characters is a failure of the short test (DST) disk Self and would indicate that hard is defective and must be replaced.  It is also consistent with your description of the problem.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - if necessary, you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are no longer under warranty, it's a fairly simple procedure to replace the HARD drive yourself - a brief guide on this is below.

  Readers on the following links are examples that would be perfect for your laptop.

  Hard drive 500 GB

  750 GB hard drive.

  1 TB laptop hard drive.

  The procedure to replace the hard drive begins on Page 56 of your maintenance & Service Guide.

  About reinstalling Windows 10 on new HARD drive, as long as the previous installation of Windows 10 had activated Ok after upgrading to Windows 7/8.1, you can simply create your own Windows 10 installation media and perform a new installation as described in the guide on the following link.  Note: On the activation screen, select "I have not a product key" - Windows will activate automatically once installation is complete.

  http://www.howtogeek.com/224342/how-to-clean-install-Windows-10/

  Kind regards

  DP - K

• Stuck on blue screen with Rainbow clouds, floating section did not help.

  As it is said.

  When I run Skype, it just goes straight to a blue screen with blue clouds and a rainbow green at the bottom. I get no login prompt. I followed various guides, such as the change of name login Login1, removal of connection, restart the computer, uninstall and then install Skype (which gets me an error code 2734, I think), uninstalled and installed Internet Explorer. I ran windows update and everything is up-to-date. I also followed the advice in the section floating, and even after using the command line (which was not in the Accessories folder, had to search for cmd to find) and reboot, "press this button" does not work.

  Skype worked fine on Sunday, and now it's broken. The only thing I've done in the meantime is run a repair tool for Windows Media Player as a game, I have installed required him to play in the music of the game.

  EDIT: I am using Windows 7.

  Is your Windows 32 bit or 64 bit?

  http://support.Microsoft.com/kb/827218

  What is the version of Internet Explorer installed on your computer?

  In Internet Explorer, go to help-> words of Internet Explorer.

• iPhone 5 shows blue screen and restarts automatically

  iPhone 5 shows blue screen and restarts automatically

  1. try to do a reset by pressing home and off/power button together until you see the Apple logo, then release

  2. If you can't do it you may need to restore the phone via iTunes

  (1079)

• Blocking of blue screen with the analog voltage (WinXP, PCI-6251)

  Hello

  I'm looking to solve a problem of blue screen with my measure blocking
  application, which I am developing with C++. Blocking seems manifest
  a little random after a variable amount (500-50 000) of voltage analog
  measures. My application needs to make a huge amount of these digitally
  trigger voltage measures after a certain period of time, and I'm using a
  unique
  task to do. The task is stopped and started after a single measure
  is
  which is done around 10 000 - 100 000 times per second. For this
  because I do synchronized with the PCI-6251 map data acquisition and
  one
  Ztec oscilloscope card. It seems that the probability of blocking could be
  associated with
  the frequency of measurements of voltage that I perform.

  The
  the app itself is multithreaded, but I'm blocking concurrent access
  TO
  the card with lock - all access to the card are behind a single mutex

  lock, so simultaneous access is blocked. In any case, all data acquisition
  access
  o the map is initially a single thread, which is dedicated to the acquisition of data
  operations.

  I also did stress tests with Ztec scope map, which does not
  result
  in all the problems. I also disabled in order of acquisition of Ztec map data
  TO
  Make sure that it wasn't the card scope, the origin of the problems - the problem
  persistent, so this seems to point towards the direction of the nidaq map.

  The deadlock appeared when I used the original supplied with drivers
  the
  card. I installed the latest drivers (removed the device from)
  ' Windows
  Device Manager and your application Measurement & Automation, reinstalled), but the blue screen still appears.

  Blue screen gives me a few debug data, but it does not mention any

  files .dll or something that would be of course point to a specific file (driver). I enclose at least partially matching code snippets.

  Hello again! I've been in contact with a local support person, who suggested that I have use DAQmx_Val_FiniteSamps instead of DAQmx_Val_HWTimedSinglePoint. I don't have any other changes, but this (see below) and the problem disappeared, so this seems to be an acceptable solution, because I don't see at all why not do this way. (Thanks Henry!)

  DAQmxErrChk (DAQmxCfgSampClkTiming (task_reader, NULL, 100000.0, DAQmx_Val_Rising, DAQmx_Val_HWTimedSinglePoint, 1));
  DAQmxErrChk (DAQmxCfgSampClkTiming (task_reader, NULL, 100000.0, DAQmx_Val_Rising, DAQmx_Val_FiniteSamps, 2));